A7_W912PQ16T0024-U0001_MOD.pdf

W912PQ-16-T-0024

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to incorporate both the most current Wage Determination and Performance Work Statement. No other changes w ere made.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 32

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Apr-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912PQ-16-T-0024

X 9B. DATED (SEE ITEM 11)

12-Apr-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Apr-2016

CODE

W912PQ- 107TH AW/MSC

9910 BLEWETT AVE

NIAGARA FALLS NY 14304-6001

W912PQ 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been added by full text:

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK

STATEMENT

FOR

GROUNDS MAINTENANCE

SERVICES

At

EASTERN AIR DEFENSE

SECTOR

PROJECT #: GRCL-16-0011 DATE: 21 March 2016

MOWING AND TRIMMING

PART 1 PERFORMANCE WORK

PART 2 TECHNICAL EXHIBITS

PERFORMANCE

WORK

MOWING AND TRIMMING

PERFORMANCE WORK STATEMENT

TABLE OF CONTENTS

SECTION TITLE PAGE

C-1 GENERAL INFORMATION 4

1.1. SCOPE OF WORK 4

1.2. CONTRACTOR PERSONNEL 4

1.3. PHYSICAL SECURITY 5

1.4. HOURS OF OPERATION 5

1.5. ENVIRONMENTAL CONTROLS 5

1.6. POLLUTION ABATEMENT 6

C-2 DEFINITIONS 7

2.1. GENERAL DEFINITIONS 7

2.2. TECHNICAL DEFINITIONS 7

C-3 CONTRACTOR-FURNISHED ITEMS AND SERVICES 10

3.1. GENERAL INFORMATION 10

3.2. CONTRACTOR-FURNISHED VEHICLES 10

3.3. CONTRACTOR-FURNISHED EQUIPMENT & TOOLS 10

C-4 SPECIFIC TASKS 12

4.1 GENERAL INFORMATION

4.2 SECURITY 12

4.3. MAINTAIN IMPROVED GROUNDS 12

4.4. MAINTAIN SEMI-IMPROVED GROUNDS 13

4.5. SPRING GROUNDS CLEANUP 13

4.6. FALL GROUNDS CLEANUP 13

C-5 5.1 CMRA REPORTING 14

TE 1 STANDARD FOR GROUND MAINTENANCE 15

QA 1 QUALITY ASSURANCE 16

SECTION C-1

GENERAL INFORMATION

1.1. SCOPE OF WORK. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform Grounds Maintenance as defined in this performance work statement (PWS) at Eastern Air Defense Sector (EADS). The contractor shall perform to the standards in this contract. Performance Period: 1 May 2016 through 30 Nov. 2016.

1.2. CONTRACTOR PERSONNEL:

1.2.1. Contract Manager. The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate or alternates, who shall act for the contractor when the manager is absent, shall be designated in writing to the contracting officer prior to the contract start date.

1.2.1.1. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract.

1.2.1.2. The contract manager and alternate or alternates must be able to read, write, speak, and understand the English language.

1.2.2. Contractor Employees.

1.2.2.1. Contractor personnel shall present a neat appearance.

1.2.2.2. Personnel operating motor vehicles must possess a valid state driver license.

1.2.2.3. The contractor shall not employ any person who is an employee of the United States Government if employing that person would create a conflict of interest or the appearance of a conflict of interest. Additionally, the contractor shall not employ any person who is an employee of the Department of the Air Force, either military or civilian, unless such person seeks and receives approval according to DoD R 5500.7, Joint Ethics Regulations (JER). The contractor shall not employ any person who is an employee of the Department of the Air Force if such employment would be contrary to the policies in AFI 64-106, Air Force Industrial Labor Relations Activities.

1.2.2.4. The contractor is cautioned that off-duty active military personnel hired under this contract may be subject to permanent change of station, change in duty hours, or deployment.

Military Reservists and National Guard members may be subject to recall to active duty. The abrupt absence of these personnel could adversely affect the contractor's ability to perform;

however, their absence at any time shall not constitute an excuse for non-performance under this contract.

1.2.3. Employee Training:

1.2.3.1. The contractor shall ensure employees are properly trained and qualified to safely operate ground maintenance equipment before assigning employees to tasks that require use of the equipment.

1.2.3.2. The contractor shall provide environmental, health, and safety training to ensure compliance with all federal, state, and local laws or regulations.

1.3. PHYSICAL SECURITY. The contractor shall safeguard all government property IAW AFI 31-209, The Air Force Resource Protection Program and controlled forms provided for contractor use. At the close of each work period, vehicles, facilities, support equipment, and materials shall be secured. The contractor shall designate a custodian(s) and alternate(s) to receipt for and account for government-furnished facilities and equipment.

1.3.1. Reserved.

1.4. HOURS OF OPERATION:

1.4.1. Hours of Operation. The contractor shall perform the services required under this contract during the following hours:

1.4.1.1. Normal Operations. Normal Operation is Monday through Friday, 0700- 1600, except for Federal holidays. The contractor may work, with prior approval of the Contracting Officer, extended hours to ensure timely completion of work at no additional cost to the government.

1.4.1.2. Federal Holidays. The following is a list of Federal Holidays observed by this installation:

New Year's Day, Martin Luther King's Birthday, President's Day, Memorial Day, July 4, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, and Christmas Day.

1.4.1.3. Hours of Operation Other Than Normal. There will be mission situations that require the contractor to work other than normal hours. Some of these situations are military exercises, contingency operations, or weather emergencies. When the contractor's access to a work area conflicts with an Air Force mission requirement, the contractor shall schedule the work to minimize the disruption. Such scheduling may require work to be accomplished at times other than normal duty hours.

1.5. ENVIRONMENTAL CONTROLS:

1.5.1. Compliance with Laws and Regulations. The contractor shall be knowledgeable of and shall comply with all applicable federal, state, and local laws, permits, DoD, Air Force, and EADS environmental requirements and instructions. The contractor shall ensure policies and procedures are established that protect the health and safety of employees and the community to minimize or eliminate the risk of environmental pollution.

1.5.2. Notification of Environmental Spills. If the contractor spills or releases any substance listed in 40 CFR 302 into the environment, the contractor shall immediately report the incident to the Civil Engineer 1AW local procedures and notify the inspector or in his or her absence the FAC. Incidents involving radioactive materials will be reported IAW AFPD 40-2, Radioactive Materials (Non-Nuclear Weapons) and AFI 40-201, Managing Radioactive Materials in the USAF. The contractor shall be liable for containment and environmental clean up of the spill or release of such substance.

1.5.3. The contractor is responsible for advising his employees of all Environmental and Hazardous Materials Handling and is also required to have and maintain Material Safety Data Sheets (MSDS) for all materials used by the contractor in accordance with federal and state laws and/or regulations. (Reference AFI 91-301, Air Force Occupational and Environmental Safety, Fire Prevention and Health (AFOSH) Program and Occupational Safety and Health Administration (OSHA) requirements)

1.6. POLLUTION ABATEMENT. The Contractor shall perform all work in accordance with federal, state and local environmental regulations, (including maintenance of Materials Safety Data Sheets (MSDS's) IAW applicable EPA regulations and criteria so as to minimize pollution, exploitation and degradation of natural resources). In addition, the following requirements shall be mandatory.

1.6.1. Transporting debris or policed materials from the site shall be accomplished in a manner preventing particles from becoming airborne: such as covered vehicles or enclosed dumpster boxes. Vehicles used for pesticide applications will carry an approved spill containment kit capable of containing any spill until first responders arrive.

1.6.2. Burning of any material by the Contractor is prohibited.

1.6.3. Stream beds, lakes, drainage ways, sanitary and storm sewers, etc. shall not be polluted by fuels, acids, pesticides or other harmful materials. If any of these materials are inadvertently spilled into these areas, the Contractor shall immediately notify the inspector, or Fire Department (336-1234) if inspector is unavailable.

1.6.4. Pesticides used at EADS Site shall be approved in advance and in writing by the CO and Civil Engineer Environmental Section through the inspector. The Contractor shall strictly follow all label requirements. The Contractor shall not illegally dump or dispose of any pesticides. The Contractor shall follow pesticide label directions and shall not spray pesticides if the wind is exceeding 7 MPH.

1.6.5. The Contractor shall ensure that his operations do not expose any personnel to any hazardous conditions (i.e. noise, chemicals, etc.) as covered by OSHA/AFOSH Standards.

SECTION

C-2

DEFINITIONS

2.1. GENERAL DEFINITIONS:

2. 1. 1. Defective Service. A service output that does not meet the standard of performance specified in the contract for that service.

2.2. TECHNICAL DEFINITIONS:

2.2.1. Debris. Objects that are unsightly or present obstacles to mowing and other grounds maintenance operations. Any silt, sand, rocks, or soil deposited by wind, personnel, equipment, or water runoff on all sidewalks, roadways, and terraces. Rocks in lawn areas. Wind and storm damage items. Debris shall also include tree limbs, dry bush, rodent habitats, sand, stones, leaves, etc.

2.2.2. Edging. The cutting of overhanging vegetation away from the hard surface (curbs, sidewalks, driveways, etc.) to include actual depth penetration of soil.

2.2.3. Grass. Botanical, any plant of the Grameneae family, which is characterized by narrow, leaves with parallel veins. The leaves are composed of blade, sheath, and ligules. The plants have jointed stems and fibrous roots and inconspicuous flowers usually arranged in spikelets.

2.2.4. Grass Maintenance. The cultural practices required to provide disease and pest free grasses.

This work includes, but is not limited to, mowing, irrigating, reporting of insects and disease, aerating, edging trimming, raking, and policing.

2.2.5. Grass/Weed Trimming. The cutting of grass and weeds, with the appropriate equipment, in areas that are inaccessible to mowers due to obstacles.

2.2.6. Hedge. A row of bushes, conifer trees, or trees planted close together forming a barrier or boundary.

2.2.7. Improved Grounds. Grounds on which intensive development and maintenance measures are performed. This category normally applies to areas within the built-up section of an installation which contains lawns, landscaping, rock beds, plant beds, flower beds, parade grounds, and athletic facilities.

2.2.8. Leaf. A lateral outgrowth from a stem that constitutes a unit of the foliage of a plant and functions primarily in food manufacture by photosynthesis and has numerous sizes, shapes and colors.

2.2.9. Manufacturer's Specifications. Technical information provided by the manufacturer specifying equipment, operating parameters, and recommended maintenance requirements.

2.2.10. Mulching Mower. Engineer designed/manufactured rotary mower for the purpose of mowing and mulching grass clippings.

2.2.11. Obstacle. A tree, post, building or any object that rises from the ground. If any object such as a tree limb or parts of a limb is less than 12 inches from the ground, then the limb or parts of the limb become the outside perimeter of the obstacle.

2.2.12. Perennial Flower. A plant (including the roots) cultivated for its blossoms that lives more than one year. Includes bulbs, vines, ground covers and ornamental grass.

2.2.13. Pesticide. Any substance or mixture of substances, including biological control agents, that may prevent, destroy, repel, or mitigate pests and are specifically labeled for use by the U.S.

Environmental Protection Agency (EPA).

2.2.14. Plant Bed. An area consisting of concentrated shrubs, broadleaf evergreens, flowers or deciduous or conifer trees. Plant beds may contain rock, wood mulch, bark chips or peat moss at a 3" depth as a surface ground cover. Plant beds are normally surrounded by edging such as;

steel, wood, concrete, brick, rubber, or moss rock.

2.2.15. Planter. Government furnished container to which the contractor shall prepare with the appropriate materials, (topsoil, mulch, fertilizer, etc.) in order to plant spring and fall flowers.

2.2.16. Plant Growth Regulator. Any compound used to inhibit the growth of selected plant species without harming desirable vegetation.

2.2.17. Policing Grounds. The pickup and disposal of debris and litter, such as paper, bottles, cans, cardboard, plastic containers, rags, tree limbs, branches, twigs, broken glass, chunks of concrete, black top, sod, leaves, tumbleweeds, dead animals, paper and plastic hung in trees or fences, and other items identified by inspector(s) as trash.

2.2.18. Preventive Maintenance (PM). Maintenance actions performed to prolong useful life.

Preventive Maintenance includes, but is not limited to, disease and rodent prevention, and actions to prevent wilting, and discoloration.

2.2.19. Prune. The selective or discriminate removal of dead, dying, diseased, live interfacing, objectionable and weak branches in a scientific manner.

2.2.20. Quality Control Inspector (QCI). The individual employed by the contractor responsible to insure the quality control of the tasks outlined in this PWS. Also identifies, in writing, all defective performance and meets with the inspector.

2.2.21. Real Property. Lands, buildings, structures, utility systems, improvements, landscape and appurtenances thereto.

2.2.22. Removal. To transfer or move something from where it is to an acceptable area.

2.2.23. Rolled. Passed over, in three different directions, with a lawn roller weighing a minimum of 150 pounds (either a hand or riding type).

2.2.24. Semi-Improved Grounds. Areas coded as such at Technical Exhibit 2. Grounds that require maintenance of a lesser degree than improved grounds.

2.2.25. Shrub. A woody plant of relatively low height, distinguished from a tree by usually having several stems rather than a single trunk.

2.2.26. Topsoil. Surface layer soil that is shredded and grade A free from stones, wood and other debris.

2.2.27. Trimming. To cut (something) down to the required size or shape.

2.2.28. Trunk Diameter. The trunk diameter measured 1 foot up from the ground level. This figure shall be used to measure all existing replacement and new trees.

C-3

CONTRACTOR-FURNISHED ITEMS AND

SERVICES

3.1. GENERAL INFORMATION. The contractor shall furnish everything needed to perform this contract according to all its terms. The following mentioned requirements are not all inclusive of the contractor-furnished items and services required in the performance of this contract.

3.1.1. Contractor-Furnished Communications. An operating business telephone shall be maintained at all times. This telephone number shall be given to the Contracting Officer, and

Civil Engineer and Service Call desk at the preperformance conference after the start of the contract.

3.1.2. Debris Removal. All debris and policed items shall be hauled off of EADS Site grounds on an as needed basis and disposed of IAW applicable federal, state and local regulations.

Items shall be transported in tarp covered or closed vehicles. Any materials dropped or blown off vehicles shall be immediately picked-up by the Contractor. All scrap material and debris shall be disposed of as needed at a contractor selected disposal area. The Government shall assume no responsibility in the selection of the above mentioned disposal area.

3.2. CONTRACTOR-FURNISHED VEHICLES. The contractor shall provide and maintain contractor-owned or leased vehicles to meet the requirements of this contract. Any contractor vehicles used in the performance of this contract shall have the company name prominently displayed on both sides of the vehicle and be maintained clean to present a professional appearance.

3.2.1. All vehicles used in the performance of this contract shall be in operable condition and meet the local, state and federal safety requirements. Equipment such as pick-up trucks, which have catalytic converters, shall not be operated on improved or semi-improved grounds, which are covered with dry vegetation. Vehicles found to be unsafe or unable to function as designed shall be removed from the installation and replaced at contractor's expense. Vehicular repairs shall not be done on base. The contracting officer may inspect the contractor's vehicles at any time and direct the removal of any unsafe or non-functional vehicle from the installation.

3.3. CONTRACTOR FURNISHED EQUIPMENT AND TOOLS. The contractor's equipment, including, but not limited to mowers (push, riding and tractor), edger’s, and trimmers, shall be suitable for accomplishing the work specified. All electrical equipment used by the contractor shall meet all safety requirements of this contract and shall be UL approved.

