Revised_1442.pdf

SOLICITATION

Request for Proposals

Solicitation No. W912DW-17-R-0021

“Single Award Task Order Contract (SATOC) for Multi-Disciplinary Maintenance, Repair, Minor Construction and Incidental Design Work on Real Property for Yakima Training Center (YTC), Washington (WA), Idaho (ID), Montana (MT) and Oregon (OR) states.”

Competitive 8(a)

August 2017

U.S. Army Corps of Engineers Seattle District

“Single Award Task Order Contract (SATOC) for Multi-Disciplinary Maintenance, Repair, Minor Construction and Incidental Design Work on Real Property for Yakima Training Center (YTC), Washington (WA), Idaho (ID), Montana (MT) AND Oregon (OR) states.”

Competitive 8(a)

PROJECT TABLE OF CONTENTS

PROCUREMENT AND CONTRACTING REQUIREMENTS GROUP

(Division 00)

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

00 10 00 SOLICITATION/CONTRACT FORM (SF 1442 AND CONTRACT LINE

ITEMS) – INCLUDING:

- AUTHORITY TO BIND

- ALTERATIONS TO CONTRACT

- INDIRECT COST FACTOR (ICF) SCHEDULE

00 21 00 INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

00 24 00 PROPOSAL SUBMISSION AND EVALUATION

- ENCLOSURE 1: PAST PERFORMANCE QUESTIONNAIRE (PPQ)

FORM

00 45 00 REPRESENTATIONS AND CERTIFICATIONS

- ENCLOSURE 1: PRE-AWARD INFORMATION

00 72 00 CONTRACT CLAUSES

01 73 00 SPECIAL CONTRACT REQUIREMENTS (SUPPLEMENTARY CONDITIONS)

- ENCLOSURE 1: PROFIT, ALTERNATE STRUCTURED APPROACH

- ENCLOSURE 2: CERTIFICATE OF CURRENT COST OR PRICING

DATA

- ENCLOSURE 3: WAGE RATE INDEX

SPECIFICATIONS

VOLUME 1

Specifications

DIVISION 1 – GENERAL REQUIREMENTS

01 22 00.00 10 MEASUREMENT AND PAYMENT

01 30 00 ADMINISTRATIVE REQUIREMENTS

01 32 01.00 10 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 35 29.13 HEALTH, SAFETY, AND EMERGENCY RESPONSE PROCEDURES FOR

CONTAMINATED SITES

01 35 45.00 10 CHEMICAL DATA QUALITY CONTROL

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 45 00.10 QCS

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 20.00 10 ENVIRONMENTAL PROTECTION

01 57 23 TEMPORARY STORMWATER POLLUTION CONTROL

01 62 35 RECYCLED/RECOVERED MATERIALS

01 74 19 CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT

01 78 00 CLOSEOUT SUBMITTALS

01 78 23 OPERATION AND MAINTENANCE DATA

01001 SUPPLEMENTARY REQUIREMENTS

01005 SITE SPECIFIC SUPPLEMENTARY REQUIREMENTS

CONTRACTOR AND VENDOR PASS

DIVISION 02 - EXISTING CONDITIONS

02 41 00 DEMOLITION

02 42 91 REMOVAL AND SALVAGE OF HISTORIC BUILDING MATERIALS

02 61 13 EXCAVATION AND HANDLING OF CONTAMINATED MATERIALS

02 61 23 REMOVAL AND DISPOSAL OF PCB CONTAMINATED SOILS

02 81 00 TRANSPORTATION AND DISPOSAL OF HAZARDOUS MATERIALS

02 82 13.00 10 ASBESTOS ABATEMENT

02 83 13.00 20 LEAD IN CONSTRUCTION

02 83 19.00 10 LEAD BASED PAINT HAZARD ABATEMENT, TARGET HOUSING AND CHILD

OCCUPIED FACILITIES

02 84 16 HANDLING OF LIGHTING BALLASTS AND LAMPS CONTAINING PCBS AND

MERCURY

02 84 33 REMOVAL AND DISPOSAL OF POLYCHLORINATED BIPHENYLS (PCBS)

