W912ES-16-T-0113_Pool_10_Willow_Island_Planting_Solicitation.pdf

W81G6762002852

Pool 10, Willow Island, vicinity Guttenburg, Iow a. Work under this contract includes control of w oody and herbaceous invasives, supplying and applying herbicide for site prep in open prairie pockets, root dipping, supplying and planting 760 bare root tree seedlings, supplying and planting 56 Root Production Method (RPM) trees, supplying and installing 816 Plantra tree tubes, and supplying and applying deer repellant tablets. The estimated price range is less than $25,000. The North American Industry Classification System (NAICS) Code is 115310 w ith a small business standard of $7.5 million. This solicitation is issued as a Total Small Business Set-Aside.

VIRGINIA M REGORRAH 701-772-8292

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

11-Aug-2016

(RFP)

(IFB)

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

X

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________ calendar days after receiving aw ard, notice to proceed. This performance period is X mandatory, negotiable. (See _________________________52.211-10

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

YES X NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specified in Item 8 by ___________ local time ______________18 Aug 2016 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is, X is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______30 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

CONTRACTING DIVISION

USACE - ST. PAUL

180 5TH STREET E SUITE 700

ST. PAUL MN 55101-1678

W912ES

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

02:00 PM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

FAX:TEL: TEL: FAX:

W912ES-16-T-0113 28

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

W912ES-16-T-0113

Table of Contents

TABLE OF CONTENTS

NOTES TO OFFERORS

STATEMENT OF WORK

PRICING SCHEDULE

SECTION 00010 ‐ SOLICITATION CONTRACT FORM

CLAUSES INCORPORATED BY REFERENCE

52.204‐7 SYSTEM FOR AWARD MANAGEMENT JUL 2013

52.204‐13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE JUL 2013

52.204‐16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING JUL 2016

52.204‐18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE JUL 2016

52.204‐19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS DEC 2014

52.215‐1 INSTRUCTIONS TO OFFERORS‐‐COMPETITIVE ACQUISITION JAN 2004

52.222‐5 CONSTRUCTION WAGE RATE REQUIREMENTS‐‐SECONDARY SITE OF THE WORK MAY 2014 52.225‐10 ALT I NOTICE OF BUY AMERICAN REQUIREMENT‐‐CONSTRUCTION MATERIALS (FEB 2009) ALTERNATE I MAY 2014 .. 16

CLAUSES INCORPORATED BY FULL TEXT

52.214‐4002 ALL OR NONE QUALIFICATIONS (FEB 2011) FAR 14.404‐5

52.252‐1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

SECTION 00600 ‐ REPRESENTATIONS & CERTIFICATIONS

CLAUSES INCORPORATED BY REFERENCE

52.204‐16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING JUL 2016

52.209‐10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS NOV 2015 252.203‐7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS NOV 2011

CLAUSES INCORPORATED BY FULL TEXT

52.204‐8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (APR 2016)

52.209‐2 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS‐‐REPRESENTATION (NOV 2015)

SECTION 00700 ‐ CONTRACT CLAUSES

CLAUSES INCORPORATED BY REFERENCE

52.204‐19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS DEC 2014 52.209‐10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS NOV 2015

52.219‐6 NOTICE OF TOTAL SMALL BUSINESS SET‐ASIDE NOV 2011

52.222‐3 CONVICT LABOR JUN 2003

52.222‐6 CONSTRUCTION WAGE RATE REQUIREMENTS MAY 2014

52.222‐7 WITHHOLDING OF FUNDS MAY 2014

52.222‐8 PAYROLLS AND BASIC RECORDS MAY 2014

52.222‐9 APPRENTICES AND TRAINEES JUL 2005

52.222‐10 COMPLIANCE WITH COPELAND ACT REQUIREMENTS FEB 1988

52.222‐11 SUBCONTRACTS (LABOR STANDARDS) MAY 2014

52.222‐12 CONTRACT TERMINATION‐DEBARMENT MAY 2014

52.222‐13 COMPLIANCE WITH CONSTRUCTION WAGE RATE REQUIREMENTS AND RELATED REGULATIONS MAY 2014

52.222‐14 DISPUTES CONCERNING LABOR STANDARDS FEB 1988

52.222‐15 CERTIFICATION OF ELIGIBILITY MAY 2014

52.222‐21 PROHIBITION OF SEGREGATED FACILITIES APR 2015

52.222‐26 EQUAL OPPORTUNITY APR 2015

52.222‐50 COMBATING TRAFFICKING IN PERSONS MAR 2015

52.223‐2 AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER SERVICE AND CONSTRUCTION CONTRACTS SEP 2013

52.223‐6 DRUG‐FREE WORKPLACE MAY 2001

52.223‐17 AFFIRMATIVE PROCUREMENT OF EPA‐DESIGNATED ITEMS IN SERVICE AND CONSTRUCTION CONTRACTS MAY 2008 ... 21 52.223‐18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING AUG 2011

