A21-W912P817B0008_Am_0004.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The above numbered solicitation is hereby amended to incorporate changes on the follow ing pages and to establish a bid opening date.

A BID OPENING DATE OF 30 AUGUST 2018, 2:00PM LOCAL TIME IS HEREBY ESTABLISHED.

1. CONTRACT ID CODE PAGE OF PAGES

1 15

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912P8-17-B-0008

X 9B. DATED (SEE ITEM 11)

22-Feb-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

00004

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

22-Aug-2018

CODE

USACE, CONTRACTING DIVISION

ATTN: CEMVN-CT, ROOM 172

7400 LEAKE AVE.

NEW ORLEANS LA 70118-3651

W912P8 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION 00010

Pages 00010-3 and 4. Delete these pages in their entirety and substitute the attached pages 00010-3, 4, and 5 therefore.

PROJECT TABLE OF CONTENTS

Page PTC-i. Delete this page in its entirety and substitute the attached revised page PTC-i therefore.

SECTION 02 21 10.00 12

Page 2, paragraph 1.2. Delete this paragraph in its entirety and substitute the following therefore:

“1.2 MEASUREMENT AND PAYMENT

No separate measurement and payment will be made for surveys as specified herein. Payment shall be included in the applicable contract unit price per cubic yard for “Dredging – Alternative 1” or “Dredging – Alternative 2”.”

SECTION 35 20 23.00 12

1. Page 4, paragraph 1.3.2. Delete this paragraph in its entirety and substitute the following

“1.3.2 Dredging

Payment for dredging will be made at the applicable contract unit price per cubic yard for “Dredging – Alternative 1” or “Dredging – Alternative 2”. Price and payment shall constitute full compensation for furnishing all plant, labor and materials and performing all work for surveying, including any additional soundings that may be directed, grab sampling, excavation, disposal of materials, furnishing diesel powered crewboats fully operated, aluminum skiff fully operated, pollution control, furnishing and maintaining radio and telephone communications equipment, and all operations incidental thereto.”

2. Page 10, paragraph 3.1.3. Delete this paragraph in its entirety and substitute the following

“3.1.3 Channel Dimensions

The channel shall be dredged to the required dimensions shown on the contract drawings and indicated below. A box cut will be permitted. The extent of the required dredging and control of the box cut is illustrated in the Box Cut detail attached at the end of this section. As depicted on the contract bidding schedule, alternative bidding channel dimensions are required and defined below.

From C/L Stations 70+00 to 5+50, required channel template is defined as:

Depth (-) 16.0 feet MLG at a Bottom Width of 125 feet.

Requirements for this reach of channel remain the same for both alternatives.

From C/L Stations 0+00 to (-) 210+00, required channel template for Alternative 1 is defined as: Depth (-) 16 feet MLG at a Bottom Width of 250 feet in width.

From C/L Stations 0+00 to (-) 210+00, required channel template for Alternative 2 is defined as: Depth (-) 16 feet MLG at a Bottom Width of 200 feet in width.

From C/L Stations 5+50 to 0+00, required channel template is defined as:

Depth (-) 16.0 feet MLG with a uniform bottom width transition from 125 feet to the applicable Alternative bottom width of either 250 feet or 200 feet.”

3. Page 11, paragraph 3.1.6. Near the top of this this page, change “Note: Channel transitions from 125 feet to 250 feet in width between C/L Stations 5+50 and 0+00.” to read “Note:

Channel transitions from 125 feet to the applicable Alternative bottom width of either 250 feet or 200 feet.”

DRAWINGS

SHEET IDENTIFICATION Nos. C-03 through C-05. Delete these drawings in their entirety and substitute the attached revised drawings, SHEET IDENTIFICATION Nos. C-03 through C- 05, therefore.

