WPES_Specs_VOL_2.pdf

WEST POI NT ELEMENTARY SCHOOL REPLACEMENT W91236-15-D-0014

SECTI ON 12 24 13

ROLLER WI NDOW SHADES

08/10

PART 1 GENERAL

1. 1 GENERAL REQUI REMENTS

Pr ovi de r ol l er wi ndow shades, compl et e wi t h necessar y br acket s, f i t t i ngs, and har dwar e as i ndi cat ed. Mount and oper at e equi pment i n accor dance wi t h manuf act ur er ' s i nst r uct i ons. Wi ndows t o r ecei ve a shade shal l be compl et el y cover ed.

a. Submi t dr awi ngs showi ng pl ans, el evat i ons, sect i ons, pr oduct det ai l s , i nst al l at i on det ai l s , oper at i onal c l ear ances, wi r i ng di agr ams and r el at i onshi p t o adj acent wor k. I ncl ude t he use of same r oom desi gnat i ons as i ndi cat ed on t he dr awi ngs.

b. Pr ovi de manuf act ur er ' s dat a composed of cat al og cut s, br ochur es, pr oduct i nf or mat i on, and oper at i ng and mai nt enance i nst r uct i ons on each pr oduct t o be used. I ncl ude st y l es, pr of i l es and f eat ur es.

c. Fur ni sh sampl es of each t ype and col or of r ol l er shade f abr i c and r ol l er shade channel . Shade mat er i al shal l be mi ni mum6 by 6 i nch i n s i ze. Mar k f ace of mat er i al t o i ndi cat e i nt er i or f aces.

d. Mock up: I nst al l shade i n ar ea desi gnat ed by Cont r act i ng Of f i cer . Do not pr oceed wi t h r emai ni ng wor k unt i l t he Cont r act i ng Of f i cer appr oves wor kmanshi p and oper at i on. Re- wor k mock- up as r equi r ed t o pr oduce accept abl e wor k. The appr oved shade can be used i n i nst al l at i on.

e. Submi t f i r e r esi st ance dat a, f l ame spr ead and smoke cont r i but i on dat a.

1. 2 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by basi c desi gnat i on onl y.

ASTM I NTERNATI ONAL ( ASTM)

ASTM G21 ( 2013) Det er mi ni ng Resi st ance of Synt het i c Pol ymer i c Mat er i al s t o Fungi

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 701 ( 2015) St andar d Met hods of Fi r e Test s f or Fl ame Pr opagat i on of Text i l es and Fi l ms

UNDERWRI TERS LABORATORI ES ( UL)

UL 325 ( 2013; Repr i nt May 2015) Door , Dr aper y, Gat e, Louver , and Wi ndow Oper at or s and Systems

SECTI ON 12 24 13 Page 1

1. 3 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00

SUBMI TTAL PROCEDURES

SD- 02 Shop Dr awi ngs

I nst al l at i on; G

SD- 03 Pr oduct Dat a

Wi ndow Shades; G

SD- 04 Sampl es

Wi ndow Shades; G

SD- 06 Test Repor t s

Wi ndow Shades

SD- 08 Manuf act ur er ' s I nst r uct i ons

Wi ndow Shades

SD- 10 Oper at i on and Mai nt enance Dat a

Wi ndow Shades

1. 4 QUALI TY ASSURANCE

1. 4. 1 Qualifications

1. 4. 1. 1 Manuf act ur er ' s Qual i f i cat i ons

Obt ai n mot or - cont r ol l ed r ol l er shades t hr ough one sour ce f r om a s i ngl e manuf act ur er wi t h a mi ni mum of t went y year s exper i ence and mi ni mum of t hr ee pr oj ect s of s i mi l ar scope and si ze i n manuf act ur i ng pr oduct s compar abl e t o t hose speci f i ed i n t hi s sect i on.

1. 4. 1. 2 I nst al l er ' s Qual i f i cat i ons

I nst al l er t r ai ned and cer t i f i ed by t he manuf act ur er wi t h a mi ni mum of t en year s exper i ence i n i nst al l i ng pr oduct s compar abl e t o t hose speci f i ed i n t hi s sect i on.

1. 4. 2 Fl ammabi l i t y Requi r ement s

Passes i n accor dance wi t h NFPA 701 smal l and l ar ge- scal e ver t i cal bur n.

Mat er i al s t est ed shal l be i dent i cal t o pr oduct s pr oposed f or use.

1. 4. 3 El ect r i cal Requi r ement s

NFPA Ar t i c l e 100 l i s t ed and l abel ed i n accor dance wi t h UL 325 or ot her t est i ng agency accept abl e t o aut hor i t i es havi ng j ur i sdi ct i on, mar ked f or i nt ended use, and t est ed as a syst em. I ndi v i dual t est i ng of component s wi l l no be accept abl e i n l i eu of syst em t est i ng.

SECTI ON 12 24 13 Page 2

1. 4. 4 Ant i - Mi cr obi al Requi r ement s

' No Gr owt h' per ASTM G21 r esul t s f or f ungi ATCC9642, ATCC 9644, ATCC9645.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

Del i ver component s t o t he j obsi t e i n t he manuf act ur er ' s or i gi nal packagi ng wi t h t he br and or company name, i t em i dent i f i cat i on, and pr oj ect r ef er ence cl ear l y mar ked. St or e component s i n a dr y l ocat i on t hat i s adequat el y vent i l at ed and f r ee f r om dust , wat er , or ot her cont ami nant s and has easy access f or i nspect i on and handl i ng. St or e mat er i al s f l at i n a c l ean dr y ar ea wi t h t emper at ur e mai nt ai ned above 50 degr ees F. Do not open cont ai ner s unt i l needed f or i nst al l at i on unl ess ver i f i cat i on i nspect i on i s required.

1. 6 WARRANTY

Pr ovi de 10 year mi ni mum l i mi t ed war r ant y.

PART 2 PRODUCTS

2. 1 WI NDOW SHADES

Rol l er t ube shal l oper at e smoot hl y and be of suf f i c i ent di amet er and t hi ckness t o pr event excessi ve def l ect i on. Pr ovi de br acket s t hat ar e appr opr i at e f or i nsi de mount . The shade cl ot h shal l meet t he per f or mance descr i bed i n NFPA 701, smal l scal e t est . Tr eat st eel f eat ur es f or cor r osi on r esi st ance.

2. 1. 1 Li ght Fi l t er i ng Shades

Pr ovi de l i ght f i l t er i ng wi ndow shades t o conf or m wi t h t he f ol l owi ng:

a. Rol l er t ube shal l be ext r uded al umi num or st eel . Di amet er , wal l t hi ckness, and mat er i al t o be sel ect ed by t he manuf act ur er t o accommodat e t he shade si ze. Pr ovi de r ol l er i dl er assembl y of mol ded nyl on and zi nc- pl at ed st eel pi n. Sl i di ng pi n shal l al l ow easy i nst al l at i on and r emoval of r ol l er . Fabr i c shal l be connect ed t o t he r ol l er t ube wi t h doubl e s i ded adhesi ve speci f i cal l y devel oped t o at t ach coat ed t ext i l es t o met al t o el i mi nat e hor i zont al i mpr essi ons i n f abr i c or at t ached wi t h a spl i ne l ock syst em.

b. Fasci a shal l be L- shaped al umi num ext r usi on t o conceal shade r ol l er and har dwar e t hat snaps ont o end caps wi t hout r equi r i ng exposed f ast ener s of any k i nd. Fasci a can be mount ed cont i nuousl y acr oss t wo or mor e shade bands.

c. End caps shal l be st amped st eel wi t h uni ver sal desi gn sui t abl e f or mount i ng t o wi ndow mul l i ons. Pr ovi de s i ze compat i bl e wi t h r ol l er s i ze. End cap cover s shal l mat ch f asci a/ headbox f i ni sh.

d. Pr ovi de har dwar e t hat al l ows f or f i el d adj ust ment or r emoval of shade r ol l er t ube and ot her oper abl e har dwar e component or adj ust ment of mot or wi t hout r equi r i ng r emoval of br acket s and end or cent er suppor t s.

