SharkGrip.pdf

111.32

H&C®

SHARKGRIP

SLIP RESISTANT ADDITIVE

CHARACTERISTICS

Melting Point (ASTM D-127): 330-335F Particle Size: 160-180 microns

CAUTION

Limitations:

H&C® SharkGrip Slip-Resistant Additive will increase the coefficient of friction on the surface of a paint, but due to its small particle size, the coating that this is added to should be considered slip-resistant but not non-skid.

ORDERING INFORMATION

Part Number 3.2oz 50.055004 16oz 50.055005

SMIS

3.2oz 107-8732 16oz 107-8740

CHARACTERISTICS

H&C® SharkGrip Slip-Resistant Additive is a micronized polymer for addition to H&C coatings for slip resistance, fine texturing, and gloss reduction. Due to its low oil absorption and high solvent resis-tance, it will stir easily into most oil-based and latex-based paints and other coat-ings with minimal effect on the coating’s viscosity. Its low density allows it to stay well suspended in thin materials such as stains.

Features:

• Can be added to paints, stains, and sealers

• Add to latex-based, oil-based and epoxy coatings

• Spherical-shaped particles allow easy cleaning of the surface

• Spherical-shaped particles provide a smoother feel under foot when used on pool decks and patios

Benefits:

• slip resistance

• easy addition into paints and stains

• good chemical and abrasion resis-tance

• good universal compatibility without vis-cosity effects

CAUTION

H&C™ SharkGrip® Slip-Resistant Ad-ditive is not hazardous and does not contain silica, but should be treated as a nuisance dust while incorporating it into its intended vehicle. It is recommended that when mixing into unfamiliar coat-ings, a small test batch and application be made.

Not for use on wood stains.

10/2010