SECTION 00010 – BIDDING SCHEDULE

Freshwater Bayou Maintenance Dredging

Lock to the Gulf Vermilion Parish, Louisiana

00010-3 ED 15-025

Item DESCRIPTION Estimated Quantity Unit Unit Price Estimated Amount

BASE WORK

0001 Mobilization and Demobilization 1 JOB

ALTERNATIVE 1 – 250 FOOT EXTERIOR BOTTOM WIDTH

0002 Dredging – Alternative 1

0002AA First 1,000,000 1,000,000 CY

0002AB All Over 1,000,000 300,000 CY

ALTERNATIVE 2 – 200 FOOT EXTERIOR BOTTOM WIDTH

0003 Dredging – Alternative 2

0003AA First 750,000 750,000 CY

0003AB All Over 750,000 250,000 CY

BASE WORK:

TOTAL ALTERNATIVE 1

TOTAL 1 - BASE WORK + ALTERNATIVE 1

TOTAL ALTERNATIVE 2

TOTAL 2 - BASE WORK + ALTERNATIVE 2

Award will be made as a whole to one bidder, based on TOTAL WORK price for row “TOTAL 1 - BASE WORK + ALTERNATIVE 1” or “TOTAL 2 - BASE WORK + ALTERNATIVE 2”.

NOTE 1: The intent of the Government is to award “Alternative 1”. Due to limited availability of funds, final selection of Alternative to be awarded by the Government will be based on the Total Work price for row “TOTAL 1 - BASE WORK + ALTERNATIVE 1” or “TOTAL 2 - BASE WORK + ALTERNATIVE 2” and the Government availability of funds at the moment of award. The Base Work and Alternative 1 will be selected for award if funds sufficient to make award of that work are available at the time of bid opening. If funds sufficient to make award of the Base Work and Alternative 1 are not available at the time of bid opening, the Base Work and Alternative 2 will be awarded, provided funds sufficient for award of such work are available. Bidders must bid on both alternatives. If the bidder omits both the unit price and the extended amounts for any of the items in the base work, alternative 1, or alternative 2 sections, then the bid will be declared

00010-4 ED 15-025

non-responsive.

NOTE 2: The unit “Job” as used in this Bidding Schedule is synonymous with the term “Lump Sum” used elsewhere within these plans and specifications.

NOTE 3: Bidders shall furnish unit prices for each item listed in the Schedule requiring a unit price. If the bidder fails to insert a unit price in the appropriate blank for required item(s), but does furnish an extended total, or an estimated amount for such item(s), the Government shall deem the unit price to be the quotient obtained by dividing the extended amount for that line item by the quantity. IF A BIDDER OMITS BOTH THE UNIT PRICE

AND THE EXTENDED TOTAL OR ESTIMATED AMOUNT FOR ANY ITEM, ITS BID SHALL

BE DECLARED NON-RESPONSIVE AND THEREFORE INELIGIBLE FOR AWARD.

NOTE 4: Any bid may be rejected if the Contracting Officer determines in writing that it is unreasonable as to price. Unreasonableness of price includes not only the total price of bid, but the price for individual line items as well. Any bid may be rejected if the prices for any line items or subline items are materially unbalanced (See FAR 14.404-2).

NOTE 5: THE NOTICE TO PROCEED (NTP): The successful bidder is advised that performance and payment bonds shall be submitted in accordance with the time frame in block 12B of SF 1442 after Notice of Award. The NTP will be issued immediately after verification of acceptable performance and payment bonds. Within 24 hours after issuance of the NTP, the Contractor shall initiate a meeting to discuss the submittal process with the Area or Resident Engineer or his authorized representative. Physical work cannot start until the Accident Prevention Program, Contractor Quality Control Plan, and other submittals which may be required, have been submitted and approved and all preliminary meetings called for under the contract, have been conducted.

NOTE 6: Rapid Vendor Payment: Web based instructions for the submission of invoices may be found at the following website:

http://www.mvn.usace.army.mil/BusinessWithUs/Contracting/RapidVendorPayment http://www.mvn.usace.army.mil/BusinessWithUs/Contracting/RapidVendorPayment

00010-5 ED 15-025

EVALUATION OF SUBDIVIDED ITEMS. (UAI 52.211-5000 - Nov 14). Item Nos.

0002 and 0003 are subdivided into two or more estimated quantities and are to be separately priced. The Government will evaluate each of these items on the basis of total price of its sub-items.