Pr ovi de el ect r i cal har dwar e syst em t hat al l ows f or oper at i on of mul t i pl e shade bands by a s i ngl e oper at or . Connect or s shal l be of f set t o assur e al i gnment f r om t he f i r s t t o t he l ast shade band. Pr ovi de shade har dwar e const r uct ed of mi ni mum 1/ 8 i nch t hi ck pl at ed st eel or

SECTI ON 12 24 13 Page 3 heavi er as r equi r ed t o suppor t 150 per cent of t he f ul l wei ght of each shade.

e. Manual Oper at ed Chai n Dr i ve Har dwar e shal l pr ovi de f or uni ver sal , r egul ar and of f set dr i ve capaci t y , al l owi ng dr i ve chai n t o f al l at f r ont , r ear or non- of f set f or al l shade dr i ve end br acket s. Uni ver sal of f set shal l be adj ust abl e f or f ut ur e change. Pr ovi de posi t i ve mechani cal engagement of dr i ve mechani sm t o shade r ol l er t ube. The dr i ve br acket shal l be f ul l y i nt egr at ed wi t h al l accessor i es. Dr i ve chai n shal l be #10 st ai nl ess st eel chai n r at ed t o 90 l b. mi ni mum br eaki ng st r engt h.

f . Mot or s shal l be har d- wi r ed, wi r ed i nt o t he bui l di ng el ect r i cal syst em.

The posi t i on of t he mot or and el ect r i cal connect i on shal l be l ef t or r i ght s i de of r ol l er , based on t he hand of t he user f aci ng t he shade f r om i nsi de, unl ess ot her wi se i ndi cat ed on dr awi ngs.

g. Act i vat i on Cont r ol s of Shades:

( 1) Wal l mount ed cont r ol s: swi t ches ar e abl e t o el ect r oni cal l y set and r econf i gur e shade open and cl ose l i mi t s, shade pr eset posi t i ons, syst em gr oups and syst em subgr oups at t he cont r ol wi t hout r ewi r i ng and wi t hout access t o t he El ect r oni c Dr i ve Uni t .

i . Swi t ches t hat ar e adj ust abl e and i nt er l ocked wi t h mot or cont r ol s and set t o aut omat i cal l y st op t he shade at f ul l y r ai sed and f ul l y l ower ed posi t i ons shal l be pr ovi ded. Low vol t age swi t chi ng i s r equi r ed.

j . Oper at i ng f unct i on: St op and hol d shade at any posi t i on.

k. Pr ovi de t he f ol l owi ng opt i ons: Low Vol t age Syst em Gr oup swi t chi ng wi t h i nt egr at ed swi t ch cont r ol ; s i ngl e f ace pl at e f or mul t i pl e swi t ch cut-outs.

2. 2 COLOR

Pr ovi de col or , pat t er n and t ext ur e f or met al and shade f abr i c as i ndi cat ed. Col or l i s t ed i s not i nt ended t o l i mi t t he sel ect i on of equal col or s f r om ot her manuf act ur er s. Openness f act or of shade f abr i c must be 5 percent.

PART 3 EXECUTI ON

3. 1 FI ELD MEASUREMENTS

Af t er becomi ng f ami l i ar wi t h det ai l s of t he wor k, ver i f y al l di mensi ons i n t he f i el d, and advi se t he Cont r act i ng Of f i cer of any di scr epancy bef or e per f or mi ng t he wor k.

3. 2 INSTALLATION

Per f or m i nst al l at i on i n accor dance wi t h t he appr oved det ai l dr awi ngs and manuf act ur er ' s i nst al l at i on i nst r uct i ons. I nst al l uni t s l evel , pl umb, secur e, and at pr oper hei ght and l ocat i on r el at i ve t o wi ndow uni t s.

Pr ovi de and i nst al l suppl ement ar y or mi scel l aneous i t ems i n t ot al , i ncl udi ng c l i ps, br acket s, or anchor ages i nci dent al t o or necessar y f or a sound, secur e, and compl et e i nst al l at i on. Do not st ar t i nst al l at i on unt i l compl et i on of r oom pai nt i ng and f i ni shi ng oper at i ons.

SECTI ON 12 24 13 Page 4

3. 3 CLEAN-UP

Upon compl et i on of t he i nst al l at i on, c l ean wi ndow t r eat ment s and adj ust t hem f or f or m and appear ance and pr oper oper at i ng condi t i on. Repai r or r epl ace damaged uni t s as di r ect ed by t he Cont r act i ng Of f i cer . I sol at e met al par t s f r om di r ect cont act wi t h concr et e, mor t ar , or di ssi mi l ar met al s. Ensur e shades i nst al l ed i n r ecessed pocket s can be r emoved wi t hout di st ur bi ng t he pocket . The ent i r e shade, when r et r act ed, shal l be cont ai ned i nsi de t he pocket . For shades i nst al l ed out s i de t he j ambs and mul l i ons, over l ap each j amb and mul l i on 0. 75 i nch or mor e when t he j amb and mul l i on s i zes per mi t . I ncl ude al l har dwar e, br acket s, anchor s, f ast ener s, and accessor i es necessar y f or a compl et e, f i ni shed i nst al l at i on.

- - End of Sect i on - -

SECTI ON 12 24 13 Page 5

SECTI ON 12 48 13

ENTRANCE FLOOR MATS AND FRAMES

02/14

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

ASTM I NTERNATI ONAL ( ASTM)

ASTM B221 ( 2014) St andar d Speci f i cat i on f or Al umi num and Al umi num- Al l oy Ext r uded Bar s, Rods, Wi r e, Pr of i l es, and Tubes

ASTM D2047 ( 2011) St at i c Coef f i c i ent of Fr i c t i on of Pol i sh- Coat ed Fl oor Sur f aces as Measur ed by t he James Machi ne

ASTM E648 ( 2014c) St andar d Test Met hod f or Cr i t i cal Radi ant Fl ux of Fl oor - Cover i ng Syst ems Usi ng a Radi ant Heat Ener gy Sour ce

U. S. GREEN BUI LDI NG COUNCI L ( USGBC)

LEED NC ( 2009) Leader shi p i n Ener gy and Envi r onment al Desi gn( t m) f or School s New Const r uct i on Rat i ng Syst em

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

36 CFR 1191 Amer i cans wi t h Di sabi l i t i es Act ( ADA) Accessi bi l i t y Gui del i nes f or Bui l di ngs and Faci l i t i es; Ar chi t ect ur al Bar r i er s Act ( ABA) Accessi bi l i t y Gui del i nes

1. 2 SUSTAI NABI LI TY REPORTI NG

Mat er i al s i n t hi s t echni cal speci f i cat i on may cont r i but e t owar ds cont r act compl i ance wi t h sust ai nabi l i t y r equi r ement s.

