Questions and Answers.pdf

Fiber Laser Cutter

W912HZ23Q0010

Questions and Answers

QUESTION 1: "Must fit within a floor footprint of 48” (inch) by 96” (inch) (not including auxiliary filtration or assist gas supply requirements)" ---- Does this mean that the floor area of the machine is 48*96 inches (excluding dust collectors and air compressors, etc.)?

ANSWER 1: The space limitation of the machine must fit in no larger than 48” x 96”. A separate filtration system does not need to fit in the same area. It can be moved separately to the side.

QUESTION 2. Does the HEPA is the brand of dust collection system your customer want?

ANSWER 2: HEPA is a type of filtration system not a brand. HEPA filter = high efficiency particulate air filter.

QUESTION 3. Regarding the size and thickness of the sheet and pipe, you told me the smallest size.

Could you kindly tell me what is the maximum area and maximum thickness of the flat sheet your customer needs to cut? Could you kindly tell me what is the maximum diameter and thickness of the pipe that your customer needs to cut? And could you kindly tell me the weight of a single tube?

ANSWER 3: There is not maximum area or thickness limitation. There is no maximum diameter or thickness limitation. There is no minimum or maximum to identify for tingle tubes.

QUESTION 4. "Must operate from a standard 110VAC 20A 60Hz power outlet“ ---- I need to confirm with you does this is your customer's requirement for the power supply? I confirmed with our engineer that if this is your customer's power requirement, he/she needs a transformer.

ANSWER 4: Must operate from a standard 120vac wall plug.