W912EF22Q0189.pdf

SEE ADDENDUM

(No Collect Calls)

W912EF22Q0189 25-Aug-2022

b. TELEPHONE NUMBER

509-527-7206

8. OFFER DUE DATE/LOCAL TIME

11:00 AM 08 Sep 2022

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912EF9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

PRESTON E JONES

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

USAED, WALLA WALLA - CONTRACTING DIV.

PRESTON E JONES

201 N. THIRD AVENUE

WALLA WALLA WA 99362-1876

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 960201 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

ARMY CORPS OF ENGINEERS

PERFORMANCE SPECIALIST

DWORSHAK PROJECT OFFICE

1428 NORTHFORK DRIVE

AHSAHKA ID 83520-0048

TEL: FAX:

509-527-7801FAX:

TEL: 509-527-7206 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,250

NAICS:

335313

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF41

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912EF22Q0189

Section SF 1449 - CONTINUATION SHEET

INSTRUCTIONS TO OFFERORS

This is a request for quote for Motor Control Center and Switchboard Upgrade in accordance with the performance work statement for the U.S. Army Corps of Engineers, Walla Walla District, at Dworshak Dam & Dworshak National Fish Hatchery.

TO ENSURE RECEIPT OF YOUR QUOTE, PLEASE SEND TO THE ATTENTION OF PRESTON

JONES AT Preston.E.Jones@usace.army.mil .

Please return all pages of this request for quote. Be sure to also complete Blocks 17a, 30a, 30b, and 30c on page 1.

Name: _____________________________________________________________

Contact Telephone Number: ____________________________________________

Email Address: __________________________________________________________________

Company’s Federal Tax Identification Number: ________________________________________

CAGE CODE: _________________________ SAM UEI Number: ________________________________

Total Amount of Contract: ____________________________

Registration at www.sam.gov is required. Failure to register in the System for Award Management (SAM) database will make an offeror ineligible for award. Effective 29 April 2018, the notarized letter process is now mandatory on all CURRENT registrants at SAM who have a requirement to update data on their SAM record. The notarized letter is mandatory and is required in order for the GSA Federal Service Desk (FSD) to activate the entity's registration.

Both Federal Assistance entities and all non-Federal entities must mail the original, signed copy of the notarized letter to the Federal Service Desk. Failure to do so within 30 days of activation may result in the registration no longer being active. Mail the completed, signed, notarized letter to:

FEDERAL SERVICE DESK

ATTN: SAM.GOV REGISTRATION PROCESSING

460 INDUSTRIAL BLVD

LONDON, KY 40741-7285

UNITED STATES OF AMERICA

Completion of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items and its Alternate 1 is required. An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via https://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at www.sam.gov, the offeror shall complete only paragraphs (b) through (i) of this provision. When you complete your SAM registration, the link to complete your Representations and Certifications is also available. Please do not hesitate to contact Preston Jones, or the SAM website for assistance or have questions.

In accordance with FAR Part 29.3 – State and Local Taxes, and per Title 4 of US Code 104-107, the Government is exempt from paying state and local taxes. Exempt tax identification number 91-0828090.

ADDENDUM TO FAR 52.212-1 INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS

Submission of Price Quote – Offeror shall submit 1 copy of the following:

1. Signed and dated Standard Form 1449 (Solicitation/Contract/Order for Commercial Items)

2. Signed and dated Standard Form 30, if applicable, for any Amendments to the Solicitation

3. Completed schedule (pricing information) for all contract line item numbers

4. Completed FAR 52.212-3 with Alt I, “Offeror Representations and Certifications—Commercial Items” as noted above. An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically via https://www.acquisition.gov. If an offeror has not completed the annual representations and certifications electronically at www.sam.gov, the offeror shall complete only paragraphs

(b) through (i) of this provision

5. Sufficient product information (i.e., brochures, cut sheets, options available and offered, etc.) for the Government to determine whether the offered product meets the salient requirements. Items in the documentation not related to the offer should be crossed or blackened out. A checklist of this specification alone will not be considered a sufficient offer.

PRICES QUOTED MUST BE VALID FOR 30 DAYS.

Solicitation shall result in a firm-fixed-price contract.

All pricings shall include shipping FOB destination (include shipping cost in price).