1. 2. 1 LEED Requi r ement s

See Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG LEED ( TM) Document at i on f or project LEED NC l ocal / r egi onal mat er i al s, r ecycl ed cont ent , and l ow emi t t i ng mat er i al s r equi r ement s.

1. 2. 2 EPA Compr ehensi ve Pr ocur ement Gui del i nes

See Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG f or r equi r ement s associ at ed wi t h EPA desi gnat ed pr oduct s.

SECTI ON 12 48 13 Page 1

1. 2. 3 USDA Bi obased

See Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG f or r equi r ement s associ at ed wi t h USDA Bi obased desi gnat ed pr oduct s.

1. 3 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y Not ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

I nst al l at i on Dr awi ngs; G

Det ai l Dr awi ngs; G

SD- 03 Pr oduct Dat a

Ent r ance Fl oor Mat s and Fr ames; G

Adhesi ves and Concr et e Pr i mer s; G

SD- 04 Sampl es

Ent r ance Fl oor Mat s and Fr ames; G

SD- 08 Manuf act ur er ' s I nst r uct i ons

Manuf act ur er ' s I nst r uct i ons; G

SD- 10 Oper at i on and Mai nt enance Dat a

Pr ot ect i on, Mai nt enance, and Repai r I nf or mat i on; G

SD- 11 Cl oseout Submi t t al s

LEED ( TM) Document at i on; G

1. 4 QUALI TY ASSURANCE

Compl y wi t h 36 CFR 1191 Amer i cans wi t h Di sabi l i t i es Act ( ADA) Accessi bi l i t y Gui del i nes f or Bui l di ngs and Faci l i t i es; Ar chi t ect ur al Bar r i er s Act ( ABA) Accessi bi l i t y Gui del i nes f or i nst al l ed ent r ance f l oor mat s and f r ames.

Ensur e ent r ance f l oor mat s and f r ames ar e s l i p r es i st ant i n accor dance wi t h ASTM D2047, Coef f i c i ent of Fr i ct i on, mi ni mum 0. 60 f or accessi bl e r out es and be st r uct ur al l y capabl e of wi t hst andi ng a Uni f or m f l oor l oad of 300 l bf / sq.

f t . or wheel l oad of 350 l b. / wheel . Ensur e f l ammabi l i t y i s i n accor dance with ASTM E648, Cl ass 1, Cr i t i cal Radi ant Fl ux, mi ni mum 0. 45 wat t s/ m2.

1. 5 DELI VERY OF MATERI ALS

Del i ver mat er i al s t o t he pr oj ect s i t e i n t hei r or i gi nal packages or cont ai ner s bear i ng l abel s c l ear l y i dent i f y i ng t he manuf act ur er , br and name, and qual i t y or gr ade.

SECTI ON 12 48 13 Page 2

St or e mat er i al s i n t hei r or i gi nal unbr oken packages or cont ai ner s i n t he ar ea i n whi ch t hey wi l l be i nst al l ed. Unwr ap, i nspect , and pl ace mat s at i ndi cat ed l ocat i on. Remove al l excess packi ng mat er i al s.

PART 2 PRODUCTS

2. 1 Ent r ance Fl oor Mat s and Fr ames

Submi t manuf act ur er ' s cat al og dat a. Submi t sampl e of assembl ed sect i ons of f l oor mat showi ng cor ner s, i nt er sect i ons, and ot her det ai l s of const r uct i on. Submi t sampl es of exposed f l oor mat , f r ame f i ni sh and accessories.

2. 1. 1 Rol l - Up Mat s

Rol l - up mat s wi t h mi l l f i ni sh al umi num t r ead r ai l s spaced a maxi mum 2 i nch on cent er and r unni ng count er t o t he t r af f i c f l ow. Mat s must al l ow debr i s t o f al l t o sub- f l oor . Tr ead r ai l s ar e connect ed by al umi num hi nges and compl et e wi t h a v i nyl edge ar ound t he per i met er and a cont i nuous v i nyl cushion.

Rol l - up mat s r ecessed and sur f ace mount ed and pr ovi ded wi t h v i nyl or r ecycl ed r ubber i nser t s.

2. 1. 2 Frames

2. 1. 2. 1 Sur f ace Mount ed Fr ames

Sur f ace mount ed f r ames ar e 3/ 8 i nch deep t aper ed mi l l f i ni sh al umi num not l ess t han 1- 1/ 2 i nches wi de, scr ewed t o t he f l oor t o cr eat e an openi ng f or t he mat t o set i n.

2. 1. 2. 2 Recessed Fr ames

Recessed f r ames i n ext r uded al umi num Al l oy 6061- T6 ASTM B221 or Al l oy 6063-T5 ASTM B221. Ensur e f r ame dept h accommodat es mat and/ or syst em speci f i ed. Col or i s mi l l f i ni shed.

Edge- f r ame member s ar e f abr i cat ed i n s i ngl e l engt hs or mi ni mum pi eces possi bl e, wi t h hai r l i ne j oi nt s equal l y spaced and pi eces spl i ced t oget her by st r ai ght connect i ng pi ns. Ensur e conceal ed sur f aces of al umi num f r ames t hat cont act cement ous mat er i al ar e coat ed wi t h manuf act ur er ' s st andar d pr ot ect i ve coat i ng. Fr ames i ncl ude accessor i es and devi ces necessar y f or a compl et e i nst al l at i on.

2. 1. 3 Tr ead I nser t Opt i ons

Tr ead i nser t s consi st of v i nyl or r ecycl ed r ubber .

2. 2 ADHESI VES AND CONCRETE PRI MERS

Pr ovi de adhesi ves and concr et e pr i mer s, wher e r equi r ed, accor di ng t o manuf act ur er ' s r ecommendat i ons.

2. 3 COLOR AND SI ZE

Ensur e col or i s i n accor dance wi t h t he dr awi ngs. Si ze of mat s i s as indicated.

SECTI ON 12 48 13 Page 3

PART 3 EXECUTI ON

3. 1 EXAMINATION

Compl y wi t h manuf act ur er ' s r equi r ement s of subst r at es and f l oor condi t i ons af f ect i ng i nst al l at i on of f l oor mat s and f r ames. I nst al l at i on cannot occur unt i l unsat i sf act or y condi t i ons have been cor r ect ed.

3. 2 INSTALLATION

I nst al l f l oor mat s and f r ames accor di ng t o manuf act ur er ' s i nst r uct i ons.

Set mat t ops at hei ght r ecommended by manuf act ur er f or most ef f ect i ve c l eani ng act i on. Coor di nat e t op of mat sur f aces wi t h bot t om of door s t hat swi ng acr oss mat s t o pr ovi de c l ear ance bet ween door and mat . Coor di nat e r ecess f r ame i nst al l at i on wi t h concr et e const r uct i on t o ensur e f r ame anchor age i s cor r ect and t hat t he base i s l evel and f l at . I nst al l gr out and f i l l ar ound f r ames and, i f r equi r ed t o set mat t ops at pr oper el evat i ons, i n r ecesses under mat s. Fi ni sh gr out and f i l l smoot h and l evel .

Submi t det ai l dr awi ngs. Pr ovi de i nst al l at i on dr awi ngs. Pr ovi de manuf act ur er ' s pr ot ect i on, mai nt enance, and r epai r i nf or mat i on.

SECTI ON 12 48 13 Page 4

SECTI ON 12 93 00

SI TE FURNI SHI NGS

02/09

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN I NSTI TUTE OF STEEL CONSTRUCTI ON ( AI SC)

AI SC 303 ( 2010) Code of St andar d Pr act i ce f or St eel Bui l di ngs and Br i dges

AI SC 360 ( 2010) Speci f i cat i on f or St r uct ur al St eel Buildings

AMERI CAN SOCI ETY OF SAFETY ENGI NEERS ( ASSE/ SAFE)

ASSE/ SAFE A10. 3 ( 2013) Oper at i ons - Saf et y Requi r ement s f or Powder Act uat ed Fast eni ng Syst ems

AMERI CAN WELDI NG SOCI ETY ( AWS)

AWS D1. 1/ D1. 1M ( 2015; Er r at a 2015) St r uct ur al Wel di ng Code - St eel

AMERI CAN WOOD PROTECTI ON ASSOCI ATI ON ( AWPA)

AWPA C1 ( 2003) Al l Ti mber Pr oduct s - Pr eser vat i ve Tr eat ment by Pr essur e Pr ocesses

AWPA C9 ( 2003) Pl ywood - Pr eser vat i ve Tr eat ment by Pr essur e Pr ocesses

AWPA M2 ( 2011) St andar d f or I nspect i on of Tr eat ed Wood Pr oduct s

ASME I NTERNATI ONAL ( ASME)

ASME B18. 2. 1 ( 2012; Er r at a 2013) Squar e and Hex Bol t s and Scr ews ( I nch Ser i es)

ASME B18. 2. 2 ( 2010) Nut s f or Gener al Appl i cat i ons:

Machi ne Scr ew Nut s, Hex, Squar e, Hex Fl ange, and Coupl i ng Nut s ( I nch Ser i es)

ASME B18. 21. 1 ( 2009) Washer s: Hel i cal Spr i ng- Lock, Toot h Lock, and Pl ai n Washer s ( I nch Ser i es)

ASME B18. 6. 2 ( 1998; R 2010) Sl ot t ed Head Cap Scr ews, Squar e Head Set Scr ews, and Sl ot t ed Headl ess Set Scr ews: I nch Ser i es

SECTI ON 12 93 00 Page 1

ASME B18. 6. 3 ( 2013) Machi ne Scr ews, Tappi ng Scr ews, and Machi ne Dr i ve Scr ews ( I nch Ser i es)

ASTM I NTERNATI ONAL ( ASTM)

ASTM A1064/ A1064M ( 2015) St andar d Speci f i cat i on f or Car bon- St eel Wi r e and Wel ded Wi r e Rei nf or cement , Pl ai n and Def or med, f or Concrete

ASTM A123/ A123M ( 2013) St andar d Speci f i cat i on f or Zi nc ( Hot - Di p Gal vani zed) Coat i ngs on I r on and St eel Pr oduct s

ASTM A153/ A153M ( 2016) St andar d Speci f i cat i on f or Zi nc Coat i ng ( Hot - Di p) on I r on and St eel Hardware

ASTM A307 ( 2014) St andar d Speci f i cat i on f or Car bon St eel Bol t s and St uds, 60 000 PSI Tensi l e Strength

ASTM A36/ A36M ( 2014) St andar d Speci f i cat i on f or Car bon St r uct ur al St eel

ASTM A47/ A47M ( 1999; R 2014) St andar d Speci f i cat i on f or Fer r i t i c Mal l eabl e I r on Cast i ngs

ASTM A48/ A48M ( 2003; R 2012) St andar d Speci f i cat i on f or Gr ay I r on Cast i ngs

ASTM A500/ A500M ( 2013) St andar d Speci f i cat i on f or Col d- For med Wel ded and Seaml ess Car bon St eel St r uct ur al Tubi ng i n Rounds and Shapes

ASTM A501/ A501M ( 2014) St andar d Speci f i cat i on f or Hot - For med Wel ded and Seaml ess Car bon St eel St r uct ur al Tubi ng

ASTM A53/ A53M ( 2012) St andar d Speci f i cat i on f or Pi pe, St eel , Bl ack and Hot - Di pped, Zi nc- Coat ed, Wel ded and Seaml ess

ASTM A615/ A615M ( 2015a; E 2015) St andar d Speci f i cat i on f or Def or med and Pl ai n Car bon- St eel Bar s f or Concr et e Rei nf or cement

ASTM A653/ A653M ( 2015) St andar d Speci f i cat i on f or St eel Sheet , Zi nc- Coat ed ( Gal vani zed) or Zi nc- I r on Al l oy- Coat ed ( Gal vanneal ed) by t he Hot - Di p Pr ocess

ASTM A780/ A780M ( 2009; R 2015) St andar d Pr act i ce f or Repai r of Damaged and Uncoat ed Ar eas of Hot - Di p Gal vani zed Coat i ngs

ASTM B108/ B108M ( 2015) St andar d Speci f i cat i on f or

SECTI ON 12 93 00 Page 2

Al umi num- Al l oy Per manent Mol d Cast i ngs

ASTM B209 ( 2014) St andar d Speci f i cat i on f or Al umi num and Al umi num- Al l oy Sheet and Pl at e

ASTM B221 ( 2014) St andar d Speci f i cat i on f or Al umi num and Al umi num- Al l oy Ext r uded Bar s, Rods, Wi r e, Pr of i l es, and Tubes

ASTM B26/ B26M ( 2014; E 2015) St andar d Speci f i cat i on f or Al umi num- Al l oy Sand Cast i ngs

ASTM B62 ( 2015) St andar d Speci f i cat i on f or Composi t i on Br onze or Ounce Met al Cast i ngs

ASTM C150/ C150M ( 2015) St andar d Speci f i cat i on f or Por t l and Cement

ASTM C94/ C94M ( 2015) St andar d Speci f i cat i on f or Ready- Mi xed Concr et e

ASTM D1187/ D1187M ( 1997; E 2011; R 2011) Asphal t - Base Emul si ons f or Use as Pr ot ect i ve Coat i ngs f or Met al

ASTM D2990 ( 2009) Tensi l e, Compr essi ve, and Fl exur al Cr eep and Cr eep- Rupt ur e of Pl ast i cs

ASTM D3451 ( 2006; R 2012) Test i ng Coat i ng Powder s and Powder Coat i ngs

ASTM D648 ( 2007) Def l ect i on Temper at ur e of Pl ast i cs Under Fl exur al Load i n t he Edgewi se Position

ASTM E488/ E488M ( 2015) St andar d Test Met hods f or St r engt h of Anchor s i n Concr et e and Masonr y El ement s

ASTM F1487 ( 2011) Pl aygr ound Equi pment f or Publ i c Use

SOCI ETY FOR PROTECTI VE COATI NGS ( SSPC)

SSPC Pai nt 25 ( 1997; E 2004) Zi nc Oxi de, Al kyd, Li nseed Oi l Pr i mer f or Use Over Hand Cl eaned St eel , Type I and Type I I

U. S. GENERAL SERVI CES ADMI NI STRATI ON ( GSA)

CI D A- A- 1925 ( Rev A; Not i ce 2) Shi el d Expansi on ( Nai l Anchors)

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y Notebook.

SD- 02 Shop Dr awi ngs

SECTI ON 12 93 00 Page 3

Benches and Chai r s; G Tabl es; G Shel t er s; G Bi cycl e Racks; G Wast e Recept acl es; G Assembl y I nst r uct i on Dr awi ngs

SD- 03 Pr oduct Dat a

Benches and Chai r s Tables Shelters Bi cycl e Racks Wast e Recept acl es

SD- 04 Sampl es

Fi ni sh; G

SD- 06 Test Repor t s

Recycl ed Mat er i al s Testing

SD- 07 Cer t i f i cat es

Pr i mer cer t i f i cat e Powder coat i ngs cer t i f i cat e

1. 3 QUALI TY ASSURANCE

Qual i f y wel der s i n accor dance wi t h AWS D1. 1/ D1. 1M usi ng pr ocedur es, mat er i al s, and equi pment of t he t ype r equi r ed f or t he wor k.

1. 3. 1 Fabr i cat i on Dr awi ngs

Submi t f abr i cat i on dr awi ngs showi ng l ayout ( s) , connect i ons t o st r uct ur al syst em, and anchor i ng det ai l s as speci f i ed i n AI SC 303.

1. 3. 2 I nst al l at i on Dr awi ngs

Submi t t empl at es, er ect i on and i nst al l at i on dr awi ngs i ndi cat i ng t hi ckness, t ype, gr ade, c l ass of met al , and di mensi ons. Show const r uct i on det ai l s , r ei nf or cement , anchor age, and i nst al l at i on.

1. 3. 3 Assembl y I nst r uct i on Dr awi ngs

Submi t assembl y i nst r uct i on dr awi ngs showi ng l ayout ( s) , connect i ons, bol t i ng and anchor i ng det ai l s i n accor dance wi t h manuf act ur er ' s st andar ds.

Submi t dr awi ngs showi ng scal ed det ai l s of pr oposed si t e f ur ni shi ngs, el evat i ons f or each t ype of s i t e f ur ni shi ng; di mensi ons, det ai l s , and met hods of mount i ng or anchor i ng; shape and t hi ckness of mat er i al s; and det ai l s of const r uct i on.

1. 3. 4 Pr i mer Cer t i f i cat e

Submi t a cer t i f i cat e f r om t he manuf act ur er st at i ng t hat t he pr i mer conf or ms t o r equi r ement s of SSPC Pai nt 25.

SECTI ON 12 93 00 Page 4

1. 3. 5 Powder Coat i ngs Cer t i f i cat e

Submi t a cer t i f i cat e f r om t he manuf act ur er st at i ng t hat t he powder coat conf or ms t o ASTM D3451.

1. 4 DELI VERY, STORAGE, AND HANDLI NG

Shi p i t ems knocked- down ( KD) r eady f or s i t e assembl y. Packaged component s shal l be compl et e i ncl udi ng al l accessor i es and har dwar e. Mat er i al s shal l be del i ver ed, handl ed, and st or ed i n accor dance wi t h t he manuf act ur er ' s r ecommendat i ons. Si t e f ur ni shi ngs shal l be i nspect ed upon ar r i val at t he j ob s i t e f or conf or mi t y t o speci f i cat i ons and qual i t y i n accor dance wi t h par agr aph MATERI ALS. Pr ot ect f r om cor r osi on, st ai ni ng, and ot her t ypes of damage. St or e i t ems i n desi gnat ed ar ea f r ee f r om cont act wi t h soi l and weat her . Remove and r epl ace damaged i t ems wi t h new i t ems.

PART 2 PRODUCTS

2. 1 MATERIALS

Pr ovi de mat er i al s whi ch ar e t he st andar d pr oduct s of a manuf act ur er r egul ar l y engaged i n t he manuf act ur e of such pr oduct s. The mat er i al s pr ovi ded shal l be of a t ype wi t h pr oven sat i sf act or y usage f or at l east 2 years.

2. 1. 1 Metals

Fur ni sh met al component s wi t h f act or y dr i l l ed hol es and f r ee of excess wel d and spat t er . Met al component s wi t h hol es t hat wi l l not be f i l l ed by har dwar e or hi dden by ot her component s wi l l be r ej ect ed. St r uct ur al st eel pr oduct s shal l conf or m t o ASTM A36/ A36M, ASTM A500/ A500M and ASTM A501/ A501M.

2. 1. 2 St r uct ur al Tubi ng

ASTM A500/ A500M

2. 1. 3 St eel Pi pe and Fi t t i ngs

St eel pi pe shal l conf or m t o ASTM A53/ A53M, Type E or S, Gr ade B; st andar d mal l eabl e i r on f i t t i ngs shal l conf or m t o ASTM A47/ A47M.

2. 1. 4 Gr ay Cast I r on

Gr ay cast i r on shal l conf or m t o ASTM A48/ A48M Cl ass 35 or bet t er . Pr ovi de cast i ngs manuf act ur ed t r ue t o pat t er n and component par t s t hat f i t t oget her i n a sat i sf act or y manner . Cast i ngs shal l be of uni f or m qual i t y , f r ee f r om bl owhol es, por osi t y, har d spot s, shr i nkage, di st or t i on, or ot her def ect s.

Smoot h cast i ngs shal l be wel l - c l eaned by sand or shot bl ast i ng.

2. 1. 5 Cast Al umi num

Cast al umi num shal l conf or m t o ASTM B26/ B26M and ASTM B108/ B108M. Pr ovi de cast i ngs manuf act ur ed t r ue t o pat t er n and component par t s t hat f i t t oget her i n a sat i sf act or y manner . Pr ovi de cast i ngs of uni f or m qual i t y , f r ee f r om bl owhol es, por osi t y, har d spot s, shr i nkage, di st or t i on, or ot her def ect s.

Smoot h cast i ngs shal l be wel l - c l eaned by sand or shot bl ast i ng.

SECTI ON 12 93 00 Page 5

2. 1. 6 Al umi num Al l oy Pr oduct s

Conf or m t o ASTM B209 f or sheet pl at e, ASTM B221 f or ext r usi ons and ASTM B26/ B26M or ASTM B108/ B108M f or cast i ngs, as appl i cabl e. Pr ovi de al umi num ext r usi ons at l east 1/ 8 i nch t hi ck and al umi num pl at e or sheet at l east 0. 050 i nch t hi ck.

2. 1. 7 Anchor s and Har dwar e

Pr ovi de anchor s, wher e necessar y, f or f ast eni ng s i t e f ur ni shi ngs secur el y i n pl ace and i n accor dance wi t h appr oved manuf act ur er ' s i nst r uct i ons.

Anchor i ng devi ces t hat may be used, when no anchor s ar e ot her wi se speci f i ed or i ndi cat ed, i ncl ude anchor bol t s, s l ot t ed i nser t s, expansi on shi el ds f or concr et e; t oggl e bol t s and t hr ough bol t s f or masonr y; machi ne car r i age bol t s f or st eel ; and l ag bol t s and scr ews f or wood. Anchor bol t s shal l conf or m t o ASTM A307. Har dwar e shal l be gal vani zed st eel i n accor dance with ASTM A153/ A153M and compat i bl e wi t h t he mat er i al t o whi ch appl i ed.

Al l exposed har dwar e shal l mat ch i n col or and f i ni sh. Mount i ng har dwar e shal l be conceal ed, r ecessed, and pl ugged.

2. 1. 7. 1 Thr eaded I nser t s and Expansi on Anchor s

Pr ovi de i nser t s r ecessed not l ess t han 2. 5 i nches i nt o concr et e or masonr y. Pul l out 198 pounds i n concr et e wi t h f ' c of 3, 000 psi , as t est ed i n accor dance wi t h ASTM E488/ E488M. Expansi on shi el ds shal l conf or m t o CI D A- A- 1925, gr oup I I , t ype 4, c l ass 1. Pr ovi de embedment r equi r ed by manufacturer.

2. 1. 7. 2 Lag Scr ews and Bol t s

ASME B18. 2. 1, t ype and gr ade best sui t ed f or t he pur pose.

2. 1. 7. 3 Toggl e Bol t s

ASME B18. 2. 1.

2. 1. 7. 4 Bol t s, Nut s, St uds and Ri vet s

ASME B18. 2. 2 or ASTM A307.

2. 1. 7. 5 Power Dr i ven Fast ener s

Fol l ow saf et y pr ovi s i ons of ASSE/ SAFE A10. 3.

2. 1. 7. 6 Screws

ASME B18. 2. 1, ASME B18. 6. 2, and ASME B18. 6. 3.

2. 1. 7. 7 Washers

Pr ovi de pl ai n washer s t o conf or m t o ASME B18. 21. 1. Pr ovi de bevel ed washer s f or Amer i can St andar d beams and channel s, squar e or r ect angul ar , t aper ed i n t hi ckness, and smoot h. Pr ovi de l ock washer s t o conf or m t o ASME B18. 21. 1.

2. 1. 8 Ounce Met al s

Br onze, copper , and ot her ounce met al s shal l conf or m t o ASTM B62.

SECTI ON 12 93 00 Page 6

2. 1. 9 Concrete

Ready- mi xed concr et e shal l conf or m t o ASTM C94/ C94M, usi ng 3/ 4 i nch maxi mum si ze aggr egat e, and havi ng mi ni mum compr essi ve st r engt h of 3000 psi at 28 days. Por t l and cement shal l conf or m t o ASTM C150/ C150M. Rei nf or c i ng st eel shal l conf or m t o ASTM A615/ A615M. Wel ded wi r e f abr i c shal l conf or m t o

ASTM A1064/ A1064M.

2. 1. 10 Plastics

Recycl ed mat er i al s shal l cont ai n a mi ni mum 85 per cent r ecycl ed post - consumer pr oduct . Recycl ed mat er i al s shal l be const r uct ed or manuf act ur ed wi t h a maxi mum 1/ 4 i nch def l ect i on or cr eep i n any member i n conf or mance wi t h ASTM D648 and ASTM D2990. Pr ovi de panel s and component s mol ded of ul t r av i ol et ( UV) and col or st abi l i zed pol yet hyl ene, wi t h mi ni mum 1/ 4 i nch wal l t hi ckness; exposed edges shal l be smoot hed, r ounded, and f r ee of bur r s and poi nt s; and t he mat er i al shal l be r esi st ant t o f adi ng, cr acki ng, f oggi ng, and shat t er i ng. The mat er i al shal l be non- t oxi c and have no di scer ni bl e cont ami nat es such as paper , f oi l , or wood. The mat er i al shal l cont ai n no mor e t han 3 per cent ai r voi ds and be r esi st ant t o def or mat i on f r om sol ar r adi at i on heat gai n. Recycl ed mat er i al s t o i ncl ude pl ast i c l umber wi l l not be used as st r uct ur al component s of s i t e f ur ni shi ngs. Submi t a r epor t of s i t e f ur ni shi ng par t s consi st i ng of r ecycl ed mat er i al s. Pr oduct speci f i cat i on dat a, pr ovi di ng t est i nf or mat i on f or def l ect i on and cr eep i n accor dance wi t h ASTM D648 and ASTM D2990 f or s i t e f ur ni shi ngs whi ch use pl ast i c l umber as a component , shal l be submi t t ed. Pr ovi de dat a f or compar i son of def l ect i on and cr eep measur ement s t o ot her compar abl e mat er i al s.

2. 1. 11 Lumber

Pr ovi de pr emi um gr ade wood f r ee of knot s; boar ds wi t h eased edges and ends;

and wood component s wi t h f act or y dr i l l ed hol es. Component s wi t h hol es t hat wi l l not be f i l l ed by har dwar e or hi dden by ot her component s wi l l be r ej ect ed. Wood pr oduct s shal l be sel ect ed t o wi t hst and t he c l i mat i c condi t i ons of t he r egi on i n whi ch t he s i t e i s l ocat ed. Lumber gr ades shal l meet manuf act ur er s st andar ds of t he gr adi ng r ul es under whi ch t hey ar e manufactured.

2. 1. 11. 1 Moi st ur e Cont ent

Ai r - dr y or k i l n- dr y l umber . Ki l n- dr y t r eat ed l umber af t er t r eat ment .

Maxi mum moi st ur e cont ent of wood pr oduct s at t i me of del i ver y shal l be i n accor dance wi t h manuf act ur er s st andar d. I f no manuf act ur er ' s st andar d exi st s, t hen moi st ur e cont ent shal l be based on r equi r ement s f or t he pr oduct , gr ade and i nt ended use.

2. 1. 11. 2 Treatment

Wood t hat i s not nat ur al l y r ot and i nsect r esi st ant shal l be t r eat ed wi t h st andar d pr ocedur es. Cr eosot e, pent achl or ophenol , t r i but y l t i n oxi de shal l not be used i n conf or mance wi t h ASTM F1487. Ammoni um Copper Quat ( ACQ) shal l not be used f or sur f aces l i kel y t o cont act t he ski n of smal l chi l dr en. AWPA C1 and AWPA C9, as appl i cabl e, and i nspect ed i n accor dance with AWPA M2.

2. 1. 11. 3 Wood Seat s and Tabl e Tops

Cl ear t eak, mapl e, oak, Jar r ah, I pe or ot her sui t abl e har dwood, not l ess

SECTI ON 12 93 00 Page 7 t han 1- 5/ 8 i nches t hi ck wi t h r ounded edges.

2. 1. 12 Fiberglass

Fi ber gl ass shal l consi st of at l east 3 l ami nat i ons of chopped gl ass f i ber s i mpr egnat ed wi t h pol yest er r esi n, wi t h col or s and t ext ur es mol ded i nt o al l exposed sur f aces so t hat col or s r esi st f adi ng. Fi ber gl ass shal l be r esi st ant t o c l eaner s, f er t i l i zer s, hi gh power spr ay and sal t .

2. 2 PRETREATMENT, PRI MI NG AND PAI NTI NG

Appl y pr et r eat ment , pr i mer , and pai nt i n accor dance wi t h manuf act ur er ' s pr i nt ed i nst r uct i ons.

2. 2. 1 Nonf er r ous Met al Sur f aces

Pr ot ect by pl at i ng, anodi c, or or gani c coat i ngs.

2. 2. 2 Al umi num Sur f aces

Bef or e f i ni shes ar e appl i ed, r emove r ol l mar ks, scr at ches, r ol l ed- i n scr at ches, k i nks, st ai ns, pi t s, or ange peel , di e mar ks, st r uct ur al st r eaks, and ot her def ect s whi ch wi l l af f ect uni f or m appear ance of f i ni shed sur f aces.

2. 3 COATI NGS AND FI NI SHES

2. 3. 1 Galvanizing

Hot - di p gal vani ze i t ems speci f i ed t o be z i nc- coat ed, af t er f abr i cat i on wher e pr act i cabl e. Gal vani z i ng shal l conf or m t o ASTM A123/ A123M, ASTM A153/ A153M or ASTM A653/ A653M, as appl i cabl e. Tai l i ngs and shar p pr ot r usi ons f or med as a r esul t of t he hot - di p pr ocess shal l be r emoved and exposed edges bur ni shed. Gal vani ze anchor bol t s, gr at i ng f ast ener s, washer s and par t s or devi ces necessar y f or pr oper i nst al l at i on, unl ess ot her wi se i ndi cat ed.

2. 3. 2 Pol yest er Powder

Powder - coat ed sur f aces shal l r ecei ve el ect r ost at i c z i nc coat i ng pr i or t o pai nt i ng. Powder coat i ng shal l be el ect r ost at i cal l y appl i ed and oven cur ed. Pol yest er powder coat i ng shal l be r esi st ant t o ul t r avi ol et ( UV) light.

2. 3. 3 Pol yvi nyl - Chl or i de ( PVC)

PVC coat i ng shal l be pr i med wi t h a c l ear acr yl i c t her moset t i ng sol ut i on.

The pr i med par t s shal l be pr eheat ed pr i or t o di ppi ng. The l i qui d pol yvi nyl chl or i de shal l be ul t r avi ol et ( UV) st abi l i zed and mol d- r esi st ant . The coat ed par t s shal l be cur ed. The coat i ng shal l be a mi ni mum 2/ 25 i nches t hi ck pl us or mi nus 0. 020 i nches and shal l have an 85 dur omet er har dness wi t h a s l i p- r esi st ant f i ni sh.

2. 3. 4 Finish

Fi ni sh shal l be as speci f i ed by t he manuf act ur er or as i ndi cat ed. Exposed sur f aces and edges shal l be r ounded, pol i shed, or sanded. Fi ni sh shal l be non- t oxi c, non- gl ar e, and r esi st ant t o cor r osi on. Exposed sur f aces shal l be smoot h and spl i nt er - f r ee exposed sur f aces. Submi t t wo set s of col or dat a f or each f ur ni shi ng di spl ayi ng manuf act ur er ' s col or sel ect i ons and

SECTI ON 12 93 00 Page 8 f i ni shes, and i dent i f y i ng t hose col or s and f i ni shes pr oposed f or use.

2. 3. 4. 1 Wood Seal ant s

Exposed wood sur f aces shal l have, as a mi ni mum, t wo shop coat s of pai nt , var ni sh, seal er , or ot her appr oved pr eser vat i ve. Seal ant s shal l seal al l appl i ed sur f aces f r om ai r .

2. 3. 4. 2 Paint

Pai nt shal l be f act or y appl i ed wi t h a mi ni mum of 2 coat s. Pai nt shal l be weat her - r esi st ant and r esi st ant t o cr acki ng, peel i ng and f adi ng.

2. 3. 4. 3 Color

Col or of s i t e f ur ni shi ng component s shal l be i n accor dance wi t h t he dr awi ngs.

2. 4 SI TE STANDARDS

Si t e f ur ni shi ngs shal l be f ur ni shed wi t h t he di mensi ons and r equi r ement s i ndi cat ed. Si t e f ur ni shi ngs pl aced i n chi l dr en' s out door pl ay ar eas shal l meet t he saf et y r equi r ement s of ASTM F1487 f or ent r apment ; shar p poi nt s, edges, and pr ot r usi ons; ent angl ement ; pi nch, cr ush, and shear poi nt s. Si t e f ur ni shi ngs t o be i ncl uded i n chi l dr en' s out door pl ay ar eas shal l be f r ee f r om shar p ver t i cal edges and any pr ot r udi ng el ement s and desi gned wi t h a mi ni mum r adi us of 1/ 2 i nch on al l ver t i cal edges; t hi s i ncl udes, but i s not l i mi t ed t o, seat wal l s, cont ai nment cur bs and pl ant er s. Wher e pr act i cal , hor i zont al edges exposed t o chi l dr en' s act i v i t i es shal l be r ounded.

2. 5 BENCHES AND CHAI RS

Fur ni sh benches and chai r s wi t h no shar p edges or pr ot r udi ng har dwar e.

a. Hei ght : The hei ght above f i ni shed gr ade or speci f i ed sur f ace shal l be bet ween 18- 20 i nches and l evel .

b. Seat : The seat sur f ace shal l be pi t ched or s l ot t ed t o shed wat er ; t he seat dept h shal l be bet ween 12- 18 i nches and pi t ched down at t he back at a 0- 5 degr ee angl e. Seat shal l have a mi ni mum wi dt h of 24 i nches per per son, and shal l over hang t he suppor t base by a mi ni mum of 4 i nches f or heel space and t o f aci l i t at e r i s i ng f r om a seat i ng posi t i on.

c. Back Rest : When back r est s ar e r equi r ed, t he hei ght shal l be bet ween 15- 18 i nches f r om t he t op of t he seat and t he connect i on shal l be at a 90- 110 degr ee angl e t o t he seat .

d. Ar m Rest : When ar m r est s ar e r equi r ed, a mi ni mum of 6 i nches hei ght f r om t he seat and a mi ni mum ar m r est wi dt h of 1- 1/ 2 i nches shal l be provided.

e. Wei ght Li mi t : Seat s shal l suppor t a mi ni mum 300 l bs f or each per son t hey ar e desi gned t o accommodat e.

2. 5. 1 Accessories

Pr ovi de manuf act ur er ' s st andar d mat er i al s and accessor i es as r equi r ed f or assembl y of uni t s and as i ndi cat ed on t he assembl y dr awi ngs. Pr ovi de unexposed al umi num, st ai nl ess st eel or st eel pl at es, angl es and suppor t s as r equi r ed f or compl et e assembl y. Separ at e di ssi mi l ar mat er i al s t o pr event

SECTI ON 12 93 00 Page 9 el ect r ol yt i c act i on.

2. 5. 2 Fasteners

Pr ovi de conceal ed f ast ener s except wher e speci f i cal l y appr oved; t ypes as r equi r ed f or speci f i c usage.

2. 5. 3 Anchor i ng Br acket s

Pr ovi de 1/ 4 i nch z i nc pl at ed st eel angl e anchor i ng br acket s, 1- 7/ 8 i nch wi de by 2 i nches deep by 2- 1/ 2 i nches hi gh, pr e- dr i l l ed f or bol t i ng benches t o subst r at e.

