W9133L-16-B-0001_0002.pdf

F7K3SQ6068A002 KJAQ099058

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Project Title: Replace Fire Station - New Aircraft Rescue and Fire Fighting Facility ANG Project Number: KJAQ099058 This amendment is issued to:

- Add SECTION 33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION

- Incorporate minor revisions to the plans and specification as show n on Block 14, Continuation Page.

All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Feb-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W9133L-16-B-0001

X 9B. DATED (SEE ITEM 11)

20-Dec-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Feb-2017

CODE

NGB-AQ - W9133L

111 SOUTH GEORGE MASON DR

BLDG. 2, 4TH FLOOR

ARLINGTON VA 22204-1373

W9133L 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W9133L-16-B-0001

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0003

CHANGES TO THE SPECIFICATION

The following change is made to the specification.

ADD the Following Specification, attached, in its entirety

SECTION 33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION

The following changes are made to the specification without reissuance.

00 01 10 TECHNICAL SPECIFICATIONS TABLE OF CONTENTS

- REPLACE “07 11 13 BITUMINOUS DAMPROOFING” WITH “07 11 13 BITUMINOUS

DAMPROOFING- WEATHER BARRIER”

Under DIVISION 33 – UTILITIES

- ADD “33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION”

SECTION 03 30 00.00 10 CAST-IN-PLACE CONCRETE

- In Paragraph 2.1.3 DELETE “…but may not exceed the specified strength at the same age by more than

20%.”

SECTION 07 11 03

- CHANGE TITLE FROM “BITUMINOUS DAMPPROOFING” TO “BITUMINOUS DAMPROOFING-

WEATHER BARRIER”

- ADD the following paragraph “1.5 Weather Barrier This section applies to all areas in the drawings that indicates Weather Barrier for the installation over

CMU.”

SECTION 26 20 00 INTERIOR DISTRIBUTION SYSTEM

- DELETE Paragraph 3.1.14 in its entirety. Subsequent paragraphs will not be renumbered.

SECTION 28 20 00.00 20 ELECTRONIC SECURITY SYSTEM (ESS), COMMERCIAL

- REPLACE “NAVFAC” WITH “Government” throughout the entire specification section.

- REPLACE Paragraph 1.4 - SYSTEM DESCRIPTION in its entirety.

REPLACE WITH THE FOLLOWING

“Paragraph 1.4 - SYSTEM DESCRIPTION Provide new Electronic Security System that is manufactured by the same company as the existing system utilized on the base, including associated equipment and appurtenances. The design of the ESS shall include devices and equipment used to detect intrusion, control access to restricted areas, detect and deny unauthorized entries within specific areas, generate reports, produce Photo Identification badges, provide surveillance and annunciate alarms. The ESS shall be designed to provide operational flexibility and reliable performance. The ESS shall be modular, allowing for future incremental expansion or modification of inputs, outputs, and remote control stations. Integrated system capabilities shall include but not be limited to Intrusion Detection, Automated Access Control, Intercommunications, CCTV and Photo Badge Identification. Each system shall be complete and ready for operation and provide for a fully integrated central station solution. Existing system was manufactured by Advantor, and new equipment shall be from this manufacturer only. Include materials not normally furnished by the manufacturer with the ESS equipment as specified in Section 26 20 00 INTERIOR DISTRIBUTION SYSTEM.”

SECTION 32 13 13.06 PORTLAND CEMENT CONCRETE PAVEMENT FOR ROADS AND SITE

FACILITIES

- DELETE Paragraph 2.1.3.1 Alkali Reactivity Test in its entirety. Subsequent paragraphs will not be renumbered.

CHANGES TO THE DRAWINGS

The following changes are made to the drawings without reissuance.

C-103 SITE PLAN

- Note 5 REPLACE “The reinforcement shall be approximately 2 In. from the bottom of the slab” WITH “For reinforcement clearance at the bottom of the slab, see details on sheet C-112”

C-106 STORM DRAIN PLAN

- INCORPORATE the attached sketches noted as C-106 SK 1 and C-106 SK 2

C-109 UTILITY PLAN

- ADD the following note to the drawing “All gas piping from the meter service connection to the existing gas main is by the Utility Company and not to be included in the bid. Coordination with the Utility Company and scheduling of their installation of the gas line shall be included in the Bid. See attached Sketch C-109 SK 1”

- INCORPORATE the attached sketches noted as C-109 SK 1

C-115 IN-PAVEMENT EDGE LIGHT IN CONCRETE

- IN DETAIL 1 under STAINLESS STEEL CABLE TAG (TYP.) REMOVE “SEE DETAIL 7 SHEET E407”

L-101 LANDSCAPE PLANS

- Near Dumpster REPACE “S-502” WITH “S-201”

A-401 ENLARGED FLOOR PLANS

- In DETAIL A1/A-402 RESTROOM CORE, LABEL Shower located below SHOWER 3 AS “SHOWER 4

DETAIL C2/A-520”

T 001 Technology Site Plan

- DETAIL A4

a. REPLACE “ITN BLDG 223”

WITH “ITN BLDG 210”

b. Note on Line between MH 50 to IN BLDG 331

REPLACE “12 STRAND OSP SINGLEMODE FIBER 100 PAIR OSP COPPER”

WITH “12 STRAND OSP SINGLEMODE FIBER FROM MH 50 to Building 331, APPROXIMATELY 1032 LINEAR FEET.”

c. Note on line between MH 50 and ITN BLDG 210

REPLACE “12 STRAND OSP SINGLEMODE FIBER 100 PAIR OSP COPPER”

WITH “12 STRAND OSP SINGLEMODE FIBER AND 100 PAIR OSP COPPER FROM MH

50 TO BUILDING 210, APPROXIMATELY 2645 LINEAR FEET”

E-601 ELECTRICAL ONE-LINE DIAGRAM

- ADD “ATS SHALL BE PROVIDED WITH A 800 AMP CIRCUIT BREAKER” on the Emergency Line side in addition to the circuit breaker shown on the Utility (Service) line side.

(End of Summary of Changes)