A.02.01_W912HN18Q5001_(Amended_1).pdf

COMBINED SYNOPSIS/SOLICITATION

This notice is being posted as an avenue to provide Request for Quotes, W912HN18Q5001. This is a combined synopsis/solicitation for commercial supply prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. THIS ANNOUNCEMENT

CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A

WRITTEN SOLICITATION WILL NOT BE ISSUED. This procurement will be 100% set aside for only Small Businesses. The North American Industry Classifications System (NAICS) is 483212 with a small business size standard of 500 employees. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-96.

Title of Requirement: Jacksonville Harbor Marine Lift Boat

Description of Requirement: The Contractor shall supply and deliver a self-propelled lift-vessel capable of operating within 50-feet of water in order to support drilling operations within Jacksonville Harbor for use by the Savannah District Geology Section within 59 73 days from award of contract. The purpose for using a lift-vessel is to provide a safe, stable, work platform for USACE drilling crews while drilling operations are underway. The lift-vessel shall be fully manned and capable of supporting drilling operations along the St. Johns River within the port of Jacksonville, FL.

Submission Requirements: Quotes should be E-mailed to Mr. Gerard F. Leo at gerard.f.leo@usace.army.mil by 11:00 a.m. 1:00 p.m. Eastern Time on 3 5 12 January 2018. Please courtesy copy, Mr. Bruce Helms at bruce.a.helms@usace.army.mil.

Basis for Award: The award will be made to the lowest priced, technically acceptable, responsible, responsive quote, with a responsibility determination. This is in accordance with Federal Acquisition Regulations (FAR) 52.212-2, Evaluation – Commercial Items, and FAR 9.104.

The Government reserves the right to cancel this solicitation.

mailto:gerard.f.leo@usace.army.mil mailto:bruce.a.helms@usace.army.mil

US Army Corps of Engineers – Savannah District Point of Contact: Gerard F. Leo

Phone: (912) 652-5770 Email: gerard.f.leo@usace.army.mil

Please complete the following form in addition to the price quote on page 4.

CONTRACTOR: _____________________________________________________________

DUNS NO.: _____________________________________________________________

CAGE CODE: _____________________________________________________________

TAX ID NO.: _____________________________________________________________

E-MAIL: _____________________________________________________________

PHONE NO.: _____________________________________________________________

DATE OF QUOTE: ___________________________________________________________

I certify that by submission of this quote, I am able to perform all tasks as required by the Statement of Work (SOW).

Quote Prepared By:

(Printed Name and Title) (Signature)

The Contractor certifies by signing this document that it understands and will comply with the requirements listed in the Statement of Work (SOW) and shall provide equipment meeting or exceeding the requirements.

Notes to Offeror

Note 1: Quotes shall meet the Technical Requirements to be eligible for an award. PARTIES INTERESTED IN RESPONDING TO THIS RFQ may submit their Quote in accordance with standard commercial practice (i.e. Quote form, letterhead, etc.) and MUST INCLUDE THE FOLLOWING INFORMATION: Solicitation number; offeror’s complete mailing and remittance addresses; discount terms, DUNS number, and Tax Identification Number. Any prospective awardee shall be registered and active in the System Award Management (SAM) database prior to award of a contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. Offerors may obtain information on registration and annual confirmation requirements via the Internet at http://www.acquisition.gov or by calling 866-606-8220.

Note 2: All questions are to be directed no later than 11:00 a.m. Eastern Time three days prior to quote due date to Gerard Leo at gerard.f.leo@usace.army.mil. Please courtesy copy, Mr. Bruce Helms at bruce.a.helms@usace.army.mil.

Note 3: The Taxpayer Identification Number may be used by the Government to collect and report on any delinquent amounts arising out of the contractor’s relationship with the Government.

Note 4: The completed Offeror Representations and Certifications-Commercial Items (FAR 52.212-3) or Notation that company is registered in SAM (https://www.sam.gov) must be submitted along with each Quote.

Note 5: This acquisition will utilize Simplified Acquisition Procedures pursuant to FAR 13.5.