It shall be the responsibility of the contractor to prevent the operation or attempted operation of equipment, or combinations of equipment, which require power exceeding the capacity of existing building circuits. The contractor's equipment shall be in good repair and able to operate efficiently and safely. Equipment shall be maintained clean to present a neat, professional appearance. The contracting officer may inspect the contractor's equipment and/or tools at any time and direct the removal of any unsafe equipment/tools. These items shall be removed from the job by the contractor and replaced with satisfactory equipment.

3.3.1. Materials and Supplies. The following are representative of the materials or supplies the contractor should have to perform the contract.

3.3.1.1. Mowers. Equipment shall be rotary, reel or flail mower of type normally used for grass cutting operations appropriate to each mowing operation. All mowing blades shall be kept properly sharpened.

3.3.1.2. Edger’s/Trimmers. Edgers and trimmers shall be of the mechanical type.

C-4

SPECIFIC

TASKS

4.1. GENERAL INFORMATION. The contractor shall provide all personnel, equipment, tools, supervision, and other items and services necessary to ensure that grounds maintenance is performed at EADS Sites, in a manner that will maintain healthy grass, trees, shrubs and plants and present a clean, neat, and professional appearance. The contractor's work force shall perform all services associated with general ground maintenance duties. The contractor shall take precautions to prevent scalping, uneven mowing, cutting by equipment, and damage to trees, and shrubs. The contractor shall repair damaged turf and replace flowers, shrubs, and trees damaged during mowing operations.

4.2 SECURITY: Contractor shall submit a list of all personnel names and copy of valid driver’s license within one week after award of contract. Any personnel that will work onsite shall be vetted through EADS security. No one will work on site until a background check is completed and personnel cleared. If at any time the contractor submits additional names for clearance, EADS security will require at least 48 hours notice to clear individual.

4.3. MAINTAIN IMPROVED GROUNDS:

4.3.1. Mow Improved Grounds -Buildings 703 & 700 (Approx. 5.8 Acres). Ball Field Parcel (Approx. 5.5 Acres) Grass cutting shall be accomplished on all areas of improved grounds areas as necessary to maintain grass on improved grounds between 2 1/2 inches to 3 inches. Grass clippings shall be mulched on initial mowing. During an extremely hot and dry period, the frequency and height of mowing shall be adjusted so as not to kill or damage lawn areas.

4.3.2. Edging/Trimming:

4.3.2.1. Edging. (Approx. 2500 LF) Sidewalks, driveways, curbs, and other concrete or asphalt edges located in the improved grounds areas shall be mechanically edged every other month. Edging shall include removal of vegetation from cracks in sidewalks, driveways, and curbs within .5 inch of the edged surface and to a depth of 2.0 inches. This work involves all areas of sidewalks, driveways, and curbs in improved grounds areas. Grass and weeds shall be removed and disposed of immediately after edging is performed.

4.3.2.2. Trimming. (Approx. 6000 LF) Grass/weeds shall be trimmed around trees, shrubs, buildings, fences, poles, posts, fire hydrants, parking lot bumper blocks, boulders, and other fixed obstacles. Trimming shall be accomplished as required to match surrounding area. This task involves all improved grounds areas. All mowed areas shall be trimmed concurrent with mowing. This includes all areas inside fence enclosures. Trimming shall be done with a mechanical trimmer.

4.3.3. Remove Debris/Police Grounds. (1 day per week) General litter patrol shall be performed by the contractor in all areas of improved, semi-improved, and parking grounds areas. Contractor's policing responsibilities shall include, but not be limited to, the removal and disposal of all natural debris, (tree limbs, dry brush, rodent habitats, sand, stones, leaves, etc.), and man-made debris. Tree limbs and other debris (i.e., branches, trash, dead animals, etc.) which present obstacles to ground maintenance operations shall be removed. Contractor shall police one (1) day per week.

4.3.3.1. Fall Leaf Pickup. During the month of November, fallen leaves shall be removed semi-monthly (1st & 2nd week) from all improved grounds.. At other times leaves shall be removed as necessary. The contractor shall dispose of all leaves at an off-base location in accordance with existing local, state and federal regulations.

4.4. MAINTAIN SEMI-IMPROVED GROUNDS:

4.4.1. Mow Semi-Improved Grounds (Building 866 Perimeter Road, RADIL Site).

(Approx. 13.5 Acres) Grass cutting shall be accomplished two (2) times per month. Grass shall be cut to 3-4 inches in height. Grass shall not exceed 6 inches in height. Trimming shall match surrounding area.

4.4.2. ACCESS TO WORK AREA. Building 866 RADIL Site is a controlled area.

Contractor will be required to call Job Control at 334-6815, 48 hours in advance to schedule grass cutting. Prior to grass cutting contractor will notify security forces at 334-6825 and inform them that they will be on site working. An escort will be provided when cutting grass inside fenced antennas. ***NOTE*** Building 866 is located on the north side of the flight line. Oneida County Airport Security (TSA) requires all contractors personel that will be onsite to have a security clearance back ground check. It shall be the contractor’s responsibility to apply for and pay for clearances. After award of this contract the contractor will contact Oneida County Airport to apply for clearances. The estimated cost is $100.00 per person. Point of contact is Mr. Ed Arcuri, Oneida County Airport

(315) 736-4171

4.5 SPRING GROUNDS CLEANUP. All improved and semi-improved grounds shall be cleared of all debris prior to the first mowing. All trash, papers, limbs, and other debris shall be removed and disposed of off site by the contractor. Spring cleanup is to include the cleanup and removal of all trash, papers, limbs, sand, leaves, and other debris within all improved and semi-improved grounds areas.

