Amendment_0002_Waukegan_Dredging_W912P614B0002.pdf

W81G66-0018-7993

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

W912P6-14-B-0002, "WAUKEGAN DREDGING"

This Amendment EXTENDS the Bid Opening date for this Solicitation. Accordingly, the Bid Opening Date is changed from 3 July 2014 to 9 July 2014; the time for opening bids remains 2:00 p.m. CDT, therefore, all bids must be furnished PRIOR to 2:00 p.m. on 9 July 2014 to be considered timely.

The Contingency Statement posted to Page 1 of the Solicitation document is hereby removed as the USACE has received the Section 10, IL State Permit. Said permit is enclosed herew ith.

SEE THE FOLLOWING PAGES FOR A CONTINUATION OF THIS AMENDMENT

1. CONTRACT ID CODE PAGE OF PAGES

J 1 17

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-Jun-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912P6-14-B-0002

X 9B. DATED (SEE ITEM 11)

03-Jun-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Jun-2014

CODE

U. S. ARMY ENGINEER DISTRICT, CHICAGO

231 SOUTH LASALLE STREET SUITE 1500

CHICAGO IL 60604-1437

W912P6 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912P6-14-B-0002

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

AMENDMENT PARTICULARS:

A. AMENDED SOLICITATION SECTIONS:

(1) Section 00010: The Bid Schedule issued with the Solicitation has been revised to incorporate multiple changes; therefore, a new Bid Schedule is being issued hereunder. Accordingly, Bidders shall replace the previously issued Bid Schedule with the Revised Bid Schedule included in this Amendment and is required to fully complete ALL line items to be considered responsive to the IFB and eligible for a contract award.

(2) Section 00010: At paragraph 2 under “IMPORTANT NOTES REGARDING THIS ACQUISITION,” the exercise of Options paragraph is changed to read as below; this language is also being included at the bottom of the Revised Bid Schedule:

EXERCISING OF OPTION ITEMS:

The Government intends to immediately award the Base Bid Items. At the discretion of the government, the OPTION Items in the Bid Schedule may be awarded at the bid prices stated in the Bid Schedule within the timeframes stated below. Note: The Government does not guarantee any work beyond the Base Bid work (items).

• Any, all or none of Line Items 0010, 0014 and 0017‐0022 may be exercised within 60 calendar days following the contract award. The number of construction days to be added if any item is exercised is 0 calendar days. Any award/exercise of an option item will be accomplished via a formal contract modification under the contract.

• Any, all or none of Line Items 0023‐0030 may be exercised within 365 calendar days following the contract award. The number of construction days to be added if any item is exercised is as follows:

CLIN 0023, Option A: 0 calendar days CLIN 0024, Option B: 45 calendar days CLIN 0025, Option C: 10 calendar days CLIN 0026, Option D: 10 calendar days CLIN 0027, Option E: 20 calendar days CLIN 0028, Option F: 20 calendar days CLIN 0029, Option G: 20 calendar days

CLIN 0030 (Bonding line item) This CLIN will must be exercised when any option is awarded

Any award/exercise of an option item will be accomplished via a formal contract modification under the contract.

(3) Section 00700 (contract clauses): The following provisions/clauses have been added or deleted as detailed below.

The following have been added by reference:

252.243-7001 Pricing Of Contract Modifications DEC 1991

The following have been deleted:

52.217-9 Option To Extend The Term Of The Contract MAR 2000

52.232-5003 SPECIAL CONTINUING CONTRACT CLAUSE JAN 2007

52.232-5004 INCREMENTAL FUNDING CLAUSE JAN 2007

52.252-4 Alterations in Contract APR 1984 52.252-6 Authorized Deviations In Clauses APR 1984 252.217-7000 Exercise Of Option To Fulfill Foreign Military Sales

Commitments

DEC 1991

252.225-7993 (Dev) Prohibition on Contracting with the Enemy (Deviation) FEB 2014 252.232-7006 Wide Area WorkFlow Payment Instructions MAY 2013 252.236-7006 Cost Limitation JAN 1997

B. AMENDED PROJECT SPECIFICATION SECTIONS: The following Specification Sections have been amended as delineated below; therefore bidders shall remove the affected pages and replace them with the respective pages attached hereto.

‐ Section 01 22 00 – “Job” items have been renamed to “Lump Sum” and CLINs have been renumbered to match the revised bid schedule.

‐ Section 01 57 21 ‐ Reference to the pending IL State Permit (Section 10) has been removed.

Permit is attached at the end of revised section.

C. AMENDED PROJECT DRAWING SHEETS: One drawing sheet has been amended as delineated below;

therefore bidders shall replace the affected sheet with the respective sheet attached hereto.

‐ Drawing sheet C‐102 (revised to correct the location of work limits 14 and 15)

D. WAGE RATES: This Amendment incorporates the correct Davis Bacon wage rates, IL140018, dated 05/23/2014, which are attached hereto.

E. POINT OF CONTACT: The point of contact for this Amendment is Regina Blair at 312‐846‐5371 or Major Warren at 312‐846‐5494.

USACE RESPONSES TO CONTRACTOR’S QUESTIONS

Inquiry #1: Clauses: 52.211‐10 Commencement, prosecution, and Completion of Work: Allows 400 calendar for completion of work. Section 01‐57‐20: No Dredging is allowed in the approach Channel in 2015 unless the government is provided new permits for the work. Does the FY14 approach channel dredging have to be complete in 2014 or is it expected the new permits will be provided and work can take place in 2015?

