A21 - W912PM20T0004 AMD 1_Combined.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice.

This is a combined synopsis/solicitation. THIS ANNOUNCEMENT CONSTITUTES THE ONLY

SOLICITATION; QUOTES ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL

NOT BE ISSUED. This will be a 100% set-aside for Small Business procurement. The solicitation number is W912PM20T0004 and the solicitation is issued as a Request for Quote (RFQ). The NAICS code is 541360 with a small business size standard of $16.5M. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2020-01.

Description of Requirement: The Contractor shall furnish all services, labor, equipment, supplies, tools and incidentals necessary to perform vibracore sampling, development of drilling logs, laboratory testing of soils, and other services as specified herein. A total of 175 vibracore borings are to be drilled within a 25 mi2 area offshore of Wrightsville Beach, NC, in Onslow Bay (Figure 1). The borings shall be drilled in two phases, as described below in “Statement of Services”. Within the investigation area, the ocean floor elevation ranges from about -33 ft. to -50 ft. MLLW within this area. Vibracore locations denoted within this Scope of Work (SOW) were selected from the analysis of 1993, 1998 and 2008 coring data, as well as historical State and Federal geophysical surveys. Results from drilling performed under this SOW will be evaluated by the Wilmington District of the U.S. Army Corps of Engineers (USACE) to assess in-situ borrow material occurrence, as well as the volume, quality, and suitability for beach fill placement.

Evaluation and Award: The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Award shall be made to the lowest priced technically acceptable offer. See solicitation provison 5.212-2.

Each offeror must submit both a Price Quote and a Technical Proposal via the Federal Business Opportunities (FBO) website EMAIL to karri.l.mares@usace.army.mil AND Rosalind.m.shoemaker@usace.army.mil. No hard paper copies will be accepted or evaluated. Both the Price Quote and the Technical Proposal must be received by the closing date and time set for receipt of quotes. In an effort to reduce paperwork and reduce cost, all quotes shall be submitted electronically. All submissions shall be in Adobe PDF format and shall be on 8 ½ x 11 size pages in no less than a 10 pitch or 10 font. Offerors may use compressions utility software such as WinZip or PKZip to reduce file size and facilitate transmission.

Title the file(s) in the following format:

W912PM20T0004_ COMPANY NAME_PRICING

W912PM20T0004_COMPANY NAME_TECHNICAL

Offerors shall submit the quotes electronically via FBO.gov EMAIL to karri.l.mares@usace.army.mil AND Rosalind.m.shoemaker@usace.army.mil. You must be logged in to be able to submit/review electronic responses. The user guide is located at https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf.

Quote due Date and Time:

Request For Quotes No: W912PM20T0004 Due Date of Quotes: 19 November 2019 Time by which Quotes are due: 2:00 P.M. (Eastern Time) Title of Project: Wrightsville Beach Vibracore Services mailto:karri.l.mares@usace.army.mil mailto:Rosalind.m.shoemaker@usace.army.mil mailto:karri.l.mares@usace.army.mil mailto:Rosalind.m.shoemaker@usace.army.mil https://www.fbo.gov/downloads/FBO_Vendor_Guide.pdf

Quotes are due as specified on the solicitation document (as amended if applicable). The time & date of Quote receipt will be the upload completion / delivery time & date recorded within FBO the email submission as received by the individuals listed above. Do not assume that electronic communication is instantaneous. Offerors should time their upload effort with prudence by not waiting until the last few minutes—this will allow for unexpected delays in the transmittal process. If an electronic submission is uploaded minutes before the deadline but the upload or transmission doesn’t complete until after the deadline, the submission will be considered late. Offerors are encouraged to keep a copy of the email “sent” and “receipt” verification upload confirmation for their record.

W912PM20T0004

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Phase 1 - Vibracore Services - Wrightsville Beach (35%)

The first 60 vibracores In accordance with the attached Statement of Work.

FOB: Destination

NET AMT

0002 1 Job Phase 2 - Vibracore Services - Wrightsville Beach (65%)

The second 60 vibracores in accordance with the attached Statement of Work.