DIVISION 3 - CONCRETE

03 01 30 RESTORATION OF CONCRETE IN HISTORIC STRUCTURES

03 11 13.00 10 STRUCTURAL CONCRETE FORMWORK

03 20 00.00 10 CONCRETE REINFORCING

03 30 00 CAST-IN-PLACE CONCRETE

03 30 53 MISCELLANEOUS CAST-IN-PLACE CONCRETE

03 40 00.00 10 PLANT PRECAST CONCRETE PRODUCTS FOR BELOW GRADE CONSTRUCTION

DIVISION 4 - MASONRY

04 01 20.70 UNIT MASONRY CLEANING AND RESTORATION

DIVISION 5 - METALS

05 05 23.16 STRUCTURAL WELDING

05 12 00 STRUCTURAL STEEL

05 21 00 STEEL JOIST FRAMING

05 30 00 STEEL DECKS

05 40 00 COLD-FORMED METAL FRAMING

05 50 13 MISCELLANEOUS METAL FABRICATIONS

05 51 00 METAL STAIRS

05 51 33 METAL LADDERS

05 52 00 METAL RAILINGS

05 72 00 DECORATIVE METAL SPECIALTIES

DIVISION 6 – WOOD, PLASTICS, AND COMPOSITES

06 10 00 ROUGH CARPENTRY

06 18 00 GLUED-LAMINATED CONSTRUCTION

06 20 00 FINISH CARPENTRY

06 61 16 SOLID POLYMER (SOLID SURFACING) FABRICATIONS

DIVISION 7 – THERMAL AND MOISTURE PROTECTION

07 11 13 BITUMINOUS DAMPPROOFING

07 12 00 BUILT-UP BITUMINOUS WATERPROOFING

07 13 53 ELASTOMERIC SHEET WATERPROOFING

07 22 00 ROOF AND DECK INSULATION

07 24 00 EXTERIOR INSULATION AND FINISH SYSTEMS

07 31 13 ASPHALT SHINGLES

07 32 13 ROOF TILES

07 32 14 CLAY TILE ROOFING REPLACEMENT OR REPAIR

07 41 13 METAL ROOF PANELS

07 41 63 FABRICATED ROOF PANEL ASSEMBLIES

07 42 13 METAL WALL PANELS

07 51 13 BUILT-UP ASPHALT ROOFING

07 52 00 MODIFIED BITUMINOUS MEMBRANE ROOFING

07 53 23 ETHYLENE-PROPYLENE-DIENE-MONOMER ROOFING

07 60 00 FLASHING AND SHEET METAL

07 61 14.00 20 STEEL STANDING SEAM ROOFING

07 61 15.00 20 ALUMINUM STANDING SEAM ROOFING

07 81 00 SPRAY-APPLIED FIREPROOFING

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 8 - OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 14 00 WOOD DOORS

08 32 13 ALUMINUM SLIDING GLASS DOORS

08 33 13 METAL ROLLING COUNTER DOORS

08 33 23 OVERHEAD COILING DOORS

08 36 13 SECTIONAL OVERHEAD DOORS

08 51 13 ALUMINUM WINDOWS

08 51 23 STEEL WINDOWS

08 52 00 WOOD WINDOWS

08 52 70 WOOD WINDOWS – REPAIR AND REHABILITATION

08 53 00 PLASTIC WINDOWS

08 56 53 BLAST RESISTANT TEMPERED GLASS WINDOWS

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

08 91 00 METAL WALL AND DOOR LOUVERS

DIVISION 9 - FINISHES

09 06 90 COLOR SCHEDULE

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 22 36 LATH

09 23 00 GYPSUM PLASTERING

09 23 82 FIREPROOF GYPSUM PLASTERING

09 24 23 STUCCO

09 26 00 VENEER PLASTER

09 29 00 GYPSUM BOARD

09 30 00 CERAMIC TILE, QUARRY TILE, AND PAVER TILE

09 51 00 ACOUSTICAL CEILINGS

09 65 00 RESILIENT FLOORING

09 68 00 CARPET

09 90 00 PAINTS AND COATINGS

09 97 30 PREPARATION OF HISTORIC WOOD AND METAL SURFACES FOR PAINTING

DIVISION 10 - SPECIALTIES

10 10 00 VISUAL COMMUNICATIONS SPECIALTIES

10 14 01 EXTERIOR SIGNAGE

10 14 02 INTERIOR SIGNAGE

10 21 13 TOILET COMPARTMENTS

10 22 26.13 ACCORDION FOLDING PARTITIONS

10 26 13 WALL AND CORNER GUARDS

10 28 13 TOILET ACCESSORIES

DIVISION 11 - EQUIPMENT

11 31 13 ELECTRIC KITCHEN EQUIPMENT

DIVISION 12 - FURNISHINGS

12 21 00 WINDOW BLINDS

12 22 00 CURTAINS AND DRAPES

12 24 13 ROLLER WINDOW SHADES

12 31 00 MANUFACTURED METAL CASEWORK

12 32 00 MANUFACTURED WOOD CASEWORK

12 34 00 MANUFACTURED PLASTIC CASEWORK

12 50 00 FURNITURE SYSTEMS

DIVISION 13 – SPECIAL CONSTRUCTION

13 34 19 METAL BUILDING SYSTEMS

13 48 00.00 10 SEISMIC PROTECTION FOR MECHANICAL EQUIPMENT

13 48 00 SEISMIC PROTECTION FOR MISCELLANEOUS EQUIPMENT

VOLUME 2

DIVISION 14 – CONVEYING EQUIPMENT

14 24 00 HYDRAULIC ELEVATORS

DIVISION 21 – FIRE SUPPRESSION

21 13 13.00 10 WET PIPE SPRINKLER SYSTEM, FIRE PROTECTION

21 13 17.00 10 DRY PIPE SPRINKLER SYSTEM, FIRE PROTECTION

21 13 18.00 10 PREACTION AND DELUGE SPRINKLER SYSTEMS, FIRE PROTECTION

21 13 24.00 10 AQUEOUS FILM-FORMING FOAM (AFFF) FIRE PROTECTION SYSTEM

21 21 03.00 10 WET CHEMICAL FIRE EXTINGUISHING FOR KITCHEN CABINET

21 30 00 FIRE PUMPS

DIVISION 22 – PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

DIVISION 23 – HEATING, VENTILATING, AND AIR CONDITIONING

23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS

23 03 00.00 20 BASIC MECHANICAL MATERIALS AND METHODS

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 08 00.00 10 COMMISSIONING OF HVAC SYSTEMS

23 09 23 DIRECT DIGITAL CONTROL FOR HVAC AND OTHER LOCAL BUILDING

SYSTEMS

23 11 23.00 10 GAS PIPING SYSTEM

23 23 00 REFRIGERANT PIPING

23 35 00.00 10 OVERHEAD VEHICLE TAILPIPE AND WELDING FUME EXHAUST REMOVAL

SYSTEM(S)

23 52 00 HEATING BOILERS

23 54 16.00 10 HEATING SYSTEM, GAS-FIRED HEATERS

23 57 10.00 10 FORCED HOT WATER HEATING SYSTEMS USING WATER AND STEAM HEAT

EXCHANGERS

23 64 26 CHILLED, CHILLED-HOT, AND CONDENSER WATER PIPING SYSTEMS

23 65 00 COOLING TOWERS

23 70 03.00 10 HEATING AND UTILITIES SYSTEMS, CENTRAL STEAM

23 82 01.00 10 WARM AIR HEATING SYSTEMS

23 82 02.00 10 UNITARY HEATING AND COOLING EQUIPMENT

23 83 00.00 20 ELECTRIC SPACE HEATING EQUIPMENT

DIVISION 26 – ELECTRICAL

26 00 00.00 20 BASIC ELECTRICAL MATERIALS AND METHODS

26 05 48.00 10 SEISMIC PROTECTION FOR ELECTRICAL EQUIPMENT

26 08 00 APPARATUS INSPECTION AND TESTING

26 12 19.10 THREE-PHASE PAD-MOUNTED TRANSFORMERS

26 13 00 PAD MOUNTED SWITCHGEAR

26 20 00 INTERIOR DISTRIBUTION SYSTEM

26 28 01.00 10 COORDINATED POWER SYSTEM PROTECTION

26 29 23 VARIABLE FREQUENCY DRIVE SYSTEMS UNDER 600 VOLTS

26 32 14.00 10 DIESEL-GENERATOR SET, STATIONARY 15-300 KW, STANDBY APPLICATIONS

26 36 00.00 10 AUTOMATIC TRANSFER SWITCH AND BY-PASS/ISOLATION SWITCH

26 41 01.00 10 LIGHTNING PROTECTION SYSTEM

26 42 14.00 10 CATHODIC PROTECTION SYSTEM (SACRIFICIAL ANODE)

26 42 17.00 10 CATHODIC PROTECTION SYSTEM (IMPRESSED CURRENT)

26 51 00 INTERIOR LIGHTING

26 56 00 EXTERIOR LIGHTING

DIVISION 27 – COMMUNICATIONS

27 10 00 BUILDING TELECOMMUNICATIONS CABLING SYSTEM

27 51 16 RADIO AND PUBLIC ADDRESS SYSTEMS

DIVISION 28 – ELECTRONIC SAFETY AND SECURITY

28 16 01.00 10 SMALL INTRUSION DETECTION SYSTEM

28 31 33.00 10 FIRE ALARM REPORTING SYSTEM, RADIO TYPE

28 31 64.00 10 FIRE DETECTION AND ALARM SYSTEM, ADDRESSABLE

28 31 76 INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM

DIVISION 31 – EARTHWORK

31 00 00 EARTHWORK

31 11 00 CLEARING AND GRUBBING

31 23 00.00 20 EXCAVATION AND FILL

DIVISION 32 – EXTERIOR IMPROVEMENTS

32 01 13 BITUMINOUS SEAL AND FOG COATS

32 05 33 LANDSCAPE ESTABLISHMENT

32 10 00 PERVIOUS BITUMINOUS CONCRETE PAVEMENT

32 11 16.16 BASE COURSE FOR RIGID AND SUBBASE COURSE FOR FLEXIBLE PAVING

32 11 24 GRADED CRUSHED AGGREGATE BASE COURSE FOR FLEXIBLE PAVEMENT

32 12 10 BITUMINOUS TACK AND PRIME COATS

32 12 11 BITUMINOUS SURFACE TREATMENT

32 12 16 HOT-MIX ASPHALT (HMA) FOR ROADS

32 12 21 BITUMINOUS ROAD-MIX SURFACE COURSE

32 12 22.00 10 POLYMER CONCRETE-MICRO-OVERLAY (PCMO) FOR FUEL AND ABRASION

RESISTANT WEARING SURFACES

32 15 00 AGGREGATE SURFACE COURSE

32 16 13 CONCRETE SIDEWALKS AND CURBS AND GUTTERS

32 17 24.00 10 PAVEMENT MARKINGS

32 31 13.53 HIGH-SECURITY CHAIN LINK FENCES AND GATES

32 31 13 CHAIN LINK FENCES AND GATES

32 31 26 WIRE FENCES AND GATES

32 84 24 IRRIGATION SPRINKLER SYSTEMS

32 92 19 SEEDING

32 92 23 SODDING

32 93 00 EXTERIOR PLANTS

DIVISION 33 – UTILITIES

33 08 55 COMMISSIONING OF FUEL FACILITY SYSTEMS

33 11 00 WATER DISTRIBUTION

33 30 00 SANITARY SEWERS

33 34 00 FORCE MAINS AND INVERTED SIPHONS; SEWER

33 40 00 STORM DRAINAGE UTILITIES

33 51 03.00 10 GAS DISTRIBUTION SYSTEM

33 56 10 FACTORY-FABRICATED FUEL STORAGE TANKS

33 58 00 LEAK DETECTION FOR FUELING SYSTEMS

33 60 01 VALVES, PIPING, AND EQUIPMENT IN VALVE MANHOLES

33 60 02 ABOVEGROUND HEAT DISTRIBUTION SYSTEM

33 61 00 PREFABRICATED UNDERGROUND HEATING/COOLING DISTRIBUTION SYSTEM

33 61 13 PRE-ENGINEERED UNDERGROUND HEAT DISTRIBUTION SYSTEM

33 61 15 HEAT DISTRIBUTION SYSTEMS IN CONCRETE TRENCHES

33 70 02.00 10 ELECTRICAL DISTRIBUTION SYSTEM, UNDERGROUND

33 71 01 OVERHEAD TRANSMISSION AND DISTRIBUTION

33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION

33 82 00 TELECOMMUNICATIONS OUTSIDE PLANT (OSP)