52.225‐9 BUY AMERICAN‐‐CONSTRUCTION MATERIALS MAY 2014

52.225‐13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES JUN 2008

52.232‐5 PAYMENTS UNDER FIXED‐PRICE CONSTRUCTION CONTRACTS MAY 2014

52.232‐23 ASSIGNMENT OF CLAIMS MAY 2014

52.232‐27 PROMPT PAYMENT FOR CONSTRUCTION CONTRACTS MAY 2014

52.232‐33 PAYMENT BY ELECTRONIC FUNDS TRANSFER‐‐SYSTEM FOR AWARD MANAGEMENT JUL 2013

52.232‐39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS JUN 2013

52.232‐40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS DEC 2013

52.233‐1 DISPUTES MAY 2014

52.233‐3 PROTEST AFTER AWARD AUG 1996

52.233‐4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM OCT 2004

52.236‐5 MATERIAL AND WORKMANSHIP APR 1984

52.236‐7 PERMITS AND RESPONSIBILITIES NOV 1991

52.236‐17 LAYOUT OF WORK APR 1984

52.236‐26 PRECONSTRUCTION CONFERENCE FEB 1995

52.242‐14 SUSPENSION OF WORK APR 1984

52.243‐5 CHANGES AND CHANGED CONDITIONS APR 1984

52.244‐6 SUBCONTRACTS FOR COMMERCIAL ITEMS JUN 2016

52.249‐1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (SHORT FORM) APR 1984

52.252‐6 AUTHORIZED DEVIATIONS IN CLAUSES APR 1984

52.253‐1 COMPUTER GENERATED FORMS JAN 1991

252.201‐7000 CONTRACTING OFFICER'S REPRESENTATIVE DEC 1991

252.203‐7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS SEP 2011

252.203‐7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS SEP 2013

252.204‐7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT APR 1992

252.204‐7004 ALT A SYSTEM FOR AWARD MANAGEMENT ALTERNATE A FEB 2014

252.204‐7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING. DEC 2015 252.204‐7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT MAY 2016

252.223‐7008 PROHIBITION OF HEXAVALENT CHROMIUM JUN 2013

252.225‐7008 RESTRICTION ON ACQUISITION OF SPECIALTY METALS MAR 2013

252.225‐7048 EXPORT‐CONTROLLED ITEMS JUN 2013

252.232‐7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS JUN 2012

252.232‐7010 LEVIES ON CONTRACT PAYMENTS DEC 2006

252.236‐7000 MODIFICATION PROPOSALS‐PRICE BREAKDOWN DEC 1991

252.236‐7001 CONTRACT DRAWINGS, AND SPECIFICATIONS AUG 2000

252.243‐7001 PRICING OF CONTRACT MODIFICATIONS DEC 1991

252.244‐7000 SUBCONTRACTS FOR COMMERCIAL ITEMS JUN 2013

252.247‐7023 TRANSPORTATION OF SUPPLIES BY SEA APR 2014

252.247‐7024 NOTIFICATION OF TRANSPORTATION OF SUPPLIES BY SEA MAR 2000

CLAUSES INCORPORATED BY FULL TEXT

52.211‐10 COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK (APR 1984) ‐ ALTERNATE I (APR 1984)

SECTION 00800 ‐ SPECIAL CONTRACT REQUIREMENTS

WAGE RATES

CLAUSES INCORPORATED BY FULL TEXT

52.232‐4004 INVOICE PROCEDURES

Notes to Offerors

1. PLEASE SUBMIT THE FOLLOWING WITH YOUR QUOTATION:

Complete Standard Form (SF) 1442 with acknowledgement of Amendments and completed pricing schedule.

Quotations will be evaluated in accordance with Federal Acquisition Regulations (FAR) Part 13, Simplified Acquisition Procedures. Award will be made to the responsible firm whose quotation represents the lowest price.

Quotations are due no later than the date and time indicated in Block 13 of the Standard Form (SF) 1442.

In accordance with Federal Acquisition Regulation (FAR) Subpart 9.1, a prospective contractor may be requested to provide additional information in order to assist the Government in making a responsibility determination.

2. Quotes may be submitted by email (preferred) directly to Virginia Regorrah at virginia.m.regorrah@usace.army.mil or faxed to her attention at 651‐290‐5706

3. Questions concerning this solicitation should be directed to Virginia Regorrah, Procurement Analyst, by email at virginia.m.regorrah@usace.army.mil. Questions must be received not later than 2 days prior to receipt of quotes. Questions received after the deadline may not be answered prior to closing.

4. A prospective contractor must be registered in SAM (System For Award Management), including online representations and certifications. Please see www.sam.gov for registration information.

5. A vendor must provide a price on all items in this solicitation to be eligible for award. The Government will award on an “All or None” basis.

6. A determination by the government to not award based on the responses to this solicitation is solely within the discretion of the government.

7. As a department in the United States of America federal government, the United States Army Corps of

Engineers is a tax‐exempt entity. Its tax exempt status ID is 62‐1642142.

STATEMENT OF WORK

1. Background and Scope:

This contract includes control of woody and herbaceous invasives, supplying and applying herbicide for site prep in open prairie pockets, root dipping, supplying and planting 760 bare root tree seedlings, supplying and planting 56 Root Production Method (RPM) trees, supplying and installing 816 Plantra tree tubes, and supplying and applying deer repellant tablets. This statement of work provides a description of forest restoration work to be conducted by contract on Willow Island in Pool 10 of the Upper Mississippi River adjacent to Guttenberg, IA. The purpose of this contract is to control pockets of black locust and to do some supplemental planting to restore Willow Island to an Oak Savanna like condition. Willow Island is an island created from material dredge out of Bussey Lake as part of the Bussey Lake EMP project. The island consists of an out ring on high ground that served as a containment dike and planted with prairie species during the EMP project. It was later planted in groups of Root Production Method (RPM) trees on a 30x30 foot spacing. Willow Island is roughly 0.06 miles east of Guttenberg, IA and is on the Iowa side of the main navigation channel. The total acreage to be restored on Willow Island is 1.12 acres.

The current management prescription is to plant bare root seedlings on an 8x8 foot spacing and to plant RPM trees on a 30x30 foot spacing.

Species and quantities include:

Bare root seedlings (18-24”): (190) Bur Oak, (190) Black Oak, (190) Northern Pin Oak, and

(190) Swamp White Oak

RPM Trees: (28) Swamp White Oak, and (28) Bur Oak

2. Project Site Access:

Access to the planting area is by boat. The Contractor is responsible for providing their own boat(s) and transporting all Contractor personnel, equipment and supplies to and from the planting area for the duration of the contract. A public boat ramp, Bussey Lake Landing, is located off of Highway X56 on Marina Rd on the north side of Guttenberg, IA and is 0.65 miles from the planting site (see map below for directions).

3. Work Schedule:

Black locust trees (2-6” dbh) will be basal bark treated, then after 1 ½ months will be cut down and crown vetch will be controlled with a foliar herbicide. Herbicide work should occur between June 15th and August 31st. In the fall, tree planting can start mid-October and be finished by mid- November, bare root seedlings and RPM (Root Production Method) trees will get planted.

4. Contractor Furnished Materials:

The Contractor will provide all the herbicide and herbicide equipment needed to control crown vetch and black locust and the equipment needed to cut, buck and fell the black locust. The Contractor will provide all bare root seedlings (760) and RPM trees (56). The Contractor will provide mycorrhizal fungi root dip to inoculate the roots of each bare root seedling before planting. The root dip must contain low host specificity endo- and ectomycorrizae fungi. The Contractor will provide the Repellex Deer Repellant tablets for each bare root seedling and RPM tree. The Contractor will provide a Plantra tree tube for every bare root seedling and RPM tree.

5. Herbicide Application:

All black locust stems in the project area (see attached map) shall be treated sometime between June 15th and August 31st with a basal bark application of the appropriate herbicide (e.g. triclopyr) according to label instructions. A minimum of 1 ½ months after herbicide application all dead stems shall be cut close to ground level and no more than 6” above. Any live stems at this point shall be re-applied with basal bark treatment. In addition, foliar applications of clopyralid or another broadleaf specific herbicide labeled for control of crown vetch shall be applied to all crown vetch plants in the project area. Distribution of crown vetch is spotty and total control is desired in this contract. The total acreage to be treated for black locust is approximately 0.25 while crown vetch may occur throughout the entire 1.12 acre project area. The contractor shall avoid applications in locations or using chemicals or formulations that may damage established hardwood seedlings and saplings.

To prep the site for tree planting, the Contractor will spray glyphosate at a rate not to exceed 5% solution in a 3 ft diameter circle at each bare root and RPM planting location, roughly at an 8x8 foot spacing for bare roots and 30x30 foot for RPMs. Herbicide applications for site prep should be implemented between two weeks and one month in advance of the tree planting in September or October.

6. Planting Procedures:

Bare seedling procedure:

The Contractor shall dip the entire root system of each bare root plant in a solution containing mycorrhizal fungal inoculants upon removing the plant from the nursery bag or box. The quantity of seedlings placed in a planting bag or planting machine holder shall be limited to that which allows the removal of individual seedlings without damage to tops or roots. The Contractor shall remove only one seedling at a time from a planting bag or planting machine holder only after the planting hole has been prepared.

The Contractor shall prepare a planting hole that is wide enough to fully suspend the roots of the plant material. The Contractor shall suspend the root system near the center of the planting hole, with roots in a near –natural arrangement, at a depth at which the top of the root system is covered by approximately one inch of top soil after filling, packing and leveling. A “near-natural arrangement” means that roots approximate the position they would have when growing in nature, and are not twisted, tangled, compacted, curled, or bent relative to a position that is perpendicular to the ground surface. Each plant shall be set firmly in the ground, with moist soil filled in and placed firmly around the roots. The Contractor shall level the soil near the plant after planting and firming so there are no depressions or mounds near the stem. The Contractor may prune seedling roots prior to planting, but must leave minimum of 12” of root length measured from the root collar.

RPM procedure:

The Contractor shall prepare a planting hole that is large enough to hold the potted tree. The Contractor shall place the RPM tree so that it is level and the tree is standing straight, then filled with top soil 1” above the root collar after filling, packing and leveling. The contractor shall also pull apart roots in the root ball to reduce the likelihood of continued root spiraling and eventual girdling of the trees.

The Government Inspector may also specify where certain plant species or associations of plant species are to be planted within the project area. Plant material planted in inappropriate places will be subject to rejection by the Government Inspector during inspections.

Inappropriate places include in rock, standing water or other media that prevent planting tools from making an acceptable planting hole. When an inappropriate place is encountered, the Contractor shall plant the plant material in the nearest appropriate location.

The Contracting Officer may suspend planting work if weather conditions could damage plant material, even if the material is handled in accordance with this agreement. The Contracting Officer may also suspend planting work at any time if the Contracting Officer determines that the Contractor is not handling plants or planting in accordance with this agreement.

Excess and waste material shall be removed and properly disposed of off-site. Areas that have been damaged by planting operations shall be restored to original condition at the Contractor’s expense.

7. Applying Deer Repellant Tablets:

The Contractor must apply 1 Repellex deer repellant tablet for every foot of stem of the bare root seedling and RPM tree. EXAMPLE: a 4ft bare root seedling or RPM tree would require 4 Repellex deer repellant tablets. After the Contractor makes the planting hole, the tablets will be placed before the seedling is put into the ground.

8. Storage and Handling of Bare Root Seedlings and RPM Trees:

The Contractor must ensure that plant materials are properly stored and handled up until the time of actual planting. Temporary refrigerated storage must be provided by the Contractor. The Contractor must ensure bare root seedlings are stored at temperatures from 36 to 45 degrees F, or properly healed-in at the planting location up until the day of actual planting.

Contractor shall be responsible for transporting plant material to the project site under covers to protect plant materials from freezing or drying. Plant material shall not be transported in heated crew vehicles.

At the planting locations, the Contractor shall keep plants covered at all times using light colored tarps or insulating blankets and shall protect all plants from loss, destruction or damage of any kind, including physical injury, freezing, heating or drying. Contractor shall be responsible for all loss, destruction or damage to plant material that occurs from the time contractor takes possession of the plants until plants are planted.

9. Quality Control:

This contract requires a Quality Control Inspector provided by the Contractor. It is the duty of the Quality Control Inspector to closely monitor the planting quality of the Contractor crew and notify the foreman and planters of any issues regarding planting quality, so that deficient trends may be remedied before becoming a detriment to the overall unit quality. The Quality Control Inspector shall keep written records of the crew’s planting quality and provide the record to the Contracting Officer as each planting unit (island) is completed.

Quality control is understood to mean taking those measures necessary to ensure that the planting is completed in full accordance with all specifications set forth in this contract. The Contractor will be ultimately responsible for quality control. Quality control will be reviewed during the pre-work meeting. In addition, Government representatives will be available during the first day of planting and will occasionally visit the site during planting. They will also be available for consultation, but they will not serve as daily inspectors. It is the responsibility of the Contractor to provide day-to-day oversight of the planting crews. The Government will conduct an inspection at the completion of the planting to determine the acceptability of the planting.

The Government will inspect the planting to determine compliance with specifications and to provide the basis for computing the rate of payment. Inspection of planting will include visual inspection of 100% of the area and random sampling of planting procedures above and below ground and seedling spacing. Inspection plots will be located throughout the planting area(s) so as to obtain a representative sample of the work. Inspections will consist of observations of seedling handling, planting and inspection procedures, and examination of a sample of individual seedlings.

Planting shall be suspended, if in a planting day, three inspection plots fall below 90 percent and the overall stand percentage is lower than 90 percent. The Contractor, after consultation with the Government Inspector, shall determine the cause for the error and shall convey to the crew methods to prevent future mistakes before continuing work. If after resuming work, two more plots indicate the planting quality of at least 90 percent will be considered non-compliance with the terms of this contract and may be grounds for suspension or termination.

Planting procedures will be observed and planted seedlings from a representative sample will be dug and examined to assure compliance with specifications.

Above Ground Inspection:

(a) Spacing

(b) Planting spot selection

(c) Tree location on spot

(d) Planting depth and exposed roots

(e) Firmness

Below Ground Inspection:

(a) Planting hole orientation

(b) Root configuration and orientation

(c) Altered root length and damage

(d) “Foreign” material in planting hole

(e) Loose soil or air pockets A minimum of twelve 1/250th acre square plots will be randomly chosen (13.2 ft. per side).

Inspect and record the number of planted trees meeting above-ground contract specification.

After determining the number of satisfactory above-ground trees on the plot, a minimum of three planted trees within the plot are dug for below-ground compliance. Trees will be dug starting with the one closest to the plot center and progressing outwards. The number of trees meeting below-ground specifications will be recorded. Planting quality will be computed by the following formula:

Planting = # of sat. trees above-ground # of sat. dug trees Quality _______________________ X _______________ X 100

# of plantable spots # of dug trees

10. Liability of and Damage to the Government:

The Government assumes no liability from the Contractor’s performance of the contract work.

The Contractor shall hold and save the Government harmless from any and all liability to others arising from the performance of the contract.

The Contractor is responsible for all damages to persons and property resulting from performance of the contract work.

11. Safety Manual:

The Contractor must comply with all safety and health requirements as outlined in the U.S. Army Corps of Engineers Safety and Health Requirements Manuel, EM 385-1-1 dated September 2008, to insure safe working conditions for contractor employees and government visitors to the site. If the Contractor does not have a copy of this manual, one will be provided or can be downloaded from http://www.publications.usace.army.mil/Portals/76/Publications/EngineerManuals/EM_385‐1‐1.pdf

12. Pre-Work Meeting:

After a notice to proceed has been issued by the Contracting Officer, the Contractor will contact the Government Inspector and arrange a pre-work meeting before actual work begins.

13. Government point of Contact(s) and Government Inspector(s):

Eric Hanson, Ecologist/Biologist, ofc 651-290-5386 cell 320-248-8776 Dan Reburn, Natural Resource Specialist, ofc 651-290-5900 cell 651-262-8649

Attachment 1: Black locust control area (0.25 acres).

Attachment 2: Willow Island project planting area (1.12 acres).

Attachment 3: Vicinity map of Willow Island.

Pricing Schedule

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Herbicide Application 1 Job $_______________ $_______________

0002 Plant bare root seedlings

1 Job $______________ $______________

0003 Plant trees 1 Job $_______________ $______________

NET AMT $_________________

Section 00010 ‐ Solicitation Contract Form

CLAUSES INCORPORATED BY REFERENCE

52.204‐7 System for Award Management JUL 2013 52.204‐13 System for Award Management Maintenance JUL 2013 52.204‐16 Commercial and Government Entity Code Reporting JUL 2016 52.204‐18 Commercial and Government Entity Code Maintenance JUL 2016 52.204‐19 Incorporation by Reference of Representations and Certifications. DEC 2014 52.215‐1 Instructions to Offerors‐‐Competitive Acquisition JAN 2004 52.222‐5 Construction Wage Rate Requirements‐‐Secondary Site of the Work MAY 2014 52.225‐10 Alt I Notice of Buy American Requirement‐‐Construction Materials (Feb 2009)

Alternate I

MAY 2014

CLAUSES INCORPORATED BY FULL TEXT

52.214‐4002 ALL OR NONE QUALIFICATIONS (FEB 2011) FAR 14.404‐5

A vendor must provide a price on all items in this solicitation to be eligible for award. The Government will award on an “All or None” basis. Evaluation of bids/offers will be based upon only the total price included on the pricing schedule for all items. If options are included in the pricing schedule the evaluation will be conducted in accordance with the applicable option clause in the solicitation.

52.252‐1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

www.acquisition.gov

(End of provision)

Section 00600 ‐ Representations & Certifications

52.204‐16 Commercial and Government Entity Code Reporting JUL 2016

52.209‐10 Prohibition on Contracting With Inverted Domestic Corporations NOV 2015

252.203‐7005 Representation Relating to Compensation of Former DoD Officials NOV 2011

52.204‐8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (APR 2016)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 115310.

(2) The small business size standard is $7.5 million.

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

( ) Paragraph (d) applies.

( ) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(iv) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(v) 52.209-2; Prohibition on Contracting with Inverted Domestic Corporations--Representation.

(vi) 52.209-5; Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(vii) 52.209-11, Representation by Corporations Regarding elinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(viii) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(ix) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(x) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(xi) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xiii) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xiv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xv) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA-designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xvi) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items.

(xvii) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xviii) 52.225-4, Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225- 3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $77,533, the provision with its Alternate II applies.

(D) If the acquisition value is $77,533 or more but is less than $100,000, the provision with its Alternate III applies.

(xix) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xx) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations.

(xxi) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certification. This provision applies to all solicitations.

(xxii) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

(i) 52.204-17, Ownership or Control of Offeror.

(ii) 52.204-20, Predecessor of Offeror.

(iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.

(v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification.

(vi) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA- Designated Products (Alternate I only).

(vii) 52.227-6, Royalty Information.

(A) Basic.

(B) Alternate I.

(viii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

52.209‐2 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS‐‐

REPRESENTATION (NOV 2015)

(a) Definitions. Inverted domestic corporation and subsidiary have the meaning given in the clause of this contract entitled Prohibition on Contracting with Inverted Domestic Corporations (52.209-10).

(b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.

(c) Representation. The Offeror represents that--

(1) It [ ___ ] is, [ ___ ] is not an inverted domestic corporation; and

(2) It [ ___ ] is, [ ___ ] is not a subsidiary of an inverted domestic corporation.

Section 00700 ‐ Contract Clauses

52.204‐19 Incorporation by Reference of Representations and Certifications. DEC 2014

52.209‐10 Prohibition on Contracting With Inverted Domestic Corporations NOV 2015

52.219‐6 Notice Of Total Small Business Set‐Aside NOV 2011

52.222‐3 Convict Labor JUN 2003

52.222‐6 Construction Wage Rate Requirements MAY 2014

52.222‐7 Withholding of Funds MAY 2014

52.222‐8 Payrolls and Basic Records MAY 2014

52.222‐9 Apprentices and Trainees JUL 2005

52.222‐10 Compliance with Copeland Act Requirements FEB 1988

52.222‐11 Subcontracts (Labor Standards) MAY 2014

52.222‐12 Contract Termination‐Debarment MAY 2014

52.222‐13 Compliance With Construction Wage Rate Requirements and Related Regulations

MAY 2014

52.222‐14 Disputes Concerning Labor Standards FEB 1988

52.222‐15 Certification of Eligibility MAY 2014

52.222‐21 Prohibition Of Segregated Facilities APR 2015

52.222‐26 Equal Opportunity APR 2015

52.222‐50 Combating Trafficking in Persons MAR 2015

52.223‐2 Affirmative Procurement of Biobased Products Under Service and Construction Contracts

SEP 2013

52.223‐6 Drug‐Free Workplace MAY 2001

52.223‐17 Affirmative Procurement of EPA‐Designated Items in Service and Construction Contracts

MAY 2008

52.223‐18 Encouraging Contractor Policies To Ban Text Messaging While Driving AUG 2011

52.225‐9 Buy American‐‐Construction Materials MAY 2014

52.225‐13 Restrictions on Certain Foreign Purchases JUN 2008

52.232‐5 Payments under Fixed‐Price Construction Contracts MAY 2014

52.232‐23 Assignment Of Claims MAY 2014

52.232‐27 Prompt Payment for Construction Contracts MAY 2014

52.232‐33 Payment by Electronic Funds Transfer‐‐System for Award Management JUL 2013

52.232‐39 Unenforceability of Unauthorized Obligations JUN 2013

52.232‐40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013

52.233‐1 Disputes MAY 2014

52.233‐3 Protest After Award AUG 1996

52.233‐4 Applicable Law for Breach of Contract Claim OCT 2004

52.236‐5 Material and Workmanship APR 1984

52.236‐7 Permits and Responsibilities NOV 1991

52.236‐17 Layout of Work APR 1984

52.236‐26 Preconstruction Conference FEB 1995

52.242‐14 Suspension of Work APR 1984

52.243‐5 Changes and Changed Conditions APR 1984

52.244‐6 Subcontracts for Commercial Items JUN 2016

52.249‐1 Termination For Convenience Of The Government (Fixed Price) (Short Form)

APR 1984

52.252‐6 Authorized Deviations In Clauses APR 1984

52.253‐1 Computer Generated Forms JAN 1991

252.201‐7000 Contracting Officer's Representative DEC 1991

252.203‐7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011

252.203‐7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.204‐7003 Control Of Government Personnel Work Product APR 1992

252.204‐7004 Alt A System for Award Management Alternate A FEB 2014

252.204‐7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

DEC 2015

252.204‐7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016

252.223‐7008 Prohibition of Hexavalent Chromium JUN 2013

252.225‐7008 Restriction on Acquisition of Specialty Metals MAR 2013

252.225‐7048 Export‐Controlled Items JUN 2013

252.232‐7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012

252.232‐7010 Levies on Contract Payments DEC 2006

252.236‐7000 Modification Proposals‐Price Breakdown DEC 1991

252.236‐7001 Contract Drawings, and Specifications AUG 2000

252.243‐7001 Pricing Of Contract Modifications DEC 1991

252.244‐7000 Subcontracts for Commercial Items JUN 2013

252.247‐7023 Transportation of Supplies by Sea APR 2014

252.247‐7024 Notification Of Transportation Of Supplies By Sea MAR 2000

52.211‐10 COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK (APR 1984) ‐ ALTERNATE I

(APR 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the award of the contract, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 15 November 2016. The time stated for completion shall include final cleanup of the premises.

The completion date is based on the assumption that the successful offeror will receive the award by 17 August 2016. The completion date will be extended by the number of calendar days after the above date that the Contractor receives the notice to proceed, except to the extent that the delay in issuance of the notice to proceed results from the failure of the Contractor to execute the contract and give the required performance and payment bonds within the time specified in the offer.

(End of clause)

Section 00800 ‐ Special Contract Requirements

WAGE RATES

General Decision Number: IA160003 07/08/2016 IA3

Superseded General Decision Number: IA20150003

State: Iowa

Construction Type: Heavy River Work

Counties: Iowa Statewide.

HEAVY CONSTRUCTION PROJECTS LIMITED TO WORK ON OR PERTAINING TO, OR WITHIN THE

FLOOD PLAIN OF THE MISSISSIPPI AND MISSOURI RIVERS INCLUDING ALL HEAVY WORK ON

TRIBUTARIES AND LAKE ODESSA WITHIN THE FLOOD PLAIN OF THE RIVERS. HEAVY WORK

INCLUDES CANALS, CHANNELS, COFFERDAMS, DAMS, DIKES, DOCKS, DREDGING WORK, FLOOD

CONTROL PROJECTS, JETTIES, LAND RECLAMATION, LEVEE WORK, LOCKS, LOCK AND DAMS,

PUMPING STATIONS, RAILROAD BRIDGES,

RAILROAD CONSTRUCTION, SHORELINE MAINTENANCE, AND WATER WAY CONSTRUCTION.

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Davis-Bacon Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/08/2016 1 01/22/2016 2 05/13/2016 3 05/27/2016 4 07/08/2016

CARP0004-007 01/01/2016

SCOTT COUNTY

Rates Fringes

CARPENTER........................$ 28.69 22.01

* ENGI0150-008 06/01/2016

CEDAR, CLINTON, DES MOINES, LEE, LOUISA, MUSCATINE AND SCOTT COUNTIES

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 33.50 29.95

GROUP 2.....................$ 32.50 29.95

GROUP 3.....................$ 29.85 29.95

GROUP 4.....................$ 28.80 29.95

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Crane (Friction or Hydraulic, regardless of size or attachments); Tow or Push Boat

GROUP 2: Asphalt Heater-Planer Unit; Asphalt Paver; Asphalt Paver Screed; Asphalt Plant; Automatic Curbing Machine; Backfiller (throw bucket); Blastholer Self-Propelled Rotary Drill or Similar Machines; Boom Tractor or Side Boom; Boring Machine (Directional, Vertical or Horizontal); Building Hoist (1,2 or 3 drums); Caisson Auguring Machines; Central Redi-Mix Plant; Chip Spreader; Cleaning & Priming Machine; Combination Backhoe Front End Loader; Combination Concrete Finishing Machine and Float; Concrete Breaker or Hydro-Hammer; Concrete Conveyor or Pump; Concrete Paver; Concrete Spreader; Concrete Wheel Saw (Large self-propelled); Crusher (Stone, Concrete, Asphalt, etc.); Curing-Tinning Machine; Dipper Dredge Crane man; Dipper Dredge Operator; Dual Purpose Truck (Boom, Winch, etc.); Excavator; Farm-Type Tractor Operating Scoop or Scraper or with Power Attachment; Forklift (6000 lb. capacity); Grader, Motor Grader, Motor Patrol, Auto Grader, Form Grader, Pull Grader, Sub Grader, Elevating Grader; Group Equipment Greaser; Guard Rail Post Driver; Hoists; Hydraulic Dredge Leverman or Engineer; Hydro-Vac Truck Mounted or Pull Type, and Similar Equipment; Laser Screed; Loader (Track, Rubber Tire or Articulated); Locomotive Engineer; Mechanic- Welder; Mechanical Loaded Log Chippers or Similar Machines; Milling Machine; Mucking Machine; Pile Driver;

Pipe Bending; Pug Mill; Road Widener-Shoulder Spreader; Scraper (self-propelled); Self-Propelled Roller or Tire Roller (on Asphalt or Blacktop), Sheep Foot or Pad Foot Compactor; Shovel; Slip Form Paver; Steel Track-Type Tractor (Dozer, Push Cat, etc.); Transfer or Shuttle Buggy; Trenching Machine (40 H.P. & over); Work Boat.

GROUP 3: Articulated Off-Road Haul Unit; Asphalt Booster; Boiler (Engineer or Fireman); Conveyor Over 20 H.P.; Distributor; Driver on Truck Crane or Similar Machines; Elevator; Farm-Type Tractor (Without Power Attachment); Fireman & Pump Operator at Asphalt Plant; Forklift (Less than 6000 lb. capacity); Grout Pump;

Light Plant; Mechanical Broom; Mud Jack; Self-Propelled Roller (Other than listed in Group 2); Straddle Carrier;

Trench Machine (Under 40 H.P.).

GROUP 4: Air Compressor (400 C.F.M. or over); Compact Loader (Rubber Tire, Track & Utility); Engine Driven Welding Machine; Mechanical Heater (other than steam boiler); Small Outboard Motor Boat (Safety Boat & Life Boat); Water Pump (More than one well point pump).

ENGI0234-002 12/01/2012

REMAINING COUNTIES

Power equipment operators:

GROUP A.....................$ 32.24 12.90

GROUP B.....................$ 31.57 12.90

GROUP C.....................$ 29.31 12.90

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP A: Power shovel, crane, backhoe (1.5 yd and over), dragline, hoisting engineer (steel erection), motor patrol (finish), piledriver, master mechanic, sideboom tractor, horizontal boring machine, finish dozer, central mix plant, paver or self propelled spreader, tow, safety, or push boat, CMI paver, subgrader or equivalent, asphalt plant, pushcat, mechanics - welders, churn or rotary drill, trenching machine (Cleveland 80 or similar capacity), asphalt laydown, asphalt screed, asphalt heater planer, concrete pump, self-propelled curb machine (with seat), loader operator (2 cu yd and over), scraper, dozer (rough), group greaser, asphalt roller, backhoes of any size when digging building footings.

GROUP B: Motor patrol (rough), concrete curb breaking machine, loader (under 2 yd), backhoe under 1/2 yd, concrete widening machine, paver breaker, Barber Green, Haiss loader or similar machines, crawler tractor (pulling disc, sheepsfoot, ripper, or flat roller), self-propelled sheepsfoot roller, self-propelled roller, dristributor, screening and washing plant, self-propelled vibrating compactor, trenching machine, steel placing machine, conveyor, finishing machine (on concrete), flex plane, bullfloat, form grader, self-propelled elevator grader, water wagon on compaction

GROUP C: Boiler, mechanical boom, oiler, welding machine, Pump (other than dredge), boom and winch trucks, compressor, tank car heater (combination boiler and booster), pumps on well points and deep wells for dewatering, truck crane combination driver-oiler, concrete curbing machine, batch plant (dry), spreader attachments, utility tractor with attachments, light plant mechanical heater, pumps over 3", farm type tractor (pulling disc, harrow or roller).

IRON0111-005 07/01/2015

(EXCLUDING DES MOINES, LEE, DUBUQUE, CLAYTON, ALLAMAKEE, HARRISON,

POTTAWATTAMIE, MILLS, FREMONT, JACKSON, CLINTON, LOUISA, MUSCATINE, WOODBURY

AND MONONA COUNTIES)

Ironworker.......................$ 30.25 22.91

LABO0309-005 01/01/2016

SCOTT COUNTY

Rates Fringes

LABORERS

GROUP 1.....................$ 26.59 18.21

GROUP 2.....................$ 27.09 18.21

GROUP 3........