B08.03_Solicitation Amendment W912HZ23Q0010.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to update the Description of Requirements (DOR) in Section C. All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 13-Mar-2023

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912HZ23Q0010

X 9B. DATED (SEE ITEM 11)

23-Feb-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

13-Mar-2023

CODE

ERDC CONTRACTING OFFICE

3909 HALLS FERRY ROAD

VICKSBURG MS 39180-6199

W912HZ 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912HZ23Q0010

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION A - SOLICITATION/CONTRACT FORM

The required response date/time has changed from 06-Mar-2023 04:00 PM to 20-Mar-2023 04:00 PM.

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

DESCRIPTION OF REQUIREMENTS

Fiber Laser Cutter Description of Requirement (DOR)

The U.S. Army Engineer and Development Center (ERDC), Information Technology Laboratory (ITL) has a requirement to purchase a FabLight 4500 with add ons OR EQUAL. The hardware and software should come with a 2-year warranty and the following factory integrated components. All shipping costs should be included.

The hardware shall have the following components:

HARDWARE SPECIFICATION:

ID Product Quantity

Fiber Laser Cutter with the following salient characteristics Must be a fiber laser cutter (not a CO2 laser) Laser must be minimum 4.5 kW (4500W) Must support both material through cutting and surface engraving (both raster and vector) Must be capable of cutting both flat sheet material and round, square, and rectangular tubing Must cut a minimum of 24” (inch) by 48” (inch) flat sheet material Must cut a minimum of ¼ (0.250)” (inch) thick flat sheet steel material Must cut a minimum of 3/16 (0.188)” (inch) thick flat sheet aluminum and stainless steel material Must include an integrated rotary 4th axis with 4-jaw chuck for tubing

(round, square, and rectangular) with a capacity of up to 2” (inch) Must cut a minimum of 72” (inch) long by 2” (inch) diameter by 1/8

(0.125)” (inch) wall thickness round, square, and rectangular tube stock (steel, aluminum, and stainless steel)

Must include a self-contained HEPA dust collection system (no external ventilation system required) – may be a separate filtration system (not required to be integrated in the main laser cutter system)

Must support high pressure (up to 250 psi) clean dry air or nitrogen assist gas

Must fit within a floor footprint of 48” (inch) by 96” (inch) (not including auxiliary filtration or assist gas supply requirements)

Must operate from a standard 110VAC 20A 60Hz power outlet Must allow tubes up to 80” for material efficiency Must contain 2 replacement laser nozzles for cutting head Must contain 6 replacement laser windows

W912HZ23Q0010

Must contain 5 replacement filters for use with HEPA dust collection system

Delivery

Estimated delivery is 16 weeks after award. All components shall be delivered to the Engineer Research and Development Center (ERDC) at 3909 Halls Ferry Road, Vicksburg, MS 39180.

(End of Summary of Changes)