4.6 FALL GROUNDS CLEANUP. All improved and semi-improved grounds shall be cleared of all debris after the last mowing. All trash, papers, limbs, and other debris shall be removed and disposed of off site by the contractor. Fall cleanup is to include the cleanup and removal of all trash, papers, limbs, sand, leaves, and other debris within all improved and semi-improved grounds areas.

5.1 Contractor Manpower Reporting Application (CMRA):

5.1.1 The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the National Guard Bureau via a secure data collection site.

5.1.2 The contractor shall completely fill in all required data fields using the following web address: http://www.ecmra.mil/. Reporting inputs shall be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2013. Contractors may direct questions to the help desk at http://www.ecmra.mil.

TECHNICAL EXHIBIT 1

STANDARD

MAINTAIN IMPROVED GROUNDS

Mowing – To a height of 2½ inches to 3 inches Edging - Every other month (within .5 inch of edged surface, depth of 2 inches) Trimming - Concurrent with mowing to match surrounding area Policing - 1 day per week Fall Leaf Pickup – Semi-monthly (1st & 2nd week) during the month of Nov.

Repair Damaged Areas - As required to match surrounding area

MAINTAIN SEMI-IMPROVED GROUNDS

Mowing – Two (2) times per month 3 – 4 inches. Shall not exceed 6 inches in height.

Trimming - Concurrent with mowing to match surrounding area

SPRINGS GROUNDS CLEANUP

Cleanup – Yearly, prior to first mowing

FALL GROUNDS CLEANUP

Cleanup – Yearly, after last mowing

QUALITY ASSURANCE SURVEILLANCE PLAN

GROUNDS MAINTENANCE SERVICES

INTRODUCTION

This Quality Assurance Surveillance Plan (QASP) has been developed to evaluate contractor actions while implementing this PWS. It is designed to provide an effective surveillance method of monitoring contractor performance for each listed objective in the PWS in the maintenance contract.

The QASP provides a systematic method to evaluate the services the contractor is required to furnish.

This QASP is based on the premise the Government desires to maintain a quality standard in operating, maintaining, and repairing facilities and that a service contract to provide the service is the best means of achieving that objective.

The contractor, and not the Government, is responsible for management and quality control actions to meet the terms of the contract. The role of the Government is quality assurance to ensure contract standards are achieved.

In this contract the quality control program is the driver for product quality. The contractor is required to develop a comprehensive program of inspections and monitoring actions. The first major step to ensuring a “self-correcting” contract is to ensure that the quality control program approved at the beginning of the contract provides the measures needed to lead the contractor to success.

Once the quality control program is approved, careful application of the process and standards presented in the remainder of this document will ensure a robust quality assurance program.

Performance Objective

SOW

Para

Performance Standard AQL Surveillance Method

Maintain Improved and Semi- Improved Grounds

4.3 and 4.4

Grass is maintained within proper height for its area.

COR will inspect after completion

Customer complaint

100% inspection

Edging 4.3.2.1 Edging is completed along sidewalks, drives & curbs to within a ½ inch of edge surface and to a depth of 2 inches.

COR will inspect after completion

Customer complaint

100% inspection

Trimming 4.3.2.2 Trimming is completed around all obstructions, fences, trees, curbing & guard rail

COR will inspect after completion

Customer complaint

100% inspection

Remove debris/police grounds

4.3.3 Areas free of debris and

litter

COR will inspect after completion

Customer complaint

100% inspection

SURVEILLANCE: The Government Contracting Officers Representative (COR) person will receive complaints from base personnel and pass them to the contractor's quality control inspector (QCI) for correction.

STANDARD: Customer complaints shall not exceed the thresholds cited above for each performance standard. The COR shall notify the Contracting Officer for appropriate action in accordance with FAR 52.212.4, Contract Terms and Conditions-Commercial Items (May 1997) or the appropriate Inspection of Services clause, if any of the above service areas exceed the customer complaint thresholds.

PROCEDURES: Any base employee that observes unacceptable services, either incomplete or not performed, for any of the above performance objectives should immediately contact the COR and the COR will complete appropriate documentation to record the complaint. The COR will consider the customer complaint valid upon receipt from the customer. The COR should inform the customer of the approximate time the unacceptable performance will be corrected and advise the customer to contact the COR if not corrected. The COR will consider customer complaints as resolved unless notified otherwise by the customer. The COR shall verbally notify the Contractor’s Quality Control Inspector (QCI) to pick up the written customer complaint. The

QCI will be given two hours after verbal notification to correct the unacceptable performance. If the QCI disagrees with the complaint after investigation of the site and challenges the validity of the complaint, the QCI will notify the COR. The COR will conduct an investigation to determine the validity of the complaint. If the COR determines the complaint as invalid, he will document the written complaint of the findings and notify the customer. The COR will retain the annotated copy of the written complaint for his/her files. If after investigation the COR determines the complaint as valid, the COR will inform the QCI and the QCI will be given an additional hour to correct the customer complaint. A customer complaint will not be recorded if proper and timely correction of the unacceptable condition(s) is accomplished. The QCI shall return the written customer complaint document, properly completed with actions taken, to the COR, who will file the complaint for monitoring future recurring performance. Recurring customer complaints are not permitted for any of the above service items. If a repeat customer complaint is received indicating the same deficiency during the service period (month, quarter, etc.), the COR should contact the Contracting Officer for appropriate action.

WAGE DETERMINATION

WD 05-2383 (Rev.-18) was first posted on www.wdol.gov on 01/05/2016

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2383 Daniel W. Simms Division of | Revision No.: 18 Director Wage Determinations| Date Of Revision: 12/29/2015 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: New York

Area: New York Counties of Broome, Cayuga, Chemung, Chenango, Cortland, Hamilton, Herkimer, Madison, Oneida, Onondaga, Oswego, Otsego, Tioga, Tompkins **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 12.91 01012 - Accounting Clerk II 14.49 01013 - Accounting Clerk III 17.66 01020 - Administrative Assistant 19.48

01040 - Court Reporter 18.96 01051 - Data Entry Operator I 11.55 01052 - Data Entry Operator II 12.77 01060 - Dispatcher, Motor Vehicle 15.33 01070 - Document Preparation Clerk 12.14 01090 - Duplicating Machine Operator 12.14 01111 - General Clerk I 11.53 01112 - General Clerk II 12.58 01113 - General Clerk III 14.12 01120 - Housing Referral Assistant 18.00 01141 - Messenger Courier 10.65 01191 - Order Clerk I 11.93 01192 - Order Clerk II 13.02 01261 - Personnel Assistant (Employment) I 13.96 01262 - Personnel Assistant (Employment) II 15.62 01263 - Personnel Assistant (Employment) III 17.25 01270 - Production Control Clerk 18.77 01280 - Receptionist 11.29 01290 - Rental Clerk 12.13 01300 - Scheduler, Maintenance 13.63 01311 - Secretary I 13.63 01312 - Secretary II 15.67 01313 - Secretary III 17.45 01320 - Service Order Dispatcher 12.29 01410 - Supply Technician 19.48 01420 - Survey Worker 14.47 01531 - Travel Clerk I 11.19 01532 - Travel Clerk II 12.07 01533 - Travel Clerk III 12.96 01611 - Word Processor I 12.29 01612 - Word Processor II 13.80 01613 - Word Processor III 15.43 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 23.28 05010 - Automotive Electrician 18.24 05040 - Automotive Glass Installer 17.63 05070 - Automotive Worker 17.63 05110 - Mobile Equipment Servicer 16.32 05130 - Motor Equipment Metal Mechanic 18.96 05160 - Motor Equipment Metal Worker 17.63 05190 - Motor Vehicle Mechanic 17.25 05220 - Motor Vehicle Mechanic Helper 15.63 05250 - Motor Vehicle Upholstery Worker 16.95 05280 - Motor Vehicle Wrecker 17.63 05310 - Painter, Automotive 18.24 05340 - Radiator Repair Specialist 17.63 05370 - Tire Repairer 14.34 05400 - Transmission Repair Specialist 18.96 07000 - Food Preparation And Service Occupations 07010 - Baker 11.05 07041 - Cook I 10.78 07042 - Cook II 12.06 07070 - Dishwasher 8.91 07130 - Food Service Worker 9.34 07210 - Meat Cutter 16.17

07260 - Waiter/Waitress 9.99 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 18.28 09040 - Furniture Handler 13.59 09080 - Furniture Refinisher 18.28 09090 - Furniture Refinisher Helper 15.63 09110 - Furniture Repairer, Minor 16.95 09130 - Upholsterer 20.09 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 10.11 11060 - Elevator Operator 10.11 11090 - Gardener 14.37 11122 - Housekeeping Aide 11.12 11150 - Janitor 11.12 11210 - Laborer, Grounds Maintenance 12.34 11240 - Maid or Houseman 9.99 11260 - Pruner 17.78 11270 - Tractor Operator 14.53 11330 - Trail Maintenance Worker 12.34 11360 - Window Cleaner 12.77 12000 - Health Occupations 12010 - Ambulance Driver 15.13 12011 - Breath Alcohol Technician 14.88 12012 - Certified Occupational Therapist Assistant 17.45 12015 - Certified Physical Therapist Assistant 17.79 12020 - Dental Assistant 15.13 12025 - Dental Hygienist 26.52 12030 - EKG Technician 24.38 12035 - Electroneurodiagnostic Technologist 24.38 12040 - Emergency Medical Technician 15.13 12071 - Licensed Practical Nurse I 13.30 12072 - Licensed Practical Nurse II 14.88 12073 - Licensed Practical Nurse III 16.60 12100 - Medical Assistant 12.44 12130 - Medical Laboratory Technician 18.73 12160 - Medical Record Clerk 13.27 12190 - Medical Record Technician 14.85 12195 - Medical Transcriptionist 15.34 12210 - Nuclear Medicine Technologist 31.04 12221 - Nursing Assistant I 9.40 12222 - Nursing Assistant II 10.57 12223 - Nursing Assistant III 11.54 12224 - Nursing Assistant IV 12.95 12235 - Optical Dispenser 20.61 12236 - Optical Technician 14.38 12250 - Pharmacy Technician 13.77 12280 - Phlebotomist 12.95 12305 - Radiologic Technologist 25.19 12311 - Registered Nurse I 21.73 12312 - Registered Nurse II 26.58 12313 - Registered Nurse II, Specialist 26.58 12314 - Registered Nurse III 32.15 12315 - Registered Nurse III, Anesthetist 32.15 12316 - Registered Nurse IV 38.54 12317 - Scheduler (Drug and Alcohol Testing) 18.44

13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.42 13012 - Exhibits Specialist II 22.83 13013 - Exhibits Specialist III 27.93 13041 - Illustrator I 18.42 13042 - Illustrator II 22.83 13043 - Illustrator III 27.93 13047 - Librarian 25.28 13050 - Library Aide/Clerk 10.80 13054 - Library Information Technology Systems 22.83 Administrator 13058 - Library Technician 12.68 13061 - Media Specialist I 16.47 13062 - Media Specialist II 18.42 13063 - Media Specialist III 20.55 13071 - Photographer I 15.46 13072 - Photographer II 17.29 13073 - Photographer III 21.43 13074 - Photographer IV 26.21 13075 - Photographer V 31.71 13110 - Video Teleconference Technician 17.17 14000 - Information Technology Occupations 14041 - Computer Operator I 14.77 14042 - Computer Operator II 16.52 14043 - Computer Operator III 18.43 14044 - Computer Operator IV 23.63 14045 - Computer Operator V (see 1) 14071 - Computer Programmer I 20.57 14072 - Computer Programmer II 24.53 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 14.77 14160 - Personal Computer Support Technician 24.05 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 27.87 15020 - Aircrew Training Devices Instructor (Rated) 34.05 15030 - Air Crew Training Devices Instructor (Pilot) 40.44 15050 - Computer Based Training Specialist / Instructor 27.87 15060 - Educational Technologist 27.22 15070 - Flight Instructor (Pilot) 40.44 15080 - Graphic Artist 22.64 15090 - Technical Instructor 19.66 15095 - Technical Instructor/Course Developer 24.06 15110 - Test Proctor 15.87 15120 - Tutor 15.87 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 8.54 16030 - Counter Attendant 8.54 16040 - Dry Cleaner 9.91 16070 - Finisher, Flatwork, Machine 8.63 16090 - Presser, Hand 8.63 16110 - Presser, Machine, Drycleaning 8.63

16130 - Presser, Machine, Shirts 8.63 16160 - Presser, Machine, Wearing Apparel, Laundry 8.63 16190 - Sewing Machine Operator 10.50 16220 - Tailor 11.09 16250 - Washer, Machine 8.96 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 20.84 19040 - Tool And Die Maker 21.55 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 14.75 21030 - Material Coordinator 18.77 21040 - Material Expediter 18.77 21050 - Material Handling Laborer 13.66 21071 - Order Filler 10.41 21080 - Production Line Worker (Food Processing) 14.75 21110 - Shipping Packer 13.30 21130 - Shipping/Receiving Clerk 13.30 21140 - Store Worker I 13.30 21150 - Stock Clerk 17.62 21210 - Tools And Parts Attendant 14.75 21410 - Warehouse Specialist 14.75 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 25.82 23021 - Aircraft Mechanic I 24.88 23022 - Aircraft Mechanic II 25.82 23023 - Aircraft Mechanic III 26.88 23040 - Aircraft Mechanic Helper 19.11 23050 - Aircraft, Painter 22.56 23060 - Aircraft Servicer 21.64 23080 - Aircraft Worker 22.46 23110 - Appliance Mechanic 18.24 23120 - Bicycle Repairer 14.34 23125 - Cable Splicer 29.40 23130 - Carpenter, Maintenance 19.98 23140 - Carpet Layer 19.67 23160 - Electrician, Maintenance 23.73 23181 - Electronics Technician Maintenance I 21.84 23182 - Electronics Technician Maintenance II 23.49 23183 - Electronics Technician Maintenance III 24.58 23260 - Fabric Worker 18.65 23290 - Fire Alarm System Mechanic 20.85 23310 - Fire Extinguisher Repairer 17.73 23311 - Fuel Distribution System Mechanic 28.12 23312 - Fuel Distribution System Operator 23.24 23370 - General Maintenance Worker 16.05 23380 - Ground Support Equipment Mechanic 24.88 23381 - Ground Support Equipment Servicer 20.62 23382 - Ground Support Equipment Worker 21.69 23391 - Gunsmith I 17.73 23392 - Gunsmith II 19.83 23393 - Gunsmith III 21.23 23410 - Heating, Ventilation And Air-Conditioning 19.43 Mechanic 23411 - Heating, Ventilation And Air Contditioning 20.16 Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 19.24 23440 - Heavy Equipment Operator 24.79 23460 - Instrument Mechanic 21.23 23465 - Laboratory/Shelter Mechanic 20.57 23470 - Laborer 11.58 23510 - Locksmith 20.37 23530 - Machinery Maintenance Mechanic 20.06 23550 - Machinist, Maintenance 17.18 23580 - Maintenance Trades Helper 15.63 23591 - Metrology Technician I 21.23 23592 - Metrology Technician II 22.08 23593 - Metrology Technician III 22.84 23640 - Millwright 20.70 23710 - Office Appliance Repairer 20.09 23760 - Painter, Maintenance 18.10 23790 - Pipefitter, Maintenance 27.88 23810 - Plumber, Maintenance 21.26 23820 - Pneudraulic Systems Mechanic 21.23 23850 - Rigger 21.23 23870 - Scale Mechanic 20.82 23890 - Sheet-Metal Worker, Maintenance 20.85 23910 - Small Engine Mechanic 19.26 23931 - Telecommunications Mechanic I 25.96 23932 - Telecommunications Mechanic II 26.86 23950 - Telephone Lineman 25.89 23960 - Welder, Combination, Maintenance 18.96 23965 - Well Driller 21.23 23970 - Woodcraft Worker 21.23 23980 - Woodworker 16.32 24000 - Personal Needs Occupations 24570 - Child Care Attendant 9.84 24580 - Child Care Center Clerk 12.27 24610 - Chore Aide 9.75 24620 - Family Readiness And Support Services 14.52 Coordinator 24630 - Homemaker 13.64 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 24.39 25040 - Sewage Plant Operator 18.54 25070 - Stationary Engineer 24.39 25190 - Ventilation Equipment Tender 18.72 25210 - Water Treatment Plant Operator 18.28 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.51 27007 - Baggage Inspector 13.35 27008 - Corrections Officer 21.94 27010 - Court Security Officer 21.74 27030 - Detection Dog Handler 16.29 27040 - Detention Officer 21.94 27070 - Firefighter 23.44 27101 - Guard I 13.35 27102 - Guard II 16.29 27131 - Police Officer I 22.40 27132 - Police Officer II 24.88 28000 - Recreation Occupations