BUSINESS HOURS: The standard business hours for the Walla Walla District, Corps of Engineers are Monday through Friday from 8:00 a.m. to 4:00 p.m., excluding federal holidays.

BASIS FOR AWARD:

The Government will award one contract resulting from this solicitation in accordance with FAR 13.106 to the responsible offeror meeting or exceeding all solicitation requirements and representing the best value based on price.

BIDDER INQUIRY:

All inquiries regarding this solicitation are to be submitted via Bidder Inquiry. Telephone and email inquiries will not be accepted. Bidder Inquiry is a website that allows bidders to post questions regarding the solicitation and view all questions by other bidders and responses by USACE. Bidder Inquiry can be accessed through ProjNet at (https://www.projnet.org)

To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. A prospective vendor who submits a comment /question will receive an acknowledgement of their comment/question via email. Another email to the same address will notify the prospective vendor once the reply is available for viewing.

TIMING OF BIDDER INQUIRIES: Bidders are encouraged to submit their bidder inquiries promptly. The Government will make every effort to answer all bidder inquiries; however, the closer to the bid or proposal due date an inquiry is received, the less likely it is that a timely response can be provided.

The Bidder Inquiry Key is: H4QSAZ-C8EDVM Specific Instructions for ProjNet Bid Inquiry Access:

1. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen.

2. Identify the Agency. This should be marked as USACE.

3. Key. Enter the Bidder Inquiry Key listed above.

4. Email. Enter the email address you would like to use for communication.

5. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form.

6. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system.

7. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system.

Instructions for Entering Questions:

1. After you are logged in click on the "post new inquiry", it is on the left side of the window under the Word "Submit" a.) This is the window where you will enter your questions b.) Comment Classification: Click on the down arrow to the right of the words “Please select from below”, select “Public” c.) Discipline: This is where you select who this question should be directed to. Example: if the question is about an electrical drawing or specification select: “Electrical” from the pull down list.

d.) Sheet. Enter the sheet number of the drawing you are asking about.

e.) Detail. Enter the detail name of the detail shown on the drawing that you are asking about.

f.) Specification. Enter the Specification number and paragraph number.

g.) File. Use this if you are going to attach a pdf file.

h.) Question. Enter your question here.

Specific Instructions for Future ProjNet Bid Inquiry Access:

1. For future access to ProjNet, you will not be provided any type of password. You will utilize your Secret Question and Secret Answer to log in.

2. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen.

3. Identify the Agency. This should be marked as USACE.

4. Key. Enter the Bidder Inquiry Key listed above.

5. Email. Enter the email address you used to register previously in ProjNet.

6. Click Continue. A page will then open asking you to enter the answer to your Secret Question.

7. Enter your Secret Answer and click Login. Once this is completed you are now logged into the system.

For questions about the ProjNet Bidder Inquiry, please contact the Call Center help desk toll free at 1-800-428- HELP, which operates from 8AM to 5PM (Central US time zone). Bidder inquiry help questions can also be emailed to the helpdesk at staff@projnet.info

TECHNICAL SPECIFICATIONS

DWORSHAK NATIONAL FISH HATCHERY

MOTOR CONTROL CENTER & SWITCHBOARD UPGRADE

TECHNICAL SPECIFICATION

1.0 SCOPE

This specification pertains to the purchase of two new merchandized Square D Model 6 Motor Control Centers (MCCs) and one new merchandized QED-2 Switchboard for Dworshak Project located near Ahsahka, Idaho. The Contractor shall supply, package, and deliver the new Motor Control Centers and Switchboard; he Motor Control Centers and Switchboard will be installed by the Government.

2.0 EQUIPMENT REQUIREMENTS

The Motor Control Centers shall be a Square D (by Schneider Electric) Model 6 Motor Control Center and the Switchboard shall be a Square D (by Schneider Electric) QED-2 Low Voltage Switchboard, per the design specifications. The Contractor shall supply MCCs and Switchboard that match, to the greatest extent possible, the existing MCC and Switchboard footprints and circuit breaker lineup to avoid having to splice existing conductors to extend their length and to include any upgrades or modifications as noted in these specifications (See attached reference drawings for existing lineups). Contractor shall also supply a Square D Circuit Breaker Test Set for testing circuit breakers located in QED-2 Low Voltage Switchboard and Circuit Breaker Picking Device Attachment as specified in section 2.1.3 Circuit Breaker Requirements.

2.1 GENERAL REQUIREMENTS

Equipment provided under this contract shall meet the following salient requirements:

2.1.1 Model 6 Motor Control Center ESQ1

Physical Requirements o Unused vertical space within the MCC lineup shall utilize 6” Blank Covers. In circumstances where a

6” Blank Cover cannot be utilized a 3” Blank Cover or combination of a 6” and 3” blank cover shall be used in conjunction.

o Enclosure shall be a NEMA Type 1A, Top-fed, 20” Deep General Purpose o All components, including Buckets, Circuit Breakers, Transformers, Control Power Transformers, Distribution Panelboards, and Motor Starters shall be new and unused and shall be manufactured by Square D for use in Model 6 MCCs o All Buckets, including Circuit Breakers, Contactors, and Motor Starters shall be draw-out style.

o Shall include any necessary hardware and special tools for performing installation.

o Shall include Wire Tie Retainers in vertical wireway and Rodent Barriers.

o Shall include engraved Master Nameplate for MCC and engraved Nameplates for each individual bucket. Nameplates shall be black surface, white letters, and stainless-steel nameplate screws. Once the submitted design package is approved by the government, the government will provide designations for each nameplate.

o Shall be suitable for the Seismic Category of Clearwater County, Idaho, which is category B.

o Shall meet the requirements of UL, where UL standards are established for those items.

Electrical Requirements o System voltage is 480 VAC, 3 Phase, 3 Wire, 60 Hz o 800A minimum rated Horizontal Bus constructed of copper o Shall include an appropriately rated Vertical Bus constructed of copper o Shall include an appropriately rated continuous-ground bus of tin-plated copper at the bottom of all

MCC sections.

o All Electrical Components: Designed for a Max Available Fault Current (RMS) of 65 kA o Wiring shall be NEMA Type 1B o All Control and Annunciation Circuits shall be designed for 125VDC o Shall meet the requirements of NFPA 70, where NFPA 70 standards are established for those items.

Circuit Breaker Requirements o Shall include a minimum of one alarm contact for remote annunciation for when breaker trips o Shall include a means for locking out the device for Hazardous Energy Control o Where ratings allow, circuit breakers shall occupy a 6-inch vertical section of MCC o Shall be provided with draw-out bucket o Circuit breakers shall include means of being locked out for Hazardous Energy control o This MCC includes two Main Feeder Circuit Breakers with one circuit breaker rated at 600A and the other rated at 150A. The following additional requirements apply for those circuit breakers:

These circuit breakers shall be electrically interlocked to prevent them from being closed simultaneously.

The main circuit breakers shall be capable of being electronically operated for open/close functionality.

Circuit Breakers shall include Micrologic 6.0P Trip Unit with LSIG overcurrent protection Circuit Breakers shall include auxiliary A/B contacts for control wiring Circuit Breakers shall have capabilities of being shunt tripped Circuit breakers shall be supplied lugs shall be capable of accepting a minimum of two parallel

350MCM cables per phase and neutral on the line side of the circuit breaker.

Lineup o 600A, 480VAC, 3 Pole Main Feeder Circuit Breaker from Powerhouse Diesel o 150A, 480VAC, 3 Pole Main Feeder Circuit Breaker from Dam Diesel o 50A, 480VAC, 3 Pole Branch Circuit Breaker - CQ05 (Existing Bucket 1A) o 100A, 480VAC, 3 Pole Branch Circuit Breaker - CQ01 (Existing Bucket 2A) o 30A, 480VAC, 3 Pole Branch Circuit Breaker - Governor Air Compressor #3 (Existing Bucket 1B) o 100A, 480VAC, 3 Pole Branch Circuit Breaker - SU1 (Existing Bucket 2B) o 50A, 480VAC, 3 Pole Branch Circuit Breaker - SU2 (Existing Spare Bucket 1C, this is a new breaker in this lineup) o 250A, 480VAC, 3 Pole Branch Circuit Breaker - SU3 (Existing Bucket 2C, this breaker has been upsized from the original lineup) o 150A, 480VAC, 3 Pole Branch Circuit Breaker - Batter Charger #1 (Existing Bucket 1D) o 175A, 480VAC, 3 Pole Branch Circuit Breaker - Skeleton Bay Pump #4 (Existing Bucket 1E)

2.1.2 Model 6 Motor Control Center GCQ2

System Information o This Motor Control Center operates as a manual transfer switch for multiple loads.

o It is comprised of circuit breaker pairs, one used to supply power to a load from a normal source, and one used to supply power from the emergency source.

The Emergency Source supply breaker is fed from the vertical bus work of the MCC.

The Normal Source supply breaker does not stab into the vertical bus, rather both the line and load sides of the breaker are equipped with lugs. The line side of the breaker is fed via cable from another source.

The Normal and Emergency source supply breakers (and disconnecting means, in the case of motor starters) shall be mechanically interlocked to prevent both from being closed in at the same time.

o Footprint: Existing MCC is 48" W x 90" H x 30" D; new MCC shall be similar in size as the original MCC because of space restrictions.

o Unused vertical space within the MCC lineup shall utilize 6” Blank Covers. In circumstances where a 6” Blank Cover cannot be utilized a 3” Blank Cover or combination of a 6” and 3” blank covers shall be used.

o Enclosure shall be a NEMA Type 1A, Top-fed, 20” Deep General Purpose o All components, including Buckets, Circuit Breakers, Transformers, Control Power Transformers, Distribution panelboards, and Motor Starters shall be new and unused and shall be manufactured by Square D for use in Model 6 MCCs o All buckets, including circuit breakers, contactors, and motor starters shall be draw-out style.

o Shall include any necessary hardware and special tools for performing installation.

o Shall include wire tie retainers in vertical wireway and rodent barriers.

o Shall include engraved master nameplate for MCC and engraved nameplates for each individual bucket. Nameplates shall be black surface, white letters, and stainless-steel nameplate screws. Once the submitted design package is approved by the government, the government will provide designations for each nameplate.

o System voltage is 480VAC, 3 Phase, 3 Wire, 60 Hz o Shall be 800A minimum rated Horizontal Bus constructed of copper o Shall be equipped with an appropriately rated Vertical Bus constructed of copper o Shall include an appropriately rated continuous-ground bus of tin-plated copper at the bottom of all

MCC sections.

o All Electrical Components: Designed for a Max Available Fault Current (RMS) of 65 kA o Wiring shall be NEMA Type 1B o All Control and Annunciation Circuits shall be designed for 120VAC power o Shall include a minimum of one alarm contact for remote annunciation for when breaker trips o Shall include a means for locking out the device for Hazardous Energy Control

Motor Starter Package Requirements o Shall include an appropriately rated circuit breaker o 480:120VAC control power transformer with a minimum 150VA rating o Appropriately sized fuses for the control power transformer and any other current-limited devices o Motor overload protection device o Hand-Off-Auto (HOA) selector switch o “Motor Off” green LED pilot light with push-to-test feature o “Motor On” red LED pilot light with push-to-test feature o Minimum two additional “normally open” and two “normally closed” auxiliary contacts for control wiring o Additional four terminal blocks for field wiring

Lineup (See attached drawing for suggested lineup configuration of this MCC.)

o Emergency Loads (All stab into vertical bus):

800A, 480VAC, 3 Pole Circuit Breaker (HCQ6 Feeder) - Emergency Generator Feed NEMA Size 2 FVNR Motor Starter with motor circuit protector disconnects for 15 HP motor -

Incubation Pump #1 Emergency Feed NEMA Size 1 FVNR Motor Starter with motor circuit protector disconnects for 5 HP motor -

Generator Remote Radiator Fan Emergency Feed NEMA Size 2 FVNR Motor Starter with motor circuit protector disconnects for 15 HP motor -

Reuse Water Pump #5 Emergency Feed NEMA Size 2 FVNR Motor Starter with motor circuit protector disconnects for 15 HP motor -

Exhaust Fan Emergency Feed 5kVA Transformer, 480:120/240VAC, 1 Phase o Normal Loads (All compartments shall be isolated from vertical bus and breakers shall be equipped with lugs on the line and load side):

