A03 - CDRL A0003 Management GFP.pdf
PDF 225 KB Posted
- Attached to
- Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services
- Solicitation number
- W91CRB-27-R-A002
About this file
This is a DD Form 1423-1, Contract Data Requirements List, specifying one data item requirement for a federal contract with the Aberdeen Test Center.
The required data item is a Government Property (GFP and CAP) Report (Data Item A003), defined under DID DI-MGMT-80441D, with reference to PWS section 3.4.3. The report must be a multipart Master Report delivered electronically in Microsoft Office Excel format with separate tabs for Government Furnished Property (GFP) and Contractor Acquired Property (CAP). Each property type section shall be further detailed by classification: Equipment, Material, Special Test Equipment, and Special Tooling. The report must include specified data elements at minimum: Name, Part Number, Description (manufacturer and model number), National Stock Number, Quantity received/fabricated/issued/balance-on-hand, Unit Acquisition Cost, Unique-item identifier or serial number, Unit of Measure, Accountable Contract Number, Location, Disposition, Posting reference and date, Date placed in service, Government Property Type, Classification, and Supply Condition Code per DoD 4000.25-2-M AP2.5. Abbreviations are not permitted in the report.
Submission requirements specify an annual frequency with initial submission due 60 calendar days from contract award and subsequent submissions every 6 to 12 months thereafter. Final submission is due within 90 calendar days of contract completion or termination and must include reutilization and disposition recommendations. The report is required in final form only (no draft approval required), with distribution to the Contracting Officer Representative (COR), Contracting Officer, and Property Book Officer (one copy each, totaling three copies). The form was prepared by Scott Sattler on 10/15/2026 for a contract to be determined (TBD) relating to Welding, Machining, Painting, and Fabric work.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
16. REMARKS (Continued)
DD FORM 1423-1, FEB 2001 Page of Pages
INSTRUCTIONS FOR COMPLETING DD FORM 1423
(See DoD 5010.12-M for detailed instructions.)
FOR GOVERNMENT PERSONNEL
Item A. Self-explanatory.
Item B. Self-explanatory.
Item C. Mark (X) appropriate category: TDP - Technical Data Package;
TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.
Item D. Enter name of system/item being acquired that data will support.
Item E. Self-explanatory (to be filled in after contract award).
Item F. Self-explanatory (to be filled in after contract award).
Item G. Signature of preparer of CDRL.
Item H. Date CDRL was prepared.
Item I. Signature of CDRL approval authority.
Item J. Date CDRL was approved.
Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.
Item 2. Enter title as it appears on data acquisition document cited in Item 4.
Item 3. Enter subtitle of data item for further definition of data item (optional entry).
Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.
Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).
Item 6. Enter technical office responsible for ensuring adequacy of the data item.
Item 7. Specify requirement for inspection/acceptance of the data item by the Government.
Item 8. Specify requirement for approval of a draft before preparation of the final data item.
Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).
Item 10. Specify number of times data items are to be delivered.
Item 11. Specify as-of date of data item, when applicable.
Item 12. Specify when first submittal is required.
Item 13. Specify when subsequent submittals are required, when applicable.
Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.
Item 15. Enter total number of draft/final copies to be delivered.
Item 16. Use for additional/clarifying information for Items 1 through 15.
Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.
FOR THE CONTRACTOR
Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.
a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.
Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.
b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.
Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.
c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.
Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.
d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.
Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.
Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.
These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.