ATTACHMENT A SEED PROJECT (Under Separate Cover)

-- End of Project Table of Contents –

W68MD961541954

Contractor shall furnish all plant, labor, tools, equipment and materials to perform all w ork ordered under this competitive Indefinite-Delivery, Indefinite-Quantity (IDIQ) Contract for Mutli-Disciplinary Maintenance, Repair, Minor Construction and Incidental Design Work for Yakima Training Center (YTC) and other locations in WA and Sub-Installations in the States of Idaho, Montana and Oregon. All w ork performed under this contract shall be performed in strict accordance w ith the attached Contract Clauses, Special Contract Requirement and Technical Specifications.

Competitive 8(a)

SHELIA A WELSH 253-967-4823

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

10-Aug-2017

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

X

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________ calendar days after receiving aw ard, notice to proceed. This performance period is X mandatory, negotiable. (See _________________________Sec 00 73 00

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________3 copies to perform the w ork required are due at the place specified in Item 8 by ___________ local time ______________11 Sep 2017 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______90 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

USA ENGINEER DISTRICT, SEATTLE

ATTN: CECT-NWS

4735 EAST MARGINAL WAY SOUTH, BLDG. 1202

SEATTLE WA 98134-2388

W912DW

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

01:00 PM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

FAX:TEL: TEL: FAX:

W912DW-17-R-0021 108

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

Section 00 10 00 - Solicitation/Contract Form

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job

Base Option Period 8(a) Single Award Task Order Contract (SATOC) for Multi-Disciplinary Maintenance, Repair, Minor Construction and Incidental Design Work on Real Property for Yakima Training Center (YTC), WA, Idaho, Montana and Oregon States".

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

1001 1 Job

1st Option Period 8(a) Single Award Task Order Contract (SATOC) for Multi-Disciplinary Maintenance, Repair, Minor Construction and Incidental Design Work on Real Property for Yakima Training Center (YTC), WA, Idaho, Montana and Oregon States".

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

1002 1 Job

2nd Option Period 8(a) Single Award Task Order Contract (SATOC) for Multi-Disciplinary Maintenance, Repair, Minor Construction and Incidental Design Work on Real Property for Yakima Training Center (YTC), WA, Idaho, Montana and Oregon States".

INDIRECT COST FACTOR (ICF) SCHEDULE

Single Award Task Order Contract (SATOC) for Multi-Disciplinary Maintenance, Repair and Minor Construction Work in Support of Joint Base Lewis-McChord (JBLM) Public Works and Other Customers Supported by the Seattle District Corps of Engineers

As stated in Paragraph 4, CONTRACTOR'S PRICING, of SECTION 01 1 1 00, STATEMENT OF WORK (SOW): The Contractor’s pricing for this Contract shall consist of the Contractor's Indirect Cost Factors (ICFs) as listed in this Indirect Cost Factor Schedule. The Contractor's ICFs will be a percentage increase, to be applied to the total of all direct costs. For example, if the ICF is intended to increase the sum of the direct costs by twenty percent (20%), the ICF in the Bid Schedule is stated as 120%.

ITEM NO. ITEM DESCRIPTION CONTRACTOR’S

INDIRECT COST

FACTOR (ICF)

BASE YEAR PERIOD OF CONTRACT

(estimated 40% of total $25M capacity)

0001 All work in Eastern Washington (est 90%) ___________%

0002 All work in Western Washington (est 9%) ___________%

0003 All work in Oregon (est 0.33%) ___________%

0004 All work in Idaho (est 0.33%) ___________%

0005 All work in Montana (est 0.33%) ___________%

ITEM NO. ITEM DESCRIPTION CONTRACTOR’S

INDIRECT COST

FACTOR (ICF)

FIRST OPTION PERIOD OF CONTRACT

(estimated 30% of total $25M capacity)

0006 All work in Eastern Washington (est 90%) ___________%

0007 All work in Western Washington (est 9%) ___________%

0008 All work in Oregon (est 0.33%) ___________%

0009 All work in Idaho (est 0.33%) ___________%

0010 All work in Montana (est 0.33%) ___________%

ITEM NO. ITEM DESCRIPTION CONTRACTOR’S

INDIRECT COST

FACTOR (ICF)

SECOND OPTION PERIOD OF

CONTRACT

(estimated 30% of total $25M capacity)

0011 All work in Eastern Washington (est 90%) ___________%

0012 All work in Western Washington (est 9%) ___________%

0013 All work in Oregon (est 0.33%) ___________%

0014 All work in Idaho (est 0.33%) ___________%

0015 All work in Montana (est 0.33%) ___________%

NOTES TO BID SCHEDULE:

1. Individuals and activities authorized to issue task orders: Any Contracting Officer in Seattle District, Corps of Engineers.

2. Supplies and Services that may be ordered:

A. Supplies and services will be specifically described in the individual task orders.

B. MAXIMUM – As described in SECTION 00 72 00, CONTRACT CLAUSES, FAR 52.216-19, ORDERING LIMITATIONS (OCT 1995)

C. MINIMUM – As described in SECTION 00 72 00, CONTRACT CLAUSES, FAR

52.216-19, ORDERING LIMITATIONS (OCT 1995)

D. Description of Work – As described in SECTION 00 73 00, SPECIAL

CONTRACT REQUIREMENT I, PURPOSE AND SCOPE

3. TIME PERIOD FOR ISSUANCE OF TASK ORDERS: As described in SECTION

00 73 00, SPECIAL CONTRACT REQUIREMENT 2, PEKIOD OF SERVICE.

4. Task orders may be issued by E-mail, mail, by facsimile, by electronic commerce methods or verbally.

5. The estimated percentages of work noted in this Schedule for the various geographical areas and for the three Contract periods are strictly estimates and for the purpose of evaluation of offers under the solicitation. Any difference between the estimated amount of work for any geographical area or for any Contract period stated in the solicitation and the actual amount of work awarded for that geographical area or Contract period during the performance of the Contract will not be grounds for any claim.

6. While the overall Contract capacity of $25 million is not subdivided between

Contract periods, it is noted that in no instance will the total amount of Task Order awards exceed $25 million in any given period of the Contract.

Alterations to the Contract

Reserved for after award

IF THE CONTRACTOR IS A CORPORATION OR PARTNERSHIP, THE APPLICABLE PORTION OF

THE FORM LISTED BELOW MUST BE COMPLETED. IN THE ALTERNATIVE, OTHER EVIDENCE

MUST BE SUBMITTED TO SUBSTANTIATE THE AUTHORITY OF THE PERSON SIGNING THE

CONTRACT. IF A CORPORATION, THE SAME OFFICER SHALL NOT EXECUTE BOTH THE CONTRACT

AND THE CERTIFICATE.

CORPORATE CERTIFICATE

I, _______________________, certify that I am the _________________________ Secretary of the Corporation named as Contractor herein; that _________________________________, who signed this contract on behalf of the Contractor was then ___________________________of said corporation; that said contract was duly signed for and on behalf of said corporation by authority of its governing body and is within the scope of its corporate powers.

_____________________________ (CORPORATE

(Secretary) SEAL)

AUTHORITY TO BIND PARTNERSHIP

This is to certify that the names, signatures and Social Security Numbers of all partners are listed below and that the person signing the contract has authority actually to bind the partnership pursuant to its partnership agreements. Each of the partners individually has full authority to enter into and execute contractual instruments on behalf of said partnership with the United States of America, except as follows:

(state "none" or describe limitations, if any) ____________________________________________

This authority shall remain in full force and effect until such time as the revocation of authority by any cause whatsoever has been furnished in writing to, and acknowledged by, the Contracting Officer.

(Names, Signatures and Social Security Numbers of all Partners)

NAME SIGNATURE SOCIAL SECURITY NO.

Section 00 21 00 - Instructions, Conditions and Notices to Offeror

SECTION 00 21 00

INSTRUCTIONS, CONDITIONS AND NOTICES TO OFFERORS

Table of Contents

1. General Information

2. General Description of Work

3. Copies of Solicitation Documents and Amendments

4. Inquiries and Comments

5. Small Business Size Standard / NAICS Code

6. Proposal Expenses and Pre-Award Costs

7. Access Requirements and Directions

8. Pre-Proposal Conference and Site Visit

9. Accuracy in Proposals

10. Proposal Submittals

11. Joint Venture Proposal Requirements

12. Bid Guarantee

13. Subcontracting Goals Regarding the Utilization of Small Business Concerns

14. Solicitation Provisions

1. General Information

Competition for this solicitation is set aside for all eligible Small Business concerns only.

2. General Description of Work

Contract Title: Single Award Task Order Contract (SATOC) for Multi-Disciplinary Maintenance, Repair and Minor Construction Work in Support of Joint Base Lewis-McChord (JBLM) Public Works and Other Customers Supported by the Seattle District US Army Corps of Engineers

The purpose of this $25,000,000 SATOC is to provide multi-disciplinary maintenance, repair and minor construction work, primarily in support of JBLM Public Works and other Customers supported by the Seattle District US Army Corps of Engineers (USACE). This SATOC will be an Indefinite-Delivery, Indefinite-Quantity (IDIQ) type contract. The individual Task Orders negotiated and awarded under this Contract will be firm-fixed price with an anticipated range of $50,000 to $2,500,000. Projects may be located in Washington, Oregon, Idaho and Montana with the majority of projects located at Yakima Training Center (YTC) and Joint Base Lewis-McChord (JBLM), Washington.

Task Orders will involve a broad range of multi-disciplinary maintenance and repair, and minor construction work and may include a variety of trades such as carpentry, road repair, roofing, excavation, interior/exterior elements, mechanical, electrical, steam welding, asbestos, and lead paint abatement incidental to construction. The Contract may also be used for Task Orders expected to require some incidental design effort by the Contractor, to include, but not be limited to, fire alarm systems, fire sprinkler systems, HVAC system installation and balancing, communications systems, structural design of minor facilities or components and licensed professional engineer certification of site adaptation of pre-engineered structures. Task Orders issued under this Contract may also include the following types of work incidental to the project: environmental abatement, erosion control, earthwork, mechanical work, plumbing work, system testing, requirements for anti-terrorism and force protection (ATFP), LEED, LID, EISA, EPAct, and historical building renovations.

The Contractor shall provide all plant, labor, tools, equipment and materials (unless indicated otherwise in the specifications) to perform all work in strict accordance with the Base Contract and individual Task Order requirements.

3. Copies of Solicitation Documents and Amendments

Copies of the solicitation and amendments are available by INTERNET ACCESS ONLY. All solicitation documents will be posted to the Federal Business Opportunities (FBO) website at: http://www.fbo.gov under solicitation number W912DW-17-R-0021. Registration is required to download documents from the FBO website.

It is the responsibly of all offerors to check the FBO website for any amendments. The offeror shall submit all requested information specified in this solicitation when submitting a proposal. There will be no public opening of the proposals received in response to this solicitation. A list of interested vendors (potential offerors and subcontractors) is available on the FBO website.

4. Inquiries and Comments

ALL inquiries and comments regarding this solicitation are to be submitted via ProjNet Suite. Telephone and email inquiries will not be accepted. ProjNet Suite is a web-based program that allows offerors to post all inquiries regarding the solicitation, to view all inquiries by other offerors, and view all responses to those inquiries released by USACE. ProjNet can be accessed through ProjNet Suite at https://www.projnet.org to access the ProjNet-Bidsm website the first time:

1) Click the Bid tab

2) Click Bidder Inquiry. (The Agency is USACE.)

3) Enter the following information for access:

1. The Bidder Inquiry Key: FP7VAW-AEA6YB

2. Valid business contact information (e.g. Company name, contact person, business address, phone number and email address). (required on first project only)

3. Establish Secret Question and Answer which will be used as a password (required on first project only) 3.b) For subsequent access use your email address, the Bid Inquiry Key and response to the Secret Question to access the ProjNet-Bidsm Module.

4) Submit technical questions. When an answer is posted to a question, the question and answer is then available for all other bidders to review.

5) For questions about the ProjNet-Bidsm, please contact the Call Center help desk toll free at 1-800-428- HELP (4357), which operates from 8AM to 5PM (Central US time zone).

No response will be posted to inquiries after the Close of Business on the fifth business day preceding the solicitation due date. All bidders will be held to have reviewed the inquiries and responses in ProjNet prior to proposal submission. Nothing in the solicitation is changed unless an amendment is sent out. All amendments must be acknowledged in the proposal.

5. Small Business Size Standard / NAICS Code

The North American Industry Classification System (NAICS) Code for this acquisition is 236220. The small business size standard is $36.5M.

6. Proposal Expenses and Pre-Award Costs

This Request for Proposals (RFP) does not commit the Government to pay, as a direct charge, any costs incurred in the preparation and submission of a proposal.

7. Access Requirements and Directions

JBLM is a controlled access installation. In order to gain access to attend the pre-proposal conference, site-visit, and submit your proposal through hand-delivery, a temporary one (1) day vehicle pass is required to drive on JBLM.

The pass may be obtained from the Visitor Center at the JBLM Main Gate. Due to heightened security, the following procedures describe how to gain access for yourself and any subcontractors attending (if they or you do not have current access to the military installation):

All attendees must have valid picture identification*. All attendees driving privately-owned vehicles (POVs) must have a valid driver’s license, proof of vehicle insurance and vehicle registration. For rental vehicle access, you must have a rental agreement.

* REAL ID Act: On 1 May 2016, JBLM began enforcing the provisions of the REAL ID Act, passed by Congress in 2005. Under the provisions of this Act, a standard driver’s license or ID card issued by any of the following states is not accepted for unescorted access on JBLM: Minnesota, Missouri and Washington. Persons requesting unescorted access on JBLM and who present a standard license or ID from one of those states will be required to present additional documentation to verify their identity prior to being allowed access on JBLM. The list of acceptable documents to present, along with a standard driver’s license or ID Card issued by one of those states, include: DoD CAC, DoD Uniformed Services Identification and Privileges Cards, U.S. Passport or U.S. Passport Card, VA Issued Health Card, U.S. Coast Guard Merchant Mariner Card, Transportation Worker ID Card (TWIC) issued by DHS, U.S. Government issued, authenticated Federal PIV credentials. US Military or Draft Record containing name and DOB, etc. A full list acceptable identification verification documents accepted can be found at http://www.lewis-mcchord.army.mil/ under ‘Access to JBLM’/’Visitors center’/”Visitor Information”. A state Enhanced Driver’s License (EDL) from Washington State and Minnesota are acceptable for access. Please visit the Department of Homeland Security (DHS) website at https://www.dhs.gov/real-id-frequently-asked-questions for more information regarding REAL ID and frequently asked questions.

*ACCESS TO YAKIMA TRAINING CENTER (YTC): Site visit attendees must provide the following information in the email five days prior to Carol Perkins via email: carol.j.perkins@usace.army.mil

(1) Solicitation Number

(2) Project Title

(3) Name of individual(s) attending

(4) Name of company being represented

(5) Phone number of company

(6) Are all individuals U.S. Citizens?

If not, please refer to ACCESS FOR FOREIGN NATIONALS in Section 00800

Each individual must have picture identification on his/her person while at the project site. There can be no substitutions of one individual for another. If an individual arrives at the site visit without having called ahead of time and/or without picture identification, that individual may not be allowed on the project.

Participants of scheduled site visit must abide by the U.S. Army Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1, latest version) in accordance with Section 5, “Personal Protective and Safety Equipment.” It is the responsibility of the participants to wear personal protective and safety equipment as required by this regulation.

Failure to comply could result in denial of access to site visit location.

The latest version of EM 385-1-1 is available online at:

http://www.usace.army.mil/SafetyandOccupationalHealth.aspx

DIRECTIONS to Visitor Center / Liberty Gate (Main Gate): From I-5, take Exit 120 (JBLM - Lewis Main) and proceed to the Visitor Center. The Visitor Center is on the far right just before the Main Gate.

