AMENDMENT_0001_to_W91QF0-16-T-2888.pdf

AMENDMENT 0001 to Combined Solicitation/Synopsis W91QF0-16-T-2888

The Purpose of this Amendment 0001 to Solicitation W91QF0-16-T-2888 is to Include Building 950 and

951 known wear and tear issues currently existing on the moveable shelving carriages/tracks. The attached list represents an estimate of the current state of the shelving system as of 22 February 2016 and is not a binding document. The state of the shelving systems are subject to change at any time due to normal everyday usage/wear and tear. Existing wear and tear related issues will be covered under

Corrective Maintenance CLIN 0002.

ACKNOWLEDGMENT OF THIS AMENDMENT IS REQUIRED.

Building 950 and 951 Issues are on the following three pages of this Amendment.

Bldg 950 Issues as of 22 Feb 2016

Location/Rm Rows L (#'s) R (#'s) Issue

Bay 1/Rm 154 L (38‐21) R (20‐1) Issue X X Alignment & PM 29‐28 Locked down to prevent movement, grinding 35‐34 front control panel is loose

Bay 2/Rm 155 L (74‐57) R (56‐41) Issue X X Alignment & PM

43‐42 Locked down to prevent movement, grinding 45‐44 Locked down to prevent movement, grinding

61‐60 Locked down to prevent movement, grinding 63‐62 Rear Control Panel not operating correctly

Bay 3/Rm 156 L (109‐93) R (92‐77) Issue X X Alignment & PM

87‐86 Locked Down to prevent movement, grinding 89‐88 Locked Down to prevent movement, grinding

99‐98 Locked Down to prevent movement, grinding 101‐100 Locked Down to prevent movement, grinding

Bay 4/Rm 237 L (149‐133) R (132‐114) Issue X X Alignment & PM 145‐144 Locked Down to prevent movement, grinding, roller issue front side 146/147 pops when moved left or right

122/123 jumps sightly when all rows to right it are moved 124/125 squeaks bad to right, towards 122/123, jumps when 126/127 &128/129 & 130/131 moved left or right 126/127 squeaks bad to right 128/129 scrap/squeak when moved to right

Bay 5/Rm 238 L (188‐171) R (170‐153) Issue X X Alignment & PM

165‐164 Row attempts to continue after closure, must push stop to disengage 166/167 Rear Control unit‐ non responsive buttons, button fail ‐ unresponsive at first and broken on pad.

169‐168 Locked Down to prevent movement, grinding

158/159 Front & Rear Control unit‐ non responsive buttons at first, left or right 154/155 Rear Control unit‐ move button broken on pad, catches in the middle of move both directions

172/173 Front control unit‐ No sound (no beep) 174/175 Stops moving before end of cycle, odd sound 177‐176 Locked Down to prevent movement, grinding

Bay 6 Vault/Rm 241 L (225‐207) R (204‐191) Issue X X Alignment & PM

195‐194 Possible alignment issue, missing 2 rollers, grinds when movement to right

MHI Holding Rm 219 Issue

9‐2 PM

X

Bldg 951 Row Issue as 11 Feb 2016

Bay 111/112 Issue

X PM

Active Rusty Rails 3‐4 Rough travel. Did have abrupt stop, loud bang from far end, jolting stop. Has occasional movement failures 3‐4,7‐8,10 Replace 5 damaged and missing rubber bumpers.

11‐12 movement failures, error light. Yellow light constantly flashes.

Art Rack Rows‐ Last rows scrape floor.

Office/Rm 133 Issue

X PM

Stacks frequently stop when moving from right most position.

Control pad Unit stops about 4 feet from end. Requires to moved rows one at a time