W912ES24Q0022 0001 Amendment 0001.pdf

W81G6733115451

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this solicitation amendment is to remove and replace the scope of w ork, remove and replace the Schedule of Services, make edits to FAR 52.212-2 Evaluation—Commercial Products and Commercial Services, update the Department of Labor Wage Determinations, and add "W912ES24Q0022 QA Services - Offeror Submission Form" as an attachment.

All other solicitation terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 59

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 23-Jan-2024

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912ES24Q0022

X 9B. DATED (SEE ITEM 11)

08-Nov-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

23-Jan-2024

CODE

CONTRACTING DIVISION

USACE, ST PAUL

332 MINNESOTA STREET

SUITE E1500

ST PAUL MN 55101-1323

W912ES 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912ES24Q0022

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

SCHEDULE OF SERVICES

LOCK AND DAM 5 ROUTINE GATE MAINTENANCE QA SERVICES

BASE PERIOD March 1, 2024 through February 28, 2025 CLIN Description QTY Unit Price Total Price 0001 Develop QA Inspection 1 0002 Submittal Reviews 35 0003 RFI Reviews 10 0004 General Condition Inspection & Travel 1 0005 NDT Inspection & Travel 1 0006 Repair Plan Inspection & Travel 1 0007 Roller Gate Coating & Painting Inspections & Travel 2

0008 Roller Gate Final Acceptance Inspection & Travel 1

0009 Bulkhead Repair Inspections & Travel 2 0010 Weekly Meetings (virtual) 26 0011 Final Inspection Reports 1 0012 Lead Abatement Inspections & Travel 2 0013 End Shield Fabrication Inspection 2

TOTAL BASE

OPTION PERIOD 1 March 1, 2025 through February 28, 2026 CLIN Description QTY Unit Price Total Price 1001 Develop QA Inspection 0 1002 Submittal Reviews 22 1003 RFI Reviews 10 1004 General Condition Inspection & Travel 2 1005 NDT Inspection & Travel 2 1006 Repair Plan Inspection & Travel 2 1007 Roller Gate Coating & Painting Inspections & Travel 4

1008 Roller Gate Final Acceptance Inspection & Travel 2

1009 Bulkhead Repair Inspections & Travel 0 1010 Weekly Meetings (virtual) 26

1011 Final Inspection Reports 2 1012 Lead Abatement Inspections & Travel 2 1013 End Shield Fabrication Inspection 2

TOTAL OPTION 1

OPTION PERIOD 2 March 1, 2026 through February 28, 2027

2001 Develop QA Inspection 0 2002 Submittal Reviews 22 2003 RFI Reviews 10 2004 General Condition Inspection & Travel 2 2005 NDT Inspection & Travel 2 2006 Repair Plan Inspection & Travel 2 2007 Roller Gate Coating & Painting Inspections & Travel 4

2008 Roller Gate Final Acceptance Inspection & Travel 2

2009 Bulkhead Repair Inspections & Travel 0 2010 Weekly Meetings (virtual) 26 2011 Final Inspection Reports 2 2012 Lead Abatement Inspections &Travel 2 2013 End Shield Fabrication Inspection 2

TOTAL OPTION 2

OPTION PERIOD 3 March 1, 2027 through February 29, 2028

3001 Develop QA Inspection 0 3002 Submittal Reviews 22 3003 RFI Reviews 10 3004 General Condition Inspection & Travel 2 3005 NDT Inspection & Travel 2 3006 Repair Plan Inspection & Travel 2 3007 Roller Gate Coating & Painting Inspections & Travel 4

3008 Roller Gate Final Acceptance Inspection & Travel 2

3009 Bulkhead Repair Inspections & Travel 2 3010 Weekly Meetings (virtual) 26 3011 Final Inspection Reports 2 3012 Lead Abatement Inspections &Travel 2 3013 End Shield Fabrication Inspection 2

TOTAL OPTION 3

OPTION PERIOD 4 March 1, 2028 through February 28, 2029

4001 Develop QA Inspection 0 4002 Submittal Reviews 10 4003 RFI Reviews 10 4004 General Condition Inspection & Travel 0 4005 NDT Inspection & Travel 0 4006 Repair Plan Inspection & Travel 0 4007 Roller Gate Coating & Painting Inspections & Travel 0

4008 Roller Gate Final Acceptance Inspection & Travel 0

4009 Bulkhead Repair Inspections & Travel 0 4010 Weekly Meetings (virtual) 26 4011 Final Inspection Reports 0 4012 Lead Abatement Inspections &Travel 2 4013 End Shield Fabrication Inspection 0

TOTAL OPTION 4

TOTAL BASE AND ALL OPTIONS

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 29-Nov-2023 10:00 AM to 07-Feb-2024 10:00 AM.

The following have been modified:

NOTES TO QUOTERS

This section provides general guidance for preparing the quotation in response to this solicitation. The Quoter’s response to this solicitation must include all data and information requested herein in accordance with these instructions.

Price Proposal: This is the solicitation in its entirety. Quoter to complete the following:

• Standard Form 1449 Solicitation/Contract/Order for Commercial Items - Complete Blocks 17, and 30a/b/c

• Acknowledgement of Amendments – Complete only as necessary and provide signed copies of the Standard Form 30 Amendment of Solicitation/Modification of Contract with your quote.

• Price Quote– All pricing (unit, total, subtotal, grand total, etc.) must be in whole penny amounts.

Technical Documents: The technical submittal will be used by the Contracting Officer to determine the qualifications and capabilities of the firm to perform the required services and shall contain the information as required by FAR Clause 52.212-2. Ensure you address all factors to include submission of the Offeror Submission Form, and Attachment 1 Past Performance Questionnaire for Recent Relevant Experience projects if a CPARS final evaluation is not available for a project.

Submitting Quotes – All transmittals shall be submitted electronically to scott.e.hendrix@usace.army.mil and be clearly marked in the subject line of the email with the solicitation number, W912ES24Q0022. Quotes must be received no later than the date and time stated in the solicitation. Quotes received after the deadline are Late and may not be considered for contract award.

Questions – Vendors desiring an explanation or interpretation of the requirements, etc., must submit their questions submitted using the ProjNet system at https://www.projnet.org.

To submit a new inquiry or to view inquiries submitted by other Vendors, users must be registered and signed into the ProjNet system. Vendors may register online at https://www.projnet.org (click on “Register”).

The following information will be needed to submit or view inquiries:

Managing Agency: USACE

Solicitation Number: W912ES24Q0022

Bidder Inquiry Key: GTX4R2-NZ3VUV

Vendors shall submit inquiries not later than 10 days prior to the response date in order to ensure adequate time is allotted to form an appropriate response and amend the posting if necessary. Those who submit an inquiry will receive a system-generated email acknowledgement. All answers to inquiries will be posted in ProjNet after they have been reviewed by the USACE technical team. Vendors are advised to review the solicitation in its entirety and to review all previously submitted questions and responses prior to submitting a new inquiry.

QUOTERS SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections (refer to FAR Clause 52.204-13 “System for Award Management Maintenance”).

mailto:scott.e.hendrix@usace.army.mil https://www.projnet.org/ https://www.projnet.org/

STATEMENT OF WORK

1. INTRODUCTION. The U.S. Army Corps of Engineers (USACE), Saint Paul District (MVP) is issuing this solicitation for quality assurance (QA) services related to gate maintenance located at Lock and Dam 5 (LD5) in Minnesota City, Minnesota. The Contractor for this contract (Contractor) will be providing QA services for construction work performed by a Construction Contractor under separate contract, W912ES23C0011 Lock and Dam 5 Routine Gate Maintenance (LD5 RGM). The Scope of Work for W912ES23C0011 includes: Miscellaneous Steel Repairs; Roller Gate End Shield Fabrication and Installation; Sandblasting and Painting Roller Gates; Replacement of Seals on Roller Gates; Rehabilitation of Roller Gate Bulkheads and Bulkhead Trucks; Disposal of Poiree Strongbacks (unserviceable for dam operations); Sandblasting and Painting of Roller Gate Bridge Spans; and Sandblasting and Painting Storage Yard Bridge Spans. Both Bridge Spans require lead-based paint remediation. This Scope of Work (SOW) details the contract requirements for performing the required QA inspections during the inspection, repair, and painting of the Hydraulic Steel Structures (HSS).

1.1 Summary of services required. Required services include work associated with the following

Lock and Dam 5 Routine Gate Maintenance activities: QA Inspection and Verification of Construction Contractor’s inspections; Reviewing Construction Contractor’s Steel Repair Plan based on the steel repair inspections; QA testing and inspection of steel repairs; QA inspections of Construction Contractor’s Painting Means and Methods; and Review and Response to applicable requests for information (RFI) and submittals.

2 CONTRACTOR RESPONSIBILITIES. The Contractor must furnish all material, equipment, supplies, labor, transportation, incidentals, travel, and services required to accomplish the work described herein. The Contractor must assign a point of contact (POC) between the Contractor and Contracting Officer (KO) and/or Contracting Officer's Representative (COR) who must be responsible for all work performed and who will coordinate all work with the Construction Contractor. At no time shall the successful awardee of this contract interfere with, change, or disrupt the schedule or work of the Construction Contractor. At no time shall the Contractor direct the Construction Contractor’s work. While the Contractor is responsible for identifying any non-compliant items in the Construction Contractor’s work, all findings must be coordinated through the COR.

All services must meet the standards set forth herein.

3 REFERENCE DOCUMENTS. Reference documents referred to herein must include:

• American Welding Society (AWS) Structural Welding Code – Steel D1.1 – 2020

• American Welding Society (AWS) Standard for AWS Certification of Welding Inspectors – QC1:2016

• American Association of State Highway and Transportation Officials (AASHTO)/National Steel Bridge

Alliance (NSBA) Steel Bridge Collaboration S4.1 – 2002

• ASTM International (ASTM) F3125 - Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength

• ASTM International (ASTM) F3148 - High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength

• Contract documents for Contract No. W912ES23C0011 Lock and Dam 5 Routine Gate Maintenance

• Steel Bridge Fabrication QC/QA Guide Specification

• Research Council of Structural Connections (RCSC) Specification for Structural Joints Using American

Society for Testing and Materials (ASTM) A325 and A490 Bolts 2014

• Society for Protective Coatings (SSPC) QP 1 – Standard Procedure for Evaluating Painting Contractors

• Society for Protective Coatings (SSPC) QP 3 - Certification Standard for Shop Application of Complex

Protective Coating Systems

4 QUALIFICATIONS. Services require knowledge of structural steel repair and steel protective coatings including, but not limited to: storage, handling, cutting, bending, machining, fit-up, surface prep, welding, bolting, erection, coatings, and coating application.

4.1 Contractor. The Contractor must have at least three (3) similar in-progress or completed projects in the past 15 years executing quality assurance contracts or quality control contracts for fabrication or repair of steel highway bridges, dam bridges or gates, lock gates, multi-story buildings comprised of steel frames, large storage tanks (greater than 10,000 gallons) or pressure vessels, or steel pipelines.

4.2 Key Personnel and Substitutions. In its proposal, the Contractor shall designate Key Personnel in accordance with roles and qualifications defined in paragraphs 4.2.2 and 4.2.3. The Contractor must submit the required information for each role. The Contractor shall obtain the Contracting Officer's written consent before making any substitution for the Key Personnel specified in 4.2.2 and 4.2.3. If the Contractor proposes a substitution, it shall submit a complete resume for the individual being proposed that establishes that the individual meets the minimum standard for the substitution. The minimum standard for any substitution is the level of qualifications and experience submitted in the proposal or that required by paragraph 4.2.2 or 4.2.3, whichever is greater. In addition, the Contractor must submit a detailed explanation of the circumstances necessitating the proposed substitution. The Contracting Officer will notify the Contractor within 15 calendar days after receipt of all required information of the decision on the proposed substitute.

4.2.1 During the first ninety (90) days of performance, the Contractor shall make NO substitutions of key personnel unless the substitution is necessitated by illness, death, or termination of employment. The Contractor shall notify the Contracting Officer, in writing, within 15 calendar days after the occurrence of any of these events and provide the information required by paragraph 4.2. After the initial 90-day period of the contract, the Contractor shall submit the information required by paragraph 4.2 to the Contracting Officer at least 15 days prior to making any substitutions. The Contracting Officer must approve all substitutions in writing.

4.2.2 Structural Engineer (Principal). The Structural Engineer must have a current P.E. license in a U.S. State or Territory. The Structural Engineer must possess at least five (5) years of post-registration experience. The experience must include design and quality assurance for fabrication or repair of steel highway bridges, dam bridges or gates, lock gates, multi-story steel frame buildings, large storage tanks (greater than 10,000 gallons) or pressure vessels, or steel pipelines.

4.2.3 Coating & Paint Inspector (Principal). The Coating and Paint Inspector(s) must have the following Association for Materials Protection and Performance (AMPP) Course Certifications: 1.) Coating Inspector Program (CIP) - Level 2; and 2.) Supervisor/Competent Person Training for Deleading and Hazardous Coatings Removal (C3). The Contractor can meet this requirement with two individuals. The individual(s) must have a minimum of two (2) years of experience in inspection and testing of coating systems with the certification. The individual(s) must be responsible for inspecting lead abatement means and methods of the Construction Contractor. All certifications must be current at the time offers are due and must maintain current certification throughout the duration of the contract.

4.5 Non-Key Personnel Qualifications. The Contractor is required to have Other Personnel in accordance with roles and qualifications defined in paragraphs 4.5.1 through 4.5.4.

4.5.1 Weld Inspector (Principal). The AWS Certified Welding Inspector must be in conformance with AWS QC1, qualified to ASNT Recommended Practice No. SNT-TC-1A, Level II or Level III or equivalent Certification Scheme for Welding Inspection Personnel, CSWIP 3.1. The individual must have a minimum of two (2) years of experience in inspection and testing of welds with the certification. These personnel are required to maintain valid certifications while performing work under this contract. The Contractor must submit proof of the Principal Weld Inspector’s credentials as a level II or level III CWI to the Government for approval at least ten days prior to commencing any work on the project.

4.5.2 Bolted Connection and Assembly Inspector. The bolted connection and assembly inspector must be experienced in the assembly of bolted fabrications and bolted connections. The individual must have a minimum of two (2) years of experience inspecting bolted connections and assemblies on steel structures listed in Paragraph

4.1 Contractor. The Contractor must submit documentation for Government Approval showing the Bolted Connection and Assembly inspector has at least two years of experience inspecting bolted connections and assemblies to include references and their contact information for previous employers at least ten days prior to commencing any work on the project.

4.5.3 NDT Technician. Non-destructive testing (NDT) personnel must have the following course certifications: 1.)

American National Standards Institute (ANSI) / American Society for Nondestructive Testing (ASNT) CP-189: ASNT Standard for Qualifications and Certification of Nondestructive Testing Personnel (2020); 2.) ASNT NDT Level II or Level III. In addition, the individual must have a minimum of two (2) years of experience conducting NDT testing with the certification. Acceptable alternative testing standards for NDT ASNT CP-189 are the Canadian Institute of NDE (CINDE) Level II or III, ISO 9712 Level II or III, NAS 410 Level II or III, or ASNT ACCP Level II or III. These personnel are required to maintain valid certifications while performing work under this contract. The Contractor must submit proof of each NDT Technician’s weld inspector credentials for Government Approval at least ten days prior to commencing any work on the project.

5. SERVICES TO BE PROVIDED BY THE CONTRACTOR

5.1 Develop QA Inspection Plan:

Prepare and submit for Government approval a QA inspection plan, which includes site visit preparation, Construction Contractor submittal reviews and requests for information reviews as outlined herein and in the Construction Contractor’s contract, weld inspection procedures and methods, identification of FCM’s, preparation of inspection schedule in coordination with the Construction Contractor’s schedule, identification of bolts to inspect and inspection methods, painting and coating inspection methods and procedures, and procedures for reporting communicating any non-compliance with the Construction Contractor’s contract to the Government. The Contractor must submit the QA Inspection plan within 21 days of contract award for Government approval.

5.2 Contractor Submittal Reviews

Reviews must include preconstruction submittals, shop drawings, and repair plans detailed in specification sections 05 50 15 and 05 90 00. The Structural Engineer is responsible for review of all RFIs, submittals, shop drawings and repair plans.

5.2.1 Review of Construction Contractor’s submittals within specification section 05 90 00 METALS – INSPECTION AND REPAIR OF DAM GATES requires special attention and coordination.

a. Review plans for compliance with code standards and use of best repair practice to restore repaired area “in kind” surrounding areas not repaired.

b. Efficiency of the repair plan. Verification that the proposed plan is an efficient use of steel and weld materials.

c. A full review, with comments, of the Construction Contractor’s Repair Plans for each Roller Gate is required 3 calendar days after receipt from the Government. All other submittals must be reviewed and comments provided to the Government within 10 calendar days.

d. In addition to the submittal reviews required in this section, coordination with the Construction

Contractor’s schedule is required to attend required meetings, inspections, and perform QA testing.

5.2.2 Review Requests for Information (RFI) related to work described within specification sections 05 50 15, 05 90 00, and 09 97 02.

5.2.3 Review the following Construction Contractor’s preconstruction submittals required in 09 97 02.

a. Ventilation Assessment Plans for Roller Gate work and lead based paint abatement (Storage Yard Bridge Span and Roller Gate Bridge Span work)

b. Medical Surveillance Plans

c. Containment Plan

5.3 Attend meetings and perform on-site inspections to include the following. Contractor must be prepared to work weekends and be on-site within 72 hours of the COR notification that the Construction Contractor is ready for inspection.

5.3.1 Review Construction Contractor’s initial construction schedule, progress updates, and any schedule changes to coordinate work associated with site visits to conduct inspection and attend meetings as required.

5.3.2 Attend Inspection Coordination Meeting prior to the first General Condition Inspection. QA inspection must occur concurrently with Construction Contractor’s first General Condition Inspection of the first Roller Gate to be inspected.

5.3.3 Attend Weekly Construction Meetings virtually. Coordinate with COR for date and time of these weekly meetings.

5.3.4 The QA inspections of Roller Gates must be completed in accordance with specification section 05 90 00.

5.3.5 The Non-Destructive Evaluation must be conducted after the Construction Contractor has exposed steel members and welds through sandblasting and paint removal. All welds must undergo visual examination.

Contractor must verify Construction Contractor is performing non-destructive evaluation in accordance with the specification section 05 90 00. The Non-Destructive Evaluation must be performed for every gate.

5.3.6 Contractor must verify Construction Contractor is performing Remaining Thickness Measurements in accordance with specification section 05 90 00.

5.3.7 Contractor must verify through on-site inspection that the Construction Contractor is following approved Repair Plan, and the repairs follow applicable codes and the contract specifications. This inspection must be performed for every gate.

5.3.8 Contractor must perform inspections of Roller Gate End Shields at the Johnson Machine Works Fabrication shop in Chariton, IA. In coordination with the COR, perform a prefinal inspection and final inspection prior to each set of end shields leaving the fabrication shop. Inspect the end shields for compliance with the specification section 05 50 15, approved shop drawings and plans, and contract drawings. Prepare written reports in accordance with paragraph 5.3.14.

5.3.9 Contractor must inspect the newly fabricated Roller Gate End Shields after delivery to site and prior to the Construction Contractor installing the new end shields. QA must inspect for compliance with specification section 05 50 15, approved shop drawings and plans, and contract drawings. Prepare written reports for each inspection in accordance with paragraph 5.3.14.

5.3.10 Contractor must inspect roller gate end shield connection to the roller gate for compliance with specification section 05 50 15, approved shop drawings and plans, and contract drawings.

5.3.11 Contractor must verify through onsite inspection the Bulkhead Repairs made on the Roller Gate Bulkheads comply with the Construction Contract.

5.3.12 Contractor must inspect coating and painting means and methods of the Construction Contractor to ensure environmental regulations, the contract specifications, contract drawings, and approved plans under specification section 09 97 02 are being followed.

5.3.13 Perform a verbal out briefing of identified items of concern to any government staff attending the on-site inspection. If no government staff are on-site, perform a conference call within 2 business days of the inspection, to be scheduled with the COR.

5.3.14 Prepare a written report for each site visit day that includes a summary of QA work completed and listing of all visual, NDT inspections, bolting, and painting and coating inspections completed. If QA work indicates that welding and contract specifications are not being met, photos of noncompliant areas and recommended actions to correct the deficiencies must be included in the report. The adequacy of the Construction Contractor’s QC program must be included. An electronic pdf copy of each inspection report must be submitted to the COR within seven calendar days after the site visit. Reports must be on company letterhead and signed by the inspector(s) or structural engineer.

5.3.15 A final report must be prepared after the final inspection of each Roller Gate. The final report must recommend acceptance or rejection of each gate. Each final inspection report must incorporate all site inspection reports with a summary of deficiencies and corrective actions taken for each inspection item. An electronic pdf copy of each final inspection report must be submitted to the COR within 7 calendar days after the final inspection.

Reports must be on company letterhead and signed by the inspector.

5.4 TESTING. Contractor must be knowledgeable, capable of witnessing, and performing the listed tests in accordance with the following standards.

5.5 TRAVEL FOR ON-SITE FIELD INSPECTIONS. All expenses associated with travel for the on-site field inspections must be included in the applicable bid items. These expenses include but are not limited to labor, transportation, parking, lodging, and meals. Travel costs must be in accordance with the Joint Federal Travel Regulations.

The estimated number of inspection travel shown on the bid schedule does not represent a guaranteed minimum number of payments. The actual number of travel trips required will depend on the Construction Contractor’s Work Plan and Construction Contractor’s schedule.

5.6 MEASUREMENT AND PAYMENT. Payment items for work of this contract are listed in the SCHEDULE OF SERVICES. The price and payment made for each item listed will constitute full compensation for furnishing all labor, materials and equipment, and performing any associated Contractor quality control, meeting safety requirements, tests, reports, and performing all work required for which separate payment is not otherwise provided.

ASTM A435 Specification for Straight-Beam Ultrasonic Examination of Steel Plates ASTM A388 Practice for Ultrasonic Examination of Steel Forgings ASTM A577 Specification for Ultrasonic Angle-Beam Examination of Steel Plates ASTM A578 Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special

Applications ASTM A275 Practice for Magnetic Particle Examination of Steel Forgings ASTM E1444 Practice for Magnetic Particle Testing ASTM E165 Practice for Liquid Penetrant Examination for General Industry ASTM E94 Standard Guide for Radiographic Testing ASTM E747 Standard Practice for Design, Manufacture, and Material Grouping Classification of Wire Image

Quality Indicators (IQI) Used for Radiology ASTM A370 Test Methods and Definitions for Mechanical Testing of Steel Products (Includes Charpy Impact

Testing) Metal Composition and Identification Tests Hardness Testing Wire Rope Testing Rotational- Capacity Test

ASTM F3125, Annex A2; ASTM F3148, Annex A1

Verification Test Research Council on Structural Connections (RCSC) Specification for Structural Joints Using ASTM A325 and A490 Bolts 2014

ASTM D6132 Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage

ASTM D7091 Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

ASTM D4417,

Method C

Field Measurement of Surface Profile of Blast Cleaned Steel, Test Methods for Blast-cleaned Steel

WAGE DETERMINATION - 2015-4929

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4929 Daniel W. Simms Division of | Revision No.: 24 Director Wage Determinations| Date Of Last Revision: 12/26/2023

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.90 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: Wisconsin

Area: Wisconsin Counties of Barron, Buffalo, Clark, Crawford, Dunn, Jackson, Juneau, Monroe, Pepin, Trempealeau, Vernon

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 16.17*** 01012 - Accounting Clerk II 18.14 01013 - Accounting Clerk III 20.30 01020 - Administrative Assistant 27.72 01035 - Court Reporter 20.45 01041 - Customer Service Representative I 14.99*** 01042 - Customer Service Representative II 16.36*** 01043 - Customer Service Representative III 18.37 01051 - Data Entry Operator I 15.98*** 01052 - Data Entry Operator II 17.43

01060 - Dispatcher, Motor Vehicle 22.33 01070 - Document Preparation Clerk 16.29*** 01090 - Duplicating Machine Operator 16.29*** 01111 - General Clerk I 14.76*** 01112 - General Clerk II 16.11*** 01113 - General Clerk III 18.09 01120 - Housing Referral Assistant 22.81 01141 - Messenger Courier 13.68*** 01191 - Order Clerk I 16.39*** 01192 - Order Clerk II 17.89 01261 - Personnel Assistant (Employment) I 17.24 01262 - Personnel Assistant (Employment) II 19.29 01263 - Personnel Assistant (Employment) III 21.50 01270 - Production Control Clerk 22.77 01290 - Rental Clerk 17.65 01300 - Scheduler, Maintenance 18.28 01311 - Secretary I 18.28 01312 - Secretary II 20.45 01313 - Secretary III 22.81 01320 - Service Order Dispatcher 19.96 01410 - Supply Technician 27.72 01420 - Survey Worker 18.82 01460 - Switchboard Operator/Receptionist 17.17*** 01531 - Travel Clerk I 16.19*** 01532 - Travel Clerk II 16.84*** 01533 - Travel Clerk III 18.57 01611 - Word Processor I 16.29*** 01612 - Word Processor II 18.28 01613 - Word Processor III 20.45 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 20.32 05010 - Automotive Electrician 20.11 05040 - Automotive Glass Installer 19.26 05070 - Automotive Worker 18.13 05110 - Mobile Equipment Servicer 17.35 05130 - Motor Equipment Metal Mechanic 21.19 05160 - Motor Equipment Metal Worker 19.26 05190 - Motor Vehicle Mechanic 20.04 05220 - Motor Vehicle Mechanic Helper 16.36*** 05250 - Motor Vehicle Upholstery Worker 18.40 05280 - Motor Vehicle Wrecker 19.26 05310 - Painter, Automotive 20.11 05340 - Radiator Repair Specialist 19.26 05370 - Tire Repairer 17.71 05400 - Transmission Repair Specialist 21.19 07000 - Food Preparation And Service Occupations 07010 - Baker 14.58*** 07041 - Cook I 16.44*** 07042 - Cook II 18.49 07070 - Dishwasher 10.21*** 07130 - Food Service Worker 14.14*** 07210 - Meat Cutter 18.69 07260 - Waiter/Waitress 9.81*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.41 09040 - Furniture Handler 14.24*** 09080 - Furniture Refinisher 20.88 09090 - Furniture Refinisher Helper 16.50*** 09110 - Furniture Repairer, Minor 18.72 09130 - Upholsterer 21.95 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 15.45***

11060 - Elevator Operator 15.45*** 11090 - Gardener 19.21 11122 - Housekeeping Aide 16.29*** 11150 - Janitor 16.29*** 11210 - Laborer, Grounds Maintenance 15.53*** 11240 - Maid or Houseman 13.45*** 11260 - Pruner 14.32*** 11270 - Tractor Operator 18.00 11330 - Trail Maintenance Worker 15.53*** 11360 - Window Cleaner 17.68 12000 - Health Occupations 12010 - Ambulance Driver 14.94*** 12011 - Breath Alcohol Technician 22.42 12012 - Certified Occupational Therapist Assistant 28.87 12015 - Certified Physical Therapist Assistant 28.74 12020 - Dental Assistant 20.63 12025 - Dental Hygienist 36.30 12030 - EKG Technician 33.57 12035 - Electroneurodiagnostic Technologist 33.57 12040 - Emergency Medical Technician 14.94*** 12071 - Licensed Practical Nurse I 20.05 12072 - Licensed Practical Nurse II 22.42 12073 - Licensed Practical Nurse III 25.00 12100 - Medical Assistant 20.13 12130 - Medical Laboratory Technician 28.48 12160 - Medical Record Clerk 20.98 12190 - Medical Record Technician 23.46 12195 - Medical Transcriptionist 20.74 12210 - Nuclear Medicine Technologist 49.29 12221 - Nursing Assistant I 12.77*** 12222 - Nursing Assistant II 14.36*** 12223 - Nursing Assistant III 15.67*** 12224 - Nursing Assistant IV 17.60 12235 - Optical Dispenser 18.03 12236 - Optical Technician 20.05 12250 - Pharmacy Technician 17.48 12280 - Phlebotomist 18.03 12305 - Radiologic Technologist 31.00 12311 - Registered Nurse I 25.42 12312 - Registered Nurse II 31.08 12313 - Registered Nurse II, Specialist 31.08 12314 - Registered Nurse III 37.60 12315 - Registered Nurse III, Anesthetist 37.60 12316 - Registered Nurse IV 45.08 12317 - Scheduler (Drug and Alcohol Testing) 27.79 12320 - Substance Abuse Treatment Counselor 27.69 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.33 13012 - Exhibits Specialist II 22.72 13013 - Exhibits Specialist III 27.79 13041 - Illustrator I 18.33 13042 - Illustrator II 22.72 13043 - Illustrator III 27.79 13047 - Librarian 25.33 13050 - Library Aide/Clerk 14.04*** 13054 - Library Information Technology Systems 22.72 Administrator 13058 - Library Technician 15.04*** 13061 - Media Specialist I 16.39*** 13062 - Media Specialist II 18.33 13063 - Media Specialist III 20.44 13071 - Photographer I 16.44***

13072 - Photographer II 18.40 13073 - Photographer III 22.79 13074 - Photographer IV 27.89 13075 - Photographer V 33.74 13090 - Technical Order Library Clerk 17.64 13110 - Video Teleconference Technician 19.98 14000 - Information Technology Occupations 14041 - Computer Operator I 19.48 14042 - Computer Operator II 21.79 14043 - Computer Operator III 24.43 14044 - Computer Operator IV 27.19 14045 - Computer Operator V 31.49 14071 - Computer Programmer I (see 1) 23.02 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 19.48 14160 - Personal Computer Support Technician 27.19 14170 - System Support Specialist 31.76 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 32.29 15020 - Aircrew Training Devices Instructor (Rated) 39.07 15030 - Air Crew Training Devices Instructor (Pilot) 46.84 15050 - Computer Based Training Specialist / Instructor 32.29 15060 - Educational Technologist 36.36 15070 - Flight Instructor (Pilot) 46.84 15080 - Graphic Artist 22.32 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 46.84 15086 - Maintenance Test Pilot, Rotary Wing 46.84 15088 - Non-Maintenance Test/Co-Pilot 46.84 15090 - Technical Instructor 23.92 15095 - Technical Instructor/Course Developer 29.25 15110 - Test Proctor 19.30 15120 - Tutor 19.30 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 15.12*** 16030 - Counter Attendant 15.12*** 16040 - Dry Cleaner 17.34 16070 - Finisher, Flatwork, Machine 15.12*** 16090 - Presser, Hand 15.12*** 16110 - Presser, Machine, Drycleaning 15.12*** 16130 - Presser, Machine, Shirts 15.12*** 16160 - Presser, Machine, Wearing Apparel, Laundry 15.12*** 16190 - Sewing Machine Operator 18.06 16220 - Tailor 18.78 16250 - Washer, Machine 15.90*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 22.84 19040 - Tool And Die Maker 27.22 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 24.12 21030 - Material Coordinator 22.77 21040 - Material Expediter 22.77 21050 - Material Handling Laborer 17.98 21071 - Order Filler 16.44*** 21080 - Production Line Worker (Food Processing) 24.12 21110 - Shipping Packer 19.86 21130 - Shipping/Receiving Clerk 19.86 21140 - Store Worker I 16.11***

21150 - Stock Clerk 20.68 21210 - Tools And Parts Attendant 24.12 21410 - Warehouse Specialist 24.12 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 31.58 23019 - Aircraft Logs and Records Technician 25.85 23021 - Aircraft Mechanic I 30.23 23022 - Aircraft Mechanic II 31.58 23023 - Aircraft Mechanic III 32.97 23040 - Aircraft Mechanic Helper 22.77 23050 - Aircraft, Painter 28.83 23060 - Aircraft Servicer 25.85 23070 - Aircraft Survival Flight Equipment Technician 28.83 23080 - Aircraft Worker 27.35 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 27.35 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 30.23

II

23110 - Appliance Mechanic 28.83 23120 - Bicycle Repairer 24.32 23125 - Cable Splicer 46.46 23130 - Carpenter, Maintenance 24.29 23140 - Carpet Layer 27.35 23160 - Electrician, Maintenance 29.93 23181 - Electronics Technician Maintenance I 27.35 23182 - Electronics Technician Maintenance II 28.83 23183 - Electronics Technician Maintenance III 30.23 23260 - Fabric Worker 25.85 23290 - Fire Alarm System Mechanic 30.23 23310 - Fire Extinguisher Repairer 24.32 23311 - Fuel Distribution System Mechanic 37.28 23312 - Fuel Distribution System Operator 30.10 23370 - General Maintenance Worker 22.30 23380 - Ground Support Equipment Mechanic 30.23 23381 - Ground Support Equipment Servicer 25.85 23382 - Ground Support Equipment Worker 27.35 23391 - Gunsmith I 24.32 23392 - Gunsmith II 27.35 23393 - Gunsmith III 30.23 23410 - Heating, Ventilation And Air-Conditioning 24.31 Mechanic 23411 - Heating, Ventilation And Air Contidioning 25.39 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 28.38 23440 - Heavy Equipment Operator 30.44 23460 - Instrument Mechanic 30.23 23465 - Laboratory/Shelter Mechanic 28.83 23470 - Laborer 17.98 23510 - Locksmith 28.83 23530 - Machinery Maintenance Mechanic 27.28 23550 - Machinist, Maintenance 21.50 23580 - Maintenance Trades Helper 15.41*** 23591 - Metrology Technician I 30.23 23592 - Metrology Technician II 31.58 23593 - Metrology Technician III 32.97 23640 - Millwright 30.05 23710 - Office Appliance Repairer 28.83 23760 - Painter, Maintenance 22.95 23790 - Pipefitter, Maintenance 30.64 23810 - Plumber, Maintenance 29.21 23820 - Pneudraulic Systems Mechanic 30.23 23850 - Rigger 30.23

23870 - Scale Mechanic 27.35 23890 - Sheet-Metal Worker, Maintenance 27.26 23910 - Small Engine Mechanic 18.46 23931 - Telecommunications Mechanic I 28.22 23932 - Telecommunications Mechanic II 29.48 23950 - Telephone Lineman 27.32 23960 - Welder, Combination, Maintenance 22.44 23965 - Well Driller 30.23 23970 - Woodcraft Worker 30.23 23980 - Woodworker 24.32 24000 - Personal Needs Occupations 24550 - Case Manager 20.91 24570 - Child Care Attendant 12.41*** 24580 - Child Care Center Clerk 15.47*** 24610 - Chore Aide 13.99*** 24620 - Family Readiness And Support Services 20.91 Coordinator 24630 - Homemaker 20.91 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 29.89 25040 - Sewage Plant Operator 28.50 25070 - Stationary Engineer 29.89 25190 - Ventilation Equipment Tender 22.52 25210 - Water Treatment Plant Operator 28.50 27000 - Protective Service Occupations 27004 - Alarm Monitor 23.77 27007 - Baggage Inspector 17.08*** 27008 - Corrections Officer 23.85 27010 - Court Security Officer 19.62 27030 - Detection Dog Handler 19.11 27040 - Detention Officer 23.85 27070 - Firefighter 17.50 27101 - Guard I 17.08*** 27102 - Guard II 19.11 27131 - Police Officer I 25.09 27132 - Police Officer II 27.89 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 14.64*** 28042 - Carnival Equipment Repairer 15.63*** 28043 - Carnival Worker 11.63*** 28210 - Gate Attendant/Gate Tender 17.06*** 28310 - Lifeguard 11.34*** 28350 - Park Attendant (Aide) 19.08 28510 - Recreation Aide/Health Facility Attendant 13.92*** 28515 - Recreation Specialist 23.64 28630 - Sports Official 15.19*** 28690 - Swimming Pool Operator 17.58 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 27.35 29020 - Hatch Tender 27.35 29030 - Line Handler 27.35 29041 - Stevedore I 25.85 29042 - Stevedore II 28.83 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 43.06 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 29.69 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 32.70 30021 - Archeological Technician I 18.26 30022 - Archeological Technician II 20.42 30023 - Archeological Technician III 25.35 30030 - Cartographic Technician 25.35 30040 - Civil Engineering Technician 25.35

30051 - Cryogenic Technician I 28.02 30052 - Cryogenic Technician II 30.94 30061 - Drafter/CAD Operator I 18.26 30062 - Drafter/CAD Operator II 20.42 30063 - Drafter/CAD Operator III 22.81 30064 - Drafter/CAD Operator IV 28.07 30081 - Engineering Technician I 16.11*** 30082 - Engineering Technician II 18.10 30083 - Engineering Technician III 20.24 30084 - Engineering Technician IV 25.07 30085 - Engineering Technician V 30.67 30086 - Engineering Technician VI 37.12 30090 - Environmental Technician 25.43 30095 - Evidence Control Specialist 25.30 30210 - Laboratory Technician 22.74 30221 - Latent Fingerprint Technician I 28.02 30222 - Latent Fingerprint Technician II 30.94 30240 - Mathematical Technician 25.35 30361 - Paralegal/Legal Assistant I 21.54 30362 - Paralegal/Legal Assistant II 26.68 30363 - Paralegal/Legal Assistant III 32.63 30364 - Paralegal/Legal Assistant IV 39.48 30375 - Petroleum Supply Specialist 30.94 30390 - Photo-Optics Technician 25.35 30395 - Radiation Control Technician 30.94 30461 - Technical Writer I 25.35 30462 - Technical Writer II 31.01 30463 - Technical Writer III 37.51 30491 - Unexploded Ordnance (UXO) Technician I 27.37 30492 - Unexploded Ordnance (UXO) Technician II 33.11 30493 - Unexploded Ordnance (UXO) Technician III 39.69 30494 - Unexploded (UXO) Safety Escort 27.37 30495 - Unexploded (UXO) Sweep Personnel 27.37 30501 - Weather Forecaster I 28.07 30502 - Weather Forecaster II 34.14 30620 - Weather Observer, Combined Upper Air Or (see 2) 22.81 Surface Programs 30621 - Weather Observer, Senior (see 2) 25.35 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 33.11 31020 - Bus Aide 15.11*** 31030 - Bus Driver 20.40 31043 - Driver Courier 17.08*** 31260 - Parking and Lot Attendant 14.30*** 31290 - Shuttle Bus Driver 15.99*** 31310 - Taxi Driver 13.08*** 31361 - Truckdriver, Light 18.24 31362 - Truckdriver, Medium 19.39 31363 - Truckdriver, Heavy 23.20 31364 - Truckdriver, Tractor-Trailer 23.20 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 16.14*** 99030 - Cashier 13.52*** 99050 - Desk Clerk 12.40*** 99095 - Embalmer 34.95 99130 - Flight Follower 27.37 99251 - Laboratory Animal Caretaker I 14.01*** 99252 - Laboratory Animal Caretaker II 14.96*** 99260 - Marketing Analyst 27.00 99310 - Mortician 34.95 99410 - Pest Controller 25.15 99510 - Photofinishing Worker 14.38***

99710 - Recycling Laborer 22.62 99711 - Recycling Specialist 26.20 99730 - Refuse Collector 20.85 99810 - Sales Clerk 14.09*** 99820 - School Crossing Guard 17.42 99830 - Survey Party Chief 29.57 99831 - Surveying Aide 17.29 99832 - Surveying Technician 22.70 99840 - Vending Machine Attendant 20.95 99841 - Vending Machine Repairer 25.16 99842 - Vending Machine Repairer Helper 20.95

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20 per hour) or 13658 ($12.90 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands. The minimum wage requirements of Executive Order 14026 also are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.98 per hour, up to 40 hours per week, or $199.20 per week or $863.20 per month

HEALTH & WELFARE EO 13706: $4.57 per hour, up to 40 hours per week, or $182.80 per week, or $792.13 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth

National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive,…