DIRECTIONS to Building 2015: From I-5, take Exit 120 (JBLM - Lewis Main) and proceed through Main Gate.

Turn right at the 3rd stop light onto Pendleton Avenue. Building 2015 will be on the left, at the corner of North 4th Street and Pendleton Avenue, next to the Fire Station. Parking is available across the street or at the back or side of the building.

DIRECTIONS TO Building 810 (YTC): Take Exit 26 off Hwy I82; turn east towards Gas Station; Stay on main road and it will take you to the Yakima Training Center. Go through Guard Shack, stay straight until you see base buildings (Lt yellow/tan colored on left side (west) of road. There will be two parking lots, Contractors may park in either parking lot. You will see Bldg 810 for Dept. of Public Works,enter front of building and follow signs to conference room. If you get lost the COE Office is the yellow/tan trailer next to DPW.

8. Pre-Proposal Conference and Site Visit

A one-time pre-proposal conference and site visit for the Seed Project will be conducted on 21 August 2017 at 10:30 am (PST), at Building 810, Conference Room, Yakima Training Center (YTC), Yakima, WA. Offerors and any subcontractors desiring to attend should arrive no later than 10:15 am local time for the pre-proposal conference.

The site visit for the Seed Project will immediately follow.

OFFERORS ARE URGED AND EXPECTED to inspect the site where construction is to be performed and to satisfy themselves as to all general and local conditions which may affect the cost of performance of the Contract, to the extent such information is reasonably obtainable. In no event will a failure to inspect the site constitute grounds for withdrawal of an offer after opening or for a claim after award of the Contract.

9. Accuracy in Proposals

Proposals must set forth full, accurate, and complete information as required by this RFP (including attachments).

The penalty for making false statements is prescribed in 18 U.S.C. 1001.

10. Proposal Submittals

Proposals may be either hand delivered or submitted through a common carrier such as FedEx, UPS, etc. NOTE:

THE U.S. POSTAL SERVICE (USPS) DOES NOT DELIVER TO THIS OFFICE. Proposals must be received no later than the time specified on the Standard Form (SF) 1442, Page 1, Item 13a or as amended under an amendment to the solicitation. For additional requirements, see Section 00 24 00.

The packaging that contains the Proposal shall be marked:

Proposal for Solicitation Number W912DW-17-R-0021, DO NOT OPEN

ADDRESS TO SUBMIT PROPOSALS (for both methods of delivery):

U.S. Army Corps of Engineers Special Projects Branch Attn: Shelia Welsh (Rm 336) Bldg 2015 North 4th & Pendleton Ave

JBLM, WA 98433

METHODS OF DELIVERY (hand delivery or common carrier):

a. Hand-Delivery Instructions: Proposals may be hand delivered. Proposals shall be submitted to Shelia Welsh, or designated contracting representative, at Bldg 2015, Third Floor, Rm 336. If you arrive and contracting personnel are not on-site, contact Shelia Welsh at 253-967-4823 or Elke Neal at 253-966-4359.

It is your responsibility to ensure that your proposal is submitted on time. Refer to Federal Acquisition Regulation (FAR) 52.215-1 for rules concerning late proposals. LATE OFFERORS WILL NOT BE

CONSIDERED.

OR

b. Common Carrier Delivery Instructions: Proposals may be delivered by a common carrier such as FedEx, UPS, etc. DO NOT ATTEMPT TO SUBMIT YOUR PROPOSAL THROUGH THE U.S. POSTAL

SERVICE.

11. Joint Venture Proposal Requirements

When proposing as a Joint Venture, all members of the Joint Venture shall sign the SF 1442, Authority to Bind and the Bid Bond unless a written agreement by the Joint Venture is furnished with the proposal designating one firm with the authority to bind the other member(s) of the Joint venture. In addition, a copy of the Joint Venture agreement shall be submitted with the proposal. Failure to comply with the foregoing requirements may eliminate the proposal from further consideration. If the offeror is an 8(a) Joint Venture, the offeror shall ensure compliance with the applicable requirements of 13 CFR Part 124 and, if the offeror is a HUBZone Joint Venture, the offeror shall ensure compliance with the applicable requirements of 13 CFR Part 126, respectively. Refer to Section 00 24 00 for information pertaining to proposal submission requirements for Joint Ventures.

12. Bid Guarantee

In accordance with Section 00 21 00, FAR 52.228-1, Bid Guarantee, a bid bond for the Seed Project must accompany your offer in response to this solicitation and shall be 20 percent of the proposed price for the Seed

Project, or $3,000,000, whichever is less. The Standard Form (SF) 24, dated 08/2016, shall be used for the submission of your bid bond and can be obtained from http://www.gsa.gov/portal/forms/type/SF. Refer to Section 00 24 00 for additional information pertaining to Bid Bond submission requirements. Facsimile bonds are not acceptable.

13. Subcontracting Goals Regarding the Utilization of Small Business Concerns

The clauses listed below apply to all offerors submitting proposals and special attention should be directed to these as incorporated into the Solicitation:

52.219-8, Utilization of Small Business Concerns 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns

14. Solicitation Provisions

See the following Provisions applicable to this Solicitation in Section 00 21 00 and Section 00 45 00.

