A2_SOW_-_Hoist.pdf

Statement of Work

US Army Corps of Engineers

W. Kerr Scott Dam and Reservoir

Wilkesboro, NC

New Emergency Gate Hoist

1. GENERAL

1.0 Summary of Work

The contractor shall provide and deliver a 40,000 lbs. Electric Hoist mounted on a trolley in accordance with the requirements and specifications listed below

1.2 Requirements

The new hoist and trolley shall be able to be installed and made operational with minimal impact to the existing structure. Minimal impact includes wiring and controls changes necessary to facilitate the new hoist. Hoist shall be capable of operating on existing girder and with power provided as specified below. Hoist shall include necessary rope to meet specifications below

1.1 Delivery

The contractor is responsible for all costs associated with delivery.

Items shall be delivered to:

US Army Corps of Engineers

499 Reservoir Rd.

Wilkesboro NC, 28697

Point of contact:

Tim Taylor

Timmothy.L.Taylor@usace.army.mil

(336) 921-3390

2. Specifications:

2.1 Electric Hoist

-Load: 40,000 lbs

-Available Voltage: 240V

-Height of Lift: 100 ft.

-Length of Hoist Wire Rope: 200 ft (hoist located approx. 100 ft above gate)

-Hoist Duty Group: ISO M6

-Hoist motor Type: P6 (MF13Z-106)

-Hoist speed, high: 12.5 ft/min mailto:Timmothy.L.Taylor@usace.army.mil

-Hoist speed, low: 2.10 ft/min

-Data Plate Language: English

-Hoist Starting Current: 149 A

-Hoist Nominal Current: 32.0 A

-Overload Device: SG

-Condition Monitoring: CID

-Electric Assembly: CSA

-Electric Provision: SOLO

-Hoist Control Type: 2sp

2.2 Trolley

-Girder Width: 6 in.

-Trolley Type: N

-Trolley Speed: 65 ft/min

-Traversing control type: Dyna 60

-Traversing Duty Group: ISO M5

-Starting Current: 2.1 A

-Nominal Current: 1.7 A

-Speed Control method: EP

-Speed Control Location: Trolley Panel

-Speed Control Acc. Time 3.6s

-Speed Control Adjusted frequency max. Speed: 97 Hz

2.3 Additional Features

-Hook Operated Control Limit Switch

-Trolley Travelling motor thermal protection

-Overload Protector

-ControlPro Lifetime

-ControlPro Perform

-TruConnect Remote Services

-Stainless steel hoist control panel

-DIN Hook

-Standby heating for hoisting motor

-Standby heating for trolley traversing motor

-Standby heating for hoist control panel

-IP66 hoist motor protection

-IP66 trolley motor protection

-IP-type of hoist panel

-Rain Covers for Hoist

-Counterpart for trolley power feeding plug

-Electric Provision

-Trolley travel inverter braking resistor

-Condition Monitoring

2.4 Push Button Station

-Cable Length: 103’-9”

-Control Voltage: 115V

-Control Method: 2-step push button

-Plug-in connector for pendant cable

-Main contactor button function

2.5 Documents

-Language: English

-Hoist Owner’s Manual

-Hoist Inspection Test Record

-Wire Rope Certificate

-Hook Forging Certificate

3. Invoicing:

The Contractor shall submit the invoice to:

U.S. Army Corps of Engineers

Attn: Timmothy Taylor

499 Reservoir Rd.

Wilkesboro, NC 28697

The contractor shall ensure that the following are included on the Invoice:

• Contract #

• Invoice #

• Company name, as shown on the contract

• Invoiced line item(s) must match the contract line items

• If applicable, indicate on the invoice if you are a Small Business, Veteran Owned, or 8A.