W912ES22Q0010 LHE Training.pdf

SEE ADDENDUM

(No Collect Calls)

W912ES22Q0010 20-Oct-2021

b. TELEPHONE NUMBER

651-290-5375

8. OFFER DUE DATE/LOCAL TIME

12:00 PM 01 Nov 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912ES9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

ROBERTA L JUST

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

CONTRACTING DIVISION

USACE - ST PAUL

180 FIFTH STREET EAST

SUITE 700

SAINT PAUL MN 55101-1678

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 965605 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FOUNTAIN CITY SERVICE BASE

AARON PIPELOW

431 NORTH SHORE DRIVE

FOUNTAIN CITY WI 54629-0397

TEL: 651-290-5166 FAX:

FAX:

TEL: 651-290-5414 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$16,500,000

NAICS:

611519

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF39

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912ES22Q0010

Section SF 1449 - CONTINUATION SHEET

NOTES TO QUOTERS

This section provides general guidance for preparing the quotation in response to this solicitation. The Quoter’s response to this solicitation must include all data and information requested herein in accordance with these instructions.

Price Proposal: This is the solicitation in its entirety. Quoter to complete the following:

Standard Form 1449 Solicitation/Contract/Order for Commercial Items - Complete Blocks 17, and 30a/b/c

Acknowledgement of Amendments – Complete only as necessary and provide signed copies of the Standard Form 30 Amendment of Solicitation/Modification of Contract with your quote.

Price Quote– All pricing (unit, total, subtotal, grand total, etc.) must be in whole penny amounts and shall include all associated costs (i.e.travel, per-diem etc.) in the line item.

FAR Clause 52.212-3 Offeror Representations and Certifications – Commercial Items (Feb 2021) Alternate I (Oct 2014) – This provision is included by reference. Review paragraph (b)(2) “Annual Representations and Certifications” of the basic clause at https://www.acquisition.gov/, complete as necessary and return one copy with your quote.

Submitting Quotes – All transmittals shall be submitted electronically to Theodore.R.Hecht@usace.army.mil and be clearly marked in the subject line of the email with the solicitation number, W912ES22Q0010. Quotes must be received no later than the date and time stated in the solicitation. Quotes received after the deadline are Late and will not be considered for contract award.

Questions – All questions concerning the solicitation document shall be submitted no later than COB November 5, 2021 via email to roberta.l.just@usace.army.mil. Answers to questions will be provided to all quoters being solicited though an amendment, giving due regard to the proper protection of proprietary information.

QUOTERS SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections (refer to FAR Clause 52.204-13 “System for Award Management Maintenance”).

STATEMENT OF WORK

1. GENERAL:

This requirement is for a non‐personal services Indefinite Delivery Indefinite Quantity Contract (IDIQ) for Load Handling Equipment Inspection/Training and Safety Training. The Contractor shall provide all certified inspectors, instructors, materials, supplies, practical testing equipment, supervisions, and incidentals necessary to provide services associated with training, for the Corps of Engineers, St. Paul District Area of Responsibility, which includes but is not limited to the following project sites:

Fountain City Service Base – Fountain City, WI

Lower Saint Anthony Falls – Minneapolis, MN

Lock and Dam 1 – Minneapolis, MN

Lock and Dam 2 – Hastings, MN

Lock and Dam 3 – Welch, MN

Lock and Dam 4 – Alma, WI

Lock and Dam 5 – Minnesota City, MN

Lock and Dam 5A – Fountain City, WI

Lock and Dam 6 – Trempealeau, WI

Lock and Dam 7 – La Crescent, MN

Lock and Dam 8 – Genoa, WI

Lock and Dam 9 – Eastman, WI

Lock and Dam 10 – Guttenberg, IA

BlackHawk Park – DeSoto, WI

Cross Lake – Crosslake, MN

Eau Galle Recreation Area – Spring Valley, WI

Gull Lake – Brainerd, MN

Homme Lake – Valley City, ND

Lac Qui Parle Lake – Watson, MN

Lake Ashtabula / Baldhill Dam – Valley City, ND

Lake Traverse – Wheaton, MN

Lake Winnibigoshish – Grand Rapids, MN

Leech Lake – Federal Dam, MN

Orwell Lake – Fergus Falls, MN

Pokegema Recreation Area – Grand Rapids, MN

Sandy Lake – McGregor, MN

Dredge Goetz – Operating locations from Mississippi River mile 795 (near Red Wing, MN) to Mississippi River mile 194 (near Granite City, IL)

2. SAFETY:

The Contractor shall comply with the applicable provisions of the current EM 385‐1‐1, Safety and Health Requirements Manual, U.S. Army Corps of Engineers (current edition), OSHA, ANSI, ASME B30, NFPA, state and local requirement.

3. SERVICES:

Task Orders will be issued for performance of a range of services associated with Load Handling Equipment Inspection/Training and Safety Training that will fall into one of the broad categories of services below (Class sizes will not exceed 10 students per session):

Various Load Handling Equipment Training including but not limited to:

o Qualified Rigger (Level I, II, & III) o Rigging Gear & Sling Inspector o Signal Person o Equipment Maintenance o Lift Planning/Lift Supervisor

4. TECHNICAL REQUIREMENTS FOR SERVICES:

a. Applicable Publications: The Contractor shall perform training in accordance with the latest additions of the applicable publications as indicated below. They include but are not limited to:

Manufacturer Recommendations: For equipment, supplies, and materials used/or inspected by the Contractor

Operating Manuals, Repair Manuals and Maintenance Manuals

Industrial Standards and Codes Underwriters Laboratories, Inc.

American National Standards Institute (ANSI)

American Society for Testing and Materials (ASTM)

American Society of Mechanical Engineer (ASME), including but not limited to: ASME B30, Mobile and Locomotive Cranes, Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings, copies of which are available for purchase at https://www.asme.org/products/codes‐ standards/b305‐2011‐mobile‐locomotive‐cranes

National Electrical Code

National Fire Protection Association

EM 385‐1‐1 USACE Publications ‐ Engineer Manuals (army.mil)

ER 385‐1‐91 USACE Publications ‐ Engineer Manuals (army.mil)

Code of Federal Regulations, 29 CFR1926 Subpart CC, Department of Labor, Occupational Safety and Health Administration ‐ Cranes and Derricks in Construction, copies of which are available at http://www.gpo.gov/fdsys/pkg/FR‐2010‐08‐09/pdf/2010‐17818.pdf

Army Regulation, AR 600–55, The Army Driver and Operator Standardization Program (Selection, Training, Testing, and Licensing), copies of which are available at http://www.wsmr.army.mil/pdf/AR600_55.pdf

29 OSHA 1910 &1926

Occupational Safety and Health Administration

American Institute of Steel Construction

b. Contractor Furnished Equipment and Materials: The contractor shall furnish all labor, materials, supplies, training support equipment and supervision necessary to perform Classroom and performance training as specified within this SOW at contract areas as specified. Unless otherwise specified, when the Contractor provides services under a task order, the Contractor shall provide all the necessary “tools of the trade”, such as all government approved training and testing materials for both written and performance testing, to accomplish the work. This includes all books, training aids, Multi‐media training programs, test weights or other hardware necessary for performance testing, the vehicles necessary to transport any materials and supplies, and/or Contractor personnel to and from the job site.

c. Qualified Person LHE Examiners, Instructors, Maintenance: The Contractor shall provide qualified personnel for performance of services under this agreement associated with Load Handling Equipment certified by a commercial qualifying / certifying organization in accordance with 29 CFR 1926 subpart cc (1926.1427). Personnel must be certified as NCCCO level I and Level II rigger.

o Key Personnel: The Contractor is responsible to ensure that the contractor personnel providing work on this contract are fully trained and fully competent to perform the required services for the duration of the contract period. Contractor’s personnel provided under this contract must meet the qualifications, training, and requirements stated above.

o Personnel Substitutions: During the first ninety (90) calendar days of performance, the Contractor shall make NO substitutions of key personnel unless the substitution is necessitated by illness, death or termination of employment. The Contractor shall notify the Contracting Officer (CO), in writing, within 15 calendar days after the occurrence of any of these events and provide the information required below. After 90 days, the Contractor shall submit the information required below to the CO at least 15 calendar days prior to making any permanent substitutions.

o The Contractor shall provide a detailed explanation of the circumstances necessitating the proposed substitutions, complete resumes for the proposed substitutes, and any additional information requested by the CO. Proposed substitutes shall have comparable qualifications to those of the persons being replaced. The CO will notify the Contractor within 15 calendar days after receipt of all required information of the decision on the proposed substitutes. The contract will be modified to reflect any approved changes of key personnel.

d. Qualified Level I Rigger Training: Instruction shall include training for Qualified Level I Rigger in accordance with Guidelines set forth by EM 385‐1‐1 15.B and 29 CFR 1926.1404. Provide Certification through written and practical testing demonstrating acceptable levels of knowledge and capability.

Written and Practical testing shall demonstrate that the individual has acceptable level of knowledge in a mixture of the following minimum classroom topics:

OSHA regulations

Wire rope slings & proper use

Synthetic web slings &proper use

Round slings & proper use

Chain slings & proper use

Rigging hardware & proper use

Below‐the‐hook lifting devices

Per‐use sling and gear inspection

Softeners & sling protection

Verifying working load limit (WLL)

Sling angles and angle stress

Load balance

Determining load weight

Safety while working around cranes

Taglines & proper uses

Power line safety

e. Qualified Level II Rigger Training: Instruction shall include training for Qualified Level II Rigger in accordance with Guidelines set forth by EM 385‐1‐1 15.B and 29 CFR 1926.1404. Provide Certification through written and practical testing demonstrating acceptable levels of knowledge and capability.

Written and Practical testing shall demonstrate that the individual has acceptable level of knowledge in a mixture of the following minimum classroom topics in addition to Qualified Rigger Level I Training:

How to conduct a pre‐use inspection of slings and rigging gear.

Understanding D/d ratios

Selection of slings and rigging gear suitable for the job at hand.

Applying hitches suitable for the specific rigging task.

How to calculate sling tension in bridle sling legs.

How to locate and calculate the weight of a load.

How to calculate and determine the load’s center of gravity.

Application of tag lines in accordance with OSHA regulations.

How to apply appropriate safety measures when working near overhead electrical power lines.

Use of rigging tools common to the industry.

How to use the Journeyman Riggers Pocket Guide (provided with this course).

Power Line Safety.

f. Qualified Rigger Level III Training (Master Rigger Level): Instruction shall include training for Qualified Level III Rigger in accordance with Guidelines set forth by EM 385‐1‐1 15.B and 29 CFR 1926.1404.

Provide Certification through written and practical testing demonstrating acceptable levels of knowledge and capability.

Written and Practical testing shall demonstrate that the individual has acceptable level of knowledge in a mixture of the following minimum classroom topics in addition to Qualified rigger Level II training:

Instruction on the use of rigging tools such as come‐alongs, jacks, rollers, blocking, and tension on block and tackle arrangements.

Use of overhead beams as rigging supports

Proper use of beam clamps, trolleys, snatch blocks, tuggers, etc.

How to properly drift a load

How to properly roll a load

Techniques for removal/installation of equipment from difficult locations using LHE

Detailed load planning for complex and critical lifts to include multiple crane lifts

How to use come‐a‐longs with overhead lifting

g. Rigging Gear & Sling Inspector Training:

Written and Practical testing shall demonstrate that the individual has acceptable level of knowledge in a mixture of the following minimum classroom topics:

Inspection requirements – frequent & periodic

Certification of slings and rigging gear

Methods of documentation & critical issues

Methods of removing & disposal of deficient gear

Wire rope types and construction

Wire rope end fitting inspection

Evaluating wire rope damage – cause and effects

Various ways rigging can be damaged and how to mitigate hazards

Inspections on web/round slings, chain slings, wire rope slings, chain and lever hoists, hooks, shackles, rings, eye bolts, and other below‐the‐hook lifting devices

Proper inspection techniques & analysis of findings

h. Qualified Signal Person Training: Instruction shall include training for Qualified Signal persons in accordance with EM 385‐1‐1 16.B.06 and 29 CFR 1926.1419. Written and Practical Testing not required for certification. Instruction shall include the following minimum classroom topics.

Terminology of the new standard

Crane characteristics & limitations

Signal person responsibilities

When a signal person is required

Hand and voice signals

The dangers of side loading

Crane dynamics as it pertains to a signal person

The dangers of two‐blocking

Tipping and structural failures

The dangers of working around power lines

The clearance requirements for cranes and power lines

The course of action if power line contact is made

Step and touch potential

The requirements to keep clear of the load (Fall zone)

The requirements of §1926 Subpart CC as it pertains to a signal person

i. Maintenance Training: Instruction shall provide training covering maintenance aspects of load handling equipment as specified in each task order. Load handling equipment includes but is not limited to: Lattice boom cranes, telescopic boom crane, overhead bridge cranes, and jib cranes. Training should be designed for operators as well as mechanics designated to operate and maintain identified equipment. Written and Practical Testing not required for certification. Instruction shall include the following minimum classroom topics:

Required Inspections

Preventive Maintenance

Manufacturer Operating Manual and instructions

Basic Hydraulic and Pneumatic Systems

Basic Electrical Schematic Interpretation

Gear Types and inspections

Bearing types and inspections

j. Lift Planning/ Lift Supervisor Training: Instruction shall include training for Lift Planning, critical lift planning and the duties and responsibilities of a Lift Supervisor/Director, as identified by 29CFR1926.1400 (Federal OSHA), ASME P30.1 Lift Planning and ASME B30.5 Mobile and Locomotive Cranes. Provide Certification through written test demonstrating acceptable levels of knowledge and capability.

Written test shall demonstrate that the individual has acceptable level of knowledge in a mixture of the following minimum classroom topics:

ASME B30.5 Responsibilities

OSHA requirements for Lift Director

ASME P30.1 Lift Planning

Site Preparation

Traffic Control

Crane Load Chart Data

Rigging Capacity Data

Hazard Recognition

Risk Assessment

Multiple Crane Lifts

Lifting Personnel

Lift Data Sheet

Load Schematic, Rigging Method and Selection

Pre‐Lift Safety Checklist

Crane Set‐up Schematic

Load Travel Path and Personnel Placement

Load Handling Sequence and Procedures

5. PRE‐SERVICE SUBMITTALS:

Prior to providing any services, the contractor shall submit the following submittals for government approval to the CO. Submittals shall be kept on file. Any revisions or alterations to previously approved submittals shall be re‐submitted for government approval prior to implementing any such revision. The following submittals shall be submitted within 30 calendar days from award unless otherwise specified.

Accident Prevention Plan: As required from the safety references detailed in section 2: Safety

Lesson Plan/Student Guide: Submit prior to performance of each required training a detailed lesson plan to address the following: Learning goal(s), objectives, materials/equipment to be used, all applicable standards, background knowledge, content/key points, instructional technique, estimated time, summative assessment, etc.

6. POST‐SERVICE DELIVERABLES:

Upon completion of services as required, the contractor shall submit the Specific training certification as well as the training attendance sign in roster within 10 calendar days from completion of any training, unless otherwise specified.

Rigging Training Certificate: Submit for each successful trainee. Certificates shall indicate the name of the individual, course successfully completed, and certification date.

Training Attendance Sign‐In Roster: Submit a Training Attendance Sign‐In Roster for each training session provided and completed. Training Attendance Sign‐In Roster shall indicate the dates in which training took place, type of training provided, number of hours of training, students names and signatures, and instructors name and signature.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 15 Session Level 1 Rigger Training

FFP

FOB: Destination

NET AMT

0002 5 Session Level II Rigger Training

0003 3 Session Level III Rigger Training

0004 2 Session Rigging Gear - Sling Inspector Training

0005 20 Session Signal Person Training

0006 1 Session LHE Maintenance Training

0007 2 Session Lift Planning - Lift Supervisor Training

1001 10 Session OPTION Level I Rigger Training

1002 4 Session OPTION Level II Rigger Training

1003 1 Session OPTION Level III Rigger Training

FFP

1004 1 Session OPTION Rigging Gear - Sling Inspector Training

1005 5 Session OPTION Signal Person Training

1006 1 Session OPTION LHE Maintenance Training

1007 1 Session OPTION Lift Planning - Lift Supervisor Training

2001 2 Session OPTION Level I Rigger Training

2002 2 Session OPTION Level II Rigger Training

2003 1 Session OPTION Level III Rigger Training

2004 1 Session OPTION Rigging Gear - Sling Inspector Training

2005 2 Session OPTION Signal Person Training

2006 1 Session OPTION LHE Maintenance Training

2007 1 Session OPTION Lift Planning - Lift Supervisor Training

3001 2 Session OPTION Level I Rigger Training

3002 2 Session OPTION Level II Rigger Training

3003 1 Session OPTION Level III Rigger Training

3004 1 Session OPTION Rigging Gear - Sling Inspector Training

3005 2 Session OPTION Signal Person Training

3006 1 Session OPTION LHE Maintenance Training

3007 1 Session OPTION Lift Planning - Lift Supervisor Training

4001 2 Session OPTION Level I Rigger Training

4002 1 Session OPTION Level II Rigger Training

4003 1 Session OPTION Level III Rigger Training

4004 1 Session OPTION Rigging Gear - Sling Inspector Training

4005 2 Session OPTION Signal Person Training

4006 1 Session OPTION LHE Maintenance Training

4007 1 Session OPTION Lift Planning - Lift Supervisor Training

CONTRACT MINIMUM/MAXIMUM QUANTITY AND CONTRACT VALUE

The minimum quantity and contract value for all orders issued against this contract shall not be less than the minimum quantity and contract value stated in the following table. The maximum quantity and contract value for all orders issued against this contract shall not exceed the maximum quantity and contract value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

$5,000.00 $475,000.00

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government 0002 N/A N/A N/A Government 0003 N/A N/A N/A Government 0004 N/A N/A N/A Government 0005 N/A N/A N/A Government 0006 N/A N/A N/A Government 0007 N/A N/A N/A Government 1001 N/A N/A N/A Government 1002 N/A N/A N/A Government 1003 N/A N/A N/A Government 1004 N/A N/A N/A Government 1005 N/A N/A N/A Government 1006 N/A N/A N/A Government 1007 N/A N/A N/A Government 2001 N/A N/A N/A Government 2002 N/A N/A N/A Government 2003 N/A N/A N/A Government 2004 N/A N/A N/A Government 2005 N/A N/A N/A Government 2006 N/A N/A N/A Government 2007 N/A N/A N/A Government 3001 N/A N/A N/A Government 3002 N/A N/A N/A Government 3003 N/A N/A N/A Government 3004 N/A N/A N/A Government 3005 N/A N/A N/A Government 3006 N/A N/A N/A Government 3007 N/A N/A N/A Government 4001 N/A N/A N/A Government 4002 N/A N/A N/A Government 4003 N/A N/A N/A Government 4004 N/A N/A N/A Government 4005 N/A N/A N/A Government 4006 N/A N/A N/A Government 4007 N/A N/A N/A Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 15-NOV-2021 TO

31-OCT-2022

N/A FOUNTAIN CITY SERVICE BASE

AARON PIPELOW

431 NORTH SHORE DRIVE

FOUNTAIN CITY WI 54629-0397

651-290-5166

965605

0002 POP 15-NOV-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 15-NOV-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 15-NOV-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 15-NOV-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

0006 POP 15-NOV-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

0007 POP 15-NOV-2021 TO

N/A (SAME AS PREVIOUS LOCATION)

1001 POP 01-NOV-2022 TO

31-OCT-2023

N/A (SAME AS PREVIOUS LOCATION)

1002 POP 01-NOV-2022 TO

N/A (SAME AS PREVIOUS LOCATION)

1003 POP 01-NOV-2022 TO

N/A (SAME AS PREVIOUS LOCATION)

1004 POP 01-NOV-2022 TO

N/A (SAME AS PREVIOUS LOCATION)

1005 POP 01-NOV-2022 TO

N/A (SAME AS PREVIOUS LOCATION)

1006 POP 01-NOV-2022 TO

N/A (SAME AS PREVIOUS LOCATION)

1007 POP 01-NOV-2022 TO

N/A (SAME AS PREVIOUS LOCATION)

2001 POP 01-NOV-2023 TO

31-OCT-2024

N/A (SAME AS PREVIOUS LOCATION)

2002 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

2003 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

2004 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

2005 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

2006 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

2007 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

3001 POP 01-NOV-2024 TO

31-OCT-2025

N/A (SAME AS PREVIOUS LOCATION)

3002 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

3003 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

3004 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

3005 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

3006 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

3007 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

4001 POP 01-NOV-2025 TO

31-OCT-2026

N/A (SAME AS PREVIOUS LOCATION)

4002 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

4003 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

4004 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

4005 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

4006 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

4007 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-21 Basic Safeguarding of Covered Contractor Information Systems

JUN 2016

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

OCT 2020

52.212-1 Instructions to Offerors--Commercial Items SEP 2021 52.212-3 Offeror Representations and Certifications--Commercial

Items

FEB 2021

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Antiterrorism Awareness Training for Contractors. FEB 2019 252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2021

252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017 252.225-7048 Export-Controlled Items JUN 2013 252.225-7050 Disclosure of Ownership or Control by the Government of a

Country that is a State Sponsor of Terrorism

SEP 2021

252.225-7974 (Dev) Representation Regarding Business Operations with the Maduro Regime (DEVIATION 2020-O0005)

FEB 2020

252.232-7010 Levies on Contract Payments DEC 2006 252.232-7017 Accelerating Payments to Small Business Subcontractors--

Prohibition on Fees and Consideration

APR 2020

252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Items JAN 2021 252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

FAR CLAUSE 52.212-2 IS NOT APPLICABLE TO THIS SOLICITATION, EVALUATION AND

AWARD WILL BE BASED ON THE FOLLOWING:

The Government will award a purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government will use a comparative evaluation process as defined in FAR 13.106- 2(b)(3) using the below factors:

EVALUATION FACTORS

The Government will evaluate the following items:

TECHNICAL

Qualifications/Experience of Personnel: The offeror must provide information demonstrating the qualifications of personnel to meet the requirements as defined in paragraph 4c, to include:

• A listing of all personnel who will be assigned to perform as primary or as back-up for the required services.

• Resume of personnel, including recent work experience and education. Provide copies of degrees and training (Qualified personnel must show documented proof of at least (10) years of experience in the field of load handling equipment operation and/or training and experience in training of load handling principals. Must be certified by a commercial qualifying / certifying organization in accordance with 29 CFR 1926 subpart cc (1926.1427). Must be certified as NCCCO level I and Level II rigger.

• Provide a sample lesson plan for Qualified Level I Rigger Training that addresses (at a minimum) the key points as outlined in SOW paragraph 4d.

PAST PERFORMANCE

PRICE

Award and Selection:

Following receipt of quotes, the Government will perform an evaluation using a comparative analysis of the services quoted, in an impartial manner. The Government intends to compare what has been quoted to one another to select the service that is best suited to fulfill the requirement. The evaluation factors outlined in this request for quote will determine suitability.

The Government anticipates selecting the best-suited service from the contractor who provides the lowest price based on initial quotes, without engaging in exchanges with contractors. Contractors may submit more than one quote; however, contractors are strongly encouraged to submit their best technical solutions and price in response to this request for quote.

Once the Government determines there is/are a contractor(s) that can provide a product/service best-suited to meet the requirements of this request for quote, the government reserves the right to communicate with only those contractors quoting the best-suited service to address any remaining issues.

(End of provision)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (SEP 2021)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L.

109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

XX (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (JUN 2020) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (SEP 2021) (15 U.S.C. 657a).

____ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (SEP 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (13) [Reserved]

XXX (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2021) of 52.219-9.

____ (18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (19) 52.219-14, Limitations on Subcontracting (SEP 2021) (15 U.S.C. 657s).

____ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (SEP 2021) (15 U.S.C.

657f).

XX (22) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (SEP 2021) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (SEP 2021) (15 U.S.C. 637(m)).

____ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (SEP 2021) (15 U.S.C. 637(m)).

____ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

XX (27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

____(28) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JAN 2020) (E.O. 13126).

XX (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

XX (30)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

XX (31)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

XX (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

XX (33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

____ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

XX (35)(i) 52.222-50, Combating Trafficking in Persons (OCT 2020) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (36) 52.222-54, Employment Eligibility Verification (OCT 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(JUN 2016) (E.O. 13693).

____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-14.

____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

____ (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-16.

XX (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O.

13513).

____ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

____ (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (48) 52.225-1, Buy American--Supplies (JAN 2021) (41 U.S.C. chapter 83).

____ (49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (JAN 2021) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (JAN 2021) of 52.225-3.

____ (iii) Alternate II (JAN 2021) of 52.225-3.

____ (iv) Alternate III (JAN 2021) of 52.225-3.

____ (50) 52.225-5, Trade Agreements (OCT 2019) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C.

5150).

____ (55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

____ (56) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (57) 52.232-30, Installment Payments for Commercial Items (JAN 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

XX (58) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31 U.S.C. 3332).

____ (59) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (JUL 2013) (31 U.S.C. 3332).

____ (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

____ (62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (63)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C.

55305 and 10 U.S.C. 2631).

____ (ii) Alternate I (APR 2003) of 52.247-64.

____ (iii) Alternate II (FEB 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

XX (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

XX (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

XX (7) 52.222-55, Minimum Wages Under Executive Order 13658 (NOV 2020) (E.O. 13658).

XX (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (JUN 2020) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) _____ (A) 52.222-50, Combating Trafficking in Persons (OCT 2020) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (NOV 2020) (E.O. 13658).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.216-18 ORDERING. (AUG 2020)

(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from date of contract awardthrough contract completion.

(b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control.

(c) A delivery order or task order is considered "issued" when--

(1) If sent by mail (includes transmittal by U.S. mail or private delivery service), the Government deposits the order in the mail;

(2) If sent by fax, the Government transmits the order to the Contractor's fax number; or

(3) If sent electronically, the Government either--

(i) Posts a copy of the delivery order or task order to a Government document access system, and notice is sent to the Contractor; or

(ii) Distributes the delivery order or task order via email to the Contractor's email address.

(d) Orders may be issued by methods other than those enumerated in this clause only if authorized in the contract.

52.216-19 ORDER LIMITATIONS (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than one (1) training session, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor -

(1) Any order for a single item in excess of two (2) training sessions;

(2) Any order for a combination of items in excess…