DD FORM 1423-1 (BACK), FEB 2001
| data_item: A003 |
| title: Government Property (GFP and CAP) Report |
| sub: Master Report of GFP and CAP |
| auth: DI-MGMT-80441D |
| ref: PWS 3.4.3 |
| req_ofc: Aberdeen Test Center |
| dd250: LT |
| appcode: A |
| dist: D |
| freq: See Block 16 |
| asof: |
| firstsub: Block 16 |
| subsub: Block 16 |
| addressee1: COR |
| draft1: |
| reg1: 1 |
| repro1: |
| addressee2: Contracting Officer |
| draft2: |
| reg2: 1 |
| repro2: |
| addressee3: PROP BOOK OFFCIER |
| draft3: |
| reg3: 1 |
| repro3: |
| addressee4: |
| draft4: |
| reg4: |
| repro4: |
| addressee5: |
| draft5: |
| reg5: |
| repro5: |
| addressee6: |
| draft6: |
| reg6: |
| repro6: |
| addressee7: |
| draft7: |
| reg7: |
| repro7: |
| addressee8: |
| draft8: |
| reg8: |
| repro8: |
| addressee9: |
| draft9: |
| reg9: |
| repro9: |
| addressee10: |
| draft10: |
| reg10: |
| repro10: |
| addressee11: |
| draft11: |
| reg11: |
| repro11: |
| addressee12: |
| draft12: |
| reg12: |
| repro12: |
| addressee13: |
| draft13: |
| reg13: |
| repro13: |
| addressee14: |
| draft14: |
| reg14: |
| repro14: |
| addressee15: |
| draft15: |
| reg15: |
| repro15: |
| addressee16: |
| draft16: |
| reg16: |
| repro16: |
| addressee17: |
| draft17: |
| reg17: |
| repro17: |
| addressee18: |
| draft18: |
| reg18: |
| repro18: |
| addressee19: |
| draft19: |
| reg19: |
| repro19: |
| addressee20: |
| draft20: |
| reg20: |
| repro20: |
| addressee21: |
| draft21: |
| reg21: |
| repro21: |
| addressee22: |
| draft22: |
| reg22: |
| repro22: |
| addressee23: |
| draft23: |
| reg23: |
| repro23: |
| addressee24: |
| draft24: |
| reg24: |
| repro24: |
| addressee25: |
| draft25: |
| reg25: |
| repro25: |
| addressee26: |
| draft26: |
| reg26: |
| repro26: |
| addressee27: |
| draft27: |
| reg27: |
| repro27: |
| addressee28: |
| draft28: |
| reg28: |
| repro28: |
| addressee29: |
| draft29: |
| reg29: |
| repro29: |
| addressee30: |
| draft30: |
| reg30: |
| repro30: |
| addressee31: |
| draft31: |
| reg31: |
| repro31: |
| addressee32: |
| draft32: |
| reg32: |
| repro32: |
| addressee33: |
| draft33: |
| reg33: |
| repro33: |
| addressee34: |
| draft34: |
| reg34: |
| repro34: |
| addressee35: |
| draft35: |
| reg35: |
| repro35: |
| addressee36: |
| draft36: |
| reg36: |
| repro36: |
| addressee37: |
| draft37: |
| reg37: |
| repro37: |
| addressee38: |
| draft38: |
| reg38x: |
| repro38: |
| total_draft: 0 |
| total_reg: 3 |
| total_repro: 0 |
| remarks: Master Report (MR) will be a multipart report that includes discernible sections for the two Government Property types: Government Furnished Property (GFP) and Contractor Acquired Property (CAP). Each type of Government Property (i.e. GFP and CAP) section shall be further detailed by Government Property classification (i.e. Equipment, Material, Special Test Equipment and Special Tooling) . The MR shall be delivered electronically in a spreadsheet using Microsoft Office Excel. Abbreviations are not allowed. Separate tabs within the excel spreadsheet shall be utilized; one tab will be used to report GFP and one tab will be used to report CAP. |
Block 4: The DID format is relevant to GFP component of multipart report. Format necessarily determined by reporting elements included in the terms and conditions of the contract and other guidance.
Block 10: Frequency Annually.
Block 12: Initial submission will be (60 calendar days upon Block 10 determination) from contract award.
Block 13: Subsequent submissions will be every (Six to 12 months depending upon Block 12 determination) from previous submission. Final submission will be within 90 calendar days of contract completion/termination and shall include reutilization/disposition recommendations.
The MR shall consist of the following data elements at a minimum: Name, Part Number, Description (including manufacturer and Model Number, if assigned), National Stock Number (additional cataloging may be required), Quantity received (or fabricated), issued, and balance-on-hand, Unit Acquisition Cost, Unique-item identifier or equivalent (serial number), Unit of Measure, Accountable Contract Number, Location, Disposition, Posting reference and date of transaction, Date placed in service, Government Property Type: Government Furnished Equipment (GFP) or Contractor Acquired Property (CAP), Classification of Government Property (i.e. Equipment, Material, Special Test Equipment, Special Tooling), and Supply Condition Code (See DoD 4000.25-2-M AP2.5).
| group: | |
| total_price: | |
| prep_name: Scott Sattler | |
| line_item: | |
| exhibit: | |
| xtdp: Off | |
| xtm: Off | |
| othercat: MGMT | |
| system: Welding, Machining, Painting, and Fabric | |
| ctr_no: TBD | |
| contr: TBD | |
| remarksb: | |
| Page2: | |
| Reset: | |
| 2026-10-15T12:43:52-0400 | |
| SATTLER.SCOTT.J.1397584298 |
| prep_date: 10/15/2026 |
| app_by: |
| app_date: |
| Page: |
| of_pages: |
| app: Adobe Professional 8.0 |
File details come from the government source that posted it. Updated .