A02_16-T-0119_Liebherr_946_specs.pdf

Crawler excavator

R 946

Motor:

220 kW / 299 HP

Stage IV

Operating Weight:

38,750 – 43,450 kg

Bucket Capacity:

1.00 – 2.50 m3

R 946 Litronic2

R 946 Litronic

Motor:

220 kW / 299 HP

Stage IV

Operating Weight:

38,750 – 43,450 kg

Bucket Capacity:

1.00 – 2.50 m³

Performance Performance, precision and responsiveness

R 946 Litronic 3

Maintainability Simplified daily checks, longer maintenance intervals

Reliability Result of ongoing improvements

Comfort Spacious, ergonomic and with high-visibility

Efficiency High level of productivity for a lower overall operating cost

R 946 Litronic4

Performance, precision and responsiveness

Performance

R 946 Litronic 5

Advanced techniques heighten performance In its design offices, Liebherr combines the technological know-how of each area to create consistent and optimised integrated systems. Liebherr’s electronics, positive control hydraulics, and even the engines are designed from the start to be intercon-nected and generate optimum operating power with fast and fluid movements.

Positive Control hydraulic system Two working pumps for maximum excavation power and travel power, and a pump serving the rotation circuit provides power to the components involved. Thanks to the positive control sys-tem, the combined movements are optimised for each different work operation, whether this be levelling, extraction / loading or lifting, with or without travel.

Particularly fast work cycles The work cycles of the R 946 are very fast thanks to the large sized transmission components. For example, the uppercar-riage’s swing drive can quickly reach its maximum speed with a high swing torque.

Operating pressure Maximum digging and break-out forces can be reached thanks to the level of hydraulic pressure, without applying temporary overpressure. Maximum forces are therefore guaranteed con-tinuously during the whole working phase to achieve a high level of production.

Liebherr Engine

• New Final Tier 4/Stage IV engine with

SCR exhaust gas after-treatment system

• Designed specifically for construction applications

• Liebherr common rail injection system for optimised output

• Automatic fuel-saving idling system

• Two-stage turbocharging with intercooler, for increased power at low revs and reduced fuel consumption

Wide range of operational possibilities

• Large number of equipment variants

• Versatile selection of undercarriage variants

• Attachments for all applications: short attachments for mass extractions, and long-reach, standard, luffing jib attachments

Undercarriage

• Robust design for greater resistance and a better distribution of forces

• Easy and safe transport thanks to integrated securing hooks

• Three different types of undercarriages, one with variable gauge, adapted to differ-ent operating configurations and transport conditions

R 946 Litronic6

Efficiency

High level of productivity for a lower overall operating cost

R 946 Litronic 7

Liebherr

Lubricants

• Liebherr lubricants are specially developed for application in Liebherr earth moving and material handling machines and guarantee a long working life whilst simultaneously delivering the highest possible performance

• Being designed especially for your Liebherr machines, Liebherr lubricants contribute significantly to lowering your operating and maintenance costs.

Modular quick-change system made by Liebherr

• Likufix – connects all hydraulically mounted tools without having to leave the opera-tor’s cab, maximum productivity due to tool change being performed in a matter of seconds

• The suitable digging tool for every applica-tion. Your machine is a multifunctional tool carrier and will pay for itself very quickly indeed

• Mechanic and hydraulic Liebherr quick-change adapter

Less fuel The new 6-cylinder Liebherr engine, pursuant to the Final 4

Tier / Stage IV emission standards, comprises a diesel exhaust fluid injection device (SCR) for the after-treatment of exhaust gases, with no need for a particle filter. Associated with the latest technological advances in hydraulics, this engine con-sumes less fuel, both in terms of hours of operation and in terms of tons of material moved.

Increased productivity Clearly enhanced performance and lower consumption, all in a comfortable and ergonomic work environment, lead to remark-able gains in productivity in all operating configurations.

Simplified and lower-cost maintenance Non-slip platforms and ergonomic handles allow fast and easy access to all maintenance points not accessible from the ground. The absence of a particle filter reduces maintenance time, the cost of spare parts and filter regeneration operations.

Electronic power control This control system allows the engine power to be effectively and optimally converted, from an energetic point of view, into hydraulic power. This is as a result of greater forces, a faster working speed and a lower fuel consumption.

Liebherr tools

• Wide range of tools suitable for every type of application

• Tools designed for maximum productivity and durability

• Shape of buckets designed to assist the filling and stability of bulky materials during the transport stages

• Hydraulic quick coupler system

R 946 Litronic8

Reliability

Result of ongoing improvements

R 946 Litronic 9

Spare parts service

• Any spare parts required are available within

24 hours – worldwide. And that means high operational readiness of the machines, wherever, whenever

• Over 80,000 spare parts in stock at all times

Key technologies –

Made by Liebherr

• Perfect matching of the components to construction machine operations

• Engine, hydraulic pumps, transfer gears, travel drives, slewing drives, slewing rings, and electronic components – all from the same source

• Main steel components, such as undercar-riage, equipment modules, and slewing superstructure, all designed by Liebherr

Quality in the minutest details Robust and large-sized components, optimal fitting of electri-cal and hydraulic lines, or an exemplary level of finishing are just some of the many criteria that ensure a maximum quality of manufacture and operability.

A top-of-the-range anti-corrosion protection A pre-assembly painting process guarantees that all painted parts are fully coated. The same quality can thus be guaran-teed for all special colours specifically requested by the most exacting customers. This process is also compatible with additional protection treatments for machines operating in an aggressive saline environment.

Perfect match The individual components of the power train, such as the die-sel engine, gears, swing drive, working pumps and hydraulic cylinders are designed and manufactured by Liebherr. This means that they are all compatible with each other in a global system, guaranteeing greater reliability and a longer service life.

Automatic control of functionality The operator can entirely focus on his job, because the inte-grated on-board electronic continuously performs a compari-son with pre-determined target data. Eventual deviations from the target parameters are shown on the display.

SCR system with diesel exhaust fluid (AdBlue®)

• Diesel exhaust fluid level indicator on the display

• Liebherr design > complies with

Final Tier 4/Stage IV standard

• No need for particle filters (DPF)

• Simple system for enhanced reliability and less maintenance

R 946 Litronic10

Spacious, ergonomic and with high-visibility

Comfort

LiMAM-Bild N°170794LLLLLLiLLiiiiiLLLLLLiLLLLLLiiiLiLiiLLLLiLLLLLiiiLLLLLiLLLLiLLLLLLLLLLLLLLLLLLLLLLiiLLLLiLLiiLLLLiLLLiLLLLLLLLLLLLiiMAMAMAMAMMAMAMMMMAMAMAMAMAMAMAMMAMAMMAMAMAMAMAMAMMMMAAMMAMAMMAMAMAAAMMMMMMMM MMM-MM-M-M-M-M-MMM-M-MMM-M-MMM--M BiiBBiBBBiBiBiiBiBiBBiBBiBiBiBiBiBB ldldldldddlddldldldldldddlddldldlddld NNNNNNNNNNNNNNNNNNNNN 1°°11°1°°1°°1°11°1°1111111111111 00707070070707070707070700007077700 979797997979797979797977979797979797999979779444444444444444444444

R 946 Litronic 11

A first class work space In this cab, the operator has a pneumatic seat, lots of space and a very comfortable work environment. Depending on the operator’s needs, the Liebherr Premium seat can also be cho-sen as an option. This seat offers maximum seating comfort thanks to its pneumatic lumbar support, its electronic weight-actuated height adjustor and its air-conditioning with activated charcoal and built-in fan. It is especially designed to meet the most exacting requirements of operators in terms of comfort, in all working situations.

Low noise level and vibrations To diminish fatigue at work and increase productivity, the acoustic power inside the operator’s cab is lower than 72 dB.

The cab is mounted on viscoelastic rivets to fully absorb the ex-cavator’s vibrations. The rubber flanges also support the pipes and actively participate in reducing external noise.

Uncompromised visibility The very large glazed surface area and minimal area of uprights guarantee optimal visibility from the operator’s platform, as well as a wide safety exit from the rear window for the operator’s safety and peace of mind.

Ergonomic proportional manipulators The proportional manipulators are very finely tuned controls for the sensitive, accurate and fluid operation of hydraulic tools.

This type of control is ideal for an R 946 used in a variety of applications.

Touch-screen display

• 7-inch touch-screen with colour display

• Wide range of adjustment, check, and monitoring possibilities

• Tough, reliable design (sealing tightness class IP 65)

• Video capacity with high resolution, repro-duces the image from the rear area monitor camera in best possible quality

New options

• Engine compartment lighting

• LED headlights with adjustable intensity

• 360° camera

• Follow me home (headlight cutoff delay)

• Windscreen wiper on bottom part

Heightened visibility

• Rear camera integrated in the counterweight as standard and camera for side area monitoring, for rear visibility and heightened operating safety

• Optimized design of the whole uppercarriage providing the operator with an improved field of vision

• Retractable laminated glass roof panel

• Secure emergency exit through the rear window

R 946 Litronic12

Maintainability

Simplified daily checks, longer maintenance intervals

R 946 Litronic 13

Simplified daily checks The daily checks were taken into account from the start of the design, to make them simpler, more accessible and shorter.

The engine oil or diesel exhaust fluid levels, for example, can be checked via the display in the operator’s cab. The automatic centralised lubrication system can save precious intervention time, while guaranteeing that the excavator is in optimum op-erating condition.

Longer service intervals The frequency of the service intervals is optimised to guaran-tee that each part is operating optimally and that the mainte-nance operations are only performed as necessary. Whether it is the interval for changing the hydraulic oil, which can be up to 8,000 hours, or the interval for changing the engine oil, every 1,000 hours, everything has been taken into account to reduce the frequency of interventions and thus limit the ma-chine’s downtime and reduce costs.

A maintenance-free exhaust gas treatment Thanks to its unique Liebherr design, the exhaust gas treatment is carried out in compliance with the Final Tier 4 / Stage IV stand-ards, without fitting a particle filter. This results in an output with no loss of productivity linked to the regeneration of these filters and, of course, there is no maintenance time or cost for spare parts associated with this technology.

Expert advice and service provisions Liebherr offers an expert advice service. Qualified person-nel will help you make the appropriate decisions to meet your needs: sales arguments based on the terrain, service agree-ments, advantageous repair alternatives, original parts man-agement, and remote data transfer for fleet management.

LiDAT data transfer system

• Complete fleet management, all from one source

• Optimized economical performance of the machine park thanks to detailed view of the distribution of operating states and times

• Reports on capacity commitment and the use of the machine park can be called up daily via the Web portal

• Precise location of the machine

• Regional delimitation and fixed downtimes increase safety and reliability

Hydraulic reservoir stop valve

• Easy and quick interruption of the oil circuit between hydraulic reservoir and hydraulic system

• No drainage of fluid necessary for service or repair work on the hydraulic system

Central lubrication system

• The fully-automatic central lubrication system, fitted as standard, allows for rapid maintenance: It saves time-consuming individual lubricating and downtime

• All the lubrication points on the superstructure of the vehicle and the attachment hydraulics are supplied, with the exception of the connecting plate

• Engine oil level visible on display

R 946 Litronic14

Long live progress with the R 946

Equipment

• Cast steel elements

• Greater resistance to stresses

• Longer service life

Tools

• Z-type Liebherr teeth for fast replacement

• Wide range of work tools

• Special heat treatment for low wear and tear of drive sprockets

• A wide range of undercarriages suited to each application

• Robust construction

R 946 Litronic 15

Operator’s cab

• Comfortable and ergonomic

• 7” high resolution color touchscreen for heightened readability

• Rear window with improved visibility

Visibility

• Rear camera integrated in the counterweight

• Optimized design of the whole uppercar-riage providing the operator with a better field of vision

• Large glazed surface area with secure emergency exit through the rear window

Automatic centralized lubrication - standard

• Reduced maintenance time

• Longer service life thanks to better lubrication

16 R 946 Litronic

Technical Data

Swing Drive Drive Liebherr swashplate motor

Transmission Liebherr compact planetary reduction gear

Swing ring Liebherr, sealed single race ball bearing swing ring, internal teeth

Swing speed 0 – 8.7 RPM stepless

Swing torque 115 kNm

Holding brake wet multi-disc (spring applied, pressure released)

Hydraulic System Hydraulic system Positive Control. Dual circuit hydraulic system for independent and need-based quantity allotment via the hydraulic pumps; sensor-guided. Features high system dynamics and sensibility provided by inte-grated system controlling. Independent circuit for rotation

Hydraulic pump for attachment and travel drive

Liebherr, variable displacement, swashplate double pump

Max. flow 2 x 305 l/min.

Max. pressure 380 bar for swing drive reversible, variable flow, swashplate pump, closed-loop circuit

Max. flow 205 l/min.

Max. pressure 400 bar

Pump management electronic pump management via the integrated system controlling (CAN-BUS) synchronous to the control block

Hydraulic tank 340 l

Hydraulic system max. 590 l

Hydraulic oil filter 1 full flow filter (10 μm) in return line with integrated fine filter area (5 μm)

Cooling system compact cooler, consisting of a water cooler, sand-wiched with hydraulic oil cooler, gearbox oil cooler, fuel cooler and after-cooler cores and hydrostatically driven fan

MODE selection adjustment of engine and hydraulic performance via a mode pre-selector to match application, e.g. for especially economical and environmentally friendly operation or for maximum digging performance and heavy-duty jobs

RPM adjustment stepless adjustment of engine output via RPM at each selected mode

Tool Control 10 preadjustable pump flows and pressures for add-on tools

Engine Rating per ISO 9249 220 kW (299 HP) at 1,800 RPM

Model Liebherr D936 A7

Type 6 cylinder in-line

Bore/Stroke 122/150 mm

Displacement 10.52 l

Engine operation 4-stroke diesel

Common-Rail, monoturbo

Exhaust gas treatment SCR with urea injection emission standard stage IV / Tier 4f

Cooling system water-cooled and integrated motor oil cooler, after-cooled and fuel cooled

Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements

Fuel tank 710 l

Urea tank 96 l

Electrical system

Voltage 24 V

Batteries 2 x 180 Ah/12 V

Starter 24 V/7.8 kW

Alternator three phase current 28 V/100 A

Engine idling sensor controlled

Motor management connection to the integrated excavator system con-trolling via CAN-BUS to the economical utilisation of the service that is available

Hydraulic Controls The controlling is conducted via the integrated excavator system technology, input and output modules, communicated via the CAN-BUS with the electronic central unit.

Power distribution via control valve with integrated safety valves

Servo circuit

Attachment and swing proportional via joystick levers

Travel – with proportionally functioning foot pedals and adjusted with a plugable lever

– speed pre-selection

Additional functions proportional regulation via foot pedals or rocker

R 946 Litronic 17

Operator’s Cab Cab ROPS safety cab structure with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a side window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspen-sion, sounddamping insulating, tinted laminated safety glass, separate window shades for the sunroof window and windscreen, 12 V plug, storage bins, lunchbox, cup holder

Operator’s seat Comfort seat, airsprung with automatic weight adjust-ment, vertical and horizontal seat damping including consoles and joysticks. Seat and armrests adjust-able separately and in combination, seat heating as standard

Control system arm consoles, swinging with the seat

Operation and displays large high-resolution colour display with selfexplana-tory operation via touchscreen, video, versatile adjust-ing, control and monitoring facilities, e.g. climate con-trol, implement and tool parameters

Air-conditioning standard automatic air-conditioning, ambient air func-tion, fast de-icing and demisting at the press of a button, air vents can be operated via a menu; ambient air and fresh air filters can be easily replaced and are accessible from the outside; heating-cooling unit, designed for extreme outside temperatures, sensors for solar radiation, inside and outside temperatures

Noise emission

ISO 6396 LpA (inside cab) = 72 dB(A)

2000/14/EC LWA (surround noise) = 105 dB(A)

Undercarriage Versions

NLC gauge 2,390 mm

LC gauge 2,590 mm

Drive Liebherr swashplate motors with integrated brake valves on both sides

Transmission Liebherr planetary reduction gears

Travel speed low range – 3.2 km/h high range – 5.9 km/h

Net drawbar pull on crawler 301 kN

Track components D 7, maintenance-free

Track rollers/Carrier rollers 9/2

Tracks sealed and greased

Track pads triple grouser

Holding brake wet multi-discs (spring applied, pressure released)

Brake valves integrated into travel motor

Lashing eyes integrated

Attachment Type combination of resistant steel plates and cast steels components

Hydraulic cylinders Liebherr cylinders with special seal-system, shock protection

Bearings sealed, low maintenance

Lubrication automatic central lubrication system (except link and tilt geometry)

Hydraulic connections pipes and hoses equipped with SAE splitflange connections

Bucket standard equipped with Liebherr tooth system

18 R 946 Litronic

Dimensions

W

X

V

Z

U

L

D

E

A

H

K

G

B

S

N

Q

P

C

R0270

W

X

V

Z

U

L

D

E

A

H

K

G

B

S

N

Q

P

C

R0271

R 946 Litronic 19

NLC mm

A* 2,995

C 3,185

D 3,520

E 3,550

H 2,830

K 1,220

L 4,108

P 1,070

Q 535

S 2,390

U 5,030

N 500 600 750 900

B 2,952 2,990 3,140 3,290

G 2,990 2,990 3,255 3,255

Z 6,040

* without door stop device and spacer

LC mm

A* 2,995

C 3,185

D 3,520

E 3,550

H 2,830

K 1,220

L 4,108

P 1,070

Q 535

S 2,590

U 5,030

N 500 600 750 900

B 3,155 3,190 3,340 3,490

G 3,190 3,190 3,445 3,455

Z 6,040

* without door stop device and spacer

Stick length mm

Mono boom 6.45 m mm

Two-piece boom

4.30 m mm

Straight mono boom

6.80 m mm

V 2.10 9,950 – –

2.60 9,400 7,650 7,050

2.90 9,150 7,400 6,800

3.30 8,750 7,100 6,500

4.10 – 6,200 5,650

W 2.10 3,250 – –

2.60 3,250 2,950 3,000

2.90 3,250 3,000 3,050

3.30 3,250 3,150 3,200

4.10 – 3,200 3,250

X 2.10 11,400 – –

2.60 11,350 12,400 11,800

2.90 11,350 12,400 11,800

3.30 11,350 12,450 11,850

4.10 – 12,450 11,850

20 R 946 Litronic

Backhoe Bucket with Mono Boom 6.45 m and Counterweight 7.7 t

Digging Envelope with quick coupler 1 2 3 4

Stick length m 2.10 2.60 2.90 3.30

Max. digging depth m 6.50 7.00 7.30 7.70

Max. reach at ground level m 10.40 10.85 11.15 11.55

Max. dumping height m 6.70 6.95 7.10 7.30

Max. teeth height m 10.30 10.60 10.75 10.95

Operating Weight and Ground Pressure

The operating weight includes the basic machine with counterweight 7.7 t, mono boom

6.45 m, stick 2.60 m, quick coupler SW66 and bucket 1.75 m3 (1,420 kg).

Undercarriage NLC LC

Pad width mm 500 600 750 500 600 750

Weight kg 38,750 39,200 39,850 38,850 39,300 39,950

Ground pressure kg/cm2 0.88 0.74 0.60 0.88 0.74 0.60

R0268

4 2 0681012

303540 2025 1015 m

05 ft

-2

-4

-6

-8

-10

-15

-20

-25

-5 mft

2 3

Digging Forces with quick coupler 1 2 3 4

Digging force ISO kN 216 191 179 164 t 22.1 19.5 18.2 16.7

Breakout force ISO kN 208 208 208 208 t 21.2 21.2 21.2 21.2 without quick coupler

Digging force ISO kN 229 201 187 172 t 23.3 20.5 19.1 17.5

Breakout force ISO kN 238 238 238 238 t 24.2 24.2 24.2 24.2

Max. breakout force ISO with ripper bucket and without quick coupler 300 kN (30.6 t)

Buckets Machine stability per ISO 10567* (75 % of tipping capacity)

C u tt in g w id th

C a p a c it y

IS

O

W e ig h t3

W e ig h t4

NLC-Undercarriage

Stick length (m)

LC-Undercarriage

2.10 2.60 2.90 3.30 2.10 2.60 2.90 3.30 2.10 2.60 2.90 3.30 2.10 2.60 2.90 3.30 mm m3 kg kg without quick coupler with quick coupler without quick coupler with quick coupler

S T

D

1,050 1.00 1,220 1,150 x x x x x x x x x x x x x x x x

1,200 1.25 1,280 1,240 x x x x x x x x x x x x x x x x

1,350 1.50 1,370 1,330 x x x x x x x x x x x x x x x x

1,500 1.75 1,460 1,420 x x x y x x x y x x x x x x x x

1,650 2.00 1,580 1,540 x x y v x y y v x x x y x x y y

1,650 2.25 1,690 1,650 y y v Y y v v Y x y y v x y v v

1,850 2.50 1,810 1,770 v v Y Y v Y Y Y y v v Y y v v Y

H D

1,050 1.00 – 1,230 – – – – x x x x – – – – x x x x

1,200 1.25 1,380 1,340 x x x x x x x x x x x x x x x x

1,350 1.50 1,470 1,430 x x x x x x x x x x x x x x x x

1,500 1.75 1,560 1,520 x x x y x x y y x x x x x x x x

1,650 2.00 1,700 1,660 x y y v x y v v x x x y x x y y

1,650 2.25 1,820 1,780 y v v Y y v Y Y x y y v x y v v

1,850 2.50 1,990 1,950 v Y Y Y v Y Y – y v v Y y v Y Y

* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm

1) Standard bucket with teeth Z 50 3) Bucket for direct fitting

2) HD bucket with teeth Z 50 4) Bucket for fitting to quick coupler

Other backhoes available on request

Max. material weight x = ≤ 2.0 t/m3, y = ≤ 1.8 t/m3, v = ≤ 1.5 t/m3, Y = ≤ 1.2 t/m3, – = not authorized

Optional: heavy counterweight

(heavy counterweight increases the operating weight by 1,300 kg and ground pressure by

0.03 kg/cm2)

R 946 Litronic 21

Lift Capacities with Mono Boom 6.45 m and Counterweight 7.7 t

Stick 2.10 m m

Under-carriage

3.0 m 4.5 m 6.0 m 7.5 m 9.0 m 10.5 m

12.0

NLC

LC

10.5

NLC

LC

9.0

NLC

LC

7.5

NLC 10.4 11.1* 8.6 9.5*

6.7

LC 11.1* 11.1* 9.3 9.5*

6.0

NLC 10.1 11.6* 7.1 10.6* 6.8 9.0*

7.7

LC 10.9 11.6* 7.7 10.6* 7.3 9.0*

4.5

NLC 14.2 17.4* 9.5 13.0* 6.9 11.0* 5.8 8.9*

8.3

LC 15.5 17.4* 10.3 13.0* 7.4 11.0* 6.3 8.9*

3.0

NLC 8.9 14.4* 6.6 11.2 5.4 9.1

8.6

LC 9.7 14.4* 7.1 11.3 5.8 9.1

1.5

NLC 8.4 15.2 6.3 10.9 5.2 8.9

8.6

LC 9.2 15.2 6.9 11.0 5.7 9.0

NLC 12.3 14.9* 8.2 15.0 6.2 10.8 5.4 9.2

8.4

LC 13.7 14.9* 9.0 15.0 6.7 10.8 5.9 9.3

– 1.5

NLC 12.4 18.6* 8.2 14.7* 6.2 10.8 5.9 10.2

7.9

LC 13.8 18.6* 9.0 14.7* 6.8 10.8 6.4 10.2

– 3.0

NLC 18.4* 18.4* 12.7 16.0* 8.4 12.7* 7.1 10.3*

6.9

LC 18.4* 18.4* 14.1 16.0* 9.3 12.7* 7.7 10.3*

– 4.5

NLC 11.1* 11.1* 8.8* 8.8*

5.4

LC 11.1* 11.1* 8.8* 8.8*

– 6.0

NLC

LC

Stick 2.90 m

NLC

LC

10.5

NLC

LC

9.0

NLC 7.2* 7.2*

6.2

LC 7.2* 7.2*

7.5

NLC 7.3 7.7* 6.5* 6.5*

7.6

LC 7.7* 7.7* 6.5* 6.5*

6.0

NLC 7.2 9.5* 5.7 6.2*

8.5

LC 7.8 9.5* 6.2* 6.2*

4.5

NLC 14.9 15.2* 9.7 11.8* 6.9 10.2* 5.2 7.3* 5.1 6.1*

9.1

LC 15.2* 15.2* 10.5 11.8* 7.5 10.2* 5.6 7.3* 5.5 6.1*

3.0

NLC 13.3 18.9* 9.0 13.5* 6.6 11.0* 5.0 8.5 4.7 6.3*

9.4

LC 14.7 18.9* 9.9 13.5* 7.2 11.0* 5.5 8.5 5.1 6.3*

1.5

NLC 12.4 15.9* 8.5 14.8* 6.3 10.9 4.9 8.4 4.6 6.6*

9.4

LC 13.7 15.9* 9.3 14.8* 6.9 11.0 5.3 8.4 5.0 6.6*

NLC 12.1 18.7* 8.2 14.9 6.1 10.7 4.8 8.2 4.7 7.3*

9.2

LC 13.4 18.7* 9.0 15.0 6.6 10.7 5.2 8.3 5.1 7.3*

– 1.5

NLC 13.3* 13.3* 12.1 20.0* 8.1 14.8 6.0 10.6 5.0 8.4*

8.7

LC 13.3* 13.3* 13.5 20.0* 8.9 14.9 6.6 10.6 5.5 8.4*

– 3.0

NLC 22.5* 22.5* 12.3 17.9* 8.2 13.8* 6.1 10.5* 5.8 9.6*

7.9

LC 22.5* 22.5* 13.7 17.9* 9.0 13.8* 6.7 10.5* 6.3 9.6*

– 4.5

NLC 18.0* 18.0* 12.8 14.2* 8.5 10.7* 7.6 9.1*

6.6

LC 18.0* 18.0* 14.1 14.2* 9.3 10.7* 8.3 9.1*

– 6.0

NLC

Stick 3.30 m

NLC

LC

10.5

NLC

LC

9.0

NLC 6.1* 6.1*

6.8

LC 6.1* 6.1*

7.5

NLC 7.4 8.7* 5.5* 5.5*

8.1

LC 8.0 8.7* 5.5* 5.5*

6.0

NLC 7.3 9.0* 5.3* 5.3*

8.9

LC 7.9 9.0* 5.3* 5.3*

4.5

NLC 9.8 11.2* 7.0 9.7* 5.2 8.7 4.7 5.2*

9.5

LC 10.7 11.2* 7.6 9.7* 5.6 8.7 5.1 5.2*

3.0

NLC 13.7 17.8* 9.1 12.9* 6.6 10.6* 5.0 8.5 4.4 5.4*

9.7

LC 15.0 17.8* 10.0 12.9* 7.2 10.6* 5.5 8.6 4.8 5.4*

1.5

NLC 12.5 19.8* 8.5 14.4* 6.3 10.9 4.8 8.3 4.3 5.6*

9.8

LC 13.9 19.8* 9.3 14.4* 6.9 11.0 5.3 8.4 4.7 5.6*

NLC 12.1 19.7* 8.1 14.9 6.0 10.7 4.7 8.2 4.3 6.2*

9.6

LC 13.4 19.7* 8.9 15.0 6.6 10.7 5.1 8.2 4.7 6.2*

– 1.5

NLC 12.8* 12.8* 12.0 20.4* 8.0 14.7 5.9 10.5 4.7 8.2 4.6 7.0*

9.1

LC 12.8* 12.8* 13.3 20.4* 8.8 14.8 6.5 10.6 5.1 8.2 5.1 7.0*

– 3.0

NLC 20.4* 20.4* 12.2 18.6* 8.0 14.2* 6.0 10.6 5.3 8.6*

8.3

LC 20.4* 20.4* 13.5 18.6* 8.8 14.2* 6.5 10.6 5.8 8.6*

– 4.5

NLC 20.3* 20.3* 12.5 15.4* 8.3 11.7* 6.7 9.0*

7.1

LC 20.3* 20.3* 13.9 15.4* 9.1 11.7* 7.3 9.0*

– 6.0

NLC

Stick 2.60 m

NLC

LC

10.5

NLC

LC

9.0

NLC

LC

7.5

NLC 7.5* 7.5*

7.3

LC 7.5* 7.5*

6.0

NLC 10.3 10.9* 7.2 10.0* 6.1 7.1*

8.2

LC 10.9* 10.9* 7.8 10.0* 6.6 7.1*

4.5

NLC 14.7 16.0* 9.7 12.3* 6.9 10.5* 5.4 7.1*

8.8

LC 16.0* 16.0* 10.5 12.3* 7.5 10.5* 5.8 7.1*

3.0

NLC 13.1 19.7* 9.0 13.9* 6.6 11.3* 5.1 8.6 5.0 7.2*

9.1

LC 14.4 19.7* 9.8 13.9* 7.2 11.3* 5.5 8.6 5.4 7.2*

1.5

NLC 12.3 12.8* 8.5 15.1* 6.3 11.0 4.9 8.4 4.8 7.7*

9.1

LC 12.8* 12.8* 9.3 15.1* 6.9 11.0 5.4 8.4 5.3 7.7*

NLC 12.2 17.9* 8.2 15.0 6.1 10.7 4.9 8.5*

8.9

LC 13.5 17.9* 9.0 15.0 6.7 10.8 5.4 8.5*

– 1.5

NLC 13.5* 13.5* 12.2 19.5* 8.1 14.9 6.1 10.7 5.3 9.2

8.4

LC 13.5* 13.5* 13.6 19.5* 8.9 14.9 6.7 10.7 5.8 9.3

– 3.0

NLC 21.6* 21.6* 12.5 17.2* 8.3 13.4* 6.3 10.0* 6.3 9.9*

7.5

LC 21.6* 21.6* 13.8 17.2* 9.1 13.4* 6.8 10.0* 6.8 9.9*

– 4.5

NLC 13.0 13.2* 8.7 9.7* 8.4 9.1*

6.2

LC 13.2* 13.2* 9.5 9.7* 9.1* 9.1*

– 6.0

NLC

LC

Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

The load values are quoted in tons (t) at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 600 mm wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity

(indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 625 kg. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.

According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories.

22 R 946 Litronic with Straight Mono Boom 6.80 m and Counterweight 7.7 t

Digging Envelope with quick coupler 1 2 3 4

Stick length m 2.60 2.90 3.30 4.10

Max. digging depth m 6.25 6.55 6.95 7.75

Max. reach at ground level m 11.35 11.65 12.00 12.75

Max. dumping height m 8.50 8.70 9.00 9.40

Max. teeth height m 12.35 12.55 12.85 13.25

Operating Weight and Ground Pressure

The operating weight includes the basic machine with counterweight 7.7 t, straight mono boom 6.80 m, stick 2.60 m, quick coupler SW66 and bucket 1.50 m3 (1,330 kg).

Undercarriage NLC LC

Pad width mm 500 600 750 500 600 750

Weight kg 38,750 39,200 39,850 38,850 39,300 39,950

Ground pressure kg/cm2 0.88 0.74 0.60 0.88 0.74 0.60

R0267

4 2 068101214

30354045 2025 1015 m

05 ft

-2

-4

-6

-8

-10

-15

-20

-25

-5 mft

1 2

Digging Forces with quick coupler 1 2 3 4

Digging force ISO kN 191 179 164 142 t 19.4 18.2 16.8 14.4

Breakout force ISO kN 208 208 208 208 t 21.2 21.2 21.2 21.2 without quick coupler

Digging force ISO kN 201 187 172 147 t 20.5 19.1 17.5 15.0

Breakout force ISO kN 238 238 238 238 t 24.2 24.2 24.2 24.2

Max. breakout force ISO with ripper bucket and without quick coupler 300 kN (30.6 t)

Buckets Machine stability per ISO 10567* (75 % of tipping capacity)

C u tt in g w id th

C a p a c it y

IS

O

W e ig h t3

W e ig h t4

2.60 2.90 3.30 4.10 2.60 2.90 3.30 4.10 2.60 2.90 3.30 4.10 2.60 2.90 3.30 4.10 mm m3 kg kg without quick coupler with quick coupler without quick coupler with quick coupler

S T

D

1,050 1.00 1,220 1,150 x x x x x x x x x x x x x x x x

1,200 1.25 1,280 1,240 x x x x x x x y x x x x x x x x

1,350 1.50 1,370 1,330 x x x y x x y v x x x y x x x y

1,500 1.75 1,460 1,420 x y v v y y v Y x x y v x y y v

1,650 2.00 1,580 1,540 y v Y Y v v Y – y y v Y y v v Y

1,650 2.25 1,690 1,650 v Y Y – Y Y – – v v Y Y v Y Y –

1,850 2.50 1,810 1,770 Y Y – – Y – – – v Y Y – Y Y – –

H D

1,050 1.00 – 1,230 – – – – x x x x – – – – x x x x

1,200 1.25 1,380 1,340 x x x x x x x y x x x x x x x x

1,350 1.50 1,470 1,430 x x y v x x y v x x x y x x x v

1,500 1.75 1,560 1,520 y y v Y y v v Y x x y v x y v Y

1,650 2.00 1,700 1,660 v v Y – v Y Y – y y v Y y v Y Y

1,650 2.25 1,820 1,780 Y Y Y – Y Y – – v v Y – v Y Y –

1,850 2.50 1,990 1,950 Y – – – – – – – Y Y – – Y – – –

* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm

1) Standard bucket with teeth Z 50 3) Bucket for direct fitting

2) HD bucket with teeth Z 50 4) Bucket for fitting to quick coupler

Other backhoes available on request

Max. material weight x = ≤ 2.0 t/m3, y = ≤ 1.8 t/m3, v = ≤ 1.5 t/m3, Y = ≤ 1.2 t/m3, – = not authorized

Optional: heavy counterweight

(heavy counterweight increases the operating weight by 1,300 kg and ground pressure by

0.03 kg/cm2)

R 946 Litronic 23 with Straight Mono Boom 6.80 m and Counterweight 7.7 t

NLC

LC

10.5

NLC

LC

9.0

NLC 10.4 12.3* 8.7* 8.7*

6.5

LC 11.2 12.3* 8.7* 8.7*

7.5

NLC 10.4 12.1* 7.1 10.9* 6.5 7.7*

7.9

LC 11.2 12.1* 7.7 10.9* 7.1 7.7*

6.0

NLC 15.5 15.9* 9.9 12.8* 7.0 11.0* 5.4 7.2*

8.7

LC 15.9* 15.9* 10.8 12.8* 7.6 11.0* 5.9 7.2*

4.5

NLC 13.9 18.9* 9.3 13.9* 6.7 11.4 5.1 8.6 4.8 7.1*

9.3

LC 15.3 18.9* 10.1 13.9* 7.3 11.4* 5.5 8.6 5.2 7.1*

3.0

NLC 8.6 15.0* 6.4 11.0 4.9 8.4 4.5 7.1*

9.5

LC 9.4 15.0* 7.0 11.1 5.4 8.4 4.9 7.1*

1.5

NLC 8.2 14.9 6.1 10.7 4.8 8.3 4.4 7.4*

9.6

LC 9.0 15.0 6.7 10.8 5.2 8.3 4.8 7.4*

NLC 9.8* 9.8* 8.0 14.7 6.0 10.6 4.7 8.2 4.5 7.8

9.4

LC 9.8* 9.8* 8.7 14.7 6.5 10.6 5.2 8.2 4.9 7.8

– 1.5

NLC 12.1 16.0* 8.0 13.4* 5.9 10.5 4.9 8.0*

8.9

LC 13.4 16.0* 8.8 13.4* 6.5 10.6 5.3 8.0*

– 3.0

NLC 12.4 12.8* 8.1 11.0* 6.1 8.4* 5.7 6.9*

8.1

LC 12.8* 12.8* 8.9 11.0* 6.7 8.4* 6.2 6.9*

– 4.5

NLC

LC

– 6.0

NLC

NLC

LC

10.5

NLC 7.7* 7.7*

5.6

LC 7.7* 7.7*

9.0

NLC 10.5* 10.5* 6.3* 6.3*

7.5

LC 10.5* 10.5* 6.3* 6.3*

7.5

NLC 10.6 10.6* 7.3 10.0* 5.5 5.6*

8.7

LC 10.6* 10.6* 7.9 10.0* 5.6* 5.6*

6.0

NLC 10.1 11.8* 7.1 10.3* 5.2 8.7 4.7 5.3*

9.5

LC 11.0 11.8* 7.7 10.3* 5.6 8.8 5.1 5.3*

4.5

NLC 14.6 17.2* 9.5 13.1* 6.8 10.8* 5.1 8.6 4.2 5.2*

10.0

LC 15.9 17.2* 10.3 13.1* 7.4 10.8* 5.5 8.6 4.6 5.2*

3.0

NLC 12.9 19.2* 8.8 14.4* 6.4 11.1 4.9 8.4 4.0 5.3*

10.2

LC 14.3 19.2* 9.6 14.4* 7.0 11.1 5.3 8.4 4.3 5.3*

1.5

NLC 10.2* 10.2* 8.2 15.0 6.1 10.7 4.7 8.2 3.9 5.5*

10.3

LC 10.2* 10.2* 9.0 15.0 6.6 10.7 5.1 8.2 4.3 5.5*

NLC 11.8 12.5* 7.9 14.6 5.8 10.5 4.6 8.0 4.0 5.8*

10.0

LC 12.5* 12.5* 8.7 14.7 6.4 10.5 5.0 8.1 4.3 5.8*

– 1.5

NLC 8.7* 8.7* 11.8 17.9* 7.8 14.1* 5.8 10.4 4.6 8.0 4.2 6.4*

9.6

LC 8.7* 8.7* 13.1 17.9* 8.6 14.1* 6.3 10.4 5.0 8.1 4.6 6.4*

– 3.0

NLC 16.0* 16.0* 12.0 15.0* 7.9 12.2* 5.8 9.6* 4.8 6.7*

8.9

LC 16.0* 16.0* 13.3 15.0* 8.7 12.2* 6.4 9.6* 5.3 6.7*

– 4.5

NLC 10.7* 10.7* 8.2 8.9* 6.1 6.1* 5.4* 5.4*

7.7

LC 10.7* 10.7* 8.9* 8.9* 6.1* 6.1* 5.4* 5.4*

– 6.0

NLC

Stick 4.10 m

NLC

LC

10.5

NLC 5.2* 5.2*

6.9

LC 5.2* 5.2*

9.0

NLC 7.4* 7.4* 4.5* 4.5*

8.4

LC 7.4* 7.4* 4.5* 4.5*

7.5

NLC 7.4 8.2* 5.3 6.4* 4.1* 4.1*

9.5

LC 8.0 8.2* 5.8 6.4* 4.1* 4.1*

6.0

NLC 8.9* 8.9* 7.2 9.0* 5.3 8.1* 3.9* 3.9*

10.2

LC 8.9* 8.9* 7.8 9.0* 5.7 8.1* 3.9* 3.9*

4.5

NLC 13.6* 13.6* 9.8 12.0* 6.9 10.1* 5.1 8.6 3.9 5.4* 3.7 3.9*

10.7

LC 13.6* 13.6* 10.6 12.0* 7.5 10.1* 5.5 8.7 4.2 5.4* 3.9* 3.9*

3.0

NLC 13.6 18.5* 9.0 13.5* 6.5 10.9* 4.9 8.4 3.8 6.6 3.5 4.0*

10.9

LC 15.0 18.5* 9.8 13.5* 7.0 10.9* 5.3 8.4 4.1 6.6 3.8 4.0*

1.5

NLC 12.3 18.2* 8.3 14.7* 6.1 10.7 4.7 8.1 3.7 6.4 3.4 4.1*

11.0

LC 13.6 18.2* 9.1 14.7* 6.7 10.8 5.1 8.2 4.0 6.5 3.8 4.1*

NLC 5.1* 5.1* 11.7 15.6* 7.9 14.6 5.8 10.4 4.5 8.0 3.6 6.4 3.5 4.4*

10.8

LC 5.1* 5.1* 13.0 15.6* 8.7 14.7 6.4 10.4 4.9 8.0 3.9 6.4 3.8 4.4*

– 1.5

NLC 9.4* 9.4* 11.6 18.6* 7.7 14.4 5.6 10.2 4.4 7.9 3.7 4.8*

10.4

LC 9.4* 9.4* 12.9 18.6* 8.5 14.4 6.2 10.3 4.8 7.9 4.0 4.8*

– 3.0

NLC 14.4* 14.4* 11.7 16.9* 7.7 13.2* 5.6 10.2 4.4 7.9 4.1 5.6*

9.7

LC 14.4* 14.4* 13.0 16.9* 8.4 13.2* 6.2 10.2 4.9 7.9 4.5 5.6*

– 4.5

NLC 16.3* 16.3* 12.0 13.4* 7.8 10.7* 5.8 8.2* 4.8 5.7*

8.7

LC 16.3* 16.3* 13.3 13.4* 8.6 10.7* 6.3 8.2* 5.3 5.7*

– 6.0

NLC

NLC

LC

10.5

NLC 9.5* 9.5*

4.9

LC 9.5* 9.5*

9.0

NLC 10.5 11.6* 7.4* 7.4*

6.9

LC 11.3 11.6* 7.4* 7.4*

7.5

NLC 10.4 11.6* 7.2 10.5* 6.1 6.6*

8.2

LC 11.3 11.6* 7.8 10.5* 6.6 6.6*

6.0

NLC 14.5* 14.5* 10.0 12.3* 7.0 10.7* 5.1 7.0* 5.1 6.3*

9.0

LC 14.5* 14.5* 10.8 12.3* 7.6 10.7* 5.6 7.0* 5.5 6.3*

4.5

NLC 14.2 18.1* 9.4 13.6* 6.7 11.2* 5.0 8.6 4.5 6.1*

9.6

LC 15.6 18.1* 10.2 13.6* 7.3 11.2* 5.5 8.6 4.9 6.1*

3.0

NLC 8.7 14.8* 6.4 11.0 4.9 8.4 4.2 6.2*

9.8

LC 9.5 14.8* 6.9 11.1 5.3 8.4 4.6 6.2*

1.5

NLC 8.2 14.9 6.1 10.7 4.7 8.2 4.2 6.4*

9.9

LC 9.0 15.0 6.6 10.7 5.2 8.2 4.6 6.4*

NLC 11.3* 11.3* 7.9 14.6 5.9 10.5 4.6 8.1 4.3 6.9*

9.7

LC 11.3* 11.3* 8.7 14.7 6.5 10.5 5.1 8.1 4.7 6.9*

– 1.5

NLC 12.0 16.9* 7.9 13.8* 5.9 10.4 4.7 8.1 4.6 7.6*

9.2

LC 13.3 16.9* 8.7 13.8* 6.4 10.5 5.1 8.2 5.0 7.6*

– 3.0

NLC 12.2 13.8* 8.0 11.5* 6.0 9.0* 5.3 6.8*

8.4

LC 13.6 13.8* 8.8 11.5* 6.5 9.0* 5.7 6.8*

– 4.5

NLC 7.8* 7.8* 6.3* 6.3*

6.8

LC 7.8* 7.8* 6.3* 6.3*

– 6.0

NLC

LC

Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

The load values are quoted in tons (t) at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 600 mm wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity

(indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 625 kg. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.

According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories.

24 R 946 Litronic with Two-piece Boom 4.30 m and Counterweight 9.0 t

Digging Envelope with quick coupler 1 2 3 4

Stick length m 2.60 2.90 3.30 4.10

Max. digging depth m 7.40 7.70 8.10 8.85

Max. reach at ground level m 11.95 12.25 12.60 13.35

Max. dumping height m 9.80 10.05 10.45 10.95

Max. teeth height m 13.65 13.92 14.25 14.85

Operating Weight and Ground Pressure

The operating weight includes the basic machine with counterweight 9.0 t, two-piece boom

4.30 m, stick 2.60 m, quick coupler SW66 and bucket 1.25 m3 (1,240 kg).

Undercarriage NLC LC

Pad width mm 500 600 750 500 600 750

Weight kg 42,250 42,700 43,350 42,350 42,800 43,450

Ground pressure kg/cm2 0.95 0.81 0.66 0.95 0.81 0.66

R0269

4 2 068101214

30354045 2025 1015 m

05 ft

-2

-4

-6

-8

-10

-10

-15

-20

-25

-30

-5 mft

Digging Forces with quick coupler 1 2 3 4

Digging force ISO kN 191 179 164 142 t 19.4 18.2 16.8 14.4

Breakout force ISO kN 208 208 208 208 t 21.2 21.2 21.2 21.2 without quick coupler

Digging force ISO kN 201 187 172 147 t 20.5 19.1 17.5 15.0

Breakout force ISO kN 238 238 238 238 t 24.2 24.2 24.2 24.2

Max. breakout force ISO with ripper bucket and without quick coupler 300 kN (30.6 t)

Buckets Machine stability per ISO 10567* (75 % of tipping capacity)

C u tt in g w id th

C a p a c it y

IS

O

W e ig h t3

W e ig h t4

2.60 2.90 3.30 4.10 2.60 2.90 3.30 4.10 2.60 2.90 3.30 4.10 2.60 2.90 3.30 4.10 mm m3 kg kg without quick coupler with quick coupler without quick coupler with quick coupler

S T

D

1,050 1.00 1,220 1,150 x x x x x x x y x x x x x x x x

1,200 1.25 1,280 1,240 x x y v x y v Y x x x y x x x v

1,350 1.50 1,370 1,330 y v v Y y v Y – x x y v y y v Y

1,500 1.75 1,460 1,420 v Y Y – v Y – – y v v Y v v Y –

1,650 2.00 1,580 1,540 Y Y – – Y – – – v Y Y – Y Y – –

1,650 2.25 1,690 1,650 – – – – – – – – Y Y – – Y – – –

1,850 2.50 1,810 1,770 – – – – – – – – – – – – – – – –

H D

1,050 1.00 – 1,230 – – – – x x x v – – – – x x x x

1,200 1.25 1,380 1,340 x x y v x y v Y x x x y x x y v

1,350 1.50 1,470 1,430 y v v Y v v Y – x y y v y y v Y

1,500 1.75 1,560 1,520 v Y Y – Y Y – – y v v Y v v Y –

1,650 2.00 1,700 1,660 Y – – – – – – – v Y Y – Y Y – –

1,650 2.25 1,820 1,780 – – – – – – – – Y – – – – – – –

1,850 2.50 1,990 1,950 – – – – – – – – – – – – – – – –

* Indicated loads are based on ISO 10567 max. stick length, lifted 360° on firm

1) Standard bucket with teeth Z 50 3) Bucket for direct fitting

2) HD bucket with teeth Z 50 4) Bucket for fitting to quick coupler

Other backhoes available on request

Max. material weight x = ≤ 2.0 t/m3, y = ≤ 1.8 t/m3, v = ≤ 1.5 t/m3, Y = ≤ 1.2 t/m3, – = not authorized

R 946 Litronic 25 with Two-piece Boom 4.30 m and Counterweight 9.0 t

NLC

LC

10.5

NLC 14.3* 14.3* 10.4* 10.4*

5.5

LC 14.3* 14.3* 10.4* 10.4*

9.0

NLC 13.7* 13.7* 11.7 13.5* 7.8 8.6*

7.4

LC 13.7* 13.7* 12.5 13.5* 8.5 8.6*

7.5

NLC 14.5* 14.5* 11.6 13.7* 8.1 11.4* 6.0 7.8*

8.6

LC 14.5* 14.5* 12.4 13.7* 8.7 11.4* 6.5 7.8*

6.0

NLC 25.7* 25.7* 16.8 18.9* 11.4 14.2* 8.2 11.5* 5.6 9.4 5.0 7.5*

9.4

LC 25.7* 25.7* 18.0 18.9* 12.1 14.2* 8.9 11.5* 6.1 9.4 5.5 7.5*

4.5

NLC 21.8* 21.8* 16.2 19.3* 11.1 14.8* 8.2 11.7* 5.6 9.4 4.5 7.4*

9.9

LC 21.8* 21.8* 17.2 19.3* 11.8 14.8* 8.8 11.7* 6.1 9.4 4.9 7.4*

3.0

NLC 15.9 19.2* 10.8 14.7* 7.8 11.6* 5.5 9.3 4.2 7.4

10.1

LC 16.9 19.2* 11.6 14.7* 8.4 11.6* 6.0 9.3 4.6 7.4

1.5

NLC 14.6 20.1* 10.0 14.7* 7.3 11.5* 5.3 9.1 4.1 6.9*

10.2

LC 16.1 20.1* 10.9 14.7* 8.0 11.5* 5.8 9.1 4.5 6.9*

NLC 14.3* 14.3* 13.8 20.5* 9.4 14.8* 7.0 11.6* 5.1 8.9 4.2 6.0*

10.0

LC 14.3* 14.3* 15.2 20.5* 10.3 14.8* 7.6 11.6* 5.6 8.9 4.7 6.0*

– 1.5

NLC 24.3* 24.3* 13.5 20.6* 9.1 15.1* 6.7 11.7* 4.9 7.7* 4.6 4.7*

9.5

LC 24.3* 24.3* 14.9 20.6* 10.0 15.1* 7.3 11.7* 5.4 7.7* 4.7* 4.7*

– 3.0

NLC 26.1 28.9* 13.5 19.7* 9.0 14.5* 6.5 9.7* 4.0* 4.0*

8.7

LC 28.9* 28.9* 14.9 19.7* 9.9 14.5* 7.1 9.7* 4.0* 4.0*

– 4.5

NLC 24.1* 24.1* 13.9 16.5* 9.0 9.7* 5.5* 5.5*

6.9

LC 24.1* 24.1* 15.4 16.5* 9.7* 9.7* 5.5* 5.5*

– 6.0

NLC

NLC 10.4* 10.4*

3.9

LC 10.4* 10.4*

10.5

NLC 11.2* 11.2* 10.1* 10.1* 7.3* 7.3*

6.7

LC 11.2* 11.2* 10.1* 10.1* 7.3* 7.3*

9.0

NLC 10.5* 10.5* 8.1 9.7* 6.3* 6.3*

8.3

LC 10.5* 10.5* 8.7 9.7* 6.3* 6.3*

7.5

NLC 10.0* 10.0* 11.1* 11.1* 8.4 10.8* 5.7 8.4* 5.1 5.8*

9.4

LC 10.0* 10.0* 11.1* 11.1* 9.0 10.8* 6.2 8.4* 5.6 5.8*

6.0

NLC 15.8* 15.8* 14.1* 14.1* 11.4 13.3* 8.4 11.1* 5.9 9.4 4.4 5.5*

10.1

LC 15.8* 15.8* 14.1* 14.1* 12.1 13.3* 8.9 11.1* 6.4 9.4* 4.8 5.5*

4.5

NLC 24.0* 24.0* 16.3 19.6* 11.1 14.3* 8.2 11.4* 5.9 9.3 4.1 6.5* 4.0 5.5*

10.6

LC 24.0* 24.0* 17.3 19.6* 11.7 14.3* 8.7 11.4* 6.3 9.3 4.4 6.5* 4.4 5.5*

3.0

NLC 21.0* 21.0* 15.8 19.2* 10.9 14.7* 7.9 11.5* 5.7 9.2 4.0 7.0 3.7 5.5*

10.8

LC 21.0* 21.0* 16.9 19.2* 11.5 14.7* 8.5 11.5* 6.2 9.2 4.4 7.0 4.1 5.5*

1.5

NLC 11.2* 11.2* 15.1 19.7* 10.2 14.5* 7.4 11.3* 5.5 9.2 3.9 6.9 3.7 5.7*

10.8

LC 11.2* 11.2* 16.6 19.7* 11.1 14.5* 8.0 11.3* 6.0 9.2 4.3 7.0 4.0 5.7*

NLC 15.4* 15.4* 14.0 20.1* 9.5 14.5* 7.0 11.4* 5.2 9.0 3.8 6.4* 3.7 5.6*

10.6

LC 15.4* 15.4* 15.5 20.1* 10.4 14.5* 7.6 11.4* 5.7 9.0 4.2 6.4* 4.1 5.6*

– 1.5

NLC 21.5* 21.5* 13.4 20.4* 9.0 14.8* 6.7 11.6* 4.9 8.7 4.0 4.6*

10.2

LC 21.5* 21.5* 14.9 20.4* 9.9 14.8* 7.3 11.6* 5.4 8.7 4.4 4.6*

– 3.0

NLC 25.6 29.1* 13.3 20.2* 8.9 14.8* 6.4 11.1* 4.8 6.5* 3.4* 3.4*

9.5

LC 29.1* 29.1* 14.7 20.2* 9.7 14.8* 7.1 11.1* 5.3 6.5* 3.4* 3.4*

– 4.5

NLC 26.2 27.1* 13.5 18.3* 8.9 12.8* 6.3 7.2* 4.3* 4.3*

8.1

LC 27.1* 27.1* 14.9 18.3* 9.7 12.8* 7.0 7.2* 4.3* 4.3*

– 6.0

NLC 18.3* 18.3* 10.4* 10.4* 8.4* 8.4*

5.0

LC 18.3* 18.3* 10.4* 10.4* 8.4* 8.4*

NLC 8.9* 8.9* 6.4* 6.4*

5.6

LC 8.9* 8.9* 6.4* 6.4*

10.5

NLC 8.3* 8.3* 6.3* 6.3* 5.1* 5.1*

7.8

LC 8.3* 8.3* 6.3* 6.3* 5.1* 5.1*

9.0

NLC 8.2* 8.2* 8.0* 8.0* 5.5* 5.5* 4.5* 4.5*

9.2

LC 8.2* 8.2* 8.0* 8.0* 5.5* 5.5* 4.5* 4.5*

7.5

NLC 8.4* 8.4* 8.3 8.5* 6.0 7.7* 4.3* 4.3*

10.2

LC 8.4* 8.4* 8.5* 8.5* 6.5 7.7* 4.3* 4.3*

6.0

NLC 9.1* 9.1* 9.9* 9.9* 8.3 9.6* 6.1 8.9* 4.3 6.1* 3.9 4.1*

10.9

LC 9.1* 9.1* 9.9* 9.9* 8.8 9.6* 6.6 8.9* 4.6 6.1* 4.1* 4.1*

4.5

NLC 27.7* 27.7* 16.5 18.5* 11.1 13.7* 8.2 11.0* 6.1 9.2* 4.3 7.2 3.5 4.1*

11.3

LC 27.7* 27.7* 17.6 18.5* 11.8 13.7* 8.7 11.0* 6.5 9.2* 4.7 7.2 3.9 4.1*

3.0

NLC 23.7* 23.7* 15.8 19.8* 10.8 14.4* 8.0 11.3* 5.9 9.0 4.2 7.1 3.3 4.2*

11.5

LC 23.7* 23.7* 16.9 19.8* 11.4 14.4* 8.5 11.3* 6.4 9.1 4.6 7.2 3.7 4.2*

1.5

NLC 19.0* 19.0* 15.6 19.5* 10.5 14.4* 7.6 11.2* 5.6 9.0 4.0 7.0 3.2 4.3*

11.5

LC 19.0* 19.0* 16.6 19.5* 11.3 14.4* 8.2 11.2* 6.1 9.0 4.4 7.0 3.6 4.3*

NLC 17.1* 17.1* 14.4 19.8* 9.7 14.3* 7.1 11.1* 5.3 9.0 3.8 6.8 3.3 4.6*

11.4

LC 17.1* 17.1* 15.9 19.8* 10.6 14.3* 7.7 11.1* 5.8 9.0 4.2 6.9 3.6 4.6*

– 1.5

NLC 20.2* 20.2* 13.6 20.0* 9.1 14.4* 6.7 11.2* 5.0 8.8 3.7 6.4* 3.4 4.6*

11.0

LC 20.2* 20.2* 15.0 20.0* 10.0 14.4* 7.3 11.2* 5.5 8.8 4.1 6.4* 3.8 4.6*

– 3.0

NLC 25.1* 25.1* 13.2 20.3* 8.8 14.7* 6.5 11.5* 4.7 8.4* 3.5* 3.5*

10.3

LC 25.1* 25.1* 14.6 20.3* 9.6 14.7* 7.1 11.5* 5.2 8.4* 3.5* 3.5*

– 4.5

NLC 25.6 29.5* 13.1 19.5* 8.7 14.2* 6.2 9.9* 4.7* 4.7* 3.4* 3.4*

9.2

LC 29.1 29.5* 14.6 19.5* 9.6 14.2* 6.8 9.9* 4.7* 4.7* 3.4* 3.4*

– 6.0

NLC 24.4* 24.4* 13.5 15.8* 8.7 9.5* 4.9* 4.9*

7.2

LC 24.4* 24.4* 14.9 15.8* 9.5* 9.5* 4.9* 4.9*

NLC

LC

10.5

NLC 12.9* 12.9* 8.8* 8.8* 8.8* 8.8*

6.0

LC 12.9* 12.9* 8.8* 8.8* 8.8* 8.8*

9.0

NLC 11.9* 11.9* 11.7 12.2* 7.8 9.6* 7.2 7.4*

7.8

LC 11.9* 11.9* 12.2* 12.2* 8.4 9.6* 7.4* 7.4*

7.5

NLC 12.3* 12.3* 11.6 12.8* 8.2 11.2* 5.6 6.8*

8.9

LC 12.3* 12.3* 12.4 12.8* 8.8 11.2* 6.1 6.8*

6.0

NLC 26.7* 26.7* 16.9 18.4* 11.3 13.9* 8.3 11.3* 5.7 9.4 4.7 6.5*

9.7

LC 26.7* 26.7* 18.0 18.4* 12.0 13.9* 8.9 11.3* 6.2 9.4 5.2 6.5*

4.5

NLC 22.9* 22.9* 16.2 19.8* 11.1 14.6* 8.2 11.5* 5.7 9.3 4.2 6.4*

10.2

LC 22.9* 22.9* 17.2 19.8* 11.7 14.6* 8.8 11.5* 6.2 9.3 4.7 6.4*

3.0

NLC 15.9 19.2* 10.9 14.7* 7.8 11.5* 5.6 9.2 4.0 6.5*

10.4

LC 16.9 19.2* 11.6 14.7* 8.4 11.5* 6.1 9.2 4.4 6.5*

1.5

NLC 14.8 19.9* 10.1 14.6* 7.3 11.4* 5.3 9.1 3.9 6.7*

10.5

LC 16.3 19.9* 11.0 14.6* 8.0 11.4* 5.8 9.2 4.3 6.7*

NLC 15.0* 15.0* 13.9 20.3* 9.4 14.7* 7.0 11.5* 5.1 8.9 4.0 5.8*

10.3

LC 15.0* 15.0* 15.3 20.3* 10.3 14.7* 7.6 11.5* 5.6 8.9 4.4 5.8*

– 1.5

NLC 22.9* 22.9* 13.4 20.6* 9.0 15.0* 6.7 11.8* 4.9 8.4* 4.3 4.7*

9.8

LC 22.9* 22.9* 14.9 20.6* 9.9 15.0* 7.3 11.8* 5.4 8.4* 4.7* 4.7*

– 3.0

NLC 25.9 29.7* 13.4 20.0* 8.9 14.7* 6.4 10.4* 4.0* 4.0* 3.7* 3.7*

9.0

LC 29.5 29.7* 14.8 20.0* 9.8 14.7* 7.0 10.4* 4.0* 4.0* 3.7* 3.7*

– 4.5

NLC 25.6* 25.6* 13.7 17.5* 8.9 11.2* 4.9* 4.9*

7.5

LC 25.6* 25.6* 15.1 17.5* 9.8 11.2* 4.9* 4.9*

– 6.0

NLC

LC

Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

The load values are quoted in tons (t) at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 600 mm wide track pads with adjusting cylinder in optimal position. Indicated loads are based on ISO 10567 standard and do not exceed

75 % of tipping or 87 % of hydraulic capacity (indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 625 kg. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.

According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories.

26 R 946 Litronic with Mono Boom 6.45 m and Counterweight 9.0 t

Stick 2.10 m

NLC

LC

10.5

NLC

LC

9.0

NLC

LC

7.5

NLC 11.1* 11.1* 9.4 9.5*

6.7

LC 11.1* 11.1* 9.5* 9.5*

6.0

NLC 11.0 11.6* 7.8 10.6* 7.4 9.0*

7.7

LC 11.6* 11.6* 8.4 10.6* 8.0 9.0*

4.5

NLC 15.5 17.4* 10.4 13.0* 7.6 11.0* 6.4 8.9*

8.3

LC 16.9 17.4* 11.3 13.0* 8.2 11.0* 7.0 8.9*

3.0

NLC 9.8 14.4* 7.3 11.7* 6.0 9.2*

8.6

LC 10.6 14.4* 7.9 11.7* 6.5 9.2*

1.5

NLC 9.3 15.4* 7.0 11.9 5.8 9.7

8.6

LC 10.2 15.4* 7.6 11.9 6.3 9.7

NLC 13.7 14.9* 9.1 15.5* 6.9 11.7 6.0 10.0

8.4

LC 14.9* 14.9* 10.0 15.5* 7.5 11.7 6.5 10.1

– 1.5

NLC 13.8 18.6* 9.1 14.7* 6.9 11.4* 6.5 10.6*

7.9

LC 15.2 18.6* 10.0 14.7* 7.5 11.4* 7.1 10.6*

– 3.0

NLC 18.4* 18.4* 14.1 16.0* 9.4 12.7* 7.8 10.3*

6.9

LC 18.4* 18.4* 15.5 16.0* 10.2 12.7* 8.5 10.3*

– 4.5

NLC 11.1* 11.1* 8.8* 8.8*

5.4

LC 11.1* 11.1* 8.8* 8.8*

– 6.0

NLC

NLC

LC

10.5

NLC

LC

9.0

NLC 7.2* 7.2*

6.2

LC 7.2* 7.2*

7.5

NLC 7.7* 7.7* 6.5* 6.5*

7.6

LC 7.7* 7.7* 6.5* 6.5*

6.0

NLC 7.9 9.5* 6.2* 6.2*

8.5

LC 8.5 9.5* 6.2* 6.2*

4.5

NLC 15.2* 15.2* 10.6 11.8* 7.6 10.2* 5.7 7.3* 5.6 6.1*

9.1

LC 15.2* 15.2* 11.5 11.8* 8.2 10.2* 6.2 7.3* 6.1 6.1*

3.0

NLC 14.7 18.9* 9.9 13.5* 7.3 11.0* 5.6 9.2 5.2 6.3*

9.4

LC 16.1 18.9* 10.8 13.5* 7.9 11.0* 6.0 9.3 5.7 6.3*

1.5

NLC 13.7 15.9* 9.4 14.8* 7.0 11.7* 5.4 9.1 5.1 6.6*

9.4

LC 15.1 15.9* 10.2 14.8* 7.6 11.7* 5.9 9.1 5.5 6.6*

NLC 13.5 18.7* 9.1 15.4* 6.8 11.6 5.3 9.0 5.2 7.3*

9.2

LC 14.9 18.7* 9.9 15.4* 7.4 11.6 5.8 9.0 5.6 7.3*

– 1.5

NLC 13.3* 13.3* 13.5 20.0* 9.0 15.1* 6.7 11.5 5.6 8.4*

8.7

LC 13.3* 13.3* 14.9 20.0* 9.8 15.1* 7.3 11.6 6.1 8.4*

– 3.0

NLC 22.5* 22.5* 13.7 17.9* 9.1 13.8* 6.8 10.5* 6.4 9.6*

7.9

LC 22.5* 22.5* 15.1 17.9* 9.9 13.8* 7.4 10.5* 7.0 9.6*

– 4.5

NLC 18.0* 18.0* 14.1 14.2* 9.4 10.7* 8.4 9.1*

6.6

LC 18.0* 18.0* 14.2* 14.2* 10.3 10.7* 9.1* 9.1*

– 6.0

NLC

NLC

LC

10.5

NLC

LC

9.0

NLC 6.1* 6.1*

6.8

LC 6.1* 6.1*

7.5

NLC 8.1 8.7* 5.5* 5.5*

8.1

LC 8.7 8.7* 5.5* 5.5*

6.0

NLC 8.0 9.0* 5.3* 5.3*

8.9

LC 8.6 9.0* 5.3* 5.3*

4.5

NLC 10.8 11.2* 7.7 9.7* 5.7 8.9* 5.2* 5.2*

9.5

LC 11.2* 11.2* 8.3 9.7* 6.2 8.9* 5.2* 5.2*

3.0

NLC 15.0 17.8* 10.0 12.9* 7.3 10.6* 5.6 9.3 4.9 5.4*

9.7

LC 16.4 17.8* 10.9 12.9* 7.9 10.6* 6.0 9.3 5.3 5.4*

1.5

NLC 13.9 19.8* 9.4 14.4* 7.0 11.4* 5.4 9.1 4.8 5.6*

9.8

LC 15.3 19.8* 10.3 14.4* 7.6 11.4* 5.9 9.1 5.2 5.6*

NLC 13.4 19.7* 9.0 15.2* 6.7 11.6 5.3 8.9 4.9 6.2*

9.6

LC 14.8 19.7* 9.9 15.2* 7.3 11.6 5.7 8.9 5.3 6.2*

– 1.5

NLC 12.8* 12.8* 13.3 20.4* 8.9 15.2* 6.6 11.4 5.2 8.5* 5.2 7.0*

9.1

LC 12.8* 12.8* 14.7 20.4* 9.7 15.2* 7.2 11.5 5.7 8.5* 5.6 7.0*

– 3.0

NLC 20.4* 20.4* 13.5 18.6* 8.9 14.2* 6.7 11.0* 5.9 8.6*

8.3

LC 20.4* 20.4* 14.9 18.6* 9.8 14.2* 7.3 11.0* 6.4 8.6*

– 4.5

NLC 20.3* 20.3* 13.9 15.4* 9.2 11.7* 7.4 9.0*

7.1

LC 20.3* 20.3* 15.3 15.4* 10.0 11.7* 8.1 9.0*

– 6.0

NLC

NLC

LC

10.5

NLC

LC

9.0

NLC

LC

7.5

NLC 7.5* 7.5*

7.3

LC 7.5* 7.5*

6.0

NLC 10.9* 10.9* 7.9 10.0* 6.8 7.1*

8.2

LC 10.9* 10.9* 8.5 10.0* 7.1* 7.1*

4.5

NLC 16.0 16.0* 10.6 12.3* 7.6 10.5* 5.9 7.1*

8.8

LC 16.0* 16.0* 11.4 12.3* 8.2 10.5* 6.4 7.1*

3.0

NLC 14.4 19.7* 9.9 13.9* 7.3 11.3* 5.6 8.8* 5.5 7.2*

9.1

LC 15.8 19.7* 10.8 13.9* 7.9 11.3* 6.1 8.8* 6.0 7.2*

1.5

NLC 12.8* 12.8* 9.4 15.1* 7.0 11.9 5.5 9.1 5.4 7.7*

9.1

LC 12.8* 12.8* 10.2 15.1* 7.6 11.9 5.9 9.2 5.8 7.7*

NLC 13.5 17.9* 9.1 15.5* 6.8 11.7 5.5 8.5*

8.9

LC 14.9 17.9* 9.9 15.5* 7.4 11.7 6.0 8.5*

– 1.5

NLC 13.5* 13.5* 13.6 19.5* 9.0 15.0* 6.8 11.6 6.0 9.9*

8.4

LC 13.5* 13.5* 15.0 19.5* 9.9 15.0* 7.4 11.6 6.5 9.9*

– 3.0

NLC 21.6* 21.6* 13.8 17.2* 9.2 13.4* 7.0 10.0* 6.9 9.9*

7.5

LC 21.6* 21.6* 15.2 17.2* 10.0 13.4* 7.6 10.0* 7.5 9.9*

– 4.5

NLC 13.2* 13.2* 9.6 9.7* 9.1* 9.1*

6.2

LC 13.2* 13.2* 9.7* 9.7* 9.1* 9.1*

– 6.0

NLC

LC

Height Can be slewed though 360° In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity

The load values are quoted in tons (t) at stick end (without bucket), and may be swung 360° on firm and even ground. Adjacent values are valid for the undercarriage when in the longitudinal position. Capacities are valid for 600 mm wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity

(indicated via *). Without bucket cylinder, link and lever the lift capacities will increase by 625 kg. Lifting capacity of the excavator is limited by machine stability and hydraulic capacity.

According to European Standard, EN 474-5: In the European Union excavators have to be equipped with an overload warning device, a load diagram and automatic safety check valves on hoist cylinders and stick cylinder(s), when they are used for lifting operations which require the use of lifting accessories.

R 946 Litronic 27 with Straight Mono Boom 6.80 m and Counterweight 9.0 t

NLC

LC

10.5

NLC

LC

9.0

NLC 11.3 12.3* 8.7* 8.7*

6.5

LC 12.2 12.3* 8.7* 8.7*

7.5

NLC 11.3 12.1* 7.8 10.9* 7.2 7.7*

7.9

LC 12.1* 12.1* 8.4 10.9* 7.7* 7.7*

6.0

NLC 15.9* 15.9* 10.9 12.8* 7.7 11.0* 6.0 7.2*

8.7

LC 15.9* 15.9* 11.7 12.8* 8.3 11.0* 6.5 7.2*

4.5

NLC 15.2 18.9* 10.2 13.9* 7.4 11.4* 5.6 9.3 5.3 7.1*

9.3

LC 16.7 18.9* 11.1 13.9* 8.0 11.4* 6.1 9.3 5.8 7.1*

3.0

NLC 9.5 15.0* 7.1 11.9* 5.5 9.1 5.0 7.1*

9.5

LC 10.4 15.0* 7.7 11.9* 5.9 9.2 5.5 7.1*

1.5

NLC 9.1 15.4* 6.8 11.7 5.4 9.0 4.9 7.4*

9.6

LC 9.9 15.4* 7.4 11.7 5.8 9.0 5.4 7.4*

NLC 9.8* 9.8* 8.9 14.9* 6.6 11.5 5.3 8.9 5.1 7.9*

9.4

LC 9.8* 9.8* 9.7 14.9* 7.2 11.5 5.7 8.9 5.5 7.9*

– 1.5

NLC 13.4 16.0* 8.9 13.4* 6.6 10.7* 5.5 8.0*

8.9

LC 14.8 16.0* 9.7 13.4* 7.2 10.7* 5.9 8.0*

– 3.0

NLC 12.8* 12.8* 9.1 11.0* 6.8 8.4* 6.3 6.9*

8.1

LC 12.8* 12.8* 9.9 11.0* 7.4 8.4* 6.8 6.9*

– 4.5

NLC

LC

– 6.0

NLC

NLC

LC

10.5

NLC 7.7* 7.7*

5.6

LC 7.7* 7.7*

9.0

NLC 10.5* 10.5* 6.3* 6.3*

7.5

LC 10.5* 10.5* 6.3* 6.3*

7.5

NLC 10.6* 10.6* 8.0 10.0* 5.6* 5.6*

8.7

LC 10.6* 10.6* 8.6 10.0* 5.6* 5.6*

6.0

NLC 11.0 11.8* 7.8 10.3* 5.8 8.9* 5.2 5.3*

9.5

LC 11.8* 11.8* 8.4 10.3* 6.2 8.9* 5.3* 5.3*

4.5

NLC 15.9 17.2* 10.4 13.1* 7.5 10.8* 5.6 9.3 4.7 5.2*

10.0

LC 17.2* 17.2* 11.3 13.1* 8.1 10.8* 6.1 9.3 5.1 5.2*

3.0

NLC 14.3 19.2* 9.7 14.4* 7.1 11.5* 5.4 9.1 4.5 5.3*

10.2

LC 15.7 19.2* 10.5 14.4* 7.7 11.5* 5.9 9.1 4.8 5.3*

1.5

NLC 10.2* 10.2* 9.1 15.2* 6.8 11.6 5.3 8.9 4.4 5.5*

10.3

LC 10.2* 10.2* 9.9 15.2* 7.4 11.6 5.7 8.9 4.8 5.5*

NLC 12.5* 12.5* 8.8 15.1* 6.5 11.4 5.1 8.8 4.5 5.8*

10.0

LC 12.5* 12.5* 9.6 15.1* 7.1 11.4 5.6 8.8 4.9 5.8*

– 1.5

NLC 8.7* 8.7* 13.1 17.9* 8.7 14.1* 6.5 11.1* 5.1 8.7* 4.8 6.4*

9.6

LC 8.7* 8.7* 14.5 17.9* 9.5 14.1* 7.1 11.1* 5.6 8.7* 5.2 6.4*

– 3.0

NLC 16.0* 16.0* 13.4 15.0* 8.8 12.2* 6.5 9.6* 5.4 6.7*

8.9

LC 16.0* 16.0* 14.7 15.0* 9.6 12.2* 7.1 9.6* 5.8…