Note 6: In Section B – Supplies or Services and Prices please provide BOTH the Unit Price and Total Amount. The Unit price and Total amount values shall not exceed two decimal points. Prices should be provided in the following format: EXAMPLE - $1.50.

http://www.acquisition.gov/ https://www.sam.gov/

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Lift Boat Mobilization/Demobilization

In accordance with the Statement of Work (SOW)

FOB: Destination

NET AMT

0002 54 Days Lift Boat Platform Work Days

In accordance with the Statement of Work (SOW), Contractor will be paid based on daily rate used for project. The numbers of days is estimated based on the current Government needs. These needs may change during the performance based on drilling data.

0003 10 Days Lift Boat Weather Days on daily rate used for project. The numbers of days is estimated based on the current Government needs. These needs may change during the performance based on drilling data.

0004 9 Days Lift Boat Off Days on a daily rate. The number of days is estimated based on the current Government needs. These needs may change during performance based on drilling data.

0005 54 Days Crew Boat Rental on a daily rate. The number of days is estimated based on the current Government needs. These needs may change during performance based on drilling data.

Total Amount of All Line Items (0001-0005): $______________________________

Section C - Descriptions and Specifications

STATEMENT OF WORK

SCOPE OF WORK

JACKSONVILLE HARBOR DEEPENING PROJECT

CORE BORINGS 2018

MARINE LIFT VESSEL

1. Description of Services: The Contractor shall provide a self-propelled lift vessel capable of operating within

50-feet of water in order to support drilling operations within Jacksonville Harbor. The purpose for using a lift vessel is to provide a safe, stable, work platform for USACE drilling crews while drilling operations are underway. The lift vessel shall be fully manned and capable of supporting drilling operations along the St.

Johns River within the port of Jacksonville, FL. The estimated number of days to complete the drilling mission, including weather delays, is 59 73 days; this does not include the time to mobilize the vessel to Jacksonville, FL. The estimated number of days may change depending on Government needs. The Contractor shall also supply a crew boat to transport the drilling crew and any supplemental supplies to and from the lift vessel and a crane capable of lifting up 25,000 lbs. to load and unload drill rig and supplies. The Contractor will supply adequate dock space to load and unload necessary supplies and equipment for use in the contract.

The Contractor shall be responsible for securing the drilling rig to the vessel using a certified welder, if needed.

A rod-trough that extends beyond the bow of the vessel shall be constructed to accommodate rod string lay-downs during drilling operations. The Contractor shall provide sufficient working area around the drill rig to allow the crew to safely conduct drilling operations; this may require construction of additional deck space.

2. Site Information: Site maps, navigation charts and bathymetric maps may be acquired from the Savannah

District, Geology Section. Point of Contact for is Mr. William McIntosh, please see paragraph 15 for contact information.

Historical tide data can be acquired from the NOAA Tides and Currents website;

https://tidesandcurrents.noaa.gov/noaatidepredictions.html?id=8720218.

Borehole coordinates will be provided by the Savannah District for navigational purposes. Hard copy maps can be made available upon request.

3. Lift-Vessel Requirements: The lift vessel shall be self-propelled, be capable of jacking up a minimum of 50-feet above the seafloor, and have a moon-pool to allow the drill string to be lowered through the deck to the seafloor. The lift vessel must be able to navigate and jack up between tide changes. The St. Johns River often has current speeds up to 2.5 knots between tide changes. Onboard water pump, electrical generation, and crane capacity is required. The vessel shall be in compliance with established US Coast Guard guidelines and regulations.

The Contractor shall provide a crew boat capable of safely transporting the drilling crews and any supplemental supplies safely from the dock to the lift vessel moored offshore. Crew will be transported from the mainland and returned after daily drilling activities each day.

4. Work Day: The Contractor shall ensure that the vessel and crew are prepared to conduct 12-hour operations.

One (1) USACE drilling crew will conduct 1-drilling shift within a 12-hour period. One drilling shift shall consist of a ten (10) hour day, with two hours allocated for transport on and off the vessel by a crew boat.