VARIATIONS IN ESTIMATED QUANTITIES - SUBDIVIDED ITEMS. (UAI 52.211-

5001 – Nov 14). This variation in estimated quantities clause is applicable only in Item Nos. 0002 and 0003.

a. Variation from the estimated quantity in the actual work performed under any second or subsequent sub-item or elimination of all work under such a second or subsequent sub-item will not be the basis for an adjustment in contract unit price.

b. Where the actual quantity of work performed for Item Nos. 0002 and 0003 is less than 85% of the quantity of the first sub-item listed under such item, the contractor will be paid at the contract unit price for that sub-item for the actual quantity of work performed and, in addition, an equitable adjustment shall be made in accordance with the clause FAR 52.212-11, variation in estimated quantities.

c. If the actual quantity of work performed under Item Nos. 0002 or 0003 exceeds 115% or is less than 85% of the total estimated quantity of the sub-item, and/or if the quantity of work performed under the second sub-item or any subsequent sub-item under Item No. NONE exceeds 115% or is less than 85% of the estimated quantity of any such sub-item, and if such variation causes an increase or a decrease in the time required for performance of this contract, the contract completion time will be adjusted in accordance with the clause FAR 52.211-18, Variation in Estimated Quantity.

Freshwater Bayou Maintenance Dredging

Lock to the Gulf Vermilion Parish, Louisiana

PTC-i ED 15-025

PROJECT TABLE OF CONTENTS

Division 00 – PROCUREMENT AND CONTRACT REQUIREMENTS

00010 Solicitation, Offer and Award (SF-1442) Bidding Schedule

00100 Instructions to Bidders

00600 Representations and Certifications

00700 Contract Clauses

00800 Special Contract Requirements

Division 01 - GENERAL REQUIREMENTS

01100 General Provisions

01 32 16.00 20 Construction Progress Schedules

01 33 00 Submittal Procedures

01 45 00.15 10 Resident Management System Contractor Mode (RMS CM)

01 45 04.00 10 Contractor Quality Control

01 57 20.01 12 Environmental Protection - Dredging

01 78 02.00 10 Closeout Submittals

Division 02 - SITE WORK

02 21 10.00 12 Surveys

Division 35 – WATERWAY AND MARINE CONSTRUCTION

35 20 23.00 12 Dredging

General Decision Number: LA180011 01/05/2018 LA11

Superseded General Decision Number: LA20170011

State: Louisiana

Construction Type: Heavy Dredging

Counties: Louisiana Statewide.

DREDGING PROJECTS ALONG THE GULF COAST AREA INCLUDING THE

MISSISSIPPI RIVER AND ITS TRIBUTARIES TO THE OHIO RIVER

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015.

If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/05/2018

* SULA1994-001 04/01/1994

Rates Fringes

Derrick Operator.................$ 7.25

Dozer Operator...................$ 7.25

Dredge 16" and Over Deckhand....................$ 7.25 Dredge tender operator......$ 7.25 Fireman.....................$ 7.25 First assistant engineer....$ 7.25 Leverman....................$ 7.25 Oiler.......................$ 7.25 Second assistant engineer...$ 7.25 Shoreman....................$ 7.25 Third assistant engineer....$ 7.25 Truck driver................$ 7.25 Welder......................$ 7.25

Dredge Under 16" Deckhand....................$ 7.25 Dredge tender operator......$ 7.25 Leverman....................$ 7.25 Oiler.......................$ 7.25 Welder......................$ 7.25

Hydraulic Dredging First cook..................$ 7.25 Handyman....................$ 7.25 Janitor, cabin person.......$ 7.25 Second cook.................$ 7.25

Marsh Buggy Dragline, Oiler......$ 7.25

Marsh Buggy Dragline, Operator...$ 7.25

Self-Propelled Hopper Dredge, Drag Tender......................$ 9.70 3.45+a

FOOTNOTE: Fourteen paid vacation days and eight paid holidays: New Year's Day, Good Friday, Memorial Day, Independence Day, Labor Day, Veterans' Day, Thanksgiving Day & Christmas Day provided the employee has one year of service.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION