15-R-0003.pdf

SEE ADDENDUM

(No Collect Calls)

W912ES-15-R-0003 26-Feb-2015

b. TELEPHONE NUMBER

651-290-5444

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 17 Mar 2015

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912ES9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JESSE L ONKKA

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

W81G6743380048

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

WOMEN-OWNED SMALL

BUSINESS (WOSB)

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

CONTRACTING DIVISION

USACE - ST. PAUL

180 5TH STREET E SUITE 700

ST. PAUL MN 55101-1678

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL BUSINESS

(EDWOSB)

SIZE STANDARD:

500 Employees

NAICS:

213111

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF264

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912ES-15-R-0003

BASE REQUIREMENT - EAST AREA (See Map in Statement of Work )

Period of Performance: One year from Contract Award

Item Description Quantit y U/I

Unit Price Net Amt

0001 RENTAL OF DRILL RIG A

0001AA

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level D as defined by OSHA. See details in Section 2a. 200 Hours

0001AB

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level C as defined by OSHA. See details in Section 2a. 25 Hours

0001AC Mobilization and Demobilization Fees per Task Order 5 Each

0002 RENTAL OF DRILL RIG B

0002AA

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level D as defined by OSHA. See details in Section 2b 100 Hours

0002AB

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level C as defined by OSHA. See details in Section 2b 25 Hours

0002AC Mobilization and Demobilization Fees per Task Order 5 each

0003 RENTAL OF DRILL RIG C

0003AA

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level D as defined by OSHA. See details in Section 2c. 100 Hours

0003AB

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level C as defined by OSHA. See details in Section 2c. 25 Hours

0003AC Mobilization and Demobilization Per Task Order 2 Each

0004 RENTAL OF DRILL RIG D

0004AA

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level D as defined by OSHA. See details in section 2d. 80 Hours

0004AB

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level C as defined by OSHA. See details in section 2d. 20 Hours

0004AC Mobilization and Demobilization Per Task Order 2 Each

0005 RENTAL OF DRILL RIG E

0005AA

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level D as defined by OSHA. See details in Section 2e. 80 Hours

0005AB

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level C as defined by OSHA. See details in Section 2e. 20 Hours

0005AC Mobilization and Demobilization Per Task Order 2 Each

0006 RENTAL OF PIEZOCONE SYSTEM

0006AA

Rental of Piezocone (CPTu) system with operator, Level D as defined by OSHA. See details in section 3 200 Hours

0006AB

Rental of Piezocone (CPTu) system, Level C as Defined by OSHA. See Details in section 2d. 10 Hours

0006AC Mobilization and Demobilization Per Task Order 10 Each

0007 DRILL HELPER 60 Hours

0008 Samples

0008AA 3‐inch Thin‐Wall Samples 30 Each

0008AB 5‐inch Thin Wall Samples 50 Each

0008AC 3‐inch Horslev Type Piston Samples 10 Each

0008AD 5‐inch Horslev Type Piston Samples 50 Each

0008AE NQ‐3 or Equivalent Core Drilling in Rock or Concrete 75 Foot

0008AF HQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

0008AG HQ Wireline Core Drilling in Rock or Concrete 150 Foot

0008AH PQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

0008AJ

Double‐tube core barrel (6" x 7 3/4" or equivalent) for Core Drilling in Rock or Concrete 50 Foot

0009 PER DIEM (To be paid in accordance with the Joint Travel Regulations) 160 Day

0010 Portable Steam Cleaner Rental 10 Day

DOT‐Approved Containers (Drums) for Contaminated Soils, Drilling

Fluid, or Decontamination Water 10 Each

0012 BACKFILL MATERIAL

0012AA Portland Cement – 94‐Pound Bags 100 Bag

0012AB High Solids Bentonite Grout – 50‐Pound Bags 100 Bag

0012AC Bentonite Chips – 50‐Pound Bags 100 Bag

0012AD

Filter Pack Sand For Piezometers and Monitoring Wells With #10‐Slot Screens, 50‐Pound Bags 20 Bag

0012AE Barite Drilling Additive – 50‐Pound Bags 10 Bag

0013 Monitoring Well, Piezometer and Instrumentation Casing

0013AA

Nominal 1” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 140 Each

0013AB

Nominal 1” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size, Schedule 40, 5‐ft. Section Length 30 Each

0013AC

Nominal 2” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 40 Each

0013AD

Nominal 2” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size 10 Each

0013AE 4‐Inch Protective Guard Posts 12 Each

0013AF

4‐Inch Diameter Monitoring Well Protective Casing with Locking Cover 70 Foot

0013AG

6‐Inch Diameter Monitoring Well Protective Casing with Locking 140 Foot

0013AH

8‐Inch Diameter Monitoring Well Protective Casing with Locking Cover 35 Foot

East Area Base Year Total

BASE REQUIREMENT - WEST AREA (See Map in Statement of Work )

Period of Performance: One year from Contract Award

Item Description Quantit y U/I

Unit Price Net Amt

0014 RENTAL OF DRILL RIG A

0014AA

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level D as defined by OSHA. See details in Section 2a. 200 Hours

0014AB

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level C as defined by OSHA. See details in Section 2a. 25 Hours

0014AC Mobilization and Demobilization Fees per Task Order 5 Each

0015 RENTAL OF DRILL RIG B

0015AA

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level D as defined by OSHA. See details in Section 2b 100 Hours

0015AB

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level C as defined by OSHA. See details in Section 2b 25 Hours

0015AC Mobilization and Demobilization Fees per Task Order 5 each

0016 RENTAL OF DRILL RIG C

0016AA

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level D as defined by OSHA. See details in Section 2c. 100 Hours

0016AB

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level C as defined by OSHA. See details in Section 2c. 25 Hours

0016AC Mobilization and Demobilization Per Task Order 2 Each

0017 RENTAL OF DRILL RIG D

0017AA

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level D as defined by OSHA. See details in section 2d. 80 Hours

0017AB

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level C as defined by OSHA. See details in section 2d. 20 Hours

0017AC Mobilization and Demobilization Per Task Order 2 Each

0018 RENTAL OF DRILL RIG E

0018AA

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level D as defined by OSHA. See details in Section 2e. 80 Hours

0018AB

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level C as defined by OSHA. See details in Section 2e. 20 Hours

0018AC Mobilization and Demobilization Per Task Order 2 Each

0019 RENTAL OF PIEZOCONE SYSTEM

0019AA

Rental of Piezocone (CPTu) system with operator, Level D as defined by OSHA. See details in section 3 200 Hours

0019AB

Rental of Piezocone (CPTu) system, Level C as Defined by OSHA. See Details in section 2d. 10 Hours

0019AC Mobilization and Demobilization Per Task Order 10 Each

0020 DRILL HELPER 60 Hours

0021 Samples

0021AA 3‐inch Thin‐Wall Samples 30 Each

0021AB 5‐inch Thin Wall Samples 50 Each

0021AC 3‐inch Horslev Type Piston Samples 10 Each

0021AD 5‐inch Horslev Type Piston Samples 50 Each

0021AE NQ‐3 or Equivalent Core Drilling in Rock or Concrete 75 Foot

0021AF HQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

0021AG HQ Wireline Core Drilling in Rock or Concrete 150 Foot

0021AH PQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

0021AJ

Double‐tube core barrel (6" x 7 3/4" or equivalent) for Core Drilling in Rock or Concrete 50 Foot

0022 PER DIEM (To be paid in accordance with the Joint Travel Regulations) 160 Day

0023 Portable Steam Cleaner Rental 10 Day

DOT‐Approved Containers (Drums) for Contaminated Soils, Drilling

Fluid, or Decontamination Water 10 Each

0025 BACKFILL MATERIAL

0025AA Portland Cement – 94‐Pound Bags 100 Bag

0025AB High Solids Bentonite Grout – 50‐Pound Bags 100 Bag

00258AC Bentonite Chips – 50‐Pound Bags 100 Bag

0025AD

Filter Pack Sand For Piezometers and Monitoring Wells With #10‐Slot Screens, 50‐Pound Bags 20 Bag

0025AE Barite Drilling Additive – 50‐Pound Bags 10 Bag

0026 Monitoring Well, Piezometer and Instrumentation Casing

0026AA

Nominal 1” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 140 Each

0026AB

Nominal 1” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size, Schedule 40, 5‐ft. Section Length 30 Each

0026AC

Nominal 2” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 40 Each

0026AD

Nominal 2” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size 10 Each

0026AE 4‐Inch Protective Guard Posts 12 Each

0026AF

4‐Inch Diameter Monitoring Well Protective Casing with Locking Cover 70 Foot

0026AG

6‐Inch Diameter Monitoring Well Protective Casing with Locking 140 Foot

0026AH

8‐Inch Diameter Monitoring Well Protective Casing with

West Area Base Year Total

Option Year One - EAST AREA (See Map in Statement of Work )

Period of Performance: One year from End of Base

Item Description Quantit y U/I

Unit Price Net Amt

1001 RENTAL OF DRILL RIG A

1001AA

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level D as defined by OSHA. See details in Section 2a. 200 Hours

1001AB

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level C as defined by OSHA. See details in Section 2a. 25 Hours

1001AC Mobilization and Demobilization Fees per Task Order 5 Each

1002 RENTAL OF DRILL RIG B

1002AA

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level D as defined by OSHA. See details in Section 2b 100 Hours

1002AB

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level C as defined by OSHA. See details in Section 2b 25 Hours

1002AC Mobilization and Demobilization Fees per Task Order 5 each

1003 RENTAL OF DRILL RIG C

1003AA

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level D as defined by OSHA. See details in Section 2c. 100 Hours

1003AB

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level C as defined by OSHA. See details in Section 2c. 25 Hours

1003AC Mobilization and Demobilization Per Task Order 2 Each

1004 RENTAL OF DRILL RIG D

1004AA

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level D as defined by OSHA. See details in section 2d. 80 Hours

1004AB

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level C as defined by OSHA. See details in section 2d. 20 Hours

1004AC Mobilization and Demobilization Per Task Order 2 Each

1005 RENTAL OF DRILL RIG E

1005AA

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level D as defined by OSHA. See details in Section 2e. 80 Hours

1005AB

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level C as defined by OSHA. See details in Section 2e. 20 Hours

1005AC Mobilization and Demobilization Per Task Order 2 Each

1006 RENTAL OF PIEZOCONE SYSTEM

1006AA

Rental of Piezocone (CPTu) system with operator, Level D as defined by OSHA. See details in section 3 200 Hours

1006AB

Rental of Piezocone (CPTu) system, Level C as Defined by OSHA. See Details in section 2d. 10 Hours

1006AC Mobilization and Demobilization Per Task Order 10 Each

0007 DRILL HELPER 60 Hours

0008 Samples

1008AA 3‐inch Thin‐Wall Samples 30 Each

1008AB 5‐inch Thin Wall Samples 50 Each

1008AC 3‐inch Horslev Type Piston Samples 10 Each

1008AD 5‐inch Horslev Type Piston Samples 50 Each

1008AE NQ‐3 or Equivalent Core Drilling in Rock or Concrete 75 Foot

1008AF HQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

1008AG HQ Wireline Core Drilling in Rock or Concrete 150 Foot

1008AH PQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

1008AJ

Double‐tube core barrel (6" x 7 3/4" or equivalent) for Core Drilling in Rock or Concrete 50 Foot

