A21_W91QVN-17-T-006001_Solicitation.pdf

411TH CSB, KOREA - CONST & SUPPLY TEAM

POC: MS. PARHM, LILLIAN DORICE

TEL: (02) 7914-6356

E-MAIL: LILLIAN.D.PARHM.CIV@MAIL.MIL

APO AP 96205-5289

UNITED STATES OF AMERICA (THE)

0011000060

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

1. The purpose of this amendment to to make corrections to the salient characteristics of CLIN 0001 and 0002.

2. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 05-Apr-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W91QVN-17-T-0060

X 9B. DATED (SEE ITEM 11)

04-Apr-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

05-Apr-2017

CODE

411TH CONTRACTING SUPPORT BRIGADE, KOREA

RCC YONGSAN, UNIT #15289

APO AP 96205-5289

UNITED STATES OF AMERICA (THE)

W91QVN 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W91QVN

FACILITY CODECODE

EMAIL:TEL:

W91QVN-17-T-0060

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

Global Changes

CLIN 0001 -- CLIN 0002

The CLIN extended description has changed from:

Table, Dining with leaf Size: 64.5"W x 53"D x 30"H Additional panel size: 14.2"W x 43"D x 1" (thickness) Dining table with 1 solid oak panel to adjust the size of table. Solid Oak wood, smoothly rounded edge, mortise and tendon constructed using glue and hardwood reinforcing cleats and screws. Top board is Minimum 30mm ply wood + Oak veneer + Solid Oak edge contains 1 Solid Oak panel to adjust the size of table. Leg: Solid Oak frame, 4 curvy legs.

No Joists of Surface. Color: TBD.

To:

Table, Dining with leaf Size: 64.5"W x 43"D x 30"H Additional panel size: 14.2"W x 43"D x 1" (thickness) Dining table with 1 solid oak panel to adjust the size of table. Solid Oak wood, smoothly rounded edge, mortise and tendon constructed using glue and hardwood reinforcing cleats and screws. Top board is Minimum 30mm ply wood + Oak veneer + Solid Oak edge contains 1 Solid Oak panel to adjust the size of table. Leg: Solid Oak frame, 4 curvy legs.

No Joists of Surface. Color: Cherry Oak..

The following have been modified:

INSTRUCTION TO OFFERORS

ADDENDUM TO FAR 52.212-1, INSTRUCTIONS TO THE OFFEROR(S)

QUOTATION INFORMATION & REQUIREMENT (ADDENDUM TO FAR 52.212-1, INSTRUCTIONS TO

THE OFFEROR(S)

1. Quotations shall be submitted to FBO.gov. The technical proposal for specification shall include the company name. All Questions should be emailed to lillian.d.parhm.civ@mail.mil within 3 days after the RFQ is issued. The electronic quotation shall be submitted by 1300 hours on the closing date of RFQ. Offeror shall submit samples to Gate 19 (Old Gate 20) at 0900 AM on the closing date of RFQ IAW caluse 52.214-20. Ship-to address for the required samples is below:

HanGangRo 1Ka, US Army, YongSan, Seoul, Korea Camp Coiner, Gate 19 (Next to YongSan High School)

APO AP 96205‐5289, UNIT No. 15289 411th Contracting Support Brigade, Bldg #1130 Construction & Supply Division, Team #3 ATTN: Lillian “Denise” Parhm

(DSN) 724‐6356, (COMM) (011‐82‐2) 7914‐6356

2. The quotation(s) shall include the following requirements IAW Para 1 above.

a. Technical Factor

b. Past Performance

c. Price Factor

3. The contractor shall submit the detailed specification for the proposed items along with the quotation, even if the quoter proposed the same item. Quoters who fail to submit all of the specified information will not be considered for award.

4. Partial delivery and partial payment are acceptable.

5. Closing date and time: 14 April 2017 at 1300 (Korea local date and time). Quotation submitted without sample being provided at 0900 on closing date of RFQ will be considered nonresponsive.

6. Special Instructions: All tables should meet the following salient characteristics:

Table, Dining with leaf Size: 64.5"W x 43"D x 30"H Additional panel size:

14.2"W x 43"D x 1" (thickness) Dining table with 1 solid oak panel to adjust the size of table. Solid Oak wood, smoothly rounded edge, mortise and tendon constructed using glue and hardwood reinforcing cleats and screws. Top board is Minimum 30mm ply wood + Oak veneer + Solid Oak edge contains 1 Solid Oak panel to adjust the size of table. Leg: Solid Oak frame, 4 curvy legs. No Joists of Surface. Color: Cherry Oak.

a. Material Compliance: All materials should be ‘Solid America White Oak Wood’. All materials shall be new and the product made by recycled material is not acceptable. All the wood painting material for furniture is required to match by Environment E0 grade.

b. Prohibited Materials: Particle Board (PB) and Medium Density Fiberboard (MDF) shall not be used in any furniture.

c. Sample: Bidders should be furnish bid samples upon request by the Contracting Officer as part of the bid.

The Government will test or evaluate bid samples to determine compliance with all the characteristics listed for examination in this solicitation. If the bidder fails to submit samples on time, the Government will reject the bid. Bid samples will be furnished with no expense to the Government and returned at the bidder’s request and expense, unless they are destroyed during pre‐award testing.

d. Bid sample item: Bidders should furnish bid samples for line items 0001 and 0002 (NO COATING & NO

PAINTING).

e. The samples will be returned, but it is the vendor responsibility to picked up the samples within 3 days after the vendor was notified from the Contract Specialist or Contracting Officer.

BASIS OF AWARD

The Government will award a contract resulting from this solicitation to the responsible offeror having submitted the lowest-priced, technically acceptable offer that satisfies all terms and conditions of this solicitation. The following factors shall be used to evaluate quotations:

►Factor A. Technical: Based upon Salient Characteristics in this solicitation.

►Factor B. Past Performance (see DFARS 252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System--Statistical Reporting in Past Performance Evaluations)

►Factor C. Price

Note 1: To be determined responsible, a prospective contractor must meet FAR 9.104-1 General standards.

Note 2: To be determined technically acceptable, the submitted specification must meet salient characteristics stated in this solicitation.

Note 3: Multiple awards will not be made.

(End of clause)

(End of Summary of Changes)