Does the inner harbor dredging need to be complete in 2014?

USACE Response #1:

a. The FY14 Approach Channel dredging will need to be completed this calendar year. The FY15 option work will be dependent upon receipt of the necessary permit.

b. The Outer Harbor or as you referred to it, the inner harbor, (inside the outer breakwater, but outside of the inner breakwalls) does not need to be completed in this calendar year.

Inquiry #2: Please clarify if the seawall at the land disposal site is included in the work limits. If you protect the wall and accept responsibility for damage, can you moor barges there and place a crane along the wall to off load barges?

USACE Response #2: The sea wall is within the work limits as shown on plan sheet C‐002. Placement of equipment on site is at contractor's discretion assuming it meets specified requirements and fits within the prescribed site layout plan on sheet C‐101. Any damage to existing site facilities would need to be repaired at contractor's expense.

Inquiry #3: General Wage Decision Number: IL20130019 dated 01/24/2014 is included in the solicitation which covers Dredging Construction Projects on the River System in Illinois. In the past, Chicago District dredging projects have always included General Wage Decision Number IL140018 which covers Dredging and Marine Construction on the Great Lakes and is the correct determination for this solicitation. A Heavy and Highway determination should also be included to cover the land based disposal area requirements of the solicitation.

USACE Response #3: The contractor is correct. By this Amendment, the USACE has made the necessary correction by incorporating the attached Wage Determination into the Solicitation.

REVISED BID SCHEDULE (AMENDMENT 0002)

(Contractor’s shall provide their bid prices using the below revised schedule)

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lump Sum

MOBILIZATION / DEMOBILIZATION

FFP

PURCHASE REQUEST NUMBER: W81G66-0018-7993

NET AMT

0002 1 Lump Sum

PROJECT AND SAFETY SIGNS

0003 1 Lump Sum

SILENT SCOW INSPECTOR

0004 1 Lump Sum

PRE-SURVEY

0005 2 Each

MONITORING WELL REMOVAL AND

REINSTALLATION

0006 3,100 Linear

Foot

JERSEY BARRIERS

0007 3,100 Linear

Foot

SILT FENCE

0008 1 Lump Sum

REMOVAL OF JERSEY BARRIERS, SEEDING

AND STABILIZING OF DREDGED MATERIAL IN PLACE

0009 75,000 Cubic

Yard

APPROACH CHANNEL DREDGING AND

DISPOSAL AT PLACEMENT AREA 1

0010 75,000 Cubic

OPTION OPTION WORK: APPROACH CHANNEL DREDGING

AND DISPOSAL AT PLACEMENT AREA 1

0011 1 Lump Sum

WATER QUALITY MONITORING

0012 1 Lump Sum

SEDIMENT SAMPLING

0013 80,000 Cubic

OUTER HARBOR DREDGING

AND DISPOSAL

0014 20,000 Cubic

OPTION OPTION WORK: OUTER HARBOR DREDGING

AND DISPOSAL

0015 1 Lump Sum

PERFORMANCE AND PAYMENT BONDS

(FOR LINE ITEMS 0001-0009 & 0011-0013)

THIS IS A COST-REIMBURSABLE LINE ITEM - The Government will reimburse the Contractor for the actual cost of acceptable payments bond, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The Government will not pay more than the total line item amount for the payment bond. If the actual cost of the bond is less than the line item amount, the contract will modified to adjust the line item accordingly. Adjustment(s) to the line item will also be made for any revisions to the actual bond costs associated with contract changes.

0016 1 Lump Sum

OPTION PERFORMANCE AND PAYMENT BONDS

(FOR LINE ITEMS 0010 and 0014 ) reimburse the Contractor for the actual cost of acceptable payments bond, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The Government will not pay more than the total line item amount for the payment bond. If the actual cost of the bond is less than the line item amount, the contract will modified

0017 75,000 Cubic

TRANSPORTATION OF 75,000 CUBIC

YARDS APPROACH CHANNEL DREDGED MATERIAL TO OPTIONAL

PLACEMENT AREA 2

0018 75,000 Cubic

OPTION TRANSPORTATION 75,000 CUBIC YARDS

ADDITIONAL APPROACH CHANNEL DREDGED MATERIAL TO

OPTIONAL PLACEMENT AREA 2

0019 1 Lump Sum

SITE GRADING, STABILIZATION AND WELL

RAISING FOR 80,000 CUBIC YARDS DREDGED MATERIAL

0020 1 Lump sum

OPTION SITE GRADING AND STABILIZATION FOR

20,000 CUBIC YARDS DREDGED MATERIAL

0021 1 Lump Sum

OPTION POST SURVEY

0022 1 Lump Sum

(FOR OPTION LINE ITEMS 0017 THROUGH 0021)

reimburse the Contractor for the actual cost of acceptable payments bond, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The g overnment will not pay more than the total line item amount for the payment bond. If the actual cost of the bond is less than the line item amount, the contract will modified

0023 1 Lump Sum

OPTION OPTION A

FY15 APPROACH CHANNEL DREDGING DREDGE MOBILIZATION /

DEMOBILIZATION

0024 37,000 Cubic

OPTION OPTION B

FY15 APPROACH CHANNEL DREDGING

0025 13,000 Cubic

OPTION OPTION C

0026 14,000 Cubic

OPTION OPTION D

0027 18,000 Cubic

OPTION OPTION E

0028 18,000 Cubic

OPTION OPTION F

0029 18,000 Cubic

OPTION OPTION G

0030 1 Lump Sum

(FOR LINE ITEMS 0023 THROUGH 0029)

reimburse the Contractor for the actual cost of acceptable payments bond, upon receiving evidence of payment (paid invoice) from the bonding company or agency, not to exceed the total amount of the contract line item. The Government will not pay more than the total line item amount for the payment bond. If the actual cost of the bond is less than the line item amount, the contract will modified

TOTAL BID PRICE (ITEMS 0001 THROUGH 0030): $____________________________

EXERCISING OF OPTION ITEMS:

The Government intends to immediately award the Base Bid Items. At the discretion of the government, the OPTION Items in the Bid Schedule may be awarded at the bid prices stated in the Bid Schedule within the timeframes stated below. Note: The Government does not guarantee any work beyond the Base Bid work (items).

• Any, all or none of Line Items 0010, 0014 and 0017‐0022 may be exercised within 60 calendar days following the contract award. The number of construction days to be added if any item is exercised is 0 calendar days. Any award/exercise of an option item will be accomplished via a formal contract modification under the contract.

• Any, all or none of Line Items 0023‐0030 may be exercised within 365 calendar days following the contract award. The number of construction days to be added if any item is exercised is as follows:

CLIN 0023, Option A: 0 calendar days CLIN 0024, Option B: 45 calendar days CLIN 0025, Option C: 10 calendar days CLIN 0026, Option D: 10 calendar days

CLIN 0027, Option E: 20 calendar days CLIN 0028, Option F: 20 calendar days CLIN 0029, Option G: 20 calendar days

CLIN 0030 (Bonding line item) This CLIN will must be exercised when any option is awarded

Any award/exercise of an option item will be accomplished via a formal contract modification under the contract.

General Decision Number: IL140018 05/23/2014 IL18

Superseded General Decision Number: IL20130018

State: Illinois

Construction Types: Heavy (Dredging and Marine)

Counties: Illinois Statewide.

MECHANICAL DREDGING (CLAMSHELL, DRAGLINE, AND BACKHOE) AND

MARINE CONSTRUCTION):

ILLINOIS, INDIANA, MICHIGAN, MINNESOTA, NEW YORK, OHIO,

PENNSYLVANIA AND WISCONSIN DREDGING AND MARINE CONSTRUCTION

Dredging and Marine Construction Projects: floating/land equipment engaged in clamshell, backhoe and dragline dredging, marine construction, bridges,salvage operations and cranes, loaders, dozers, or other equipment used for disposal of dredge spoils or marine construction materials on land at the slip or dock, at the project site, where the above material/spoils is being handled, and all equipment utilized on breakwall/breakwater structures on the Great Lakes, Islands therein, their connecting and tributary waters, including the Illinois Waterway to the Lock at Lockport, Illinois, the New York State Barge Canal System between Tonawanda, New York and Waterford, New York and Oswego, New York, the Duluth-Superior area to the Fond du Lac Bridge Crossing (Minnesota State Highway 23) on the St. Louis River and on the St. Lawrence River eastward to the International Boundary near St. Regis, New York.

Modification Number Publication Date 0 01/03/2014 1 01/24/2014 2 04/04/2014 3 05/23/2014

* SUIL2003-001 01/01/2014

MECHANICAL DREDGING (CLAMSHELL, DRAGLINE, AND BACKHOE) AND

MARINE CONSTRUCTION):

Rates Fringes

Dredging:

Fireman, Oiler, Deckhand, & Scowman (with dipper, hydraulic or other floating equipment engaged in hydraulic and dipper dredging operations) Pipeline men (both afloat & ashore including loading, unloading, 6/25/2014file:///C:/Users/h6ct9rgb/AppData/Local/Temp/1/Low/3IACI7DD.htm maintaining, and handling pipelines for hydraulic dredges and sandboats Rangeman, Tankerman, Sweepman and service Truck Driver......................$ 22.51 7.61+a+b Lead Deckhand...............$ 29.68 7.61+a+b

Hydraulic Dredging LAUNCH OPERATOR - Vessel 800 Horse- Power Or Less....$ 25.15 7.61+a+b TUG ENGINEER................$ 26.49 7.61+a+b TUG OPERATOR - Vessel Over 800 Horse-Power.............$ 26.49 7.61+a+b TUG WORKERS: Fireman, Lineman, Oiler, Deckhand, Tankerman. Scowman, (on/or with tugboats, launches, or other self-propelled boats)......................$ 22.51 7.61+a+b

MECHANIC (Undefined)

FLOATING EQUIPMENT:

Illinois Class I....................$ 52.45 30.80+b&c Class II-A.................$ 50.95 30.80+b&c Class II-B.................$ 53.95 30.80+b&c Class III..................$ 45.35 30.80+b&c Class IV...................$ 37.70 30.80+b&c FLOATING EQUIPMENT: Indiana Class I....................$ 47.20 26.10+b&c Class II-A.................$ 45.70 26.10+b&c Class II-B.................$ 45.70 26.10+b&c Class III..................$ 40.65 26.10+b&c Class IV...................$ 33.80 26.10+b&c

FLOATING EQUIPMENT:

Michigan Class I....................$ 39.70 25.05+b&c Class II-A.................$ 38.20 25.05+b&c Class II-B.................$ 39.20 25.05+b&c Class III..................$ 34.00 25.05+b&c Class IV...................$ 28.30 25.05+b&c

FLOATING EQUIPMENT:

Minnesota Class I....................$ 39.70 16.70+b&c Class II-A.................$ 38.20 16.70+b&c Class II-B.................$ 38.70 16.70+a&b Class III..................$ 34.00 16.70+b&c Class IV...................$ 28.30 16.70+b&c

FLOATING EQUIPMENT:

New York:(Cattaraugus, Chautauga, Erie and Orleans Counties) Class I....................$ 39.70 27.91+b&c Class II-A.................$ 38.20 27.91+b&c Class II-B.................$ 41.20 27.91+b&c Class III..................$ 34.00 27.91+b&c Class IV...................$ 28.30 27.91+b&c

FLOATING EQUIPMENT:

New York:(Cayuga, Jefferson, Oswego, and St.

Lawrence Counties) Class I....................$ 41.15 23.70+b&c Class II-A.................$ 39.65 23.70+b&c Class II-B.................$ 42.65 23.70+b&c Class III..................$ 35.25 23.70+b+c Class IV...................$ 29.35 23.70+b&c

FLOATING EQUIPMENT:

New York:(Monroe and Wayne Counties and the City of Rochester) Class I....................$ 43.15 23.55+b&c Class II-A.................$ 41.65 23.55+b&c Class II-B.................$ 44.65 23.55+b&c Class III..................$ 37.05 23.55+b&c Class IV...................$ 30.85 23.55+b&c

FLOATING EQUIPMENT:

New York:(Niagara) Class I....................$ 39.70 25.90+b&c Class II-A.................$ 38.20 25.90+b&c Class II-B.................$ 40.20 25.90+b&c Class III..................$ 34.00 25.90+b&c Class IV...................$ 28.30 25.90+b&c

FLOATING EQUIPMENT:

Ohio:(Ashtabula, Cuyahoga, Erie,Lake, and Lorain Counties) Class I....................$ 39.70 13.51+b&c Class II-A.................$ 38.20 13.51+b&c Class II-B.................$ 38.20 13.51+b&c Class III..................$ 34.00 13.51+b&c Class IV...................$ 28.30 13.51+b&c

FLOATING EQUIPMENT:

Ohio:(Lucas, Henry, Ottawa, Wood and Sandusky Counties) Class I....................$ 39.70 13.51+b&c Class II-A.................$ 38.20 13.51+b&c Class II-B.................$ 38.20 13.51+b&c Class III..................$ 34.00 13.51+b+c Class IV...................$ 28.30 13.51+b&c

FLOATING EQUIPMENT:

Pennsylvania:(Erie County):

Class I....................$ 39.70 18.00+b&c Class II-A.................$ 38.20 18.00+b&c Class II-B.................$ 38.20 18.20+a&b Class III..................$ 34.00 18.00+b&c Class IV...................$ 28.30 18.00+b&c

FLOATING EQUIPMENT:

Wisconsin:Includes all marine/floating type work on projects in the

Superior/Duluth Harbor, Lake Superior.

Class I....................$ 43.15 20.18+b&c Class II-A.................$ 41.65 20.18+b&c Class II-B.................$ 42.15 20.18+b&c Class III..................$ 37.10 20.18+b&c Class IV...................$ 30.85 20.18+b&c

PAID HOLIDAYS (WHERE APPLICABLE):

A- NEW YEAR'S DAY

B- MEMORIAL DAY

C- INDEPENDENCE DAY

D- LABOR DAY

E- THANKSGIVING DAY

F- CHRISTMAS DAY

G- PRESIDENT'S DAY

H- VETERAN'S DAY.

FOOTNOTES:

a. $30.10 per day per employee for medical

b. Eight paid holidays: A thru H

c. Hazardous/Toxic Waste Material:

*Level A $2.50 per hour *Level B 2.00 per hour *Level C 1.00 per hour *Level D 0.50 per hour

Such wages shall be above the classifications of work listed under mechanical dredging and Marine construction of this general wage decision. *Working with Hazardous Waste at this level as defined by the U. S. Enviromental Protection Agency.

CLASSIFICATION DESCRIPTIONS

Class I - Master Mechanic - assist and direct Class II, Class III, and Class IV, diver/wet tender, engineer (hydraulic dredge) Class II-A Crane/Backhoe Operator, 70 Ton or over Tug Operator, Mechanic/Welder, assistant engineer(hydraulic dredge), leverman (hydraulic dredge), diver tender Class II-B Friction, Lattice Boom, or any Crane Certifications Class III - Deck Equipment Operator (Machineryman) Maintenance of Crane (over 50 ton capacity) or Backhoe (115,000 pounds or more), Tug/launch operator, Loader/dozer and like equipment on Barge, breakwater wall, slip/dock, Scow, Deck Machinery, etc.

Class IV - Deck Equipment Operator(Machineryman/Fireman) (Four equipment units or more) Off Road Trucks, Deck Hand, Tug Engineer and Crane Maintenance 50 ton capacity and under or Backhoe weighing 115,000 pounds or less, assistant tug operator.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is union or non-union.

Union Identifiers

An identifier enclosed in dotted lines beginning with characters other than "SU" denotes that the union classification and rate have found to be prevailing for that classification. Example: PLUM0198-005 07/01/2011. The first four letters , PLUM, indicate the international union and the four-digit number, 0198, that follows indicates the local union number or district council number where applicable , i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination.

The date, 07/01/2011, following these characters is the effective date of the most current negotiated rate/collective bargaining agreement which would be July 1, 2011 in the above example.

Union prevailing wage rates will be updated to reflect any changes in the collective bargaining agreements governing the rates.

0000/9999: weighted union wage rates will be published annually each January.

Non-Union Identifiers

Classifications listed under an "SU" identifier were derived from survey data by computing average rates and are not union rates; however, the data used in computing these rates may include both union and non-union data. Example: SULA2004-007 5/13/2010. SU indicates the rates are not union majority rates, LA indicates the State of Louisiana; 2004 is the year of the survey; and 007 is an internal number used in producing the wage determination. A 1993 or later date, 5/13/2010, indicates the classifications and rates under that identifier were issued as a General Wage Determination on that date.

Survey wage rates will remain in effect and will not change until a new survey is conducted.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

SECTION 01 22 00.00 10

MEASUREMENT AND PAYMENT

04/06

PART 1 GENERAL

1.3 JOBLUMP SUM PAYMENT ITEMS

Payment items for the work of this contract for which contract joblump sum payments will be made are listed in the BIDDING SCHEDULE and described below. All costs for items of work, which are not specifically mentioned to be included in a particular joblump sum or unit price payment item, shall be included in the listed joblump sum item most closely associated with the work involved. The joblump sum price and payment made for each item listed shall constitute full compensation for furnishing all plant, labor, materials, and equipment, and performing any associated Contractor quality control, environmental protection, meeting safety requirements, tests and reports, and for performing all work required for which separate payment is not otherwise provided.

1.1.1 Mobilization and Demobilization (Bid Items 0001 and Option Bid Item 002119)

1.1.1.1 Payment

Payment at the applicable joblump sum price shall include all costs for mobilization and demobilization of all the Contractor's plant and equipment. Payment constitutes full compensation for all plant, labor, equipment, and incidentals associated with mobilization and demobilization as defined in the special clause payment for mobilization and demobilization.

1.1.1.2 Unit of Measure

Unit of measure: JobLump Sum.

1.1.5 Project and Safety Signs (Bid Item 0002)

1.1.5.1 Payment

Full compensation for all labor, equipment and materials for the placement and movement of project signs, safety signs, warning signs, and other incidental items as described in SECTION 01 58 00 PROJECT SIGNS AND SAFETY SIGNS shall be included in the contract joblump sum price for Bid Item 0002 of the Bid Schedule.

1.1.5.2 Unit of Measure

Unit of measure: JobLump Sum.

1.1.2 Silent Scow Inspector (Bid Item 0003)

1.1.2.1 Payment

Payment will be made at the contract joblump sum price for the payment item "Silent Inspector Implementation," and the price shall constitute full compensation for all labor, equipment, tools, and incidentals necessary to install, operate and maintain the system as specified in Section 35 21 23 NATIONAL DREDGING QUALITY MANAGEMENT (dqm) PROGRAM for the duration of the dredging operations. Fifty (50) percent of the joblump sum bid shall be for furnishing and installing the necessary equipment and fifty (50) percent of the amount bid shall be for operating and maintaining the system. Any down time due to fault of the Contractor or Contractor's equipment will be an amount determined by percentage of time deducted from 50% of the bid amount.

1.1.2.2 Unit of Measurement

Unit of measure: JobLump Sum.

1.1.4 Pre-Survey (Bid Item 0004)

1.1.4.1 Payment

Payment at the applicable joblump sum price shall include all costs for the pre-work topographic survey of the outer harbor disposal site, as required in Section 01 10 00, GENERAL PROVISIONS.

1.1.4.2 Unit of Measure

Unit of measure: JobLump Sum.

1.1.4 Post-Survey (Option Bid Item 001721)

1.1.4.1 Payment

Payment at the applicable joblump sum price shall include all costs for the post-survey of the disposal site, as required in Section 01 10 00, GENERAL

PROVISIONS.

1.1.4.2 Unit of Measure

Unit of measure: JobLump Sum.

1.1.3 Water Quality Monitoring (Bid Item 0009AC11)

1.1.3.1 Payment

Payment at the applicable joblump sum price shall include costs for sampling, analyzing, and reporting for water quality monitoring in the approach channel, as required in Section 35 21 00, WATER QUALITY MONITORING

FOR APPROACH CHANNEL DREDGING.

1.1.3.2 Measurement

Unit of Measure: JobLump Sum.

1.1.4 Sediment Sampling (Bid Item 0009AD12)

1.1.4.1 Payment

Payment at the applicable joblump sum price shall include costs for sampling, analyzing, and reporting for sediment sampling in the approach channel, as required in Section 01 35 45, SEDIMENT SAMPLING FOR APPROACH

CHANNEL.

1.1.4.2 Measurement

Unit of Measure: JobLump Sum.

1.1.14 Removal of Jersey Barriers, Seeding and Stabilizing of Dredged Material in Place (Bid Item 0008)

1.1.14.1 Payment

Payment will include full compenstation for all plant, labor and materials necessary for removal of jersey barriers from site, and stabilizing and seeding outer harbor dredged material in place, in accordance with 35 25 00

TRANSPORTATION AND DISPOSAL OF DREDGED MATERIAL.

1.1.14.1.1 Unit of Measure

Unit of Measure: JobLump Sum.

1.1.14 Site Grading, Stabilization and Well Raising for 80,000 CY Dredged Material (Option Bid Item 00195)

1.1.14.1 Payment

Payment will include full compenstation for all plant, labor and materials necessary for grading 80,000 CY outer harbor dredged material accross entire disposal site, seeding and stabilizing material, and raising all monitoring wells to new grade height, in accordance with 35 25 00

TRANSPORTATION AND DISPOSAL OF DREDGED MATERIAL.

1.1.14.1.1 Unit of Measure

Unit of Measure: JobLump sum.

1.1.14 Site Grading and Stabilization for 20,000 CY Dredged Material (Option Bid Item 002016)

1.1.14.1 Payment

Payment will include full compenstation for all plant, labor and materials necessary for grading 20,000 CY outer harbor dredged material accross entire disposal site, and seeding and stabilizing material, in accordance with 35 25 00 TRANSPORTATION AND DISPOSAL OF DREDGED MATERIAL.

1.1.14.1.1 Unit of Measure

Unit of Measure: JobLump sum.

1.1.7 Performance and Payment Bonds (Bid Items 00151 and Option Items 00162, 002318 and 003020)

1.1.7.1 Payment

Payment will be made for the performance and payment bonds that are required as part of this contract. The Government will pay either the actual cost of the Performance and Payment Bonds or the Contractor's bid price, whichever is less. Costs associated with this item shall be included in the joblump sum contract price. Payment for the performance and payment bonds under each option shall only cover the cost required to perform the work within that option.

1.1.7.2 Unit of Measurement

Unit of measure: JobLump sum.

1.4 UNIT PRICE PAYMENT ITEMS

Payment items for the work of this contract on which the contract unit price payments will be made are listed in the BIDDING SCHEDULE and described below. The unit price and payment made for each item listed shall constitute full compensation for furnishing all plant, labor, materials, and equipment, and performing any associated Contractor quality control, environmental protection, meeting safety requirements, tests and reports, and for performing all work required for each of the unit price items.

1.1.7 Transportation of Approach Channel Dredged Material to Optional Placement Area 2 (Option Bid Item 00183)

1.1.7.1 Payment

Full compensation for all labor, equipment, and materials for the transportation of Approach Channel dredged material to Placement area 2, as shown in the contract drawings and in accordance with 35 25 00 TRANSPORTATION AND DISPOSAL OF DREDGED MATERIAL, shall be paid at the contract unit price.

1.1.7.2 Unit of Measurement

Cubic Yard (CY)

1.1.8 Transportation of Additional Approach Channel Dredged Material to Optional Placement Area 2 (Option Bid Item 00174)

1.1.8.1 Payment

Full compensation for all labor, equipment, and materials for the transportation of Approach Channel dredged material OVER the first 75,000 CY to Placement area 2, as shown in the contract drawings and in accordance with 35 25 00 TRANSPORTATION AND DISPOSAL OF DREDGED MATERIAL, shall be paid at the contract unit price.

1.1.8.2 Unit of Measurement

Cubic Yards(CY)

1.1.10 Silt Fence (Bid Item 0007)

1.1.10.1 Payment

Payment will be made at the contract unit price and includes full compensation for all plant, labor, and materials necessary for work in accordance with 01 57 21 ENVIRONMENTAL PROTECTION FOR OUTER HARBOR DREDGING.

1.1.10.2 Unit of Measure

Unit of measure: Lineal Feet (LF)

1.1.12 Jersey Barriers (Bid Item 0006)

1.1.12.1 Payment

Payment will be made at the contract unit price and includes full compensation for all plant, labor, and materials necessary for work in accordance with 35 25 00 TRANSPORTATION AND DISPOSAL OF DREDGED MATERIAL.

1.1.12.2 Unit of Measure

Unit of measure: Lineal Feet (LF)

1.4.1 Maintenance Dredging and Disposal at Placement Area 1 for Approach Channel Dredging (Bid Items 0009AA, and Option Bid Items 0009AB10, 00240, 0025 1, 00262, 00273, 00284, 00295)

1.4.1.1 Payment

Payment for dredging, handling and disposal of dredged materials in Placement area 1 will be made at the contract unit price per cubic yard as described in Section 35 20 23 MECHANICAL DREDGING. Existing conditions shown on the drawings indicate conditions at the time of survey. Actual conditions may vary. Monthly partial payments will be based on approximate quantities determined by the progress payment quantity surveys taken by the Contractor or other means acceptable to the COR. All survey shall be performed in accordance to Section 35 20 23 MECHANICAL DREDGING, paragraph "Measurement".

As of the time of contract award, the Government is in the process of procuring new permits for dredging in the Federal Navigation Approach Channel in 2015. It is not known when those permits will be obtained. No dredging work in the Approach Channel or Advanced Maintenance area is allowed until after those permits have been obtained, which will determine the award of the Approach channel optional bid items. All conditions associated with those permits must be adhered to for any 2015 Approach Channel dredging, including but not limited to sediment sampling, sediment and elutriate analyses, and water quality monitoring if required by the Illinois Environmental Protection Agency as part of the permit.

1.4.1.2 Measurement

The Contractor shall, in the presence of the COR, take soundings after dredging to confirm that the proposed dredging depths have been completed.

The program and methods for calculating quantities must be submitted in the dredging operation plans and approved by the COR prior to pre-dredging survey by the Contractor.

(a) Method of Measurement. The total amount of materials removed and to be paid for under the contract will be measured by the cubic yard in place by computing, within the limits of the allowances and tolerances the volume between the bottom surfaces shown by the prior and after survey soundings. The "after dredging survey" shall be made as soon as practicable after the work specified has been completed. Results of soundings by an approved method will be the basis for payment. Once the post-dredge soundings have confirmed that the proposed depths have been reached, the Contractor and the Government shall agree on an estimated percent of completion based upon plan quantities and surface area completed.

(b) Survey Prior and During Progress of Work. The contract drawings are believed to represent accurately the conditions existing at the time of survey, however, all soundings of the proposed dredging areas shown on the drawings shall be verified and corrected by a "prior dredging survey" consisting of soundings taken before dredging occurs. Contract depth will be determine by soundings or sweeping taken behind the dredge as work progresses. The Contractor shall take progress soundings or sweepings in the presence of the COR. The measurement and computation of payable quantities within the allowances and tolerances described in this section after having once been made, will not be reopened, except on evidence of collusion, fraud, or obvious error.

(c) Excessive Dredging. Material taken from beyond the limits specified in paragraphs "Allowable Dredging Prism" and "Side Slope" of Section 35 20 23 MECHANICAL DREDGING, will be deducted as excessive channel or sideslope dredging, from the total amount dredged for which payment will not be made. The final determination of the amounts of excessive dredging will be based wholly on the surveys made for final examination and acceptance. See paragraph, "Final Examination and Acceptance", of Section 35 20 23 DREDGING.

(d) Pre, Post and Progress Payment Quantity Surveys shall be performed in accordance with Section 35 20 23 MECHANICAL DREDGING. Additional soundings will be taken as the COR may deem necessary.

(e) Monthly Estimate. Monthly estimates of work completed will be based on the result of soundings taken during the progress of the work based on an estimated percent of completion. Deductions will be made for dredging and disposal not in accordance with the specifications.

1.4.1.3 Unit of Measure

Unit of measure: cubic yard (CY)

1.4.2 Maintenance Dredging and Disposal for Outer Harbor Dredging (Bid Items 0010AA 3 and 0010AB4)

1.4.2.1 Payment

Payment for dredging, handling and disposal of dredged materials will be made at the contract unit price per cubic yard as described in Section 35 20 23 MECHANICAL DREDGING. Existing conditions shown on the drawings indicate conditions at the time of survey. Actual conditions may vary.

Monthly partial payments will be based on approximate quantities determined by the progress payment quantity surveys taken by the Contractor or other means acceptable to the COR. All survey shall be performed in accordance to Section 35 20 23 MECHANICAL DREDGING, paragraph "Measurement".

1.4.2.2 Measurement

The Contractor shall, in the presence of the COR, take soundings after dredging to confirm that the proposed dredging depths have been completed.

The program and methods for calculating quantities must be submitted in the dredging operation plans and approved by the COR prior to pre-dredging survey by the Contractor.

(a) Method of Measurement. The total amount of materials removed and to be paid for under the contract will be measured by the cubic yard in place by computing, within the limits of the allowances and tolerances the volume between the bottom surfaces shown by the prior and after survey soundings. The "after dredging survey" shall be made as soon as practicable after the work specified has been completed. Results of soundings by an approved method will be the basis for payment. Once the post-dredge soundings have confirmed that the proposed depths have been reached, the Contractor and the Government shall agree on an estimated percent of completion based upon plan quantities and surface area completed.

(b) Survey Prior and During Progress of Work. The contract drawings are believed to represent accurately the conditions existing at the time of survey, however, all soundings of the proposed dredging areas shown on the drawings shall be verified and corrected by a "prior dredging survey" consisting of soundings taken before dredging occurs. Contract depth will be determine by soundings or sweeping taken behind the dredge as work progresses. The Contractor shall take progress soundings or sweepings in the presence of the COR. The measurement and computation of payable quantities within the allowances and tolerances described in this section after having once been made, will not be reopened, except on evidence of collusion, fraud, or obvious error.

(c) Excessive Dredging. Material taken from beyond the limits specified in paragraphs "Allowable Dredging Prism" and "Side Slope" of Section 35 20 23 DREDGING, will be deducted as excessive channel or sideslope dredging, from the total amount dredged for which payment will not be made. The final determination of the amounts of excessive dredging will be based wholly on the surveys made for final examination and acceptance. See paragraph, "Final Examination and Acceptance", of Section 35 20 23 MECHANICAL DREDGING.

(d) Pre, Post and Progress Payment Quantity Surveys shall be performed in accordance with Section 35 20 23 MECHANICAL DREDGING. Additional soundings will be taken as the COR may deem necessary.

(e) Monthly Estimate. Monthly estimates of work completed will be based on the result of soundings taken during the progress of the work based on an estimated percent of completion. Deductions will be made for dredging and disposal not in accordance with the specifications.

1.2.3 Monitoring Well Removal and Reinstallation (Bid Item 0005)

1.2.3.1 Payment

Payment will be made at the contract unit price for each monitoring well removed and reinstalled in accordance with 33 24 13 GROUNDWATER MONITORING

WELLS.

1.2.3.1.1 Measurement

Unit of Measure: Each (EA).

PART 2 PRODUCTS (Not Applicable)

PART 3 EXECUTION (Not Applicable)

-- End of Section --

SECTION 01 57 21

ENVIRONMENTAL PROTECTION FOR OUTER HARBOR DREDGING

08/13

PART 1 GENERAL

1.1 REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by basic designation only.

U.S. ARMY CORPS OF ENGINEERS (USACE)

EM 385-1-1 (2008; Errata 1-2010; Changes 1-3 2010;

Changes 4-6 2011; Change 7 2012) Safety and Health Requirements Manual

WETLAND MANUAL Corps of Engineers Wetlands Delineation Manual Technical Report Y-87-1

U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)

33 CFR 328 Definitions of Waters of the United States

40 CFR 261 Identification and Listing of Hazardous Waste

40 CFR 262 Standards Applicable to Generators of Hazardous Waste

40 CFR 279 Standards for the Management of Used Oil

40 CFR 302 Designation, Reportable Quantities, and Notification

40 CFR 355 Emergency Planning and Notification

40 CFR 68 Chemical Accident Prevention Provisions

49 CFR 171 - 178 Hazardous Materials Regulations

ASSOCIATION OF ILLINOIS SOIL AND WATER CONSERVATION DISTRICTS

(AISWCD)

IUM (2013) Illinois Urban Manual

ILLINOIS ENVIRONMENTAL PROTECTION AGENCY (IEPA)

35 IAC 900-901 Title 35 of Illinois Administrative Code, Subtitle H: Noise, Chapter I: Pollution Control Board

415 ILCS 5/3.160 Environmental Protection Act, Construction or demolition debris

415 ILCS 5/22.51 Environmental Protection Act, Clean Construction or Demolition Debris Fill Operations

415 ILCS 5/22.51a Environmental Protection Act, Uncontaminated Soil Fill Operations

415 ILCS 5/22.51b Environmental Protection Act, Fees for Permitted Facilities Accepting Clean Construction or Demolition Debris or Uncontaminated Soil

415 ILCS 5/31.1 Environmental Protection Act, Administrative Citation

415 ILCS 5/42 Environmental Protection Act, Civil Penalties

1.2 DEFINITIONS

1.2.1 Environmental Pollution and Damage

Environmental pollution and damage is the presence of chemical, physical, or biological elements or agents which adversely affect human health or welfare; unfavorably alter ecological balances of importance to human life;

affect other species of importance to humankind; or degrade the environment aesthetically, culturally and/or historically.

1.2.2 Environmental Protection

Environmental protection is the prevention/control of pollution and habitat disruption that may occur to the environment during construction. The control of environmental pollution and damage requires consideration of land, water, and air; biological and cultural resources; and includes management of visual aesthetics; noise; solid, chemical, gaseous, and liquid waste; radiant energy and radioactive material as well as other pollutants.

1.2.3 Contractor Generated Hazardous Waste

Contractor generated hazardous waste means materials that, if abandoned or disposed of, may meet the definition of a hazardous waste. These waste streams would typically consist of material brought on site by the Contractor to execute work, but are not fully consumed during the course of construction. Examples include, but are not limited to, excess paint thinners (for example, methyl ethyl ketone and toluene), waste thinners, excess paints, excess solvents, waste solvents, excess pesticides, and contaminated pesticide equipment rinse water.

1.2.4 Clean Construction and Demolition Debris (CCDD)

As defined by the Illinois Environmental Protection Agency, CCDD is uncontaminated broken concrete without protruding metal bars, bricks, rock, stone, or reclaimed asphalt pavement generated from construction or demolition activities. When uncontaminated soil is mixed with any of these materials, the uncontaminated soil is considered CCDD.

1.2.5 Hazardous Waste

Wastes designated by the U.S. Environmental Protection Agency as hazardous, as defined in 40 CFR 261.

1.2.6 Land Application for Discharge Water

The term "Land Application" for discharge water implies that the Contractor shall discharge water at a rate which allows the water to percolate into the soil. No sheeting action, soil erosion, discharge into storm sewers, discharge into defined drainage areas, or discharge into the "waters of the United States" shall occur. Land application shall be in compliance with all applicable Federal, State, and local laws and regulations.

1.2.7 Surface Discharge

The term "Surface Discharge" implies that the water is discharged with possible sheeting action and subsequent soil erosion may occur. Waters that are surface discharged may terminate in drainage ditches, storm sewers, creeks, and/or "waters of the United States" and would require a permit to discharge water from the governing agency. All projects with land disturbances greater than or equal to one acre in total area must have a National Pollution Discharge Elimination System (NPDES)Construction Site Activity Storm Water Permit to discharge surface water from a construction site, issued by the Illinois Environmental Protection Agency. All projects with discharge of dredged or fill material to waters of the United States must have a Section 401 Water Quality Permit issued by the Illinois Environmental Protection Agency.

1.2.9 Waters of the United States

All waters which are under the jurisdiction of the Clean Water Act, as defined in 33 CFR 328.

1.2.10 Wetlands

Wetlands means those areas that are inundated or saturated by surface or ground water at a frequency and duration sufficient to support, and that under normal circumstances do support, a prevalence of vegetation typically adapted for life in saturated soil conditions. Wetlands generally include swamps, marshes, and bogs. Official determination of whether or not an area is classified as a wetland must be done in accordance with

WETLAND MANUAL.

1.3 GENERAL REQUIREMENTS

The Contractor shall minimize environmental pollution and damage that may occur as the result of construction operations. The environmental resources within the project boundaries and those affected outside the limits of permanent work shall be protected during the entire duration of this contract. The Contractor shall comply with all applicable environmental Federal, State, and local laws and regulations. The Contractor shall be responsible for any delays resulting from failure to comply with environmental laws and regulations.

1.4 SUBCONTRACTORS

The Contractor shall ensure compliance with this section by subcontractors.

1.5 PAYMENT

No separate payment will be made for work covered under this section. The Contractor shall be responsible for payment of fees associated with environmental permits, application, and/or notices obtained by the Contractor. All costs associated with this section shall be included in the contract price. The Contractor shall be responsible for payment of all fines/fees for violation or non-compliance with Federal, State, Regional and local laws and regulations.

1.6 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for information only. When used, a designation following the "G" designation identifies the office that will review the submittal for the Government.