0003 1 Job Phase 3 - Vibracore Services - Wrightsville Beach (100%)

The remaining 55 vibracores and final report in accordance with the attached

Statement of Work.

Section C - Descriptions and Specifications

SCOPE OF WORK

SCOPE OF WORK

Subsurface Investigation and Geotechnical Laboratory Testing, Wrightsville Beach, New Hanover County, NC

October 17, 2019

I. GENERAL REQUIREMENTS

1. General. The Contractor shall furnish all services, labor, equipment, supplies, tools and incidentals necessary to perform vibracore sampling, development of drilling logs, laboratory testing of soils, and other services as specified herein. A total of 175 vibracore borings are to be drilled within a 25 mi2 area offshore of Wrightsville Beach, NC, in Onslow Bay (Figure 1). The borings shall be drilled in two phases, as described below in “Statement of Services”.

Within the investigation area, the ocean floor elevation ranges from about -33 ft. to -50 ft. MLLW within this area.

Vibracore locations denoted within this Scope of Work (SOW) were selected from the analysis of 1993, 1998 and 2008 coring data, as well as historical State and Federal geophysical surveys. Results from drilling performed under this SOW will be evaluated by the Wilmington District of the U.S. Army Corps of Engineers (USACE) to assess in-situ borrow material occurrence, as well as the volume, quality, and suitability for beach fill placement.

2. Responsibility. The Contractor shall furnish qualified personnel to ensure the accomplishment of work specified in this SOW. Additionally, the Contractor shall furnish all services, equipment, personnel, and travel required in connection with this SOW. The Contractor is responsible for maintaining the submittal timeline outlined in Table 1.

3. Direction. The Contractor shall accept directions only from the Wilmington District Contracting Officer (KO), Ms. Rosalind Shoemaker (910-251-4436) or her designee. Requests or desires of the Users, Using Agency, or any other party made directly to the Contractor shall be immediately brought to the attention of the KO for this Contract. Any changes to this SOW must be authorized in writing by the KO.

4. Request for Payment.

The Contractor shall provide a copy of the invoice on completion of agreed services. The invoice shall be provided through the US Postal Service or email, to the Technical Point of Contact or the Contracting Officer’s Representative (POC/COR) named below. The contractor shall ensure that the following are included on the invoice:

Contract #

Invoice #

Company Name

Invoiced Line Item(s) must match the Contract Line Item(s)

Small Business, Veteran Owned, or 8A – If applicable, indicate on invoice

5. Coordination. The COR is Mr. Mitchell H. Hall, P.G. (910-251-4742), and he shall be the Contractor’s point of contact (POC) for all submittals and timeline execution (see Paragraph 9, Submittals Timeline). The Wilmington District technical POCs for this task order is Mr. Stephen Fabian (910-251-4029) and Mrs. Lisa Bishop (910-251- 4879). In his or her absence, contact shall be maintained with Mr. Hall, when addressing technical matters. The Contractor shall designate a project manager who shall be the principal point of contact for the Wilmington District in administering this contract. The Contractor's project manager shall be responsible for all coordination to ensure the work is accomplished in a professional manner. Any directions given that are viewed by the Contractor as a change to the SOW affecting contract fee and time shall be brought to the immediate attention of the KO or the

COR.

COR and technical POCs mailing and email information follows:

Mitchell H. Hall, PG, PMP

(Mitch.H.Hall@usace.army.mil)

U.S. Army Corps of Engineers Wilmington District Attn: Mitchell H. Hall 69 Darlington Avenue Wilmington, NC 28403-1343

Stephen J. Fabian (Stephen.J.Fabian@usace.army.mil) U.S. Army Corps of Engineers Wilmington District Attn: Stephen Fabian 69 Darlington Avenue Wilmington, NC 28403-1343

Lisa Bishop (Lisa.Bishop@usace.army.mil) U.S. Army Corps of Engineers Wilmington District Attn: Lisa Bishop 69 Darlington Avenue Wilmington, NC 28403-1343

II. STATEMENT OF SERVICES

1. Description of Work. The Contractor shall perform a total of 175 vibracore borings for this project to be drilled in two phases. Phase 1 shall begin immediately upon receipt of the Contractor’s Notice to Proceed (NTP). The Contractor shall mobilize to the site within five (5) business days of the NTP and execute the drilling of a pre-designated array of 54 borings to a termination depth of 10 feet below ocean floor and 6 borings to a termination depth of 20 feet below ocean floor. The location and coordinates of the Phase 1 borings are shown on Figure 1 and Table 1. The Contractor shall prioritize his vibracore drilling operations in the order shown on Figure 1 (Priority 1- 3). Phase 1 will conclude upon the completion of these borings. Phase 1 preliminary drilling logs (WBO-19-V-01 through WBO-19-V-60) shall be submitted to USACE within 30 calendar days of the NTP. Phase 2 will be initiated within 5-business days of the completion of Phase 1. The Contractor shall execute drilling the remaining one-hundred and five (115) borings (Coordinates TBD) during Phase 2. These borings shall be pre-located by USACE, based upon the initial drilling logs from the Phase 1 drilling, and they shall be drilled to a termination depth of 10 feet below ocean floor. Reprioritization of the Phase 2 vibracores may intermingle with the collection of Phase 1. If Phase 1 vibracores indicate beach compatible sands in a given area vibracores that were designated during Phase 2 may pre-maturely be used before Phase 1 is complete. The location of Phase 1 vibracores will remain unchanged.

Throughout drilling execution, the Contractor shall provide USACE field results and preliminary drilling logs to allow USACE to develop vibracore targets for Phase 2, and to assign lab testing intervals. The Contractor shall thoroughly communicate field findings from each vibracore boring to USACE within ten (10) calendar days of borehole completion, which includes preliminary drilling logs and all field documentation. All borings shall be horizontally referenced to North American Datum (NAD) 1983 State Plane North Carolina Survey Feet. The top and bottom of each boring shall be referenced to the NAVD88 vertical datum. Sampling procedures for all borings shall be accomplished in accordance with the paragraph “Vibracore Sampling.” Preliminary and Final Drilling Logs for all borings shall be accomplished in accordance with the paragraph “Drilling Logs.” In addition to Preliminary and Final Drilling Logs, the Contractor shall take detailed photographs of the cores that highlight changes in lithology.

Laboratory testing on USACE-designated samples shall be accomplished in accordance with the paragraph “Laboratory Testing Procedures.”

2. Purpose. Vibracore drilling, sampling, and laboratory testing are necessary to verify the quality and quantity of material remaining within the offshore borrow area, which will be used for the Wrightsville Beach Coastal Storm Risk Management Project.

3. USACE Furnished Materials. A map showing the Phase 1 vibracore boring locations is provided in Figure 1.

Boring coordinates for Phase 1 borings is provided in Table 1. The Phase 2 boring locations will be developed by USACE, and the majority of them will be communicated to the Contractor prior to completion of the Phase 1 drilling. A gINT database, which includes the SAW Form 1836-A (Vibracore Boring) that shall be used to generate the drilling logs, will be furnished after contract award. GIS files of existing borings, NOAA charts, project bathymetry, and historical data (if available) shall also be provided. Designated sampling intervals for laboratory testing shall be provided by Wilmington District, based on the Contractor’s Preliminary Drilling Logs.

mailto:Stephen.J.Fabian@usace.army.mil mailto:Lisa.Bishop@usace.army.mil

4. Vibracore Sampling. Vibracore borings shall be performed within 20 feet of the locations provided by the Wilmington District (Table 1). Vibracore drilling shall be accomplished by vibrating a sampling tube to the maximum target depths below the ocean floor or to refusal. Penetrometer data collection shall be recorded and presented to verify vibracore refusal. Vibracore refusal is defined as the sampling barrel having a penetration rate of less than 0.2 feet over a 2-minute period. If vibracore refusal is encountered at the sea bed, the Contractor shall offset up to 20 feet and conduct at least two additional vibracore attempts. Each location where refusal is encountered shall be recorded. For each drilled vibracore location, real-time kinematic (RTK) Global Positioning System (GPS) surveying techniques shall be utilized to provide accuracies of 0.2 feet both vertically and horizontally. Completed vibracores shall be carefully transported to the Contractor’s designated facility for processing, field logging, and visual soils classification. A photographic mosaic log depicting the stratigraphic horizons relative to depth shall be produced for each core. Vibracores shall be field classified and logged in accordance with ASTM D2488 “Standard Practice for Description and Identification of Soils (Visual-Manual Procedure).” The top and bottom of the vibracores and core photos shall be referenced to NAVD88 vertical datum. Once field classification of the core lithology is complete, the Preliminary Drilling Logs, core photographs, and penetrometer records shall be submitted to the Wilmington District to select samples for laboratory testing and to select vibracore targets for the Phase 2 investigation. Borings will be designated as the following “WBO-19- V-#”.

5. Drilling Logs. All drilling logs shall be developed using SAW Form 1836-A (Vibracore Boring), dated June 2016.

Preliminary Drilling Logs, at a minimum, shall include the date and time each boring was taken, run time for the boring, the horizontal location of the boring (NAD 1983 State Plane NC FIPS 3200 Feet), tide-corrected ocean bottom elevation (NAVD88), and a visual description of the stratigraphy and the lithology in accordance with ASTM 2488-09A. Supplemental information including depths for the entire length of recovered material, boring recovery, and refusal depth shall also be denoted. The Wilmington District shall determine the sample intervals to be tested from the Preliminary Drilling Logs, in comparison with core photos and penetrometer data. Samples sent for lab testing shall be designated “S-1, S-2, S-3, etc…” on the drilling logs under “column f” on SAW Form 1836-A, with top and bottom depths listed. Wilmington District review and comment period for the Preliminary and Final Drilling Logs shall be in accordance with the submittal timeline provided in Table 2.

6. Laboratory Testing Procedures. Laboratory testing shall be the responsibility of the Contractor. Laboratory tests shall be conducted by a USACE validated soils testing lab, or a North Carolina Department of Transportation soils testing lab. A listing of USACE validated laboratories is available at: http://www.erdc.usace.army.mil/Media/Fact- Sheets/Fact-Sheet-Article-View/Article/476661/materials-testing-center/. For estimating purposes, 4 samples are proposed to be collected from each 10-ft. core and 6 samples are proposed to be collected from each 20-ft core.

The maximum number of samples for which laboratory testing is required shall not exceed 452 712 samples. The Wilmington District shall determine the depth intervals for each test sample based on the Preliminary Drilling Logs.

Draft lab test results shall be submitted to the COR or technical POCs in accordance with the submittal timeline provided in Table 2. The final laboratory test results shall be included in the Final Report and on the Final Drilling Logs. The laboratory test reports shall include the project name, laboratory name, boring number, sample identification number and date the sample was tested.

Three (3) test procedures shall be performed on each sample:

1) ASTM D6913, “Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis”. The following sieve sizes shall be used: 3/4-in., 3/8-in., No. 4, No. 7, No. 10, No. 14, No. 18, No. 25, No. 35, No. 45, No. 60, No.

80, No. 120, No. 170, No. 200, and No. 230;

2) ASTM D2487 “Standard Practice for Classification of Soils for Engineering Purposes (Unified Soils Classification System);” and

3) Visual, volumetric percentage of shell and rock fragment determination. Visual percent shell content and visual percent rock fragment content shall be estimated for the 3/4-in., 3/8-in., and No. 4 sieve sizes.

7. Cost Proposal. The Contractor shall submit a sampling plan to USACE as part of his or her proposal. The sampling plan shall include the type of vibracore machine, the size of the vibracore tube, the material from which http://www.erdc.usace.army.mil/Media/Fact-Sheets/Fact-Sheet-Article-View/Article/476661/materials-testing-center/ http://www.erdc.usace.army.mil/Media/Fact-Sheets/Fact-Sheet-Article-View/Article/476661/materials-testing-center/ the tubes are made, the size and description of the vessel(s) to be used, the number of boat and drill crew members, the qualifications of the laboratory performing analyses, and a description of the survey equipment to be used to collect coordinate and elevation data. For the cost proposal, the Contractor shall assume; 175 total vibracore borings, to be drilled in two phases; 712 soil gradation tests, 712 soil classifications, 712 visual determinations of shell and rock fragment content for the no.4, 3/8 in., and ¾ in. sieves, 175 Preliminary Drilling Logs in gINT format, 175 photographic mosaic logs, a gINT database, an Excel summary spreadsheet of all laboratory data, and a Final Report including Final Drilling Logs and laboratory analyses. The estimate shall include daily costs for vessel operation and number of days required for the vibracore drilling effort.

8. Reporting Requirements. Phase 1 preliminary drilling logs (WBO-19-V-01 through WB-19-V-60) shall be submitted to USACE within 30 calendar days of the NTP. The Contractor shall furnish preliminary drilling logs with data updates and a Final Report to the Wilmington District. The Contractor shall provide USACE field results and preliminary drilling logs to allow USACE to select samples for lab testing and to develop new targets for the Phase 2 vibracore borings. In order to effectively target the Phase 2 borings and assign lab testing intervals, the Contractor shall thoroughly communicate field findings from each vibracore boring to USACE within ten (10) calendar days of borehole completion, which includes preliminary drilling logs and all field documentation. The core photographic mosaics, penetrometer data and preliminary drilling logs shall be submitted at the same time to allow USACE to select samples for testing. USACE review and feedback of Contractor submittals shall be in accordance with the submittal timeline shown in Table 2. A Draft Final Report shall be submitted to USACE for review and final comment. The Final Report shall include a description of the work, a map with the final vibracore boring locations, Final Drilling Logs for Phases 1 and 2, penetrometer records, core photographic mosaics, and lab test data, complete with gradation tables and curves for each sample tested and a summary table. In addition to the hard copy of the Final Report, the Contractor shall furnish electronic/digital files containing all the lab test data in Excel and PDF formats, the gINT project database file, and ArcGIS shapefiles, layers, or feature classes showing vibracoring locations. Electronic/digital lab test data files shall contain the project name at the top, boring number, sample identification number, depth of sample, visual classification, and percentage passing each sieve (highlight #200 sieve), visual percent of rock and shell content, and the mean and median grain size for each sample.

9. Target Coordinates. The following are the coordinates for the Phase 1 vibracores, referenced to NAD1983 NC State Plane Survey Feet. A shapefile is available on request.

Table 1. Wrightsville Beach Offshore Phase 1 Vibracore Target Coordinates

Boring ID Easting Northing Penetration Boring ID Easting Northing Penetration

WBO-19-V-01 2362752.2 158102.5 10 ft WBO-19-V-34 2373487.8 147729.1 10 ft

WBO-19-V-02 2363797.5 159178.6 10 ft WBO-19-V-35 2374446.2 150298.0 10 ft

WBO-19-V-03 2364880.7 160253.8 10 ft WBO-19-V-36 2382515.6 155137.9 20 ft

WBO-19-V-04 2365879.7 161316.8 10 ft WBO-19-V-37 2381414.4 148801.0 10 ft

WBO-19-V-05 2366927.2 162384.9 10 ft WBO-19-V-38 2387486.1 145548.5 10 ft

WBO-19-V-06 2370160.4 168165.7 10 ft WBO-19-V-39 2383564.0 154740.7 20 ft

WBO-19-V-07 2371368.7 170911.7 10 ft WBO-19-V-40 2393390.7 161508.1 10 ft

WBO-19-V-08 2372618.7 173672.1 10 ft WBO-19-V-41 2382938.7 150412.7 10 ft

WBO-19-V-09 2362769.4 153864.4 10 ft WBO-19-V-42 2383571.5 151491.4 10 ft

WBO-19-V-10 2373868.7 176484.6 10 ft WBO-19-V-43 2384226.1 152608.7 20 ft

WBO-19-V-11 2364899.5 156012.4 10 ft WBO-19-V-44 2384911.1 154119.3 20 ft

WBO-19-V-12 2367010.3 158162.1 10 ft WBO-19-V-45 2385827.7 155301.3 20 ft

WBO-19-V-13 2369096.8 160306.7 10 ft WBO-19-V-46 2385177.8 157439.3 20 ft

WBO-19-V-14 2374406.8 162945.7 10 ft WBO-19-V-47 2390335.9 162903.9 10 ft

WBO-19-V-15 2375610.6 165725.1 10 ft WBO-19-V-48 2387036.6 163410.1 10 ft

WBO-19-V-16 2376808.5 168450.8 10 ft WBO-19-V-49 2392342.1 153057.4 10 ft

WBO-19-V-17 2378016.7 171196.7 10 ft WBO-19-V-50 2388790.1 165710.5 10 ft

WBO-19-V-18 2379227.5 173965.6 10 ft WBO-19-V-51 2384516.9 147683.8 10 ft

WBO-19-V-19 2364970.5 151798.5 10 ft WBO-19-V-52 2388991.2 147402.4 10 ft

WBO-19-V-20 2367057.7 153953.0 10 ft WBO-19-V-53 2386799.0 151044.8 10 ft

WBO-19-V-21 2369149.4 156113.2 10 ft WBO-19-V-54 2387976.4 152740.6 10 ft

WBO-19-V-22 2367095.5 149715.2 10 ft WBO-19-V-55 2391060.2 154755.5 10 ft

WBO-19-V-23 2369232.2 151869.7 10 ft WBO-19-V-56 2390352.7 157047.2 10 ft

WBO-19-V-24 2371306.5 154023.3 10 ft WBO-19-V-57 2380148.0 157810.3 10 ft

WBO-19-V-25 2369283.0 147652.7 10 ft WBO-19-V-58 2392059.5 159726.9 10 ft

WBO-19-V-26 2371328.1 149805.4 10 ft WBO-19-V-59 2387718.9 159570.4 10 ft

WBO-19-V-27 2374654.5 151426.5 10 ft WBO-19-V-60 2388839.3 161113.3 10 ft

WBO-19-V-28 2384346.1 160988.2 10 ft

WBO-19-V-29 2381090.9 163310.3 10 ft

WBO-19-V-30 2382294.8 166044.4 10 ft

WBO-19-V-31 2383490.3 168769.7 10 ft

WBO-19-V-32 2384730.9 171535.0 10 ft

WBO-19-V-33 2371387.1 145590.2 10 ft

10. Submittals Timeline. The Contractor is responsible for maintaining the Submittal Timeline shown below.

Table 2. Submittals Description and Timeline.

Event Expected Duration USACE Responsibility

Contractor Responsibility

Contract Award 1 Calendar Day

E-Verify (Initial) List of Designated Employees Submittal

2 Business Days

Safety Plan Submittal 4 Calendar Days

USACE Safety Plan Approval 3 Business Days

Notice to Proceed 5 Business Day To Mobilize to Site and Initiate Work

Drilling and Execution Phases 1 and 2 Mobilization & Drilling Cut, Photograph & Log Vibracores Preliminary Drilling Log, Photograph & Penetrometer Submittal

60 Calendar Days

USACE Sample Selection within 4 business days of boring completion

Not Calculated in Contractors Duration

USACE Review & Comment on Preliminary Logs from last round of borings (4 business days)

Not Calculated in Contractors Duration

Draft Lab Test Submittal 20 Calendar Days from USACE sample selection

Draft Final Report Submittal 5 Calendar Days from Contractor 's final receipt of lab data

USACE Review & Comment Draft Final Report

5 Business Days

Final Report Submittal 5 Calendar Days

Contract Closeout 10 Calendar Days

Approximate Total 120 Calendar Days

*Assume 5-day window for USACE to make Phase 2 boring location determiniations upon completion of Phase 1 drilling.

If the Contractor encounters unforeseen delays in meeting an event on the timeline, he or she shall notify the KO and COR in writing no earlier than 5 business days prior to the due date. The Contractor shall describe the circumstances that led to the delay, his or her immediate actions to mitigate impacts to schedule, and event/timeline updates.

Ms. Rosalind Shoemaker (910-251-4436)

Submittals shall be sent electronically to the KO, COR and Technical POC’s listed below:

Rosalind.M.Shoemaker@usace.army.mil (or her designee);

Mitch.H.Hall@usace.army.mil;

Stephen.J.Fabian@usace.army.mil;

Lisa.Bishop@usace.army.mil

The Final Report shall be bound and titled; “Subsurface Investigation and Geotechnical Laboratory Testing Results, Wrightsville Beach Coastal Storm Risk Management Project, Offshore Borrow Investigation,” containing all the elements and meeting the requirements herein. One hard copy of the Final Report shall be submitted by the Contractor, and deemed acceptable by USACE before final payment is made.

Final Submittals shall be made to the following recipient:

Mr. Mitchell H. Hall (CESAW-ECP-EG), Section Chief, Geotechnical and Dam Safety Section, 69 Darlington Avenue, Wilmington, NC 28403-1343.

One hard copy of the Final Report shall be mailed to Mr. Mitchell H. Hall and a digital copy shall be provided to the technical POCs, Mr. Fabian and Mrs. Bishop.

10. Safety. Safety of all parties is a major concern. The Contractor shall coordinate the work effort with the U. S.

Coast Guard and comply with all their requirements and requests. The Contractor shall ensure that drilling operations have a minimal effect on navigation. The Contractor shall comply with guidance established in the Corps of Engineers Safety Manual, EM 385-1-1, dated 30 NOV 2014 and any applicable State, Federal, and U. S.

Coast Guard regulations. The Contractor shall submit an Accident Prevention Plan to USACE for approval no more than four (4) calendar days following contract award. No field work shall be performed until the plan is mailto:Stephen.J.Fabian@usace.army.mil approved by USACE. The plan shall follow the guidelines established in EM 385-1-1 to include: the location of the work site; verified emergency contact information for the local US Coast Guard station(s); evacuation plan to the nearest medical facility; emergency radio frequencies and telephone numbers; required safety equipment;

certified first aid personnel; spill prevention and HAZMAT information; and an Activity Hazard Analysis. The Contractor shall be responsible for conducting a daily Safety Brief and Risk Assessment prior to commencing work each day. All personnel shall be properly clothed and protected for working on the water. Wilmington District reserves the right to halt drilling operations for any safety violation. The Wilmington Safety Officer is Mr. Bill Harris and he may be reached at 910-251-4698.

11. Anti-Terrorism and Operations Security.

The contractor shall pre-screen candidates using the E-Verify Program (http://www.uscis.gov/e-verify) website to meet the established employment eligibility requirements. The vendor shall ensure that each Candidate has two valid forms of government issued identification prior to enrollment to ensure the correct information is entered into the E-Verify System. An initial list of verified/eligible candidates shall be provided to the COR no later than 2 business days after the initial contract award. When contracts are with individuals, the individuals shall be required to complete a Form I-9, Employment Eligibility Verification, with the designated Government representative. This Form shall be provided to the KO and shall become part of the official contract file.

12. Payment Process

Payment of this contract is to be broken up into three portions. The first 60 vibracores is the first portion, the second 60 vibracores is the second portion, and the third portion consists of the remaining 55 vibracores with the completion of the final report and review of the entire dataset from SAW personnel. Each portion of the awarded contract represents 33% of the total amount awarded. The first and second portion of contract must include draft gINT core logs with grain size data, and core photographs. The third portion of the awarded contract will be paid out after the completion of USACE personnel reviewing the Final Report. The final report will include a description of the work, a map with the final vibracore boring locations, Final Drilling Logs, penetrometer records, core photographic mosaics, and lab test data, complete with gradation tables and curves for each sample tested and a summary table. In addition to the hard copy of the Final Report, the Contractor shall furnish electronic/digital files containing all the lab test data in Excel and PDF formats, the gINT project database file, and ArcGIS shapefiles, layers, or feature classes showing vibracoring locations. Electronic/digital lab test data files shall contain the project name at the top, boring number, sample identification number, depth of sample, visual classification, and percentage passing each sieve (highlight #200 sieve), visual percent of rock and shell content, and the mean and median grain size for each sample.

http://www.uscis.gov/e-verify

Figure 1. Wrightsville Beach Offshore Borings (60 shown) for Phase 1 Geotechnical Investigation. Additional 115 borings will be designated by USACE for the Contractor to drill, based upon USACE evaluation of preliminary drilling logs and field data.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 120 dys. ADC 1 GEOTECH & ENVIRONMENTAL

REMEDIATION SEC

MITCH HALL

USAED, WILMINGTON 69 DARLINGTON

AVE.

