B.06 RFIs Answered (25-R-A009).pdf
PDF 457 KB Posted
- Attached to
- LRS - Overhead Crane
- Solicitation number
- W912L325RA009
About this file
This document is a Request for Information (RFI) for a VM Overhead Crane project located in Cheyenne, Wyoming. The solicitation (No. W912L325RA009) seeks technical details about a 10-ton overhead crane to be installed indoors, with quotes due by 19 Sep 2025. Key technical specifications include a dual-speed hoist with pendant control, intended for lifting engines, trailers, vehicles, and 55-gallon drums, with a maximum lift capacity of 10 tons. The crane will operate in an indoor environment with temperatures ranging from 55-90 degrees Fahrenheit and 10-40% humidity. The government will supply load test weights and will follow standard OSHA/CFR inspection standards. Many technical details are still pending, with multiple questions about crane specifications, runway length, electrical power, and structural requirements marked as "Answers pending from USG."
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A.02 Product Description (25RA009).pdf | ||
| B.08 Solicitation - (25RA009).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Project Title VM Overhead Crane RFI Due By 15 Sep 2025 @ 10:00 MST
Solicittion No. W912L325RA009 Quotes Due By 19 Sep 2025 @ 10:00 MST
Location Cheyenne, WY
Subject Govt response to submitted request for infomration (RFI).
ROBERTO RODRIGUEZ-SANTIAGO
CONTRACTING OFFICER (KO)
DATE: 18SEP2025
No. Topic Reference
Document Question Type Govt Response
1 Specs/Designs N/A
"Can you please send me the specifications and any drawings you have for this project? Of if you have a link that would be helpful too. I need to know capacity, span, height, etc."
Technical Answers pending from USG.
2 Specs/Designs N/A "Span of the bridge crane?" Technical Answers pending from USG.
3 Specs/Designs N/A "Length of the crane runway?" Technical Answers pending from USG.
4 Specs/Designs N/A "The amount of lift needed by the hoist?" Technical The hoist will need to lift 10 tons due to large airport vehicels (fire trucks, snow equipment, refuelers)
5 Specs/Designs N/A "Structural drawings or load data for the new VM building (roof beams, columns, load-bearing capacity)."
Technical Answers pending from USG.
6 Specs/Designs N/A Ceiling height, required hook height, and runway length. Technical Answers pending from USG.
7 Specs/Designs N/A Layout drawings showing obstructions (HVAC, ducting, lights, sprinklers).
Technical Answers pending from USG.
8 Specs/Designs N/A Indoor vs. outdoor environment (temperature ranges, dust, humidity).
Technical The crane will be installed indoors, 55-90 degree F. 10-
40% humidity.
9 Specs/Designs N/A Available electrical power (voltage, phase, and amperage). Technical Answers pending from USG.
10 Specs/Designs N/A Type of loads to be lifted (engines, armored vehicle components, etc.) and whether 10 tons is maximum or routine.
Technical
Typical loads will be engines, Trailers, vehicles, 55gal drums, misc equipment. 10 tons will be maximum capacity, not routine.
11 Specs/Designs N/A Preferred lifting/hoisting speeds (single-speed, dual-speed, variable frequency drive).
Technical Preferred lifting/hoisting speed will be dual-speed.
12 Specs/Designs N/A Control preference (pendant, wireless remote, cab controls). Technical The USG would prefer a pendant control.
13 Specs/Designs N/A Required safety features (overload protection, limit switches, anti-collision sensors, alarms).
Technical The USG will require no additional safety features needed unless required by OSHA/Law.
14 Specs/Designs N/A Load test requirements (percentage of rated load, procedure, documentation).
Technical The load test requirements will need to utilize
OSHA/industry standard ratings (125%)
15 Specs/Designs N/A Whether test weights will be supplied by the Government or must be included in vendor scope.
Technical The Government will supply load tests
16 Specs/Designs N/A Applicable inspection standards (OSHA 29 CFR 1910.179, CMAA, ANSI/ASME).
Technical Standard OSHA/CFR standards as listed in the question. (OSHA 29 CFR 1910.179)
17 Specs/Designs N/A Measurement from floor to top of rail? Technical Answers pending from USG.
18 Specs/Designs N/A Measurement from floor to lowest obstruction above where crane operates?
Technical Answers pending from USG.
19 Specs/Designs N/A 460/3/60 power? Technical Answers pending from USG.
20 Specs/Designs N/A CMAA Duty Class? Technical Answers pending from USG.
21 Specs/Designs N/A Do you have any drawings and specifications? Technical Answers pending from USG.
22 Specs/Designs N/A 10 ton Crane span? Technical Answers pending from USG.
23 Specs/Designs N/A Required hook height? Technical Answers pending from USG.
24 Specs/Designs N/A Indoor or outdoor operation? Technical Answers pending from USG.
25 Specs/Designs N/A Runway length? Principle dimensions that you are looking for? Technical Answers pending from USG.
| 2025-09-18T13:59:33-0600 | |
| RODRIGUEZSANTIAGO.ROBERT.1023372238 |
File details come from the government source that posted it. Updated .