CLAUSES INCORPORATED BY REFERENCE

52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.214-34 Submission Of Offers In The English Language APR 1991 52.214-35 Submission Of Offers In U.S. Currency APR 1991 52.215-1 Instructions to Offerors--Competitive Acquisition JAN 2017 52.216-27 Single or Multiple Awards OCT 1995 52.222-5 Construction Wage Rate Requirements--Secondary Site of the

Work

MAY 2014

52.223-4 Recovered Material Certification MAY 2008 52.236-28 Preparation of Proposals--Construction OCT 1997 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

CLAUSES INCORPORATED BY FULL TEXT

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2016)

(a) Definitions. As used in this provision--

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) database means that--

(1) The Offeror has entered all mandatory information, including the unique entity identifier and the EFT indicator, if applicable, the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14) into the SAM database;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b)(1) By submission of an offer, the Offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation ``Unique Entity Identifier'' followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable. The unique entity identifier will be used by the Contracting Officer to verify that the Offeror is registered in the SAM database.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state, and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company headquarters name and address (reporting relationship within your entity).

(d) If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.

(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.

(f) Offerors may obtain information on registration at https://www.acquisition.gov.

(End of clause)

52.215-1 INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (JAN 2004)

(a) Definitions. As used in this provision--

“Discussions” are negotiations that occur after establishment of the competitive range that may, at the Contracting Officer's discretion, result in the offeror being allowed to revise its proposal.

“In writing or written” means any worded or numbered expression which can be read, reproduced, and later communicated, and includes electronically transmitted and stored information.

“Proposal modification” is a change made to a proposal before the solicitation's closing date and time, or made in response to an amendment, or made to correct a mistake at any time before award.

“Proposal revision” is a change to a proposal made after the solicitation closing date, at the request of or as allowed by a Contracting Officer as the result of negotiations.

“Time”, if stated as a number of days, is calculated using calendar days, unless otherwise specified, and will include

Saturdays, Sundays, and legal holidays. However, if the last day falls on a Saturday, Sunday, or legal holiday, then the period shall include the next working day.

(b) Amendments to solicitations. If this solicitation is amended, all terms and conditions that are not amended remain unchanged. Offerors shall acknowledge receipt of any amendment to this solicitation by the date and time specified in the amendment(s).

(c) Submission, modification, revision, and withdrawal of proposals. (1) Unless other methods (e.g., electronic commerce or facsimile) are permitted in the solicitation, proposals and modifications to proposals shall be submitted in paper media in sealed envelopes or packages (i) addressed to the office specified in the solicitation, and (ii) showing the time and date specified for receipt, the solicitation number, and the name and address of the offeror.

Offerors using commercial carriers should ensure that the proposal is marked on the outermost wrapper with the information in paragraphs (c)(1)(i) and (c)(1)(ii) of this provision.

(2) The first page of the proposal must show--

(i) The solicitation number;

(ii) The name, address, and telephone and facsimile numbers of the offeror (and electronic address if available);

(iii) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and agreement to furnish any or all items upon which prices are offered at the price set opposite each item;

(iv) Names, titles, and telephone and facsimile numbers (and electronic addresses if available) of persons authorized to negotiate on the offeror's behalf with the Government in connection with this solicitation; and

(v) Name, title, and signature of person authorized to sign the proposal. Proposals signed by an agent shall be accompanied by evidence of that agent's authority, unless that evidence has been previously furnished to the issuing office.

(3) Submission, modification, or revision, of proposals.

(i) Offerors are responsible for submitting proposals, and any modifications, or revisions, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that proposal or revision is due.

(ii)(A) Any proposal, modification, or revision received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(1) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of proposals; or

(2) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(3) It is the only proposal received.

(B) However, a late modification of an otherwise successful proposal that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(iii) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the proposal wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(iv) If an emergency or unanticipated event interrupts normal Government processes so that proposals cannot be received at the office designated for receipt of proposals by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation, the time specified for receipt of proposals will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(v) Proposals may be withdrawn by written notice received at any time before award. Oral proposals in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile proposals, proposals may be withdrawn via facsimile received at any time before award, subject to the conditions specified in the provision at 52.215-5, Facsimile Proposals. Proposals may be withdrawn in person by an offeror or an authorized representative, if the identity of the person requesting withdrawal is established and the person signs a receipt for the proposal before award.

(4) Unless otherwise specified in the solicitation, the offeror may propose to provide any item or combination of items.

(5) Offerors shall submit proposals in response to this solicitation in English, unless otherwise permitted by the solicitation, and in U.S. dollars, unless the provision at FAR 52.225-17, Evaluation of Foreign Currency Offers, is included in the solicitation.

(6) Offerors may submit modifications to their proposals at any time before the solicitation closing date and time, and may submit modifications in response to an amendment, or to correct a mistake at any time before award.

(7) Offerors may submit revised proposals only if requested or allowed by the Contracting Officer.

(8) Proposals may be withdrawn at any time before award. Withdrawals are effective upon receipt of notice by the Contracting Officer.

(d) Offer expiration date. Proposals in response to this solicitation will be valid for the number of days specified on the solicitation cover sheet (unless a different period is proposed by the offeror).

(e) Restriction on disclosure and use of data. Offerors that include in their proposals data that they do not want disclosed to the public for any purpose, or used by the Government except for evaluation purposes, shall--

(1) Mark the title page with the following legend: This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed--in whole or in part--for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of--or in connection with-- the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government's right to use information contained in this data if it is obtained from another source without restriction. The data subject to this restriction are contained in sheets [insert numbers or other identification of sheets]; and

(2) Mark each sheet of data it wishes to restrict with the following legend: Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal.

(f) Contract award. (1) The Government intends to award a contract or contracts resulting from this solicitation to the responsible offeror(s) whose proposal(s) represents the best value after evaluation in accordance with the factors and subfactors in the solicitation.

(2) The Government may…