1009 PER DIEM (To be paid in accordance with the Joint Travel Regulations) 160 Day

1010 Portable Steam Cleaner Rental 10 Day

DOT‐Approved Containers (Drums) for Contaminated Soils, Drilling

Fluid, or Decontamination Water 10 Each

1012 BACKFILL MATERIAL

1012AA Portland Cement – 94‐Pound Bags 100 Bag

1012AB High Solids Bentonite Grout – 50‐Pound Bags 100 Bag

1012AC Bentonite Chips – 50‐Pound Bags 100 Bag

1012AD

Filter Pack Sand For Piezometers and Monitoring Wells With #10‐Slot Screens, 50‐Pound Bags 20 Bag

1012AE Barite Drilling Additive – 50‐Pound Bags 10 Bag

1013 Monitoring Well, Piezometer and Instrumentation Casing

1013AA

Nominal 1” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 140 Each

1013AB

Nominal 1” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size, Schedule 40, 5‐ft. Section Length 30 Each

1013AC

Nominal 2” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 40 Each

1013AD

Nominal 2” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size 10 Each

1013AE 4‐Inch Protective Guard Posts 12 Each

1013AF

4‐Inch Diameter Monitoring Well Protective Casing with Locking Cover 70 Foot

1013AG

6‐Inch Diameter Monitoring Well Protective Casing with Locking 140 Foot

1013AH

8‐Inch Diameter Monitoring Well Protective Casing with

East Area Option Year One Total

Option Year One - WEST AREA (See Map in Statement of Work )

Period of Performance: One year from End of Base

Item Description Quantit y U/I

Unit Price Net Amt

1014 RENTAL OF DRILL RIG A

1014AA

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level D as defined by OSHA. See details in Section 2a. 200 Hours

1014AB

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level C as defined by OSHA. See details in Section 2a. 25 Hours

1014AC Mobilization and Demobilization Fees per Task Order 5 Each

1015 RENTAL OF DRILL RIG B

1015AA

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level D as defined by OSHA. See details in Section 2b 100 Hours

1015AB

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level C as defined by OSHA. See details in Section 2b 25 Hours

1015AC Mobilization and Demobilization Fees per Task Order 5 each

1016 RENTAL OF DRILL RIG C

1016AA

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level D as defined by OSHA. See details in Section 2c. 100 Hours

1016AB

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level C as defined by OSHA. See details in Section 2c. 25 Hours

1016AC Mobilization and Demobilization Per Task Order 2 Each

1017 RENTAL OF DRILL RIG D

1017AA

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level D as defined by OSHA. See details in section 2d. 80 Hours

1017AB

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level C as defined by OSHA. See details in section 2d. 20 Hours

1017AC Mobilization and Demobilization Per Task Order 2 Each

1018 RENTAL OF DRILL RIG E

1018AA

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level D as defined by OSHA. See details in Section 2e. 80 Hours

1018AB

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level C as defined by OSHA. See details in Section 2e. 20 Hours

1018AC Mobilization and Demobilization Per Task Order 2 Each

1019 RENTAL OF PIEZOCONE SYSTEM

1019AA

Rental of Piezocone (CPTu) system with operator, Level D as defined by OSHA. See details in section 3 200 Hours

1019AB

Rental of Piezocone (CPTu) system, Level C as Defined by OSHA. See Details in section 2d. 10 Hours

1019AC Mobilization and Demobilization Per Task Order 10 Each

1020 DRILL HELPER 60 Hours

1021 Samples

1021AA 3‐inch Thin‐Wall Samples 30 Each

1021AB 5‐inch Thin Wall Samples 50 Each

1021AC 3‐inch Horslev Type Piston Samples 10 Each

1021AD 5‐inch Horslev Type Piston Samples 50 Each

1021AE NQ‐3 or Equivalent Core Drilling in Rock or Concrete 75 Foot

1021AF HQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

1021AG HQ Wireline Core Drilling in Rock or Concrete 150 Foot

1021AH PQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

1021AJ

Double‐tube core barrel (6" x 7 3/4" or equivalent) for Core Drilling in Rock or Concrete 50 Foot

1022 PER DIEM (To be paid in accordance with the Joint Travel Regulations) 160 Day

1023 Portable Steam Cleaner Rental 10 Day

DOT‐Approved Containers (Drums) for Contaminated Soils, Drilling

Fluid, or Decontamination Water 10 Each

1025 BACKFILL MATERIAL

1025AA Portland Cement – 94‐Pound Bags 100 Bag

1025AB High Solids Bentonite Grout – 50‐Pound Bags 100 Bag

10258AC Bentonite Chips – 50‐Pound Bags 100 Bag

1025AD

Filter Pack Sand For Piezometers and Monitoring Wells With #10‐Slot Screens, 50‐Pound Bags 20 Bag

1025AE Barite Drilling Additive – 50‐Pound Bags 10 Bag

1026 Monitoring Well, Piezometer and Instrumentation Casing

1026AA

Nominal 1” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 140 Each

1026AB

Nominal 1” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size, Schedule 40, 5‐ft. Section Length 30 Each

1026AC

Nominal 2” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 40 Each

1026AD

Nominal 2” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size 10 Each

1026AE 4‐Inch Protective Guard Posts 12 Each

1026AF

4‐Inch Diameter Monitoring Well Protective Casing with Locking Cover 70 Foot

1026AG

6‐Inch Diameter Monitoring Well Protective Casing with Locking 140 Foot

1026AH

8‐Inch Diameter Monitoring Well Protective Casing with

West Area Option Year One Total

Option Year Two - EAST AREA (See Map in Statement of Work )

Period of Performance: One year from End of Option 1

Item Description Quantit y U/I

Unit Price Net Amt

2001 RENTAL OF DRILL RIG A

2001AA

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level D as defined by OSHA. See details in Section 2a. 200 Hours

2001AB

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level C as defined by OSHA. See details in Section 2a. 25 Hours

2001AC Mobilization and Demobilization Fees per Task Order 5 Each

2002 RENTAL OF DRILL RIG B

2002AA

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level D as defined by OSHA. See details in Section 2b 100 Hours

2002AB

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level C as defined by OSHA. See details in Section 2b 25 Hours

2002AC Mobilization and Demobilization Fees per Task Order 5 each

2003 RENTAL OF DRILL RIG C

2003AA

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level D as defined by OSHA. See details in Section 2c. 100 Hours

2003AB

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level C as defined by OSHA. See details in Section 2c. 25 Hours

2003AC Mobilization and Demobilization Per Task Order 2 Each

2004 RENTAL OF DRILL RIG D

2004AA

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level D as defined by OSHA. See details in section 2d. 80 Hours

2004AB

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level C as defined by OSHA. See details in section 2d. 20 Hours

2004AC Mobilization and Demobilization Per Task Order 2 Each

2005 RENTAL OF DRILL RIG E

2005AA

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level D as defined by OSHA. See details in Section 2e. 80 Hours

2005AB

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level C as defined by OSHA. See details in Section 2e. 20 Hours

2005AC Mobilization and Demobilization Per Task Order 2 Each

2006 RENTAL OF PIEZOCONE SYSTEM

2006AA

Rental of Piezocone (CPTu) system with operator, Level D as defined by OSHA. See details in section 3 200 Hours

2006AB

Rental of Piezocone (CPTu) system, Level C as Defined by OSHA. See Details in section 2d. 10 Hours

2006AC Mobilization and Demobilization Per Task Order 10 Each

2007 DRILL HELPER 60 Hours

2008 Samples

2008AA 3‐inch Thin‐Wall Samples 30 Each

2008AB 5‐inch Thin Wall Samples 50 Each

2008AC 3‐inch Horslev Type Piston Samples 10 Each

2008AD 5‐inch Horslev Type Piston Samples 50 Each

2008AE NQ‐3 or Equivalent Core Drilling in Rock or Concrete 75 Foot

2008AF HQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

2008AG HQ Wireline Core Drilling in Rock or Concrete 150 Foot

2008AH PQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

2008AJ

Double‐tube core barrel (6" x 7 3/4" or equivalent) for Core Drilling in Rock or Concrete 50 Foot

2009 PER DIEM (To be paid in accordance with the Joint Travel Regulations) 160 Day

2010 Portable Steam Cleaner Rental 10 Day

DOT‐Approved Containers (Drums) for Contaminated Soils, Drilling

Fluid, or Decontamination Water 10 Each

2012 BACKFILL MATERIAL

2012AA Portland Cement – 94‐Pound Bags 100 Bag

2012AB High Solids Bentonite Grout – 50‐Pound Bags 100 Bag

2012AC Bentonite Chips – 50‐Pound Bags 100 Bag

2012AD

Filter Pack Sand For Piezometers and Monitoring Wells With #10‐Slot Screens, 50‐Pound Bags 20 Bag

2012AE Barite Drilling Additive – 50‐Pound Bags 10 Bag

2013 Monitoring Well, Piezometer and Instrumentation Casing

2013AA

Nominal 1” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 140 Each

2013AB

Nominal 1” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size, Schedule 40, 5‐ft. Section Length 30 Each

2013AC

Nominal 2” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 40 Each

2013AD

Nominal 2” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size 10 Each

2013AE 4‐Inch Protective Guard Posts 12 Each

2013AF

4‐Inch Diameter Monitoring Well Protective Casing with Locking Cover 70 Foot

2013AG

6‐Inch Diameter Monitoring Well Protective Casing with Locking 140 Foot

2013AH

8‐Inch Diameter Monitoring Well Protective Casing with

East Area Option Year Two Total

Option Year Two - WEST AREA (See Map in Statement of Work )

Period of Performance: One year from End of Option 1

Item Description Quantit y U/I

Unit Price Net Amt

2014 RENTAL OF DRILL RIG A

2014AA

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level D as defined by OSHA. See details in Section 2a. 200 Hours

2014AB

Drill Rig A, Geotechnical Drilling Rig ATV, Track‐Mounted, Level C as defined by OSHA. See details in Section 2a. 25 Hours

2014AC Mobilization and Demobilization Fees per Task Order 5 Each

2015 RENTAL OF DRILL RIG B

2015AA

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level D as defined by OSHA. See details in Section 2b 100 Hours

2015AB

Drill Rig B, Flotation‐Tire, 4‐Wheel‐Drive Geotechnical Drilling Rig, ATV, Level C as defined by OSHA. See details in Section 2b 25 Hours

2015AC Mobilization and Demobilization Fees per Task Order 5 each

2016 RENTAL OF DRILL RIG C

2016AA

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level D as defined by OSHA. See details in Section 2c. 100 Hours

016AB

Drill Rig C, Truck‐mounted Geotechnical Drilling Rig, (2‐ Wheel or 4‐Wheel Drive) Level C as defined by OSHA. See details in Section 2c. 25 Hours

2016AC Mobilization and Demobilization Per Task Order 2 Each

2017 RENTAL OF DRILL RIG D

2017AA

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level D as defined by OSHA. See details in section 2d. 80 Hours

2017AB

Drill Rig D, Winch‐Operated Skid Frame, Rotary Drilling Rig, Level C as defined by OSHA. See details in section 2d. 20 Hours

2017AC Mobilization and Demobilization Per Task Order 2 Each

2018 RENTAL OF DRILL RIG E

2018AA

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level D as defined by OSHA. See details in Section 2e. 80 Hours

2018AB

Drill Rig E, Portable (Hand Carried) Pipe‐Driving Winch, Level C as defined by OSHA. See details in Section 2e. 20 Hours

2018AC Mobilization and Demobilization Per Task Order 2 Each

2019 RENTAL OF PIEZOCONE SYSTEM

2019AA

Rental of Piezocone (CPTu) system with operator, Level D as defined by OSHA. See details in section 3 200 Hours

2019AB

Rental of Piezocone (CPTu) system, Level C as Defined by OSHA. See Details in section 2d. 10 Hours

2019AC Mobilization and Demobilization Per Task Order 10 Each

2020 DRILL HELPER 60 Hours

2021 Samples

2021AA 3‐inch Thin‐Wall Samples 30 Each

2021AB 5‐inch Thin Wall Samples 50 Each

2021AC 3‐inch Horslev Type Piston Samples 10 Each

2021AD 5‐inch Horslev Type Piston Samples 50 Each

2021AE NQ‐3 or Equivalent Core Drilling in Rock or Concrete 75 Foot

2021AF HQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

2021AG HQ Wireline Core Drilling in Rock or Concrete 150 Foot

2021AH PQ‐3 or Equivalent Core Drilling in Rock or Concrete 100 Foot

Section SF 1449 - CONTINUATION SHEET

Contents

PERFORMANCE WORK STATEMENT

TABLE OF CONTENTS

PERFORMANCE WORK STATEMENT

52.203-3 GRATUITIES (APR 1984)

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO INFORM . 29

2021AJ

Double‐tube core barrel (6" x 7 3/4" or equivalent) for Core Drilling in Rock or Concrete 50 Foot

2022 PER DIEM (To be paid in accordance with the Joint Travel Regulations) 160 Day

2023 Portable Steam Cleaner Rental 10 Day

DOT‐Approved Containers (Drums) for Contaminated Soils, Drilling

Fluid, or Decontamination Water 10 Each

2025 BACKFILL MATERIAL

2025AA Portland Cement – 94‐Pound Bags 100 Bag

2025AB High Solids Bentonite Grout – 50‐Pound Bags 100 Bag

20258AC Bentonite Chips – 50‐Pound Bags 100 Bag

2025AD

Filter Pack Sand For Piezometers and Monitoring Wells With #10‐Slot Screens, 50‐Pound Bags 20 Bag

2025AE Barite Drilling Additive – 50‐Pound Bags 10 Bag

2026 Monitoring Well, Piezometer and Instrumentation Casing

2026AA

Nominal 1” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 140 Each

026AB

Nominal 1” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size, Schedule 40, 5‐ft. Section Length 30 Each

2026AC

Nominal 2” PVC Flush‐Threaded Riser Pipe, Schedule 40, 10‐ft. Section Length 40 Each

2026AD

Nominal 2” PVC Flush‐Threaded Well Screen, Continuous‐ Slot, #10‐Slot Size 10 Each

2026AE 4‐Inch Protective Guard Posts 12 Each

2026AF

4‐Inch Diameter Monitoring Well Protective Casing with Locking Cover 70 Foot

2026AG

6‐Inch Diameter Monitoring Well Protective Casing with Locking 140 Foot

2026AH

8‐Inch Diameter Monitoring Well Protective Casing with

West Area Option Year two Total

EMPLOYEES OF WHISTLEBLOWER RIGHTS (APR 2014)

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper (May 2011)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (JULY 2013)

52.204-16 Commercial and Government Entity Code Reporting (Nov 2014) 52.204-18 Commercial and Government Entity Code Maintenance (Nov 2014) 52.204-19 Incorporation by Reference of Representations and Certifications (DEC

52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (JULY 2013)

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (APR 2014)

52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (DEC 2014)

ALTERNATE I (OCT 2014)

52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS (MAY 2014)

52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (Dec 2014) 52.216-19 Order Limitations. (OCT 1995)

52.216-22 INDEFINITE QUANTITY. (OCT 1995)

52.216-27 SINGLE OR MULTIPLE AWARDS. (OCT 1995)

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS (DEC 2013)

52.245-1 GOVERNMENT PROPERTY (APR 2012)

52.245-9 USE AND CHARGES (APR 2012)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (SEP

2011)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013)

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

252.204-7004 ALTERNATE A, SYSTEM FOR AWARD MANAGEMENT (FEB 2014)

252.204-7011 ALTERNATIVE LINE-ITEM STRUCTURE (SEP 2011)

252.204-7012 SAFEGUARDING OF UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION (NOV

2013) 252.204-7015 DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (FEB 2014)

252.209-7992 REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX

LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW—FISCAL YEAR 2015

APPROPRIATIONS (DEVIATION 2015-OO0005) (DEC 2014)

252.211-7007 Reporting of Government-Furnished PROPERTY (AUG 2012)

252.216-7006 ORDERING (MAY 2011)

252.223-7008 Prohibition of Hexavalent Chromium (JUN 2013)

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (FEB 2013)

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS AND INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (SEP 2004)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (DEC 2012)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013)

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA (APR 2014)

252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000)

AT/OPSEC 13: Will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas AT/OPSEC 15: Pre‐screen candidates using E‐Verify Program AT/OPSEC 3: Access and General Protection/Security Policy and Procedures

SCOPE OF WORK

US ARMY CORPS OF ENGINEERS

DRILL RIG RENTAL AND SUPPORT SERVICES CONTRACT

EASTERN AND WESTERN AREAS, ST. PAUL DISTRICT

PARTS OF NORTH AND SOUTH DAKOTA, AND PARTS OF MINNESOTA, WISCONSIN, AND IOWA

PERFORMANCE WORK STATEMENT

DESCRIPTION/SPECIFICATIONS

TABLE OF CONTENTS

SECTION NO.:

1 GENERAL/INTRODUCTION

2 EQUIPMENT AND SUPPLIES

3 CONE PENETROMETER TESTS

4 MOBILIZATION AND DEMOBILIZATION (MOB. AND DEMOB.)

5 SITE SAFETY, UTILITY MEETINGS, ROAD USE PERMITS, MONITORING

WELL PERMITS, NOTIFICATIONS, AND BORING ABANDONMENTS

6 MILEAGE

7 PROJECT LOCATION

8 OPERATING PERSONNEL

9 MAINTENANCE AND REPLACEMENT OF EQUIPMENT

10 OPERATING AND WORKING TIME

11 PER DIEM

12 MONITORING WELL & PIEZOMETER MATERIALS

13 TASK ORDERS

PERFORMANCE WORK STATEMENT

DRILL RIG RENTAL AND SUPPORT SERVICES CONTRACT

1 GENERAL. Rental of Drilling Equipment with Operating Personnel and Supplies. Mileage for all vehicle use necessary to accomplish the work, and that is not covered by mobilization and demobilization, shall be included in payment for Rental of Drilling Equipment. There shall be no separate payment for mileage. A Government Inspector will be on-site to log borings and inspect the work. At the time of the contract award the Contractor shall have all the necessary licenses, registration, etc, for personnel and equipment, to begin work immediately in all the states in which the awarded contract applies. The Contractor shall furnish drilling equipment, support vehicle(s), supplies, and operating personnel capable of efficiently performing the following:

a. 4-inch through 10-inch flight auger borings;

b. Borings through cohesionless and cohesive soils with 3-inch through 10-inch diameter fishtail, or tricone roller bits, and a split-spoon sampler using drilling mud in lieu of casing. Upward directed drilling fluid return type bits may be required in engineered embankments;

c. Borings using 4-inch through 10-inch diameter pipe casing;

d. Auger-through and split-spoon sampling of cohesionless and cohesive soils with 3 ¼-inch, 4 ¼-inch, 6 ¼-inch, and 8 ¼-inch I.D. hollow stem augers;

e. Standard Penetration Tests (SPT’s) per ASTM 1586-84 (Re-approved 1992), with automatic drive hammer and cathead driven safety hammer. Split-spoon sampler shall conform to "Standard Split-Barrel Assembly" detailed in

ASTM 1586-84;

f. Continuous soil sampling with the SPT barrel and a 2-inch I.D X 2 1/2-inch O.D. X 3-foot-long split-barrel sampler;

g. 3-inch and 5-inch thin wall undisturbed soil sampling;

h. 3-inch and 5-inch Hvorslev-type fixed piston undisturbed sampling;

i. Coring of bedrock and rebar reinforced concrete with NQ-3, HQ-3, HQ-Wireline, PQ-3 and 6-inch x 7 3/4-inch diameter core barrels or equivalent. The appropriate diamond and carbide coring bits shall include internal and bottom discharge type;

j. Abandonment and backfilling of boreholes and CPTu soundings, per appropriate state requirements, by gravity and/or pump and tremie system with cement/bentonite, high solids bentonite, bentonite chips, barite and/or neat cement grout;

k. Rotary borings through rock, reinforced concrete, and cohesionless and cohesive soils. A mud pump, mud pan or tank, mud mixing apparatus, water tank and pump for filling tank, appropriate hoses, and bentonite drilling mud shall be on site for each project;

l. Well screen and riser installations, for the purpose of constructing observation and monitoring wells (up to 2-inch diameter), direct burial piezometers and/or standpipe piezometers (up to 2-inch diameter), installing inclinometer casing (3.5-inch O.D.), instrument protective casings and covers, and other instrumentation. Borings through cohesive and granular soils, concrete, and rock, to set instrument pipe and casing, to install protective casing, and to backfill instrument installations with selected materials, as requested by the Contracting Officer;

m. All types of soil and rock borings in Level D or Level C personal protective gear as defined by OSHA;

n. Decontamination of all equipment before the Contractor arrives at the drilling site, between the sample intervals, boreholes, or before the Contractor leaves the drilling site as is deemed necessary in the SCOPE OF WORK for the Task Order;

o. Remote drill-site access prior to drilling to include removal of brush and small trees with chainsaw or appropriate methods, snow removal, site leveling as necessary;

p. Worksite restoration to pre-drilling conditions to include, but not limited to, removing auger and drill cuttings and repair ground damage at borehole sites, as requested by the Contracting Officer;

q. Drill the majority of holes to a depth of less than 100 feet using DRILL RIGS A-D listed below. However, the Contractor may be required to drill and sample up to 300 feet in depth using equipment identified as DRILL RIGS B and DRILL RIG C. DRILL RIG A shall be capable to drill and sample to depths of at least 200 feet. DRILL RIG E shall be capable to drill and sample to a depth of 50 feet;

2 EQUIPMENT AND SUPPLIES. Equipment requirements will vary from job to job as requested in individual TASK ORDERS and defined in each SCOPE OF WORK. A typical SCOPE OF WORK will define the project requirements and will request the rig that can access the most remote boring. The majority of the projects involve continuous split-spoon sampling using Hollow Stem Auger to advance and clean the hole between samples, and mud-rotary drilling for maintaining an open borehole below the water table. A support vehicle (pickup truck or cargo truck) shall be included in the rental of each Drill Rig or CPTu SYSTEM. No separate payment will be made for a support vehicle. Some projects may require more than one type drill rig and operating crew at the same time. Individual task orders will specify the project requirements. The five different drill rig types and CPTu system required for this contract and detailed in section 2a. through 2f. are: DRILL RIG A (All-Terrain Vehicle, Track-Mounted); DRILL RIG B (All-Terrain Vehicle, with large Balloon or Flotation Tires); DRILL RIG C, (Truck-Mounted 2 or 4-Wheel-Drive); DRILL RIG D (Skid Rig with Rotary Drilling Capability); DRILL RIG E (Portable, Hand-Carried) Pipe-Driving Winch Rig; and CPTu SYSTEM (See section 4 for details of CPTu System) pushed by one of the above Drill Rigs. The equipment will be used on all types of terrain including but not limited to woods, steep hills, bogs frozen lakes and swamps, and site conditions, dry, wet, or muddy. It will be used in all weather conditions; snow, rain, ice, sub-zero temperatures. Rental equipment may be used on Government-owned or rented floating plants on rivers, harbors, and lakes. The Contractor shall furnish all equipment and supplies necessary to perform the required drilling to include, but not limited to, the following:

a. DRILL RIG A: All-Terrain Vehicle (ATV), Track-Mounted Rig with rotary drill and accessory equipment, designed for geotechnical drilling, rock coring, hollow stem augering, and split-spoon sampling, with automatic driven hammer AND cathead-driven safety hammer, for conducting SPT’s per ASTM 1586-84. Drill rig must be designed for accessing remote sites, traveling over uneven terrain, over snow, and on very soft and/or wet ground.

It should have a ground pressure variant of 4 psi or less with proper weight distribution and stability. Two hydraulic leveling jacks shall be fitted at the rear of the vehicle and at least one on the front. The drill mast shall be operated hydraulically, and shall be fitted with sheaves for at least three (3) cables and one (1) rope. The drill rig shall be transported on a trailer between sites. The drill rig shall also be equipped with an attached or attachable water tank of at least 100 gallons that can be brought into remote mud-rotary drill sites that trailered water tanks or support vehicles with water tanks cannot access. The drill rig shall also be equipped with a pump capable to pump bentonite drilling fluid required to keep the holes open and remove cuttings, as well as cementious grout mixes to abandon the borings or wells.

b. DRILL RIG B: All-Terrain Vehicle (ATV), Flotation-Tired, Four-Wheel-Drive Rig with rotary drill and accessory equipment; designed for geotechnical drilling, rock coring, hollow stem augering, and split-spoon sampling, with automatic drive hammer AND cathead-driven safety hammer for conducting SPT’s per ASTM 1586-

84. Drill rig must be designed for accessing remote sites traveling over uneven terrain, over snow, and on soft and/or wet ground. It should have a ground pressure of 7.5 psi or less with weight evenly distributed. Two hydraulic leveling jacks shall be fitted at the rear of the ATV and at least one on the front. The drill mast shall be operated hydraulically, and shall be fitted with sheaves for at least three (3) cables and one (1) rope. Power winches of not less than 12-ton capacity and with not less than 150 feet of 3/4-inch diameter steel cable shall be mounted on the front of the ATV. The drill rig must have the rotary capabilities of operating at a forward speed from 0 to 650 rpm. The rotary drive shall have a reverse gear and a maximum drill spindle torque of not less than 7,000 ft./lbs.

The vertical drive shall have a stroke of at least 72 inches, downward thrust of not less than 16,000 lbs., and retraction of at least 24,000 lbs. Length of rig from bumper to bumper shall not exceed 24 feet. The drill rig shall also be equipped with an attached or attachable water tank of at least 100 gallons that can be brought into remote mud-rotary drill sites that trailered water tanks or support vehicles with water tanks cannot access. The drill rig shall also be equipped with a pump capable of pumping bentonite drilling fluid required to keep the holes open and remove cuttings, as well as cementious grout mixes to abandon the borings or wells.

c. DRILL RIG C: Truck-Mounted (Two-Wheel-Drive or Four-Wheel-Drive) with rotary drill and accessory equipment; designed for geotechnical drilling, rock coring, hollow stem augering, and split-spoon sampling, with automatic drive hammer AND cathead-driven safety hammer for conducting SPT’s per ASTM 1586-84. Drill rig must be designed for driving up to sites with roadway or firm ground access. It shall be ready to set up and drill using hollow stem auger and mud rotary drilling. Two hydraulic leveling jacks shall be fitted at the rear of the vehicle and at least one on the front. The drill mast shall be operated hydraulically, and shall be fitted with sheaves for at least three (3) cables and one (1) rope. Power winches of not less than 12-ton capacity and with not less than 150 feet of 3/4-inch diameter steel cable shall be mounted on front of the truck. The drill rig must have the rotary capabilities of operating at a forward speed from 0 to 650 rpm. The rotary drive shall have a reverse gear and a maximum drill spindle torque of not less than 7,000 ft./lbs. The vertical drive shall have a stroke of at least 60 inches, downward thrust of not less than 16,000 lbs., and retraction of at least 24,000 lbs. Length of rig from bumper to bumper shall not exceed 24 feet. The drill rig shall also be equipped with a pump capable of pumping bentonite drilling fluid required to keep the holes open and remove cuttings, as well as cementious grout mixes to abandon the borings or wells.

d. DRILL RIG D: Winch-Operated, Skid-Frame-Type Drill with rotary capability and automatic OR cathead-driven safety hammer for conducting SPT’s per ASTM 1586-84. The rig shall be designed for geotechnical split-spoon sampling, rock and concrete coring and drilling in tight quarters or from floating plants. The drill rig shall be capable of being set up on drill platform such as a barge or a pontoon with horizontal set up space as small as 7-feet by 7-feet. Maximum drill rig weight shall not exceed 1,900 pounds.

e. DRILL RIG E: Portable (Hand-Carried) Pipe Driving Winch with automatic hammer OR cathead driven safety hammer for conducting borings up to 50-feet deep including SPT’s per ASTM 1586-84. Rig shall be designed to perform portable geotechnical drilling in tight quarters, wetlands, or from floating plants with horizontal set up space as small as 7- feet by 7-feet.

f. ‘AW’ size and ‘N’ or ‘NW’ size drill rods;

g. Rotary tricone and drag-type drill bits, and split-spoon & split-barrel samplers, to perform 3-inch through 8-inch borings;

h. Flight augers (4-inch through 8-inch), hollow stem augers ("3-1/4", "4-1/4", "6-5/8" I.D.), and iron pipe casing (4-inch through 10-inch);

i. Triple-tube core barrels (NQ-3, HQ-3, and PQ-3) and appropriate bits to include diamond and carbide surfaced as well as bottom and internal discharge. Double-tube core barrel (6" x 7 3/4" or equivalent) and appropriate bits to include diamond and carbide surfaced as well as bottom and internal discharge. HQ Wireline core barrel system with a split-inner tube and appropriate bits to include diamond and carbide surfaced as well as bottom and internal discharge;

j. 3-inch and 5-inch undisturbed thin wall sample tubes;

k. 3-inch and 5-inch Hvorslev type, fixed piston undisturbed samplers and sample tubes;

l. Powdered high yield bentonite, Type I or Type II Portland cement, medium high yield bentonite chips, and barite drilling fluid additive;

m. Mud pumps, grout pumps, auxiliary pumps, tremie pipe, hoses, mud pan or tank, mud mixing apparatus, and water tanks. One water tank must have a minimum size of 300 gallons. The mud pump and/or grout pumps shall have the capacity for, and be designed for, the type of work listed in this STATEMENT OF WORK and in the individual project SCOPE OF WORK included in each task order upon issuance;

n. All hand tools needed to complete subsurface exploration work, routine maintenance, and set-up and cleanup of the drill site;

o. Portable propane torches for winter work and to heat wax for sealing undisturbed samples;

p. Sample inspection table measuring at least 3 feet x 3 feet x 42 inches high with a pipe vise mounted on one end;

q. Bailers suitable for removing water, drilling mud, or sand from boreholes or instruments;

r. Portable steam-cleaner;

s. Precise survey equipment to determine elevations of bore holes and stadia distances, including a transit or level with a tripod and a leveling survey rod. The survey rod shall be legible and read in feet, be graduated in 10ths and 100ths of a foot, and be capable of telescoping, or otherwise accurately extending, to at least 25 feet;

t. Adapters, tools, and related items, which are not specifically listed herein, but are necessary for use with the equipment in achieving the performance requirements set forth in section 1 (GENERAL) shall be furnished or made available for use as required;

2.1 Projects likely to encounter contaminated soils, water, and rock or requiring subsurface samples for chemical analysis may require the following:

a. Level C or D personal protective equipment as defined by OSHA;

b. Containerizing contaminated soils and/or drilling fluids;

c. Decontamination equipment and supplies sufficient to enable all drilling and sampling equipment to be satisfactorily cleaned before the Contractor arrives at the drilling site, and between each sample if such equipment or supplies are deemed necessary in the SCOPE OF WORK for the Task Order.

2.2 The Government will furnish appropriate containers for all soil and rock samples, except undisturbed samples, which will be retained in the sampling tube provided by the Contractor.

3 PROJECT LOCATION

a. This acquisition is divided into two geographic area, the east and west areas of the St. Paul District, shown on the attached map. One contract may be awarded for the entire area (both east and west), or a contract may be awarded for each of the two areas. The work may occur anywhere in the area covered by the specific contract.

4 CONE PENETROMETER TESTS. The following criteria must be met for Cone Penetrometer testing procedure (cone testing will be completed in conjunction with the rental of one of the drill rigs above, the Government has a Core Penetrometer that will be available for use by the contractor):

(a) The CPT test should be conducted in accordance with ASTM D 5778-95, "Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils". If CPTu (Piezocone) tests are being conducted, the cone shall have the pore pressure element location immediately behind the cone tip (u2) with a new saturated filter element prior to each test. The contractor shall provide an operator for the Piezocone (CPTu) system.

(b) Prior to penetration, the cone temperature should be adjusted to the anticipated soil temperature, as reasonably possible.

(c) Routine profiling is to be conducted with a 10-ton capacity cone.

(d) Calibration of the cone will be done in accordance with ASTM D 5778-95, "Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils". There will be a piezometric calibration chamber to test the cone prior to starting a task order and then calibration will be completed every tenth probe hole.

4.1 CPT Data Reporting must fulfill the following requirements:

(a) The data report for the cone penetration tests, as a minimum, shall meet the reporting requirements outlined by ASTM D5778-95, "Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils".

These data must include the raw data taken during penetration.

(b) The graphical data shall be supplied in a format produced by the program DIGITAL CONEPLOT available from ARA/Vertek or Rapid CPT by Dataforensics.

(c) CPT data should be presented in the following units:

Depth - feet Tip resistance (qc) – tons/sq ft (tsf) Sleeve friction (fs) – tsf, Pore Pressure (u2) - psi Inclination – degrees from vertical Temperature – degrees F.

4.2 Graphical (x-y) plots shall be submitted for each cone test with the test report. The format of the plots should be as follows:

(a) CPTU…