Requirements.pdf

This document is a specification sheet for storage and containment equipment to be installed across multiple locations within a facility. The equipment is organized by location and includes detailed dimensional and material specifications for each item.

The Upstairs Left area requires caging (17' width x 15'6" to 14'2" sloped height with 6' sliding gate) constructed from 2" x 2" posts and 10 gauge, 2" x 1" woven wire mesh, plus four duffel bag locker units (48"W x 30"D x 90"H, five lockers per unit) fabricated from 2-gauge steel bases with 6-gauge sides, ends, and lids, each with 200-pound capacity. The Upstairs Right area specifies two-sided caging (29"W x 17'L with heights ranging from 13'4" to 15'10" with sloped configuration) with matching construction specifications, supplemented by ten MiniRack units in varying dimensions (six units at 72"L x 30"W x 87"H, two at 96"L x 30"W x 87"H, and two at 96"L x 48"W x 87"H), each with five beam levels featuring 1,200-pound capacity per level and steel decking. The Ground Level area requires forty fully-framed, all-welded lockers (18"W x 22"D x 72"H) with welded 4" bases, delivered fully assembled in pairs, featuring ventilated doors with padlock hasps, single-prong hooks, stainless steel coat rods, and ventilated bottom shelves with expanded metal sides. All locations require gray-colored equipment. The document indicates recent modifications highlighted in red, specifically affecting the Upstairs Left caging specifications.