A02._Scope_of_Work.pdf

Rivers Project Office – Service Base Dredge Potter

B10 Fuel purchase for Oil Barge CE-64

Scope of Work

Project

CE-64 the contractor shall provide 200,000 gallons (plus or minus 10%) of Biodiesel blend, B10 (10% Biodiesel and 90% Diesel

Fuel 2(DF2)). The biodiesel shall be soy based and must meet ASTM D6751 standard for Biodiesel.

Location

The location of the fuel point location shall be within 125 river miles of the U.S. Army Corps of Engineers, Service Base

(UMR 177). Coordination of the fueling shall be made with Patrick Wadlow and Ted Bielecki. The loading dock that the fuel barge is going to be loaded at must be US Coast Guard approved. You must provide a copy of your U.S. Coast Guard

Approved Dock Certification with your quote.

Tankerman

The contractor shall provide a licensed tanker man during the transfer of fuel to CE-64 for the duration of the refueling.

EPA Designated (CPG) Under the Comprehensive Procurement Guidelines (CPG) program, the Environmental Protection Agency (EPA) designates products that are or can be made with recovered materials, and recommends practices for buying these products. Any designated product that is being offered or supplied under this contract shall meet the minimum recommended content levels as identified under the CPG program. Visit http://www.epa.gov/epawaste/conserve/tools/cpg/products for a complete list of designated products and the associated recommended content levels. Offerors must be able to demonstrate that each offered product meets minimum content levels upon request. Bio-Diesel additives in the Additive section below shall comply with this section.

Bio-based The United States Department of Agriculture (USDA) designates certain biobased products for federal procurement and specifies minimum biobased content levels for those products. Any designated product that is being offered or supplied under this contract shall meet USDA BioPreferred’s minimum biobased content level. Visit the BioPreferred web site for the complete list of designated products and the associated minimum biobased content level requirements.

Additives:

The contractor shall furnish biocide, anti-gel, and a fuel treatment (Lucas Diesel Fuel Additive) necessary for the quantity of fuel being delivered. All additives shall be dumped in each compartment prior to transferring of the fuel. This will assure a good mixing of fuel and the needed additives. Material Safety Data Sheet (MSDS) of the fuel and various additives shall be submitted to Star Loftus.

Quality Assurance:

The Contractor shall comply with following requirements to ensure quality fuel delivery.

1. All fuel shall be procured and delivered from a licensed storage terminal and documentation provided as such.

2. Each delivery should be documented with an official Bill of Lading (BOL) from the terminal.

3. An official terminal product quality test document should accompany final delivery invoice.

4. Any Biodiesel delivery should be accompanied by a certificate of analysis document.

5. Any fuel additive delivered shall be accompanied by a Material Safety Data Sheet (MSDS).

6. Contractor shall have suitable containers on hand to provide 3 fuel samples to the Government for performing independent testing.

Proposal The contractor shall provide proposals with the following cost breakdown:

Cost per Gal of B10

Lump sum of Biocide

Lump sum of Anti-gel

Lump sum of Lucas Diesel Fuel Treatment

Estimated time for refueling

Provide certification for your U.S. Coast Guard Approved Dock

Point of Contact

Contract Specialist Reid Drewes, 314-331-8384, Reid.A.Drewes@usace.army.mil