Question and answers from contractor.pdf
PDF 123 KB Posted
- Attached to
- Coordinate Measuring Machine (CMM) Federal contract opportunity
- Solicitation number
- W912NW24q0017
About this file
This document contains questions from a contractor and answers from the agency regarding a federal solicitation for a Coordinate Measuring Machine (CMM). The solicitation seeks a CMM with a 700x900x500mm size and allows for third party modular fixture plates and accessory kits. Training requirements include onsite software training for Calypso Basic through Gear Pro options for two to four days each, and onsite hardware training for a Calypso Rotary Table for two days. The solicitation number is W912NW24q0017 from the Department of the Army Materiel Command Contracting Command at Redstone Arsenal.
View the file
Other files for this federal contract opportunity
Show all 13
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Question from contractor:
Question 1:
Equipment Requirements:
The machine size 700x900x500mm is smaller than the existing systems in the machine shop Bldg.
1700.2, wondering are we quoting the correct size machine?
Answer 1: See Amendment 0003 Attached SOW (Statement of Work) 3.2 (Equipment Requirements) for highlighted changes.
Question 2:
All the existing Zeiss CMM’s on base utilize a fixture system that is not a Zeiss product, if you would like to continue using the same products I can recommend a third party supplier.
o Modular Fixture Plate (ex: 28” x 28” x 0.75”) with 1” x 1” Grid Pattern.
o Accessories Kit with Standoffs & Hold Downs for Modular Fixture Plate
Answer 2: See Amendment 0003 Attached SOW (Statement of Work) 3.2 (Equipment Requirements) for highlighted changes.
Question 3:
3.6 Training Requirements: do not outline the need for Software and machine Hardware.
• Software Training for software optioins o Calypso Basic – onsite for 4 days o Calypso Advanced – onsite for 4 days o Calypso Curve – onsite for 3 days o Calypso Free Form – onsite for 2 days o Calypso Gear Pro Involute & Bevel – onsite for 4 days o Calypso PCM – onsite for 4 days
• Hardware options included o Calypso Rotary Table – onsite for 2 days
Question 3:
See Amendment 0003 Attached SOW (Statement of Work) 3.6 (Training Requirement) for highlighted changes.
File details come from the government source that posted it. Updated .