A02_19T0058_13_LD4_DEWATER_MECHANICAL_PARTS_ANCHOR_BAR_PINS_AND_PLATE.PDF
PDF 92 KB Posted
- Attached to
- Miter Gate Parts
- Solicitation number
- W912ES19T0058
About this file
Anchor Bar Pins and Plate Drawings
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
+.002
+.003
0.50 x 45 DEGREE CHAMFER
OVERALL LENGTH
1-8UNC x 2.0 DEEP
7.50 7.250
0.38
11.13
+.002
+.003
0.50 x 45 DEGREE CHAMFER
OVERALL LENGTH
1-8UNC x 2.0 DEEP
0.38
11.13
P A
G E o f 1
7.75
UNLESS OTHERWISE NOTED.
FINISH ALL SURFACES TO 63 MICRO INCHES
ALL DIMENSIONS IN INCHES (+/-)0.05 UNLESS NOTED.
NOTES:
1.00
9.50
18.00
4.75
9.00
0.50
12.00
18.00
6.00
7.25
9.00 7.25 DIA
-.000
+.003,
7.25 -.000
+.003,
7.25 DIA
L4DEWATERMechPARTS.dgn
ANCHOR BAR PINS AND ANCHOR PLATES.pdf revision 03/26/2019
QUANTITY = 2 WT/EA= 25.5 LB
AISI 4340 STEEL
INNER ANCHOR BAR PLATE
QUANTITY = 2 WT/EA= 14.5 LB
AISI 4340 STEEL
OUTER ANCHOR BAR PLATE
7.50
QUANTITY = 1 WT/EA=130 LB
UNS S17400 STEEL 350-400 BHN
MODIFIED ANCHOR BAR PIN BLANK 21/10-P1
QUANTITY = 7 WT/EA=130 LB
UNS S17400 STEEL 350-400 BHN
ANCHOR BAR PIN BLANK 21/10-P1
MACHINED TO CORRECT DIAMETER
7.250 INCHES. THE PIN WILL BE FURTHER
ARE NOT KNOWN. THE TARGET DIAMETER WAS
(LINE BORED) AND THE EXACT DEMINSIONS
THE HOLE FOR THIS PIN WAS FIELD MODIFIED
FURTHER MACHINED TO CORRECT DIAMETERS
THEY WILL BE MEASURED ON SITE AND THE PINS WILL BE
THE HOLES FOR THESE PINS ARE NOMINALLY 7.000 INCHES
File details come from the government source that posted it.