Page_32_Permanent_Power_to_Site_A02_CF_PumpSta4_ADV_specs.pdf

01 10 25-2

1.7 STEEL H-PILING, FURNISH.

1.7.1 Measurement. Measurement for furnishing and delivering steel H-piles, for the type and lengths specified, will be made by the linear foot for piles delivered at the site of the work.

1.7.2 Payment. Payment for “Steel H Piling, Furnish HP14x117” and “Steel H Piling, Furnish HP12x53”, will be made for costs associated with furnishing and delivering steel H-piles to the site of the work as specified in SECTION 31 62 16 - STEEL H-PILES.

1.8 STEEL H-PILING, INSTALL.

1.8.1 Measurement. Measurement for driving steel H-piles, will be made by the linear foot measured to the nearest tenth of a linear foot, on the basis of lengths along the axis of the pile acceptably in place below the excavation grade elevation. The drive length of the piles shall not include the pile points associated with paragraph 1.6 FURNISH AND INSTALL HP14 PILE POINTS above.

1.8.2 Payment. Payment for “Steel H Piling, Install HP14x117” and “Steel H Piling, Install HP12x53”, will be made for costs associated with driving steel H-pile, handling, cutting off all piles at the cutoff elevations and removing the cutoff portion from the site, completing pile driving records, and any other items incidental to driving the piles as required and as specified in SECTION 31 62 16 - STEEL H-PILES.

1.8.3 Undamaged Pulled Piles. Piles which are pulled at the direction of the Contracting Officer, and found to be in good condition, will be paid for as follows:

(a) The cost of furnishing, delivering and driving prior to direction to pulling pile, will be paid as specified in paragraphs 1.7 and 1.8.2 above.

(b) The cost of pulling and redriving will be paid at the same contract unit price per linear foot as specified in paragraph 1.8.1 above.

1.9 ESTABLISHMENT OF TURF. Payment for all costs associated with the establishment of turf within the construction limits will be made at the contract job price for "Establishment of Turf", which price and payment shall constitute full compensation for furnishing all work specified in SECTION 32 95 00 - ESTABLISHMENT OF TURF and SECTION 31 23 73 – GEOTEXTILE. No payment will be made for any refertilization or reseeding which may be required, and all costs in connection therewith shall be at no expense to the Government.

1.10 CARE OF WATER. Payment for care of water, including piezometers, will be made at the contract job price for “Care of Water”, which price and payment shall constitute full compensation for providing all plant, labor, material and equipment and performing all operation necessary to complete the work as specified in SECTION 02 21 40 – CARE OF WATER and as shown on the drawings.

1.11 PERMANENT POWER TO SITE. The contractor is responsible for obtaining an estimated cost received from Ameren. The Contractor shall coordinate all project requirements with Ameren and seek any revisions to the originally provided estimate. The Contractor shall submit copies of documentation from Ameren showing the revised estimate to complete the work to the Government within 30 days of installation.

1.12 PIPE. Payment for DIP discharge pipe and RCP collector system pipe will be made at the contract unit price per linear feet for “24” DIP