WILMINGTON NC 28403

910-251-4742

W912PM

0002 120 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0003 120 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions NOV 2013

52.203-3 Gratuities APR 1984

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

OCT 2010

52.203-17 Contractor Employee Whistleblower Rights and Requirement

To Inform Employees of Whistleblower Rights

APR 2014

52.203-19 Prohibition on Requiring Certain Internal Confidentiality

Agreements or Statements

JAN 2017

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011

52.204-13 System for Award Management Maintenance OCT 2018

52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018

52.219-6 (Dev) Notice of Total Small Business Set-Aside (DEVIATION

2019-O0003).

JAN 2019

52.223-2 Affirmative Procurement of Biobased Products Under Service and Construction Contracts

SEP 2013

52.223-3 Hazardous Material Identification And Material Safety Data JAN 1997

52.223-5 Pollution Prevention and Right-to-Know Information MAY 2011

52.223-17 Affirmative Procurement of EPA-Designated Items in Service and Construction Contracts

AUG 2018

52.228-5 Insurance - Work On A Government Installation JAN 1997

52.229-3 Federal, State And Local Taxes FEB 2013

52.232-8 Discounts For Prompt Payment FEB 2002

52.232-17 Interest MAY 2014

52.232-23 Assignment Of Claims MAY 2014

52.232-37 Multiple Payment Arrangements MAY 1999

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-1 Disputes MAY 2014

52.233-3 Protest After Award AUG 1996

52.233-4 Applicable Law for Breach of Contract Claim OCT 2004

52.242-13 Bankruptcy JUL 1995

52.243-1 Alt I Changes--Fixed Price (Aug 1987) - Alternate I APR 1984

52.246-4 Inspection Of Services--Fixed Price AUG 1996

52.246-16 Responsibility For Supplies APR 1984

52.246-25 Limitation Of Liability--Services FEB 1997

252.201-7000 Contracting Officer's Representative DEC 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7006 Billing Instructions OCT 2005

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

OCT 2016

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of

Terrorism

MAY 2019

252.223-7001 Hazard Warning Labels DEC 1991

252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or

Hazardous Materials

SEP 2014

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013

252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017

252.225-7048 Export-Controlled Items JUN 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.243-7002 Requests for Equitable Adjustment DEC 2012

252.244-7000 Subcontracts for Commercial Items JUN 2013

252.246-7003 Notification of Potential Safety Issues JUN 2013

252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAY 2019)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995)

(41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June

2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment

Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

_X_ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41

U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014)

(if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

_X_ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

_X_ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Aug 2018) of 52.219-9.

_X_ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

_X_ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C.

657f).

_X_ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns

Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

_X_ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

____(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

_X_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (28)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (Feb 1999) of 52.222-26.

_X_ (29)(i) 52.222-35, Equal Opportunity for Veterans (OCT 2015)(38 U.S.C. 4212).

____ (ii) Alternate I (July 2014) of 52.222-35.

_X_ (30)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

____ (ii) Alternate I (July 2014) of 52.222-36.

_X_ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

_X_ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

_X_ (33)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

_X_ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in

22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May

2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun

2016) (E.O. 13693).

____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(Jun 2016) (E.O. 13693).

____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and

13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (41)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s

13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O.

13513).

____ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

____ (44) 52.223-21, Foams (Jun 2016) (E.O. 13693).

____ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter

83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (48) 52.225-5, Trade Agreements (AUG 2018) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (49) 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10

U.S.C. 2307(f)).

____ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

_X_ (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Oct 2018) (31

U.S.C. 3332).

____ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July

2013) (31 U.S.C. 3332).

____ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

____ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_X__ (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_X__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple

Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_X__ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY

2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by

Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) _____ (A) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirem…