Pre-Proposal_RFIs_-_Bldg._45_Epoxy_Floors.docx

QUESTIONS AND ANSWERS RELATED TO:

W912JB-19-R-5022

Epoxy Floor B45 as of 13 Aug 2019

Dated: 13 Aug 2019

Q1. List of all Manufacturer product used on the last job A1. Information not available. It’s been an estimated 20+ years since the floors were last worked on.

Q2. Name of last Contractor who painted the floor A2. Information not available.

Q3. What epoxy manufacturer is Selfridge currently spec’d in with?

A3. Selfridge does not have an epoxy specification; however, the scope of work details the product that is the basis for design. Additionally, it should be noted that the area that is to be epoxied is an industrial area that is exposed to engine oil, diesel fuel, hydraulic fluids, and other industrial chemicals and solvents. It is also expected that a range of colors will be made available upon award.

Q4. Are there any available pictures of the facility?

A4. See attached Q5. The repair of the metal grates, what condition are they in?

A5. See attached photo.

Q6. Will the grates need to be sandblasted, coated or repaired/rebuilt?

A6. Grates are corroded and shall undergo repair/corrosion removal, priming, and coating as a part of this effort. It should also be noted that the diamond plate thresholds will require a similar treatment, the only difference is that they will receive a coating scheme which emulates their current paint scheme.

Q7. With the 5,400 sq. ft. of coating, does this include the wash bays or is that additional space?

A7. Please see the drawing for the area of work, which includes the entry, north and south maintenance bays, maintenance bays 1 & 2, and the wash rack. Total area to be epoxied is listed on the drawing. Approximately 6519 S.F.