5. Survey and Elevations: The Contractor shall provide HYPACK capability a high-accuracy GPS capable of positioning the moon pool/drilling stem within < 2 ft. of target coordinates to assist with navigation and locating of the borings, and ocean floor depth. All horizontal locations shall be given in FL state plane international feet coordinates referenced to North American Datum 1983. Any vertical elevation corrections will be referenced to Mean Lower Low Water.

https://tidesandcurrents.noaa.gov/noaatidepredictions.html?id=8720218 https://tidesandcurrents.noaa.gov/noaatidepredictions.html?id=8720218

6. Safety: Safety of all parties is a major concern. The drilling work is to have a no effect on navigation and must comply with all requests from the Coast Guard and the Port Captain. The Contractor shall submit an Activity Hazard Analysis to the Savannah District Safety Officer for potential hazards associated in operating a lift vessel within the navigation channel in offshore environments. The USACE drilling agency, in turn, shall comply with guidance established in the Corps of Engineers Safety Manual, EM 385-1-1, dated 30 NOV 2014.

All personnel shall be properly clothed and protected for working on the water. As a minimum, hard hat, steel toed safety boots, personal flotation devices, eyewear, and hearing protection will be utilized. Drinking water will be on hand to prevent dehydration. The Savannah District reserves the right to halt drilling operations for any safety violations. The Savannah District Safety Officer is Ms. Kathleen Campbell-Miles, please see paragraph 15 for contact information.

7. Drilling Operations: The lift-vessel provider shall be able to set up on 40 52 primary boring locations identified in Table 1 and Plates 1-35 within and around the shipping channel of Jacksonville Harbor. Up to 15 additional adjacent “companion” borings are also expected for a total of up to 55 67 boring locations over which the lift-vessel operator shall be required to position the vessel and lift the work platform and vessel above the water surface prior to commencement of drilling. The work shall be conducted in such a manner that does not adversely impact navigation in the shipping channel. For technical questions contact Mr. William McIntosh or Steven Widincamp, please see paragraph 15 for contact information.

8. Borings: Drilling shall be performed at the coordinates provided in Table 1, shown on attached Plates 1-35, or as directed by the Government. 15 additional “companion” borings are expected at locations adjacent to 15 of the primary boring locations. Each boring is to be advanced using either a full drilling rig or skid rig, whichever is deemed more appropriate by the Government. If a drilling rig is used from a wheeled vehicle, a heavy duty cradle will need to be constructed in order to provide support for the rig, tower, drill stem and torque generated during the drilling process. Maximum depth of penetration into the river bottom is no-less than -55 feet MLLW.

Point of Contact for the drilling rig and cradle design is Mr. Steve Widincamp, please see paragraph 15 for contact information.

9. Inclement Weather: Inclement weather is defined as rough weather and water conditions that hamper or prevent safe drilling as determined by the lead driller and inspector, or vessel navigation as determined by the lift-vessel Captain. Inclement weather time, in increments of hours, shall be determined by the drilling agency’s inspector and lift-vessel Captain. If inclement weather threatens the safety of the vessel and all aboard, the lift-vessel Captain has the authority to declare cessation of drilling operations, raise the spuds, and conduct expedient movement to the nearest harbor shelter. Inability for the vessel to mobilize to boring locations due to any NOAA Tropical Weather Warnings will not be will be considered an extreme weather event and will not be paid as down time.

10. Captain’s Responsibility: The Captain of the lift vessel shall be responsible for the lift vessel and the safe transportation of personnel and equipment on it. He shall make determinations relevant to the efficient and safe navigation, operation, and docking of vessels. He shall cooperate with the driller in setting up on the proposed drilling location as directed by the driller or onboard geologist. He shall make determinations as to safety of his vessels during inclement weather and for setting up in the river, high water conditions, rough seas, or fast currents at the drill site. An initial kick-off meeting with the lift-vessel captain, USACE representatives, and local harbor pilots shall be required to identify boring locations which could potentially pose an issue for continued shipping navigation during setup or drilling and mitigate any potential conflicts prior to commencement of drilling operations.

11. Weekly Status Reports: During the work period of the task order a weekly progress teleconference shall be conducted. Participants shall include a person from the drilling agency, lift-vessel Captain (pending duties) and the on board geologist. The call is to provide a brief oral overview of the activities for the previous week. This time may also be used to discuss potential problems and solutions related to contract performance or conditions that might affect performance.

12. Schedule: The schedule for this work is as follows:

• Begin drill work in Entrance Channel: January 16 18, 2018.

• Finish Drill work in Entrance Channel: 59 73 days from start of drilling operations.

13. Coordination: The principal Savannah District technical point of contact for this contract is Mr. Steven Widincamp. Submittals shall be made to Mr. Widincamp via email, please see paragraph 15 for contact information.

14. Bids: Contractor bid shall include daily rate for mobilization, work days, weather days, crew boat rental and off days. Contractor will be paid based on daily rate used for project since the overall numbers of days is estimated based on the current customer needs. Customer needs may change during the course of the project based on drilling data. Work days, off days and weather days not utilized by the government will not be paid to the contractor.

15. Points of Contact:

Savannah District, Technical Lead Name: William McIntosh Title: Chief, Geology Section Email: william.o.mcintosh@usace.army.mil Phone: (912) 652-5669

Technical POC (Alternate) Name: Steve Widincamp Email: steven.d.widincamp@usace.army.mil Phone: (912) 652-5670

Savannah District Safety Officer Name: Kathleen Campbell-Miles Email: kathleen.a.campbell-miles@usace.army.mil Phone: (912) 652-5726

Savannah District, Contracting Officer:

Name: Bruce Helms Title: Contracting Officer Email: bruce.a.helms@usace.army.mil Phone: (912) 652-6147

16. Drilling Target Coordinates: See Table 1, below.

mailto:william.o.mcintosh@usace.army.mil mailto:steven.d.widincamp@usace.army.mil mailto:kathleen.a.campbell-miles@usace.army.mil

W912HN18Q5001

Table 1. Proposed Target Borings (Revised)

Boring Designation

FL East NAD83 Geographic NAD83 Elevation

MLLW

Target Elevation

MLLW

Boring Depth feet

Location x y Latitude Longitude

CB-JH18-01 479014 2200296 30.3847575 ‐81.5618346 -43.5 -60 -16.5 Channel CB-JH18-02 479415 2200617 30.3856456 ‐81.5605679 -43.2 -60 -16.8 Channel CB-JH18-03 479624 2200095 30.3842132 ‐81.5598969 -43.5 -60 -16.5 Channel CB-JH18-04 480160 2200386 30.3850206 ‐81.5582016 -43.4 -60 -16.6 Channel CB-JH18-05 480526 2200624 30.3856799 ‐81.5570446 -43.7 -60 -16.3 Channel CB-JH18-06 480815 2199975 30.3838994 ‐81.5561180 -43.9 -60 -16.1 Channel CB-JH18-07 481454 2200508 30.3853735 ‐81.5540998 -43.5 -60 -16.5 Channel CB-JH18-08 483883 2200700 30.3859338 ‐81.5463995 -43.4 -60 -16.6 Channel CB-JH18-09 485060 2200616 30.3857184 ‐81.5426655 -33.5 -60 -26.5 Turning Basin CB-JH18-10 485494 2200444 30.3852512 ‐81.5412865 -13.7 -60 -46.3 Turning Basin CB-JH18-11 486061 2200343 30.3849810 ‐81.5394868 -6.5 -60 -53.5 Turning Basin CB-JH18-12 486688 2201485 30.3881291 ‐81.5375155 -43 -60 -17 Turning Basin CB-JH18-13 487045 2201249 30.3874848 ‐81.5363798 -41.3 -60 -18.7 Channel CB-JH18-14 487394 2201034 30.3868982 ‐81.5352697 -32.4 -60 -27.6 Turning Basin CB-JH18-15 488697 2201394 30.3879049 ‐81.5311427 -43.4 -60 -16.6 Channel CB-JH18-16 493553 2202174 30.3901112 ‐81.5157533 -42.6 -55 -12.4 Widener CB-JH18-17 495766 2202990 30.3923823 ‐81.5087463 -43.9 -55 -11.1 Channel CB-JH18-18 496082 2202712 30.3916219 ‐81.5077401 -45 -55 -10 Channel CB-JH18-19 496511 2202443 30.3908876 ‐81.5063757 -44 -55 -11 Channel CB-JH18-20 497048 2202563 30.3912241 ‐81.5046743 -43 -55 -12 Widener CB-JH18-21 499424 2202645 30.3914784 ‐81.4971397 -40.3 -55 -14.7 Channel CB-JH18-22 499886 2201769 30.3890754 ‐81.4956623 -42.8 -55 -12.2 Widener CB-JH18-23 500065 2202699 30.3916346 ‐81.4951075 -43 -55 -12 Channel CB-JH18-24 501570 2202688 30.3916224 ‐81.4903341 -42.8 -55 -12.2 Widener CB-JH18-25 502621 2202863 30.3921160 ‐81.4870031 -43 -55 -12 Channel CB-JH18-26 505303 2203292 30.3933270 ‐81.4785026 -29 -55 -26 Widener CB-JH18-27 506001 2203013 30.3925680 ‐81.4762850 -25 -55 -30 Widener CB-JH18-28 507618 2202326 30.3906977 ‐81.4711474 -33.6 -55 -21.4 Widener CB-JH18-29 508004 2202554 30.3913290 ‐81.4699262 -43.6 -55 -11.4 Channel CB-JH18-30 508089 2201929 30.3896115 ‐81.4696484 -33.1 -55 -21.9 Widener CB-JH18-31 508526 2202067 30.3899959 ‐81.4682642 -42.4 -55 -12.6 Channel CB-JH18-32 511354 2200056 30.3844984 ‐81.4592692 -49.8 -55 -5.2 Widener CB-JH18-33 511935 2198962 30.3814969 ‐81.4574126 -41 -55 -14 Widener CB-JH18-34 513264 2199169 30.3820808 ‐81.4532006 -38.4 -55 -16.6 Widener CB-JH18-35 514283 2199116 30.3819462 ‐81.4499684 -39 -55 -16 Widener CB-JH18-36 515735 2199619 30.3833450 ‐81.4453699 -32.2 -55 -22.8 Widener CB-JH18-37 516704 2200061 30.3845707 ‐81.4423023 -27 -55 -28 Widener CB-JH18-38 517143 2200572 30.3859804 ‐81.4409164 -31.5 -55 -23.5 Widener CB-JH18-39 517514 2200986 30.3871227 ‐81.4397449 -36.4 -55 -18.6 Widener CB-JH18-40 517879 2201380 30.3882099 ‐81.4385921 -39.1 -55 -15.9 Widener CB-BIMCT17-1 490714.3 2205848.7 30.4001800 -81.5248100 NA NA -20 Channel CB-BIMCT17-2 491693.3 2205263.1 30.3985800 -81.5217000 NA NA -20 Channel CB-BIMCT17-3 492441.8 2204980.4 30.3978100 -81.5193200 NA NA -20 Channel CB-BIMCT17-4 492559.7 2204553 30.3966400 -81.5189400 NA NA -20 Channel

CB-BIMCT17-5 493000 2204575.6 30.3967100 -81.5175400 NA NA -20 Channel CB-BIMCT17-6 493351.8 2204021.7 30.3951900 -81.5164200 NA NA -20 Channel CB-BIMCT17-7 493580.5 2203643.3 30.3941500 -81.5156900 NA NA -20 South of Channel CB-BIMCT17-8 493712.5 2203407.3 30.3935100 -81.5152700 NA NA -20 South of Channel CB-BIMCT17-9 493964.6 2204049.2 30.3952700 -81.5144700 NA NA -20 Channel CB-BIMCT17-10 494467.7 2204171.1 30.3956100 -81.5128800 NA NA -10 Navy Point CB-BIMCT17-11 494943.4 2203778.9 30.3945400 -81.5113700 NA NA -10 Navy Point CB-BIMCT17-12 494500 2203311.8 30.3932500 -81.5127600 NA NA -20 Channel

WAGE DETERMINATION

The contractor must adhere to all applicable SCA Wage Determinations. The following wage determinations are applicable and can be found in full text at www.wdol.gov.

WD 15-4539 (Rev.-3) was first posted on www.wdol.gov on 08/01/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4539 Daniel W. Simms Division of | Revision No.: 3 Director Wage Determinations| Date of Revision: 07/25/2017 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Florida

Area: Florida Counties of Baker, Clay, Duval, Nassau, Saint Johns http://www.wdol.gov/ http://www.wdol.gov/ http://www.dol.gov/whd/govcontracts

MAPS

Section E - Inspection and Acceptance

CLAUSES INCORPORATED BY REFERENCE

52.246-4 Inspection Of Services--Fixed Price AUG 1996

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 16-JAN-2018 TO

09-MAR-2018

N/A GEOTECHNICAL & HTRW BRANCH

STEVEN WIDINCAMP

100 W. OGLETHORPE AVE.

SAVANNAH GA 31401

912-652-5670

W912HN

0002 POP 16-JAN-2018 TO

09-MAR-2018

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 16-JAN-2018 TO

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 16-JAN-2018 TO

N/A (SAME AS PREVIOUS LOCATION)

52.247-34 F.O.B. Destination NOV 1991

Section G - Contract Administration Data

252.204-7006 Billing Instructions OCT 2005

Section I - Contract Clauses

52.203-3 Gratuities APR 1984 52.203-12 Limitation On Payments To Influence Certain Federal Transactions OCT 2010

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper MAY 2011 52.204-13 System for Award Management Maintenance OCT 2016 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.204-19 Incorporation by Reference of Representations and Certifications. DEC 2014 52.204-21 Basic Safeguarding of Covered Contractor Information Systems JUN 2016 52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.229-3 Federal, State And Local Taxes FEB 2013 52.232-1 Payments APR 1984 52.232-4 Payments Under Transportation Contracts and Transportation-Related

Services Contracts

APR 1984

52.232-8 Discounts For Prompt Payment FEB 2002 52.232-11 Extras APR 1984 52.232-17 Interest MAY 2014 52.232-23 Assignment Of Claims MAY 2014 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.242-13 Bankruptcy JUL 1995 52.243-1 Alt I Changes--Fixed Price (Aug 1987) - Alternate I APR 1984 52.246-25 Limitation Of Liability--Services FEB 1997 52.247-21 Contractor Liability for Personal Injury and/or Property Damage APR 1984 52.249-4 Termination For Convenience Of The Government (Services) (Short Form) APR 1984 52.249-8 Alt I Default (Fixed-Price Supply and Service) (Apr 1984) - Alternate I APR 1984 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By The

Government of a Country that is a State Sponsor of Terrorism

OCT 2015

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7010 Levies on Contract Payments DEC 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel JUN 2013 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (NOV 2017)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L.

111-117, section 743 of Div. C).

XX (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

___ (10) [Reserved]

___ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

___ (ii) Alternate I (NOV 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

___ (ii) Alternate I (JAN 2011) of 52.219-4.

___ (13) [Reserved]

XX (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

___ (ii) Alternate I (NOV 2011).

___ (iii) Alternate II (NOV 2011).

___ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

XX (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

___ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)).

___ (ii) Alternate I (Nov 2016) of 52.219-9.

___ ( iii) Alternate II (Nov 2016) of 52.219-9.

___ (iv) Alternate III (Nov 2016) of 52.219-9.

___ (v) Alternate IV (Nov 2016) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

XX (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C.

657f).

XX (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

XX (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

XX (26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126).

XX (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

XX (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

XX (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

XX (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

XX (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

XX (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

XX (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

___ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693).

___ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (OCT 2015) of 52.223-13.

___ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

___ (41)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

XX (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O.

13513).

___ (43) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

___ (44) 52.223-21, Foams (June, 2016) (E.O. 13693).

___ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

___ (ii) Alternate I (JAN 2017) of 52.224-3.

___ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

___ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

___ (iv) Alternate III (May 2014) of 52.225-3.

___ (48) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

___ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

___ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

___ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

___ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

___ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

XX (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31 U.S.C. 3332).

___ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

___ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

___ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

___ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).

XX (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

XX (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).

XX (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

XX (8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

XX (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

___ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

___ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xii) XX (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xvii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xvi) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xvii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xviii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xix) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xx) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/ https://www.acquisition.gov/

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

http://farsite.hill.af.mil/

(b) The use in this solicitation or contract of any DFARS (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission

(IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

http://www.aimglobal.org/?Reg_Authority15459 http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description None

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description None

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item…