800A, 480VAC, 3 Pole Circuit Breaker - HCQ6 Normal Feed 150A, 480VAC, 3 Pole Circuit Breaker - Incubation Pump #1 Normal Feed 150A, 480VAC, 3 Pole Circuit Breaker - Generator Remote Radiator Fan Normal Feed 150A, 480VAC, 3 Pole Circuit Breaker - Reuse Water Pump #5 Normal Feed 150A, 480VAC, 3 Pole Circuit Breaker - Exhaust Fan Normal Feed o 100A, 120/240VAC, 1 Phase, 65kA AIC, 18 Circuit Panelboard, Copper Ground Bus and Copper 100% Rated Neutral Bus Main Circuit Breaker - 100A, 2 Pole, 65kA AIC, Bolt-on Style, rated to accept copper or aluminum conductors, Equipped with Padlocking device for hazardous energy control – Qty 1 Branch Circuit Breakers – 15A, 1 pole, 65kA AIC, Bolt-on Style, Rated to accept copper or aluminum conductors, Equipped with padlocking device for hazardous energy control – Qty 6 Branch Circuit Breakers – 20A, 1 pole, 65kA AIC, Bolt-on Style, Rated to accept copper or aluminum conductors, Equipped with padlocking device for hazardous energy control – Qty 6

Branch Circuit Breakers – 30A, 2 pole, 65kA AIC, Bolt-on Style, Rated to accept copper or aluminum conductors, Equipped with padlocking device for hazardous energy control – Qty 2

2.1.3 QED-2 Switchboard GCQ3

o Footprint: Existing Switchboard is 52" W x 90" H x 40" D; new switchboard shall match the footprint of the original switchboard to cover cable trough below unit and to mate to adjacent equipment.

o Enclosure shall be NEMA Type 1A, bottom-fed o All components used in the construction of this switchboard shall be new and unused.

o Shall include any necessary hardware and special tools for performing installation.

o Shall include wire tie retainers in vertical wireway.

o Shall include engraved master nameplate for MCC and engraved nameplates for each individual bucket. Nameplates shall be black surface, white letters, and stainless-steel nameplate screws. Once the submitted design package is approved by the government, the government will provide designations for each nameplate.

o System voltage is 480/277 VAC, 3 Phase, 4 Wire, 60 Hz o Shall include appropriately rated copper bus o Shall include 100% rated neutral bus constructed of copper o Shall include an appropriately rated continuous-ground bus of tin-plated copper at the bottom of section of switchboard o All Electrical Components: Designed for a Max Available Fault Current (RMS) of 65 kA o Shall include wiring NEMA Type 1B o All Control and Annunciation Circuits shall be designed for 120VAC power o Circuit Breakers shall be Square D Masterpact NW Draw Out Style Circuit Breakers to match existing inventory of Square D style breakers.

o Circuit Breaker shall be equipped with Micrologic 6.0P Trip Units.

o Circuit Breakers shall be sized appropriately to include appropriately sized frame and rating Plug o Circuit breaker shall be equipped with the following features:

Auxiliary switches 4A-4B Ready-to-Close 1A/1B from C Contact (PF) Undervoltage relay with adjustable Time Delay 120VAC Spring charging Motor Control wiring shall be designed for 120VAC Electronically controlled for Open/Close Overcurrent trip annunciation contacts Means of being locked out for Hazardous Energy control o Accessories:

Shall include a Circuit Breaker Test Set with Product Number: LV485500 for testing Masterpact

NW Style Circuit Breakers. Test Set shall include all accessories to allow for full functionality of Test Set to include Software, Licenses, Service Interface Kit/Case, Service Interface Module, Power Supplies, Communication Cables, and auxiliary connectors.

Shall include a picking device attachment for draw out style Masterpact NW Circuit Breakers.

Note, to be used with government’s pre-existing hoist equipment.

Lineup o 1200AF/700AT, 480VAC, 3 Pole Masterpact NW Style Circuit Breaker – GCQ3 Dire Emergency Feeder Breaker – Quantity 1 o 1200AF/1000AT, 480VAC, 3 Pole Masterpact NW Style Circuit Breaker – HCQ10 Emergency & Subfeed Breaker – Quantity 1 o 800AF/600AT, 480VAC, 3 Pole Masterpact NW Style Circuit Breaker - HSQ2-GCQ3 Tie Breaker – Quantity 1

3.0 SUBMITTALS

3.1 PRE-AWARD SUBMITTALS

Sufficient product information (i.e., brochures, cut sheets, options available and offered, etc.) for the Government to determine whether the offered product meets the salient requirements. Items in the documentation not related to the offer should be crossed or blackened out. A checklist of this specification alone will not be considered a sufficient offer.

3.2 POST-AWARD SUBMITTALS

Within 14 calendar days from contract award, the Contractor shall provide a design package to include design drawings and product data of the MCC, Switchboard, and auxiliary equipment/devices for government review to verify it meets the salient requirements prior to submitting order of equipment to the factory.

3.3 FINAL DELIVERY SUBMITTALS

At or before delivery, the Contractor shall provide the following for each product provided:

Operations & Maintenance Manual (Electronic version preferred) Final Manufacture’s Drawings Installation Guide Product Data Complete Warranty Information

4.0 SHIPMENT AND DELIVERY

Deliveries shall be coordinated with the Government at least fourteen calendar days in advance. All items shall be delivered FOB Destination to Dworshak Powerhouse no later than December 22, 2022. The Contractor shall be responsible for packing and shipping the components in a manner that will ensure undamaged and complete arrival to Dworshak Project. Delivery shall be made during Dworshak Project Normal Operating Hours, Monday through Thursday, 7:30 a.m. – 4:30 p.m. (Pacific), excluding federal holidays.

Delivery shall be to:

USACE Dworshak Powerhouse Attn: Contract Performance Specialist 1428 Northfork Drive Ahsahka, ID 83520

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each Model 6 Motor Control Center ESQ1

FFP

In accordance with the Technical Specifications.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

PN/CN: ESQ1

PSC CD: 6110

NET AMT

0002 1 Each Model 6 Motor Control Center GCQ2

FFP

In accordance with the Technical Specifications.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

PN/CN: CGQ2

PSC CD: 6110

0003 1 Each QED-2 Switchboard GCQ3

FFP

In accordance with the Technical Specifications.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

PN/CN: GCQ3

PSC CD: 5930

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A Destination Government 0002 N/A N/A Destination Government 0003 N/A N/A Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 22-DEC-2022 1 ARMY CORPS OF ENGINEERS

PERFORMANCE SPECIALIST

DWORSHAK PROJECT OFFICE

1428 NORTHFORK DRIVE

AHSAHKA ID 83520-0048

FOB: Destination

960201

0002 22-DEC-2022 1 (SAME AS PREVIOUS LOCATION)

0003 22-DEC-2022 1 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.203-11 Certification And Disclosure Regarding Payments To

Influence Certain Federal Transactions

SEP 2007

52.203-12 Limitation On Payments To Influence Certain Federal Transactions

JUN 2020

52.204-7 System for Award Management OCT 2018 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-21 Basic Safeguarding of Covered Contractor Information

Systems

NOV 2021

52.212-1 Instructions to Offerors--Commercial Products and Commercial Services

NOV 2021

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2021

52.222-22 Previous Contracts And Compliance Reports FEB 1999 52.222-25 Affirmative Action Compliance APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

NOV 2021

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2021

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.204-7020 NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.204-7022 Expediting Contract Closeout MAY 2021 252.211-7003 Item Unique Identification and Valuation MAR 2022 252.213-7000 Notice to Prospective Suppliers on Use of Supplier

Performance Risk System in Past Performance Evaluations

SEP 2019

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7000 Buy American--Balance Of Payments Program Certificate--

Basic (Nov 2014)

NOV 2014

252.225-7001 Buy American And Balance Of Payments Program-- Basic JUN 2022

252.225-7048 Export-Controlled Items JUN 2013 252.225-7050 Disclosure of Ownership or Control by the Government of a

Country that is a State Sponsor of Terrorism

SEP 2021

252.225-7055 Representation Regarding Business Operations with the Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

MAY 2022

252.227-7015 Technical Data--Commercial Items FEB 2014 252.227-7037 Validation of Restrictive Markings on Technical Data APR 2022 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.232-7017 Accelerating Payments to Small Business Subcontractors--

Prohibition on Fees and Consideration

APR 2020

252.244-7000 Subcontracts for Commercial Items JAN 2021 252.246-7003 Notification of Potential Safety Issues JUN 2013 252.246-7008 Sources of Electronic Parts MAY 2018

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT

2020)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representations.

(1) The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAY 2022) ALTERNATE I (OCT 2014)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision--

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business concern"—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern"—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1002," means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

"Veteran-owned small business concern" means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business…