12-T-0048CompressorMOD3.doc

Section SF 1449 - CONTINUATION SHEET

WAWF & LOCAL CLAUSES

LOCAL CLAUSES, TERMS, CONDITIONS AND INSTRUCTIONS

WIDE AREA WORK FLOW (WAWF INSTRUCTIONS)

INCORPORATED BY FULL TEXT

108 ARW – AA – 0000 GSA/OTHER CONTRACT

All terms and conditions of your GSA/OTHER contract are hereby incorporated by reference. The contractor will furnish the contracting office the entire contract and any modifications thereto upon request.

108 ARW -AA -0010 CUSTOMER INSTRUCTIONS

The customer is responsible for forwarding proof of delivery (SF 1449/DD FORM 1155 or DD 250 or electronic equivalent) signed by a government official to the address located in block 18a. Failure to do so may cause a delay in payment to the contractor.

If any items delivered are not in accordance with the contract or purchase order, notify the contracting officer in writing.

108 ARW – AA – 0020 WARRANTY

UNLESS OTHERWISE STATED, STANDARD COMMERCIAL WARRANTIES APPLY, PLEASE FURNISH A WRITTEN COPY WITH YOUR DELIVERY.

108 ARW – AA – 0030 CONTRACTING OFFICE E-MAIL ADDRESS/PHONE/FAX NUMBER(S)

DAVID.BROWN.14@ANG.AF.MIL and/or

JOYCE.BAKER@ANG.AF.MIL

PHONE: 609-754-4157 DSN 650-4157

PHONE: 609-754-3117 DSN 650-3117

FACSIMILE NUMBER: 609-754-3143 DSN 650-3143

108 ARW – AA – 0040 FEDERAL, STATE AND LOCAL TAXES-GOVERNMENTAL ENTITY

The U.S. Government is exempt from state sales or use taxes and federal excise taxes. For additional information contact your local, state, or federal taxing authority.

108 ARW – AA – 0050 DELIVERY TIMES

The following delivery times are established for contractors:

MONDAYS -THURSDAYS: 08:00 A.M. TO 4:00 P.M.

FRIDAYS: CLOSED

No deliveries will be accepted on Federal holidays.

Call in advance to ensure delivery availability. 609-754-4157 OR 609-754-3117

All vendors shall have a delivery ticket with each delivery. The delivery ticket will ensure prompt processing of payment.

108 ARW – AA – 0060 DELIVERY INTENT/NOTIFICATION CLAUSE

DELIVERY INTENT: It is the contractor’s responsibility to notify the 108 CONTRACTING OFFICE or the customer a minimum of three (3) days prior to the anticipated date of product delivery. Contractor shall provide:

1) Government purchase order number

2) Delivery Point

3.) Carrier name and tracking information/estimated delivery date

DELIVERY PARTIAL/COMPLETE: It is the contractor’s responsibility to notify the 108TH CONTRACTING OFFICE within seven (7) days after a partial/complete delivery of goods. Contractor shall provide

1) Purchase order number

2) Delivery Point/Service Point

3.) Name of the person who accepted delivery and actual date of delivery.

4.) Other information as required by the contracting office

The preferred method is via e-mail to address shown in 108 ARW – AA – 0030. You may fax the information to number shown in 108 ARW – AA – 0030. Be sure to include a principle point of contact at your company, telephone number, fax number and e-mail address.

108 ARW – AA – 0070 INSTALLATION PASSES/ACCESS TO MCGUIRE AFB

Contractors should be aware that this is a Military Installation and that all access to this installation is granted by the McGuire AFB Security Forces. Prior to making deliveries please contact 609-754-3938 and follow instructions provided by the Security Forces for access to McGuire AFB, NJ. The U.S government will not be held liable for any delays or breach of contract caused by refusal of the McGuire AFB Security Forces. If a gate pass is not granted to a contractor allowing the delivery of goods, execution of warranty support, or performance of services please contact the contracting officer immediately in writing via email.

108 ARW – AA – 0080

BLOCK 18a OF SF 1449/BLOCK 11 OF DD FORM 1155 -PAYMENT WILL BE

MADE BY:

MAILING ADDRESS: PHYSICAL ADDRESS:

Defense Finance and Accounting Service Defense Finance and Accounting Service

DFAS-BAASD/CC Limestone Field Organization

PO Box 369020 27 Arkansas Road

Columbus OH 43236-9024 Limestone ME 04751-1500

ATTN: Limestone Documents

PAYMENT INQUIRIES VIA WEB: http://www.dod.mil/dfas

EFT OR PAYMENT INQUIRES CALL: 1-800-756-4571 Option 2, then Option 3

REMIT PAYMENT IN ACCORDANCE WITH DFAS POLICY

108 ARW – AA –0090

BLOCK 18b of SF 1449/BLOCK 13 of DD FORM 1155

SUBMIT INVOICES TO:

ALL INVOICES MUST BE SUBMITTED VIA WIDE AREA WORK FLOW UNLESS

OTHERWISE AUTHORIZED IN WRITING BY THE CONTRACTING OFFICE.

108 ARW – AA – 100

REFERENCE DOD FAR SUP 252.232-7003

WAWF INSTRUCTIONS

Entering an Invoice in WAWF

1. Enter the WAWF web site at https://wawf.eb.mil. Click the Accept button.

2. Enter your User ID and password and click Login.

3. Click Accept on User Agreement page.

4. Click Vendor tab at the top of page.

5. Click Create Document.

6. Enter Contract Number from your contract (SF1449, Block 2 or DD1155, Block 1). If invoice is for a GSA Delivery Order or BPA Call Order, enter Delivery or Call Order Number from your contract in Delivery Order field. Do not use dashes or other punctuation in Contract or Delivery Order fields. Select your CAGE Code from the Drop Down box. Click Next.

7. Pay Official box should self-populate. Check to see if it matches the Code on your contract (SF1449, Block 18a or DD1155, Block 15) and click next.

8. Select radio button next to “Invoice and Receiving Report (Combo).” Wait for the screen to refresh.

9. The fields will self-populate from the contract or information you’ve already entered. Click Next. DO NOT check the Fast Pay block. This is a special clause used only in very specific situations where payment is made prior to delivery, and is rarely included in contracts. Checking this box will cause your invoice to reject and delay your payment.

10. Most of this screen will self-populate. Enter Ship To Code from Contract (SF1449 Block 15 or DD1155 Block 14). If your contract/PO has F8G3CR or F8G1OP – use FA6302 instead. Click Next.

11. Start with the Header tab. Select DOD Contract (FAR) from the Contract Number Type drop down. Select a radio button for Supplies or Services, depending on what the contract was for. Type a 4-digit number in Shipment Number field. Start with “0001” for a single shipment or the first of multiple shipments. Continue consecutively for multiple shipments against the same order. Select a Shipment date and Estimated Delivery date using the calendar icons. These may be the same date, but the Delivery Date is usually later for items that are shipped via commercial carriers. Select Y (yes) or N (no) from Final Shipment dropdown, as applicable. Type number in Invoice Number. Invoice date should self-populate. Select Y (yes) or N (no) from Final Invoice dropdown, as applicable. If there are multiple shipments and/or invoices for the contract, select N from the Final shipment and Final Invoice drop-down boxes until you are entering the final invoice for the final shipment, at which point you may select Y. Click on Line Items tab at top of page.

12. Click on Add link under Action column on Line Item Details line.

13. Enter line item numbers in Item No. field EXACTLY as they appear on your contract. The item numbers are usually 4-6 characters, and may be all digits or a combination of digits and letters. Enter Quantity and Unit of Issue from contract in appropriate fields. Unit of Issue is entered as a two-letter abbreviation. You may click on the Lookup button and select Units of Measure Lookup to find correct abbreviations. Type Unit Price in American Dollars in Unit Price field. Unit Price may be equal to or less than the amount shown on the contract. Amount field will self-calculate. Type in a brief description of line item in Description field. This field is not required to match verbatim with the text of the contract, but it should be readily apparent that the item/service being billed is the same as the item/service that was ordered. Click Save CLIN button. Repeat steps 12 and 13 for each line item being billed on the contract.

14. The Header and Line Item tabs are the only mandatory tabs. You may click on the other tabs and complete the information if you wish to add discounts, miscellaneous fees, or other information to your invoice. When all tabs have been completed, click Submit.

15. The following screen should appear if everything was entered correctly. If error messages appear, go back and correct the errors and click Submit again.

16. That’s it – you’re finished! Please click LogOut from the menu bar and close your browser window. You may expect payment to show up in the bank account indicated in your CCR registration within the time frame indicated by your Prompt Payment Discount Terms.

17. You may check your payment status at the myInvoice web site located at https://myinvoice.csd.disa.mil//index.html. Use the Vendor Registration link to register, and you will be able to check the status of payments made within the last 90 days.

YOU MAY ALSO ACCESS THE FOLLOWING LINK FOR MORE DETAILED STEP BY STEP INSTRUCTIONS ON SUBMTTING INVOICES:

http://www.dfas.mil/ecommerce/wawf/info.html - Go to the bottom of the page, under WAWF Training Document Links – Vendors: click create document instructions. On the next page, choose Invoice and Receiving Report (Combo).

Additional WAWF guidance:

Wide Area Work Flow-Receipt and Acceptance (WAWF-RA). Information regarding

WAWF-RA is available on the Internet at https://wawf.eb.mil ----------------------------------------------------Last Page-----------------------------------------------------

WAGE DETERMINATION

WD 05-2449 (Rev.-12) was first posted on www.wdol.gov on 06/19/2012

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2449

Diane C. Koplewski Division of | Revision No.: 12

Director Wage Determinations| Date Of Revision: 06/13/2012

States: New Jersey, Pennsylvania

Area: New Jersey Counties of Burlington, Camden, Gloucester

Pennsylvania Counties of Bucks, Chester, Delaware, Lehigh, Montgomery, Northampton, Philadelphia

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 14.53

01012 - Accounting Clerk II 16.31

01013 - Accounting Clerk III 18.24

01020 - Administrative Assistant 27.42

01040 - Court Reporter 21.74

01051 - Data Entry Operator I 14.22

01052 - Data Entry Operator II 15.51

01060 - Dispatcher, Motor Vehicle 17.92

01070 - Document Preparation Clerk 13.66

01090 - Duplicating Machine Operator 13.66

01111 - General Clerk I 13.45

01112 - General Clerk II 14.68

01113 - General Clerk III 16.48

01120 - Housing Referral Assistant 24.11

01141 - Messenger Courier 12.91

01191 - Order Clerk I 14.81

01192 - Order Clerk II 15.68

01261 - Personnel Assistant (Employment) I 16.56

01262 - Personnel Assistant (Employment) II 18.52

01263 - Personnel Assistant (Employment) III 20.64

01270 - Production Control Clerk 22.74

01280 - Receptionist 14.72

01290 - Rental Clerk 16.83

01300 - Scheduler, Maintenance 17.52

01311 - Secretary I 19.12

01312 - Secretary II 21.84

01313 - Secretary III 24.11

01320 - Service Order Dispatcher 16.76

01410 - Supply Technician 27.02

01420 - Survey Worker 17.92

01531 - Travel Clerk I 13.42

01532 - Travel Clerk II 14.10

01533 - Travel Clerk III 15.03

01611 - Word Processor I 15.91

01612 - Word Processor II 17.86

01613 - Word Processor III 19.98

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 22.83

05010 - Automotive Electrician 22.03

05040 - Automotive Glass Installer 20.34

05070 - Automotive Worker 21.11

05110 - Mobile Equipment Servicer 19.63

05130 - Motor Equipment Metal Mechanic 22.81

05160 - Motor Equipment Metal Worker 21.22

05190 - Motor Vehicle Mechanic 22.83

05220 - Motor Vehicle Mechanic Helper 18.71

05250 - Motor Vehicle Upholstery Worker 20.54

05280 - Motor Vehicle Wrecker 21.22

05310 - Painter, Automotive 22.14

05340 - Radiator Repair Specialist 21.22

05370 - Tire Repairer 14.89

05400 - Transmission Repair Specialist 23.49

07000 - Food Preparation And Service Occupations

07010 - Baker 13.05

07041 - Cook I 12.99

07042 - Cook II 13.84

07070 - Dishwasher 9.76

07130 - Food Service Worker 11.55

07210 - Meat Cutter 17.30

07260 - Waiter/Waitress 10.10

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 19.40

09040 - Furniture Handler 17.39

09080 - Furniture Refinisher 22.85

09090 - Furniture Refinisher Helper 19.50

09110 - Furniture Repairer, Minor 21.21

09130 - Upholsterer 19.41

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 12.81

11060 - Elevator Operator 12.33

11090 - Gardener 16.09

11122 - Housekeeping Aide 12.81

11150 - Janitor 12.81

11210 - Laborer, Grounds Maintenance 13.67

11240 - Maid or Houseman 11.29

11260 - Pruner 12.83

11270 - Tractor Operator 15.33

11330 - Trail Maintenance Worker 13.76

11360 - Window Cleaner 13.61

12000 - Health Occupations

12010 - Ambulance Driver 17.48

12011 - Breath Alcohol Technician 20.44

12012 - Certified Occupational Therapist Assistant 22.91

12015 - Certified Physical Therapist Assistant 22.60

12020 - Dental Assistant 18.36

12025 - Dental Hygienist 32.95

12030 - EKG Technician 30.31

12035 - Electroneurodiagnostic Technologist 30.31

12040 - Emergency Medical Technician 17.48

12071 - Licensed Practical Nurse I 20.15

12072 - Licensed Practical Nurse II 22.05

12073 - Licensed Practical Nurse III 24.57

12100 - Medical Assistant 14.97

12130 - Medical Laboratory Technician 21.17

12160 - Medical Record Clerk 15.47

12190 - Medical Record Technician 17.00

12195 - Medical Transcriptionist 17.02

12210 - Nuclear Medicine Technologist 34.99

12221 - Nursing Assistant I 10.52

12222 - Nursing Assistant II 11.83

12223 - Nursing Assistant III 12.91

12224 - Nursing Assistant IV 14.49

12235 - Optical Dispenser 21.62

12236 - Optical Technician 16.60

12250 - Pharmacy Technician 15.13

12280 - Phlebotomist 14.49

12305 - Radiologic Technologist 28.02

12311 - Registered Nurse I 29.51

12312 - Registered Nurse II 32.76

12313 - Registered Nurse II, Specialist 32.76

12314 - Registered Nurse III 39.32

12315 - Registered Nurse III, Anesthetist 39.32

12316 - Registered Nurse IV 47.11

12317 - Scheduler (Drug and Alcohol Testing) 23.50

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 21.74

13012 - Exhibits Specialist II 28.77

13013 - Exhibits Specialist III 35.16

13041 - Illustrator I 22.94

13042 - Illustrator II 30.61

13043 - Illustrator III 37.43

13047 - Librarian 31.00

13050 - Library Aide/Clerk 16.83

13054 - Library Information Technology Systems 27.98

Administrator

13058 - Library Technician 17.62

13061 - Media Specialist I 18.35

13062 - Media Specialist II 20.52

13063 - Media Specialist III 22.88

13071 - Photographer I 17.96

13072 - Photographer II 19.97

13073 - Photographer III 25.04

13074 - Photographer IV 30.62

13075 - Photographer V 37.06

13110 - Video Teleconference Technician 22.29

14000 - Information Technology Occupations

14041 - Computer Operator I 18.50

14042 - Computer Operator II 20.70

14043 - Computer Operator III 23.06

14044 - Computer Operator IV 25.64

14045 - Computer Operator V 28.39

14071 - Computer Programmer I (see 1)

14072 - Computer Programmer II (see 1)

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 18.50

14160 - Personal Computer Support Technician 25.64

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 33.14

15020 - Aircrew Training Devices Instructor (Rated) 40.11

15030 - Air Crew Training Devices Instructor (Pilot) 48.06

15050 - Computer Based Training Specialist / Instructor 33.14

15060 - Educational Technologist 30.33

15070 - Flight Instructor (Pilot) 48.06

15080 - Graphic Artist 24.99

15090 - Technical Instructor 24.41

15095 - Technical Instructor/Course Developer 29.85

15110 - Test Proctor 19.71

15120 - Tutor 19.71

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 9.77

16030 - Counter Attendant 9.77

16040 - Dry Cleaner 12.76

16070 - Finisher, Flatwork, Machine 9.77

16090 - Presser, Hand 9.77

16110 - Presser, Machine, Drycleaning 9.77

16130 - Presser, Machine, Shirts 9.77

16160 - Presser, Machine, Wearing Apparel, Laundry 9.77

16190 - Sewing Machine Operator 13.65

16220 - Tailor 14.52

16250 - Washer, Machine 10.80

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 20.24

19040 - Tool And Die Maker 24.23

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 19.21

21030 - Material Coordinator 20.91

21040 - Material Expediter 20.91

21050 - Material Handling Laborer 13.92

21071 - Order Filler 13.88

21080 - Production Line Worker (Food Processing) 19.21

21110 - Shipping Packer 16.45

21130 - Shipping/Receiving Clerk 16.45

21140 - Store Worker I 16.93

21150 - Stock Clerk 19.11

21210 - Tools And Parts Attendant 19.21

21410 - Warehouse Specialist 19.21

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 26.75

23021 - Aircraft Mechanic I 25.74

23022 - Aircraft Mechanic II 26.75

23023 - Aircraft Mechanic III 28.12

23040 - Aircraft Mechanic Helper 20.97

23050 - Aircraft, Painter 21.66

23060 - Aircraft Servicer 22.92

23080 - Aircraft Worker 23.95

23110 - Appliance Mechanic 21.01

23120 - Bicycle Repairer 15.11

23125 - Cable Splicer 34.08

23130 - Carpenter, Maintenance 24.40

23140 - Carpet Layer 22.57

23160 - Electrician, Maintenance 29.02

23181 - Electronics Technician Maintenance I 25.72

23182 - Electronics Technician Maintenance II 27.03

23183 - Electronics Technician Maintenance III 27.92

23260 - Fabric Worker 21.87

23290 - Fire Alarm System Mechanic 23.71

23310 - Fire Extinguisher Repairer 22.72

23311 - Fuel Distribution System Mechanic 26.86

23312 - Fuel Distribution System Operator 23.17

23370 - General Maintenance Worker 21.37

23380 - Ground Support Equipment Mechanic 25.74

23381 - Ground Support Equipment Servicer 22.92

23382 - Ground Support Equipment Worker 23.95

23391 - Gunsmith I 22.07

23392 - Gunsmith II 23.77

23393 - Gunsmith III 25.51

23410 - Heating, Ventilation And Air-Conditioning 25.17

Mechanic

23411 - Heating, Ventilation And Air Contditioning 26.15

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 24.33

23440 - Heavy Equipment Operator 27.08

23460 - Instrument Mechanic 25.03

23465 - Laboratory/Shelter Mechanic 24.64

23470 - Laborer 15.83

23510 - Locksmith 23.29

23530 - Machinery Maintenance Mechanic 24.32

23550 - Machinist, Maintenance 21.24

23580 - Maintenance Trades Helper 18.52

23591 - Metrology Technician I 25.03

23592 - Metrology Technician II 26.01

23593 - Metrology Technician III 26.83

23640 - Millwright 25.21

23710 - Office Appliance Repairer 23.06

23760 - Painter, Maintenance 21.97

23790 - Pipefitter, Maintenance 30.24

23810 - Plumber, Maintenance 26.56

23820 - Pneudraulic Systems Mechanic 25.51

23850 - Rigger 25.51

23870 - Scale Mechanic 23.77

23890 - Sheet-Metal Worker, Maintenance 26.51

23910 - Small Engine Mechanic 18.79

23931 - Telecommunications Mechanic I 25.91

23932 - Telecommunications Mechanic II 26.92

23950 - Telephone Lineman 28.29

23960 - Welder, Combination, Maintenance 20.91

23965 - Well Driller 23.53

23970 - Woodcraft Worker 25.51

23980 - Woodworker 19.14

24000 - Personal Needs Occupations

24570 - Child Care Attendant 12.00

24580 - Child Care Center Clerk 14.96

24610 - Chore Aide 11.62

24620 - Family Readiness And Support Services 14.06

Coordinator

24630 - Homemaker 14.79

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 22.73

25040 - Sewage Plant Operator 22.47

25070 - Stationary Engineer 22.73

25190 - Ventilation Equipment Tender 18.74

25210 - Water Treatment Plant Operator 22.47

27000 - Protective Service Occupations

27004 - Alarm Monitor 20.30

27007 - Baggage Inspector 13.48

27008 - Corrections Officer 24.29

27010 - Court Security Officer 27.70

27030 - Detection Dog Handler 18.81

27040 - Detention Officer 24.29

27070 - Firefighter 27.25

27101 - Guard I 13.48

27102 - Guard II 18.81

27131 - Police Officer I 28.28

27132 - Police Officer II 31.43

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 11.46

28042 - Carnival Equipment Repairer 12.02

28043 - Carnival Equpment Worker 9.59

28210 - Gate Attendant/Gate Tender 16.04

28310 - Lifeguard 12.78

28350 - Park Attendant (Aide) 17.94

28510 - Recreation Aide/Health Facility Attendant 11.54

28515 - Recreation Specialist 22.22

28630 - Sports Official 14.29

28690 - Swimming Pool Operator 17.23

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 24.30

29020 - Hatch Tender 24.30

29030 - Line Handler 24.30

29041 - Stevedore I 23.38

29042 - Stevedore II 25.20

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 38.17

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.31

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.98

30021 - Archeological Technician I 20.33

30022 - Archeological Technician II 22.75

30023 - Archeological Technician III 28.18

30030 - Cartographic Technician 28.27

30040 - Civil Engineering Technician 26.15

30061 - Drafter/CAD Operator I 20.33

30062 - Drafter/CAD Operator II 22.75

30063 - Drafter/CAD Operator III 25.36

30064 - Drafter/CAD Operator IV 31.21

30081 - Engineering Technician I 18.23

30082 - Engineering Technician II 20.47

30083 - Engineering Technician III 23.23

30084 - Engineering Technician IV 28.83

30085 - Engineering Technician V 35.18

30086 - Engineering Technician VI 42.58

30090 - Environmental Technician 21.49

30210 - Laboratory Technician 25.35

30240 - Mathematical Technician 28.18

30361 - Paralegal/Legal Assistant I 19.08

30362 - Paralegal/Legal Assistant II 23.64

30363 - Paralegal/Legal Assistant III 28.92

30364 - Paralegal/Legal Assistant IV 34.64

30390 - Photo-Optics Technician 28.18

30461 - Technical Writer I 21.76

30462 - Technical Writer II 26.62

30463 - Technical Writer III 34.22

30491 - Unexploded Ordnance (UXO) Technician I 24.25

30492 - Unexploded Ordnance (UXO) Technician II 29.35

30493 - Unexploded Ordnance (UXO) Technician III 35.17

30494 - Unexploded (UXO) Safety Escort 24.25

30495 - Unexploded (UXO) Sweep Personnel 24.25

30620 - Weather Observer, Combined Upper Air Or (see 3) 25.36

Surface Programs

30621 - Weather Observer, Senior (see 3) 28.18

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 15.22

31030 - Bus Driver 19.16

31043 - Driver Courier 18.13

31260 - Parking and Lot Attendant 10.54

31290 - Shuttle Bus Driver 19.00

31310 - Taxi Driver 12.01

31361 - Truckdriver, Light 19.00

31362 - Truckdriver, Medium 19.28

31363 - Truckdriver, Heavy 19.99

31364 - Truckdriver, Tractor-Trailer 19.99

99000 - Miscellaneous Occupations

99030 - Cashier 11.80

99050 - Desk Clerk 12.64

99095 - Embalmer 33.77

99251 - Laboratory Animal Caretaker I 11.48

99252 - Laboratory Animal Caretaker II 12.25

99310 - Mortician 34.20

99410 - Pest Controller 17.02

99510 - Photofinishing Worker 14.65

99710 - Recycling Laborer 18.72

99711 - Recycling Specialist 21.14

99730 - Refuse Collector 17.57

99810 - Sales Clerk 12.43

99820 - School Crossing Guard 11.48

99830 - Survey Party Chief 20.60

99831 - Surveying Aide 12.23

99832 - Surveying Technician 18.07

99840 - Vending Machine Attendant 14.45

99841 - Vending Machine Repairer 16.98

99842 - Vending Machine Repairer Helper 14.45

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $3.71 per hour or $148.40 per week or $643.07 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther

King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) APPLICABLE TO AIR TRAFFIC CONTROLLERS ONLY - NIGHT DIFFERENTIAL: An employee is entitled to pay for all work performed between the hours of 6:00 P.M. and 6:00 A.M.

at the rate of basic pay plus a night pay differential amounting to 10 percent of the rate of basic pay.

3) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.

gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)}

When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of

Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

SOW

Solicitation Number:

STATEMENT OF WORK

FOR

108 WING

COMPRESSORS / BREATHABLE AIR SYSTEMS AND EQUIPMENT HANGAR 3333, 3335, 3336

108TH WING (ANG)

3327 CHARLES BOULEVARD

JOINT BASE MCGUIRE-DIX-LAKEHURST NJ 08641

FY 2013

RECORD OF REVISION

STATEMENT OF WORK

1.0.

INTRODUCTION

1.1. Contractor must be certified to perform service of the following equipment. Contractor must provide written proof of certification to the 108th contracting officer prior to being awarded contract.

1.2. Service non personnal, to furnish all labor, tools. parts. materials, transportation and emergency service calls (within 24 hour window) necessary to service the following listed equipment annotated in section 2.0. below.

1.3. Service, inspect and maintain the following equipment (Perform quarterly, semi-annual and annual servicing as listed in section 2.0. below)

a) I/R Model SSR-HP100, s.n: CK1156U98240, Rotary Screw Air Compressor- bldg. 33-36

b) I/R Model DXR-600, s/n: 98GDXR3100, Refrigerated Air Dryer- bldg. 33-36

c) Deltech Model 8DM50, s/n: 952M156, DelMonox Breathing Ari System- bldg.33-36 d.) Kaeser Model KCF200 Oil Water Separator- bldg. 33-36 e.) I/R Model 100-HH-SP, s/n: N0567U95080, Rotary Screw Air Compressor-bldg.33-33 f.) Kaeser Refrigeration Air Dryer Model TE-141-bldg.33-33 g.) Kaeser Model KCF200 Oil Water Separator- bldg. 33-33 h.) I/R Model T30, s/n: 30T772555, Number 7100E15 Air Compressor-bldg. 33-35 i.) I/R Model DXR-550 s/n 952DXR0945 Refrigerated Air Dryer- bldg. 33-35

Amended To Include:

j.)

Brinks Air Compressor Model : 4 Piston, Model Number: 33-552, Serial No. 4110-4, 792799 LS Bldg: 33-21.

k.) Brinks Tank, Model 118741, 10 Horse Power, 280-230/460 Volt, Bldg: 33-21

2.0. SCOPE

2.1.

108th WG (ANG) requires contractor to inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to this statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly, semi-annual and annual services to include parts and labor of scheduled maintenance to include unscheduled maintenance visits. Unscheduled maintenance visits will be performed during normal business hours Monday to Thursday, by trained individuals certified to perform service on the below listed equipment. All unscheduled services, emergency calls and parts will be billed using invoices. No emergency calls or labor will meet or exceed the $2,900.00 threshold. All invoices will be paid via WAWF.

1.) I/R Model SSR-HP100, s/n : CK1156U98240, Rotary Screw Air Compressor- bldg. 33-36 a.) Lubricate replacement as required semi-annually.

b.) Replace oil filter semi-annually.

c.) Replace inlet filter semi-annually.

2.) I/R Model DXR-600, s/n: 98GDXR3100, Refrigerated Air Dryer- bldg. 33-36 a.) Service blow out coolers quarterly.

b.) Clean condensers quarterly.

c.) Check drains for operation quarterly.

3.) Deltech Model 8DM50, s/n: 952M156, DelMonox Breathing Ari System- bldg.33-36 a.) Replace carbon filter quarterly.

b.) Replace catalyst vessel annually.

c.) Replace coalescing element quarterly.

d.) Replace particulate element quarterly.

e.) Calibrate CO Monitor quarterly.

4.) Kaeser Model KCF200 Oil Water Separator- bldg. 33-36 a.) Replace KCF element semi-annually.

5.) I/R Model 100-HH-SP, s/n: N056U95080, Rotary Screw Air Compressor- bldg. 33-33 a.) Lubricate replacement as required semi-annually.

b.) Replace oil filter semi-annually.

c.) Replace inlet filter semi-annually.

6.) Kaeser Model KCF200 Oil Water Separator- bldg. 33-33 b.) Replace KCF element semi-annually.

7.) I/R Model TE-141, Refrigerator Air Dryer, Rated Capacity AT Inlet Conditions: 550SCFM.

d.) Service blow out coolers quarterly.

e.) Clean condensers quarterly.

f.) Check drains for operation quarterly.

8.) I/R Model T30, s/n: 30T772555, Number 7100E15 Air Compressor-bldg. 33-35

Amended To Include:

9.) Brinks Air Compressor Model : 4 Piston, Model Number: 33-552, Serial No. 4110-4, 792799 LS

Bldg: 33-21.

a.) Lubricate replacement as required semi-annually.

b.) Replace oil filter semi-annually.

c.) Replace inlet filter semi-annually.

10.) Brinks Tank, Model 118741, 10 Horse Power, 280-230/460 Volt, Bldg: 33-21 a.) Clean condensers quarterly.

b.) Check drains for operation quarterly.

11.) Perform overall operational checks of above listed equipment quarterly.

3.0.

PRINCIPAL POINTS OF CONTACT

3.1.

Principal points of contact for this project:

MSgt Eugene Fletcher (609) 754-4988 MSgt Curtis Thivierge (609) 754-4987

MSgt Russell Howarth (609) 754-4355 CMSgt George Williams (609) 754-4477

CMSgt Michelle Evans (609) 754-4981 Amended To Include Bldg: 33-21:

TSgt. Bryan Gregor (609) 754-4600

COMPRESSOR, DRYER & AIR MAINTENANCE

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

AIR COMPRESSOR: INGERSOL-RAND MODEL-100HHSP CK1156U98240 ROTARY SCREW AIR COMPRESSOR

(POC TSgt Fletcher, Bldg 3336, 609-754-3704)

FOB: Destination

PURCHASE REQUEST NUMBER: F8G2MG2236A004

SIGNAL CODE: a

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

REFRIGERATOR AIR DRYER MODEL: INGERSOL-RAND DXR-600 S/N 98GDXR3100

(POC TSgt Fletcher, Bldg 3336, 609-754-3704)

FOB: Destination

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

AIR COMPRESSOR MODEL DELTECH 8DM50, SN: 952M156, DELMONOX BREATHING AIR SYSTEM (POC TSgt Fletcher, Bldg 3336, 609-754-3704)

FOB: Destination

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

nspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance KAESER MODEL KCF200 OIL WATER SEPARATOR (POC TSgt Fletcher, Bldg 3336, 609-754-3704)

FOB: Destination

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

INGERSOL-RAND 100-HH-SP, SN: N056U95080, ROTARY SCREW AIR COMPRESSOR (POC MSgt Howarth, Bldg 3333, 609-754-4355)

FOB: Destination

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

KAESER MODEL KCF200 OIL WATER SEPARATOR (POC MSgt Howarth, Bldg 3333, 609-754-4355)

FOB: Destination

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance INGERSOL-RAND T3-141, REFRIGERATOR AIR DRYER, RATED CAPACITY AT INLET CONDITIONS: 550SCFM (POC MSgt Howarth, Bldg 3333, 609-754-4355)

FOB: Destination

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance INGERSOL-RAND T30, SN: 30T772555, # 7100E15 AIR COMPRESSOR (POC CMSgt Evans, Bldg 3335, 609-754-4981)

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance BRINKS AIR COMPRESSOR MODEL: 4 PISTON, MODEL # 33-552, SN: 4110-4, 792799 LS (POC TSgt Gregor, Bldg 3321, 609-754-4600)

NET AMT

COMPRESSOR, DRYER & AIR MAINTENANCE

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance BRINKS TANK MODEL: 118741, 10 HORSE POWER, 280-230/460 VOLT (POC TSgt Bryan Gregor, Bldg 3321, 609-754-4600)

SIGNAL CODE: A

NET AMT

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

AIR COMPRESSOR: INGERSOL-RAND MODEL-100HHSP CK1156U98240 ROTARY SCREW AIR COMPRESSOR

(POC TSgt Fletcher, Bldg 3336, 609-754-3704)

NET AMT

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

REFRIGERATOR AIR DRYER MODEL: INGERSOL-RAND DXR-600 S/N 98GDXR3100

(POC TSgt Fletcher, Bldg 3336, 609-754-3704)

NET AMT

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

AIR COMPRESSOR MODEL DELTECH 8DM50, SN: 952M156, DELMONOX BREATHING AIR SYSTEM (POC TSgt Fletcher, Bldg 3336, 609-754-3704)

NET AMT

FFP

nspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance KAESER MODEL KCF200 OIL WATER SEPARATOR (POC TSgt Fletcher, Bldg 3336, 609-754-3704)

NET AMT

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

INGERSOL-RAND 100-HH-SP, SN: N056U95080, ROTARY SCREW AIR COMPRESSOR (POC MSgt Howarth, Bldg 3333, 609-754-4355)

NET AMT

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance

KAESER MODEL KCF200 OIL WATER SEPARATOR (POC MSgt Howarth, Bldg 3333, 609-754-4355)

NET AMT

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance INGERSOL-RAND T3-141, REFRIGERATOR AIR DRYER, RATED CAPACITY AT INLET CONDITIONS: 550SCFM (POC MSgt Howarth, Bldg 3333, 609-754-4355)

NET AMT

FFP

Inspect and perform required maintenance to maintain the below listed equipment in a serviceable condition. Serviceable condition, as it applies to the statement of work includes, the equipment successfully passes all military and technical orders (T.O.) inspections. Maintain and perform the following quarterly services to include parts & labor of scheduled maintenance INGERSOL-RAND T30, SN: 30T772555, # 7100E15 AIR COMPRESSOR (POC CMSgt Evans, Bldg 3335, 609-754-4981)

NET AMT

FFP

Inspect and perform required…