28041 - Carnival Equipment Operator 11.05 28042 - Carnival Equipment Repairer 11.40 28043 - Carnival Equpment Worker 8.99 28210 - Gate Attendant/Gate Tender 13.80 28310 - Lifeguard 11.01 28350 - Park Attendant (Aide) 15.44 28510 - Recreation Aide/Health Facility Attendant 11.27 28515 - Recreation Specialist 19.13 28630 - Sports Official 12.29 28690 - Swimming Pool Operator 18.62 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.08 29020 - Hatch Tender 24.08 29030 - Line Handler 24.08 29041 - Stevedore I 21.05 29042 - Stevedore II 24.98 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 15.31 30022 - Archeological Technician II 17.07 30023 - Archeological Technician III 21.22 30030 - Cartographic Technician 23.74 30040 - Civil Engineering Technician 21.56 30061 - Drafter/CAD Operator I 16.43 30062 - Drafter/CAD Operator II 19.13 30063 - Drafter/CAD Operator III 21.29 30064 - Drafter/CAD Operator IV 25.23 30081 - Engineering Technician I 14.27 30082 - Engineering Technician II 16.02 30083 - Engineering Technician III 18.70 30084 - Engineering Technician IV 22.20 30085 - Engineering Technician V 27.16 30086 - Engineering Technician VI 32.86 30090 - Environmental Technician 19.67 30210 - Laboratory Technician 18.00 30240 - Mathematical Technician 23.49 30361 - Paralegal/Legal Assistant I 17.28 30362 - Paralegal/Legal Assistant II 21.92 30363 - Paralegal/Legal Assistant III 26.81 30364 - Paralegal/Legal Assistant IV 32.44 30390 - Photo-Optics Technician 23.49 30461 - Technical Writer I 21.13 30462 - Technical Writer II 25.85 30463 - Technical Writer III 31.27 30491 - Unexploded Ordnance (UXO) Technician I 22.74 30492 - Unexploded Ordnance (UXO) Technician II 27.51 30493 - Unexploded Ordnance (UXO) Technician III 32.97 30494 - Unexploded (UXO) Safety Escort 22.74 30495 - Unexploded (UXO) Sweep Personnel 22.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 21.29 Surface Programs 30621 - Weather Observer, Senior (see 2) 22.77 31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 10.64 31030 - Bus Driver 14.20 31043 - Driver Courier 12.21 31260 - Parking and Lot Attendant 9.46 31290 - Shuttle Bus Driver 13.14 31310 - Taxi Driver 10.00 31361 - Truckdriver, Light 13.14 31362 - Truckdriver, Medium 17.61 31363 - Truckdriver, Heavy 17.68 31364 - Truckdriver, Tractor-Trailer 17.68 99000 - Miscellaneous Occupations 99030 - Cashier 9.10 99050 - Desk Clerk 10.17 99095 - Embalmer 26.64 99251 - Laboratory Animal Caretaker I 10.66 99252 - Laboratory Animal Caretaker II 11.47 99310 - Mortician 27.29 99410 - Pest Controller 15.84 99510 - Photofinishing Worker 11.97 99710 - Recycling Laborer 14.91 99711 - Recycling Specialist 17.56 99730 - Refuse Collector 13.58 99810 - Sales Clerk 11.34 99820 - School Crossing Guard 9.90 99830 - Survey Party Chief 20.03 99831 - Surveying Aide 12.59 99832 - Surveying Technician 17.23 99840 - Vending Machine Attendant 14.59 99841 - Vending Machine Repairer 16.15 99842 - Vending Machine Repairer Helper 14.59

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, 4 weeks after 15 years, and 5 weeks after 25 years.

Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees.