FINAL_Combined_Solicitation_CFMO_Furniture.pdf

CFMO FURNITURE

PR 10808117

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. Proposals are being solicited and this announcement constitutes the only solicitation. Solicitation number W912L7-16-T-0001 is hereby issued as a Request for Proposal. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-86. This requirement is being advertised as a 100% small business set-aside; the North American Industry Classification System (NAICS) Code is 337214 with a Small Business Size Standard of 500 Employees. All responsible sources may submit an offer, which shall be considered by this Agency. The following clauses are applicable to this acquisition: FAR 52.212-1 Instructions to Offerors-Commercial Items, FAR 52-212-2 Evaluation Commercial Items, FAR 52-212-3, Online Reps and Certifications, FAR 52.212-4 Contract Terms and Conditions-Commercial Items, FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Items, FAR 52.225-1 Buy America Act Supplies, and 52.211-6, Brand Name or Equal. FAR 52-219-6 Notice of Total Small Business Set-Aside

FAR 52.212-2 - Evaluation Factors

(a) Technical capability of the item offered to meet the Government requirement

(b) Price

Proposals are due in this office no later than 02 MARCH, 2016, 3:30 PM Central Time.

Email Proposals to Rhonda.m.lien.civ@mail.mil and MAJ Adam Sanchez @ adam.w.sanchez.mil@mail.mil Point of Contact referencing this solicitation is Rhonda Lien at 615-313-0530. See solicitation for salient characteristics and evaluation factors.

Provide Dun and Bradstreet number, Tax Identification number, and Cage code with proposal. When submitting Proposal, the FINAL PRICE must be the ONLY price on the proposal. Please include all discounts (if any) with the final price. Your proposal will be sent back if you have more than one price listed.

NO PHONE CALLS FOR QUESTIONS, PLEASE EMAIL ALL QUESTIONS TO

rhonda.m.lien.civ@mail.mil – I will post all Q&A’s on FBO once answered. Questions must be submitted by 24 FEB 2016 @ 2:00PM CST.

COLOR PALATE

Color Palate will be chosen by contracting officer. Supply all colors that items are available in for final decision at site visit.

mailto:Rhonda.m.lien.civ@mail.mil mailto:adam.w.sanchez.mil@mail.mil mailto:rhonda.m.lien.civ@mail.mil

SITE VISIT

Site visit will on February 19, 2016 at 2:00PM Central Standard Time.

Email list of attendees to rhonda.m.lien.civ@mail.mil Access must be on confirmed list.

Driver must have insurance, registration, driver’s license; all other parties must have identification.

DELIVERY & INSTALLATION

3041 Sidco Drive Nashville, TN 37204

Installation Must be Included in PROPOSAL

Enclosures:

Request for Proposal (RFP) Salient Characteristics Floor Plan

Rhonda Lien - POC rhonda.m.lien.civ@mail.mil

1 D-shaped Peninsula Work Surface w/ Modesty corner desk unit Classic Linen 2 FTS35.3060LF -$ -$

2 D-shaped Peninsula Work Surface w/ Modesty corner desk unit Classic Linen 1 FTS35.2454LD -$ -$ 3 Articulating Keyboard Holder key board holder 20¼"W x 10½"D x 1"H on an 18" track 3 Y7724.BL -$ -$ 4 Rectangular work surface Work Surface Classic Linen 3 FTS10.2448LF -$ -$ 5 Rectangular work surface Work Surface Classic Linen 1 FTS10.2472LF -$ -$ 6 Rectangular work surface Work Surface Classic Linen 1 FTS10.2484LF -$ -$ 7 Rectangular work surface Work Surface Classic Linen 1 FTS10.2496LF -$ -$ 8 Rectangular transaction Classic Linen 1 FT280.72LP -$ -$ 9 3 Drawer Free Standing Storage Pedestal Storage 91 WHITE 4 LW100.20BBF -$ -$ 10 2-Drawer Free Standing Storage Pedestal Storage 91 WHITE 4 LW100.20FF -$ -$ 11 Overhead storage unit Storage 91 WHITE 4 FT420.48PL -$ -$ 12 Angled Shelf Divider TBD 4 -$ -$ 13 Paper tray TBD 4 -$ -$ 14 coat hook TBD 12 -$ -$ 15 Task Light 4 G6136.42S -$ -$ 16 Sliding Door Panel WN, FW 2 FT118.6836AL6NFA -$ -$ 17 Paper Management Rail WN 4 -$ -$ 18 Partition Wall Panels Panel WN 2 FT110.3524J -$ -$ 19 Partition Wall Panels Panel WN 2 FT110.3530J -$ -$ 20 Partition Wall Panels Panel WN 1 FT110.3542J -$ -$ 21 Partition Wall Panels Panel WN 4 FT110.3548J -$ -$ 22 Partition Wall Panels Panel WN 2 FT110.4236N -$ -$ 23 Partition Wall Panels Panel WN 2 FT110.6824N -$ -$ 24 Partition Wall Panels Panel WN 18 FT110.6836J -$ -$ 25 Partition Wall Panels Panel WN 19 FT110.6848J -$ -$ 26 Power and Data Harness 21 FT150. -$ -$

SUBTOTAL -$

30" W x 60"D x 29½"H

24" W x 54"D x 29½"H

48"W x 24"D 72"W x24"D

72"W x 14"D 96"W x24"D 84"W x24"D

36"W x 3"D x68"H

15"W x 20"D x 28"H 15"W x 28"D x 28"H

48"W x 16"D

131/4"wx2"h

COMPONENT DIMENSION COLOR QTY.

48"W x 3"D x68"H

68"H x 36"W

6"HX30"W

24"W x 3"D x35"H 30"W x 3"D x35"H 42"W x 3"DX35"H 48"W x 3"D x35"H 36"W x 3"D x42"H 24"W x 3"D x68"H

Model # Price EA Total PriceITEM No. DESCRIPTION CUBICLE COMPONENTS

Rhonda Lien - POC rhonda.m.lien.civ@mail.mil

DESK FURNITURE COMPONENT COLOR QTY. Model # Price EA Total Price

27 L-Shaped Desk and Return w/BBF&FF files Desk With Drawers 72"W x 78"D x 30"H Cherry 3

PKH3672DR &

PKH2442R2L -$ -$

U-Shaped Desk, Bridge, and Credenza w/BBF&FF files Desk With Drawers 72"W x 96"D x 30"H Cherry 2

PKH3072DL,

PKH2442BM, &

PKH2472C2R -$ -$

U-Shaped Bowed Executive Desk, Bridge, and Credenza w/BBF&FF files Desk With Drawers 72"W x 102"D x 30"H Cherry 1

PKH3672BDR,

PKH2442BM, &

PKH2472C2L -$ -$

30 Upper Bookcase w/Tackboard Cherry 3

P-US1672SUB-V &

P-AT1672UB-TB -$ -$

31 Credenza with Storage Cabinets Cherry 1

P-KM2472RWS-V &

P-KM2436SS-V -$ -$

32 Hutch Cherry 1 P-US1672SUB-V -$ -$

33 L-Shaped Bowed Executive Desk and Return w/BBF&FF Desk With Drawers Cherry 3

PKH3672BDL &

PKH2442R2R -$ -$

34 Round Conference Table Cherry 1

P-KT4848TT-H &

P-TL4400TB -$ -$

35 Wardrobe Cabinet Cherry 3 PKL2418SWCL -$ -$

36 Boat Conference Table Cherry 1

P-KT14448BT-V &

P-XO1018RB-V -$ -$

37 Bowed Conference Table Cherry 3

P-KT3672BT-H &

P-XO1018RB-L -$ -$

38 Free-Standing Movable Partition TBD 4 LW-45-FH-PC -$ -$ 39 Folding/Nesting MetalTraining Table with modesty and rollers TBD 27 DT5AS.2472LT -$ -$ 40 4 Leg Upholstered Side Chair Chair Black 95 5224 -$ -$ 41 High-Back Rolling Desk Chair Chair, rollers Black 4 2223.B1.F.A128 -$ -$ 42 Mid-back Rolling Desk Chair Chair, rollers Black 32 2222.B1.F.A128 -$ -$ 43 4-Drawer Vertical File Cabinet Cream 7 26-401 -$ -$ 44 Metal Storage Table with Sliding Doors TBD 1 -$ -$ 45 Metal Storage Cabinet TBD 2 9336P-S72L -$ -$ 46 Metal 4-Drawer Lateral Storage Cabinet TBD 4 1936P-4F12 -$ -$ 47 Tackboard 3 858N -$ -$ 48 Dry Ease White Board White 5 LCS2048R -$ -$ 49 Round 7 Gal cap.Plastic Trashcan TBD 55 -$ -$

SUBTOTAL $0.00

MISC EXPENSES

50 CUBICLE/FURNITURE DELIVERY 1 -$ -$

51 CUBICLE/FURNITURE INSTALLATION 1 -$ -$

SUBTOTAL -$

GRAND TOTAL -$

DIMENSION

16"x72"x42"H

72"Lx24"Dx29"H 16"x72"x42"H

72"W x 78"D x 30"H

48"Dx 30"H 24"Wx18"Dx 71"H

48"Wx144"Lx30"H

36"Wx72"L 48"Wx78"H

72"Lx24"Wx30"H 24"Wx25"Dx36"H

26"W x 25"D x 44"H 15"Wx27'Dx52"H 60L"x30W"x30"H 36"Wx18"Dx72"H 36'Lx20"Dx52"H

48"Hx96"W 48"Hx96"W

IG & FIN DET FURNITURE & PARTITION

DESCRIPTION

1. CUBICLE COMPONENTS

1A. D-SHAPED PENINSULA WORK SURFACE

Solicitation Item 0001 (applies to Room 229)

• 1 1/8” thick, 45-pound density particleboard with a high-pressure laminate surface top with rigid polyvinyl chloride edges.

• Steel spacers and brackets shall be screwed to adjoining work surface panels (as required by partition manufacturer).

• Floor supported work surface shall have metal Column to support unsecured peninsula end.

• Peninsula shall include half-height mesh fabric modesty attached to bottom of work surface

• Acceptable nominal dimensions:

Width: 30” Depth: 60”

1B. D-SHAPED PENINSULA WORK SURFACE

Solicitation Item 0002 (applies to Room 229)

• 1 1/8” thick, 45-pound density particleboard with a high-pressure laminate surface top with rigid polyvinyl chloride edges.

• Steel spacers and brackets shall be screwed to adjoining work surface panels (as required by partition manufacturer).

• Floor supported work surface shall have metal Column to support unsecured peninsula end.

• Peninsula shall include half-height mesh fabric modesty attached to bottom of work surface

• Acceptable nominal dimensions:

Width: 24” Depth: 54”

1C. ARTICULATING KEYBOARD HOLDER

Solicitation Item 0003(applies to Room 229)

• Support mounted under concave corner surface with screws.

• Support has separate track and keyboard platform.

• Support adjusts upward or downward without requiring knobs or levers.

• Support allows for tilt adjustment.

• Support glide track slides platform without binding or jamming.

• Injection molded keyboard platform is concave shaped fitting into the contour of the concave corner work surface.

• Keyboard is mounted to support with screws.

• Keyboard is 5/8” deep with laminate finish and routed edges.

1D. RECTANGULAR WORK SURFACE

Solicitation Item 0004(applies to Room 229)

• 1 1/8” minimum thickness, 45-pound density particleboard with a high-pressure laminate surface top with rigid polyvinyl chloride edges.

• Steel spacers and brackets shall be screwed to partition panels at end and center (if required by partition manufacturer).

• Work surface shall be secured to spacers with screws and pins.

• Work surface assembly shall have a 5/8 inch gap minimum at the back of the surface to allow cord and plug passage.

Length: 48”

1E. RECTANGULAR WORK SURFACE

Solicitation Item 0005(applies to Room 229)

• Steel spacers and brackets shall be screwed to partition panels at end and center (if required by partition manufacturer).

• Work surface shall be secured to spacers with screws and pins.

• Work surface assembly shall have a 5/8 inch gap minimum at the back

Length: 72”

1F. RECTANGULAR WORK SURFACE

Solicitation Item 0006(applies to Room 229)

• Steel spacers and brackets shall be screwed to partition panels at end and center (if required by partition manufacturer).

• Work surface shall be secured to spacers with screws and pins.

• Work surface assembly shall have a 5/8 inch gap minimum at the back

Length: 84”

1G. RECTANGULAR WORK SURFACE

Solicitation Item 0007(applies to Room 229)

• Steel spacers and brackets shall be screwed to partition panels at end and center (if required by partition manufacturer).

• Work surface shall be secured to spacers with screws and pins.

• Work surface assembly shall have a 5/8 inch gap minimum at the back

Length: 96”

1H. RECTANGULAR TRANSACTION TOP

Solicitation Item 0008(applies to Room 229)

• 1 1/8” minimum thickness, 45-pound density particleboard with fabric front surface.

• High-pressure laminate surface.

• Transaction top shall be secured to counter surface with screws, plates and pins as required by manufacturer.

Width: 9” Length: 72”

1I. 3 DRAWER FREESTANDING STORAGE PEDESTAL

Solicitation Item 0009(applies to Room 229)

• Factory assembled, primed and painted.

• Free standing metal top and shell pedestal.

• Metal file drawer face shall match shell.

• Pedestal shall comprise of 2 box-type drawers and 1-file type drawer.

• Each pedestal shall include factory installed locking mechanism.

• Built-in bevel pull along width of file drawer face.

• Pedestal edges shall be square

• File drawers shall be full-extension.

• Pull drawers shall include steel ball-bearing slides with adjustable glides.

• Pedestal frame shall include necessary crossbars to ensure strength and rigidity.

• Acceptable nominal dimensions:

Width: 15” Height: 28” Depth: 20”

1J. 2 DRAWER FREESTANDING STORAGE PEDESTAL

Solicitation Item 0010(applies to Room 229)

• Free standing metal top and shell pedestal.

• Metal file drawer face shall match shell.

• Pedestal shall comprise of 2 file-type drawers.

• Each pedestal shall include factory installed locking mechanism.

• Built-in bevel pull along width of file drawer face.

• Pedestal edges shall be square

• File drawers shall be full-extension.

• Pull drawers shall include steel ball-bearing slides with adjustable glides.

• Pedestal frame shall include necessary crossbars to ensure strength and rigidity.

• Acceptable nominal dimensions:

Width: 15” Height: 28”

1K. OVERHEAD STORAGE UNIT

Solicitation Item 0011(applies to Room 229)

• Factory assembled and paint finished curved storage unit mounted above work surface.

• Cold rolled steel top and shelf surface.

• Phenolic resin core laminated on each side and lacquer finish on exposed ends.

• Flipper door shall be cold-rolled sheet steel and factory paint finished.

• Flipper door operating mechanism shall move door upward and over the top of shelf.

• Operating mechanism shall be 2-cold rolled steel pivoting door arms with pneumatic cylinder.

• Cold-rolled steel cover shall protect door arms.

• Additional brackets, mounting brackets, clips and gears as required to allow door movement without binding or jamming.

• Hardware shall include a locking mechanism

• Acceptable nominal dimensions:

Width: 48” Depth: 16”.

1L. ANGLED SHELF DIVIDER

Solicitation Item 0012(applies to Room 229)

• Hangs over tool bar.

• Minimum shelf width: 12”.

• Plastic tray has 3 angled slots.

• Each angled slot has loose divider to allow right or left handed activity.

1M. PAPER TRAY

Solicitation Item 0013(applies to Room 229)

• Hangs over tool bar.

• Plastic tray has 4 integrated feet on the bottom to allow for free standing or stacking.

• Each angled slot has loose divider to allow right or left handed activity.

Width: 10” Length: 12” Depth: 3”

1N. COAT HOOK

Solicitation Item 0014(applies to Room 229)

• Factory primed and finished.

• Two hooks per cubicle. Work stations do not receive hooks.

• Hangs over frame or stacking frame.

• Supported by top frame cap.

• Acceptable nominal dimensions:

Width: 4” Depth: 3”

1O. TASK LIGHT

Solicitation Item 0015(applies to Room 229)

• Mounted under flipper storage unit with metal hangers.

• Normal power- factor electronic ballast.

• T5 lamp with a 3500 degree Kelvin color temperature.

• K-25 batwing lens.

• UL listed assembly.

• 42” minimum length power cord.

• Slim profile frame.

• On/Off switch.

1P. SLIDING DOOR PANEL

Solicitation Item 0016(applies to Room 229)

• Factory primed and finished metal frame.

• Sliding door frame shall be 2 inches minimum depth.

• Sliding door frame shall enclose frosted plexiglass for privacy.

• Secure sliding door frame to adjoining wall panel as required by manufacturer.

• Door frame shall include recessed pull on inside of office.

• Door frame shall include pull handle on outside of office.

• Door jamb shall be attached to adjoining wall panel for door to slide into.

Width: 38”

Depth: 66”

1Q. PAPER MANAGEMENT RAIL

Solicitation Item 0017(applies to Room 229)

• Metal management rail.

• Rail mounted metal brackets attach to panel slots for desired height.

• Acceptable nominal dimensions:

Rail height: 6” Width: 30”, 36”, 42”, 48”.

1R. PARTITION WALL PANELS

Solicitation Item 0018(applies to Room 229)

• Factory welded and prime coated metal frame.

• Frame stiles shall include slots for hanging components, brackets, tiles and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 24”.

Height: 35”.

Depth: 3”.

1S. PARTITION WALL PANELS

Solicitation Item 0019(applies to Room 229) and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 30”.

1T. PARTITION WALL PANELS

Solicitation Item 0020(applies to Room 229) and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 42”.

1U. PARTITION WALL PANELS

Solicitation Item 0021(applies to Room 229) and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 48”.

1V. PARTITION WALL PANELS

Solicitation Item 0022(applies to Room 229) and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 36”.

Height: 42”.

1W. PARTITION WALL PANELS

Solicitation Item 0023(applies to Room 229) and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 24”.

Height: 68”.

1X. PARTITION WALL PANELS

Solicitation Item 0024(applies to Room 229) and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 36”.

1Y. PARTITION WALL PANELS

Solicitation Item 0025(applies to Room 229) and electrical items at 1” increments minimum

• Metal base cover with two knockouts for power/data ports on inside panel surface. Include faceplates for electrical outlets matching base cover finish.

• Steel stem leveling glides with plastic foot.

• Wall panel frame includes hardware for frame to frame, supporting tiles, metal posts and unequal-height panel frame connection.

• Wall panels include trim material for exposed corners, caps and edge surfaces.

• 20 gauge factory primed and painted monolithic, non-perforated, steel cover tile mounted lower tiles on both sides of wall panels.

• Acoustical tile surface shall be tack supporting fabric woven and bonded to 3/8 inch minimum thickness fiberglass substrate upper tiles on both sides.

• 1 ½ minimum thickness acoustical sound reducing insert within tile frame.

• Galvanized steel backer rails and slots to support tiles, work surface brackets, electrical harnesses, bottom covers, paper management rails and trim as required.

• Include necessary metal brackets to support work surfaces.

• Acceptable nominal dimensions:

Width: 48”.

1Z. POWER AND DATA HARNESS

Solicitation Item 0026(applies to Room 229)

• Factory assembled.

• Assembly shall be UL listed.

• One knockout will be dedicated for communication module per cubicle/workstation.

• Harness shall provide for minimum of 2 duplex receptacles facing inside cubicle panel surface including terminals and conductors.

• Receptacles shall be 4-circuit, 15 amp, 125 volt.

• Communication module shall support CAT 6 cabling and will be mounted separately from power receptacles.

• Include necessary connectors, extenders, conductors, wiring, mounting brackets and jumpers to power partition panels.

• Harness installation shall be at bottom of partition panels.

• Furnish harnesses, base feeds, power duplexes, wiring, etc. as required to provide power and telecommunication service to cubicles and workstations.

2. DESK FURNITURE

2A. L-SHAPED DESK AND RETURN

Solicitation Item 0027 (applies to Rooms 218, 222, 227)

• High-pressure laminate surfaces with laminate edging.

• Cherry finish desktop surface or similar color.

• Gloss finish on exposed surfaces.

• Wire management round metal grommets on desk side panels.

• Drawers shall be lockable.

• Drawer shall include metal pull handle.

• Drawers shall have heavy duty full extension slides operating on ball bearings with adjustable leveling glides.

• Furnish necessary brackets, steel angles, screws, etc. as necessary to assemble the furniture at site.

• ¾” deep minimum full modesty panel of same finish as desktop for desk and return.

• Furniture may be shipped unassembled and assembled at site by Bidder.

• Acceptable nominal dimensions:

Desk: 72"W x 36"D x 29"H

Return: 42"W x 24"D x 29"H

• Pedestal laminate surface’s finish shall match desk and return finish.

• Include pedestal with two- twelve inch file drawers mounted to return.

• Include pedestal with two-six inch box drawers and one- twelve inch file drawer mounted to desk.

• Include six-inch pencil tray drawer mounted under desk work surface.

• File drawers shall include adaptable rails for letter and legal filing.

2B. U-SHAPED DESK, BRIDGE, AND CREDENZA

Solicitation Item 0028 (applies to Room 229)

• High-pressure laminate surfaces with laminate edging.

• Cherry finish desktop surface or similar color.

• Gloss finish on exposed surfaces.

• Wire management round metal grommets on desk side panels.

• Drawers shall be lockable.

• Drawer shall include metal pull handle.

• Drawers shall have heavy duty full extension slides operating on ball bearings with adjustable leveling glides.

• Furnish necessary brackets, steel angles, screws, etc. as necessary to assemble the furniture at site.

• ¾” deep minimum full modesty panel of same finish as desktop for desk and return.

• Furniture may be shipped unassembled and assembled at site by Bidder.

• Acceptable nominal dimensions:

Desk: 72"W x 30"D x 29"H

Bridge: 42"W x 24"D x 29"H Credenza: 72"W x 24"D x 29"H

• Pedestal laminate surface’s finish shall match desk and return finish.

• Include pedestal with two- twelve inch file drawers mounted to return.

• Include pedestal with two-six inch box drawers and one- twelve inch file drawer mounted to desk.

• Include six-inch pencil tray drawer mounted under desk work surface.

File drawers shall include adaptable rails for letter and legal filing.

2C. U-SHAPED DESK, BRIDGE, AND CREDENZA

Solicitation Item 0029 (applies to Room 229)

• High-pressure laminate surfaces with laminate edging.

• Cherry finish desktop surface or similar color.

• Gloss finish on exposed surfaces.

• Wire management round metal grommets on desk side panels.

• Drawers shall be lockable.

• Drawer shall include metal pull handle.

• Drawers shall have heavy duty full extension slides operating on ball bearings with adjustable leveling glides.

• Furnish necessary brackets, steel angles, screws, etc. as necessary to assemble the furniture at site.

• ¾” deep minimum full modesty panel of same finish as desktop for desk and return.

• Furniture may be shipped unassembled and assembled at site by Bidder.

• Acceptable nominal dimensions:

Desk: 72"W x 36"D x 29"H

Bridge: 42"W x 24"D x 29"H Credenza: 72"W x 24"D x 29"H

• Pedestal laminate surface’s finish shall match desk and return finish.

• Include pedestal with two- twelve inch file drawers mounted to return.

• Include pedestal with two-six inch box drawers and one- twelve inch file drawer mounted to desk.

• Include six-inch pencil tray drawer mounted under desk work surface.

File drawers shall include adaptable rails for letter and legal filing.

2D. UPPER BOOKCASE

Solicitation Item 0030 (applies to Rooms 229, 230)

• Veneer surfaces with veneer edging.

• Cherry finish surface or similar color.

• Gloss finish on exposed surfaces.

• 2 shelves per segment.

• Adjustable shelf locations.

• Furniture may be shipped unassembled and assembled at site by Bidder.

• Acceptable nominal dimensions:

Bookcase: 72"W x 16"D x 42"H

2E. CREDENZA WITH STORAGE CABINETS

Solicitation Item 0031 (applies to Room 231)

• Veneer surfaces with veneer edging.

• Cherry finish surface or similar color.

• Gloss finish on exposed surfaces.

• Include 2 storage cabinets.

• Storage cabinet shall have one shelf behind two doors.

• Storage cabinet shall have adjustable shelf locations.

• Storage shall be lockable.

• Doors shall include metal pull handles.

• Furniture may be shipped unassembled and assembled at site by Bidder.

• Acceptable nominal dimensions:

Credenza: 72"W x 24"D x 29"H

2F. HUTCH

Solicitation Item 0032 (applies to Room 231)

• High-pressure laminate surfaces with laminate edging.

• Cherry finish surface or similar color.

• Gloss finish on exposed surfaces.

• 2 shelves per segment.

• Adjustable shelf locations.

• Furniture may be shipped unassembled and assembled at site by Bidder.

Hutch: 70"W x 16"D x 39"H

2G. L-SHAPED BOWED EXECUTIVE DESK AND RETURN

Solicitation Item 0033 (applies to Room 219, 221, 226)

• High-pressure bowfront shaped laminate top with laminate edging.

• Cherry finish desktop surface or similar color.

• Gloss finish on exposed surfaces.

• Wire management round metal grommets on desk side panels.

• Drawers shall be lockable.

• Drawer shall include metal pull handle.

• Drawers shall have heavy duty full extension slides operating on ball bearings with leveling glides.

• Furnish necessary brackets, steel angles, screws, etc. as necessary to assemble the furniture at site.

• ¾” deep minimum full modesty panel of same finish as desktop for desk and return.

• Furniture may be shipped unassembled and assembled at site by Bidder.

• Acceptable nominal dimensions:

Desk: 72"W x 36"D x 29"H Return: 42"W x 24"D x 29"H

• Pedestal laminate surface’s finish shall match desk finish.

• Include pedestal with two- twelve inch file drawers.

• Include pedestal with two-six inch box drawers and one- twelve inch file drawer.

• Include six-inch pencil tray drawer mounted under desk work surface.

• File drawers shall include adaptable rails for letter and legal filing.

2H. ROUND CONFERENCE TABLE

Solicitation Item 0034 (applies to Room 230)

• Wood laminate, one inch thick table top with matching finish edges.

• Gloss cherry finish.

• Slab base table top support.

• Furniture may be shipped unassembled

• Acceptable nominal dimensions:

• 48"diam. x 30"H

2I. WARDROBE CABINET

Solicitation Item 0035 (applies to Room 229, 230)

• Wood laminate with matching laminate finish edges.

• Gloss cherry finish.

• Fixed top shelf.

• Metal clothing rod mounted inside cabinet.

• Double doors shall be lockable.

• Furniture may be shipped unassembled

• Acceptable nominal dimensions: 24”Wx18”Dx71”H

2J. BOAT CONFERENCE TABLE

Solicitation Item 0036 (applies to Room 231)

• Wood veneered, two inch thick bowed table top with matching finish edges.

• Gloss cherry finish.

• Wood table top support with leveling glides.

• One wire grommet located at center of table every 48 inches of table length.

• Furniture may be shipped unassembled

• Acceptable nominal dimensions:

144"L x 48"W x 29"H

2K. BOWED CONFERENCE TABLE

Solicitation Item 0037 (applies to Room 219, 221, 226)

• High pressure laminate one inch thick table top with matching laminate finish edges.

• Gloss cherry finish.

• Wood table top support.

• Nylon glides.

• One wire grommet located at center of table.

• Furniture may be shipped unassembled

• Acceptable nominal dimensions:

72"L x 36"W x 29"H

2L.FREE STANDING MOVABLE PARTITION

Solicitation Item 0038(Applies to Room 220,220A)

• Factory assembled, primed and finished.

• 18 gauge steel frame construction.

• Partitions fitted with leveling glides under supporting legs.

• Core made of medium density fiberboard.

• Fabric exterior surface secured to foam padding which is mounted on fiberboard core.

• Acceptable nominal dimensions:

Width: 48” Height: 78” Depth: 2”

2M. FOLDING/NESTING METAL TRAINING TABLE

Solicitation Item 0039 (applies to Room 220,220A,225)

• High pressure laminate table top with vinyl edges.

• Gloss cherry finish.

• Steel frame, legs with casters on all legs.

• Casters shall be lockable.

• Levers shall allow table top to fold down.

• Table top can be secured either folded for storage or upright.

• Tables can be nested once table top is flipped.

• Acceptable nominal dimensions:

72"L x 24"W x 30"H

2N. SIDE CHAIR

Solicitation Item 0040(Applies to Room 218, 219, 220, 220A, 221, 222, 225, 226, 227, 229,230)

• Provide all available color options and finishes for selection.

• 4 leg side chair.

• Lightweight steel frame construction.

• Nylon mesh back with padded fabric covered seat.

• Contoured edge seat shape.

• Arm rests.

• Acceptable nominal Dimensions:

Overall Chair Size: 24”Wx25”Dx36”H Seat Size: 21"W x 19"D

2O. HIGH-BACK ROLLING CHAIR

Solicitation Item 0041(Applies to Room 230)

• Black powder coated steel chair frame

• Adjustable plastic arm rest with pad.

• Low back contoured edge seat with lumbar support built in back rest.

• High resilience molded soft arm rest

• High-back black nylon mesh back and fabric covered seat pad.

• Ergonomic adjustments shall include, but not limited to, height adjustment with tilt lock, back angle and height adjustment, tilt tension control, seat depth, arm height adjustment.

• 5-blade metal base with dual wheel casters.

• Rated to 300lbs.

Overall Chair Size: 27”Wx27”Dx42”H

Seat Size: 21"Wx20”D

2P. MID-BACK ROLLING CHAIR

Solicitation Item 0042(Applies to Room 218,219,221,222,226,227,229,231)

• Black powder coated steel chair frame

• Adjustable plastic arm rest with pad.

• Low back contoured edge seat with lumbar support built in back rest.

• High resilience molded soft arm rest

• High-back black nylon mesh back and fabric covered seat pad.

• Ergonomic adjustments shall include, but not limited to, height adjustment with tilt lock, back angle and height adjustment, tilt tension control, seat depth, arm height adjustment.

• 5-blade metal base with dual wheel casters.

• Rated to 300lbs.

• Acceptable nominal dimensions:

Overall Seat Size: 27”Wx26”Dx39”H Seat Size: 21"Wx190”D

2Q.4-DRAWER VERTICAL FILE CABINET

Solicitation Item 0043(Applies to Room 229)

• Free standing metal top and shell.

• Metal file drawer face shall match shell.

• Pedestal shall comprise of 4 file-type drawers.

• Each pedestal shall include factory installed locking mechanism.

• Built-in polystyrene hand pull on center of file drawer face.

• File drawers shall be full extension with counterweight and mechanical interlock to prevent extension of two or more drawers at the same time.

• Pedestal edges shall be square

• Drawers shall include telescoping steel ball-bearing slides with adjustable glides.

• Pedestal frame shall include necessary crossbars to ensure strength and rigidity.

• Include 2 hang rails per drawer for hang filing.

• Acceptable nominal dimensions:

Width: 15” Height: 52” Depth: 26”

2R.METAL STORAGE TABLE WITH SLIDING DOORS

Solicitation Item 0044(Applies to Room 229)

• 18 gauge welded steel construction.

• Steel reinforced table top.

• Two sliding doors cover storage space.

• Each door shall have a pull handle.

• Table supported by steel legs.

• Acceptable nominal dimensions:

Width: 60” Height: 30” Depth: 30”

2S.METAL STORAGE CABINET

Solicitation Item 0045(Applies to Room 229)

• Steel construction.

• Raised base.

• Reinforced steel solid doors.

• Two swinging doors cover storage space.

• Cabinet shall be lockable.

• Turn handle on each door.

• 4 shelves and one fixed.

• Adjustable shelve placement.

• Front levelers to level cabinet.

• Acceptable nominal dimensions:

Width: 36” Height: 72”

Depth: 18”

2T.METAL 4-DRAWER LATERAL STORAGE CABINET

Solicitation Item 0046(Applies to Room 229)

• Steel construction.

• Double wall raised base.

• Cabinet shall be lockable.

• Each drawer shall include pull handle.

• Built-in counterweight to stabilize cabinet when drawer is opened.

• Mechanical interlock prevents more than one drawer from being opened at a time.

• Heavy duty steel ball-bearing drawer suspension for easy drawer operation.

• Acceptable nominal dimensions:

Width: 36” Height: 52”

2U. TACKBOARD

Solicitation Item 0047(Applies to Room 220,220A, 225)

• Aluminum trim.

• Cork board surface mounted to insulation board.

• Acceptable nominal dimensions:

Width: 96” Height: 48”

2V. DRY EASE WHITE BOARD

Solicitation Item 0048(Applies to Room 220,220A,225,229)

• Full length map rail.

• Porcelain-on-steel magnetic marker board.

• Smooth, low gloss white surface.

• Surface capable of erasing markers without ghosting.

• Anodized aluminum accessory tray with plastic end caps.

• Acceptable nominal dimensions:

Width: 96” Height: 48”

2X. ROUND 7 GAL. PLASTIC TRASHCAN

Solicitation Item 0049(Applies to Room 218,219,220,220A,221,222,225,226,227,229,230,231)

• One-piece round body construction.

• 7 gallon capacity.

• Molded-in rolled rim.

PA

R

K

IN

G L

O T

C

PA

R

K

IN

G L

O T

BPA

R

K

IN

G L

O T

A

Fr on t G at e

A ll ve hi cl es th ru he re

,s ho w dr iv er

's lic en se

P ar k he re

M ee th er e fo r si te vi si tP at h to pa rk in g ar ea

S id co D riv e