2. 6 BI CYCLE RACKS

Desi gn bi cycl e r acks ( st anchi ons) i n accor dance wi t h manuf act ur er ' s st andar ds and t o meet desi gn condi t i ons i ndi cat ed. Locat e as shown on t he dr awi ngs. Pr ovi de powder coat f i ni sh i n col or as sel ect ed f r om manuf act ur er ' s st andar ds. Racks shal l accommodat e l ocki ng devi ces and secur e, as a mi ni mum, one wheel and par t of t he f r ame si mul t aneousl y. The spaci ng bet ween r acks shal l be a mi ni mum of 24 i nches.

2. 6. 1 Met al Pi pe Bi cycl e Racks

Provide ASTM A53/ A53M schedul e 40 st eel pi pe bi cycl e r acks i n conf i gur at i on and of 2- 1/ 2 i nch pi pe s i ze. Type of mount i ng, bi cycl e r ack capaci t y and hei ght above t he gr ound as shown on t he dr awi ngs.

2. 7 WASTE RECEPTACLES

Pr ovi de f or wast e r ecept acl es and r emovabl e semi - r i gi d pl ast i c l i ner i nser t .

Wast e r ecept acl es shal l be f ur ni shed wi t h weat her pr ot ect i on, odor cont ai nment , and i nsect / ani mal - pr oof i ng. Cont ai ner s i ze shal l be as i ndi cat ed on pl ans.

2. 7. 1 Height

Tr ash and l i t t er deposi t openi ngs shal l be bet ween 30- 40 i nches above t he ground.

2. 7. 2 Liners

Tr ash and l i t t er r ecept acl es shal l be f ur ni shed wi t h r emovabl e/ r eusabl e i nner cont ai ner s. Sel f - dumpi ng t ype desi gns t o i ncl ude hi nged bot t om, t op or s i des wi l l be r ej ect ed.

2. 7. 3 Anchors

Tr ash and l i t t er r ecept acl es t hat can be anchor ed t o r esi st over t ur ni ng by t ypi cal use, hi gh wi nds, or ani mal s shal l be f ur ni shed and anchor ed i n accor dance wi t h t he manuf act ur er ' s r ecommendat i ons.

2. 7. 4 Openings

Openi ngs f or t r ash and l i t t er i nser t i on shal l be a mi ni mum of 4 i nches i n di amet er . Edges of t he openi ngs shal l be cr i mped, r ounded and smoot hed.

SECTI ON 12 93 00 Page 10

2. 7. 5 Met al Wast e Recept acl e

Pr ovi de met al wast e r ecept acl es as i ndi cat ed, powder coat f i ni sh, col or as selected.

a. Met al t hi ckness, wi dt h, and conf i gur at i on shal l be manuf act ur er ' s st andar d. Chemi cal l y c l ean and phosphat e coat pr i or t o f i nal powdercoat.

2. 8 SHELTERS

AI SC 360. Pr ovi de pr ef abr i cat ed shel t er syst ems t o meet desi gn condi t i ons i ndi cat ed. Shel t er desi gn shal l conf or m t o al l appl i cabl e St at e and Local Bui l di ng Codes and shal l meet manuf act ur er ' s st andar ds of const r uct i on and mat er i al s. Shel t er syst ems shal l be pr e- dr i l l ed and pr e- cut , shi pped wi t h al l har dwar e and accessor i es necessar y f or compl et e f i el d assembl y.

2. 9 TABLES

Pi cni c t abl es shal l be f ur ni shed wi t h at t ached benches t hat have no backr est s. Tabl e' s exposed edges and cor ner s shal l be r ounded, eased or chamfered.

2. 9. 1 Height

Bet ween 29- 48 i nches f r om t he f i ni shed gr ade t o t he l owest sur f ace of t he t op, or as not ed.

2. 9. 2 Clearance

A mi ni mum ver t i cal c l ear ance of 9 i nches bet ween t he seat t op and t he bot t om edge of t he t abl e t op shal l be pr ovi ded. A mi ni mum of 18 i nches of l eg space under t abl es, measur ed f r om t he i nsi de edge of t he seat t op t o t he near est t abl e suppor t , shal l be pr ovi ded. A mi ni mum of 18 i nches f r om t he end of t he t abl e t op t o t he near est suppor t l eg shal l be pr ovi ded.

2. 9. 3 Top

Tabl e t op sur f aces shal l not cont ai n r ecesses t hat mi ght hol d wat er or f ood par t i c l es. The t abl e t op wi dt h shal l be a mi ni mum of 18 i nches when ut i l i zed f r om one si de onl y, and a mi ni mum of 36 i nches when ut i l i zed f r om t wo si des. The t abl e t op l engt h shal l be a mi ni mum of 24 i nches per per son.

2. 9. 4 Wheel chai r Access

A mi ni mum cl ear space of 29 i nches f r om t he f i ni shed gr ade t o t he under si de of t he t abl e shal l be pr ovi ded f or per sons wi t h di sabi l i t y t o be abl e t o pul l a wheel chai r beneat h t he t abl e t op at t he end of t he t abl e; t he mi ni mum cl ear wi dt h shal l be 34 i nches.

PART 3 EXECUTI ON

3. 1 CHI LDREN' S PLAY AREAS

I nst al l t he s i t e f ur ni shi ngs out s i de t he pl ay st r uct ur e use zone i n accor dance wi t h ASTM F1487. Ver i f y and mar k t he l ocat i ons of t he use zone. These zones ar e t o be f r ee f r om obst acl es and har d sur f aces. When chi l d accessi bi l i t y r equi r ement s ar e t o be met , chi l d ant hr opomet r i c di mensi ons must be used and not adul t ant hr opomet r i c di mensi ons.

SECTI ON 12 93 00 Page 11

3. 2 INSTALLATION

Ver i f y t hat f i ni shed gr ades and ot her oper at i ons af f ect i ng mount i ng sur f aces have been compl et ed pr i or t o t he i nst al l at i on of s i t e f ur ni shi ngs. Si t e f ur ni shi ngs shal l be i nst al l ed pl umb and t r ue, at l ocat i ons i ndi cat ed, i n accor dance wi t h t he appr oved manuf act ur er ' s instructions.

3. 2. 1 Assembl y and Er ect i on of Component s

New par t s shal l be acqui r ed f r om t he manuf act ur er ; subst i t ut e par t s wi l l not be accept ed unl ess appr oved by t he manuf act ur er . When t he i nspect i on of par t s has been compl et ed, t he s i t e f ur ni shi ngs shal l be assembl ed and anchor ed accor di ng t o manuf act ur er ' s i nst r uct i ons or as i ndi cat ed. When si t e f ur ni shi ngs ar e assembl ed at t he s i t e, assembl y shal l not i nt er f er e wi t h ot her oper at i ons or pedest r i an and vehi cul ar c i r cul at i on.

3. 2. 2 Anchor age, Fast eni ngs, and Connect i ons

Fur ni sh met al wor k, mount i ng bol t s or har dwar e i n ampl e t i me f or secur i ng i nt o concr et e or masonr y as t he wor k pr ogr esses. Pr ovi de anchor age wher e necessar y f or f ast eni ng f ur ni t ur e or f ur ni shi ngs secur el y i n pl ace.

Pr ovi de, f or anchor age not ot her wi se speci f i ed or i ndi cat ed, s l ot t ed i nser t s, expansi on shi el ds, and power - dr i ven f ast ener s, when appr oved f or concr et e; t oggl e bol t s and t hr ough bol t s f or masonr y; machi ne and car r i age bol t s f or st eel ; t hr ough bol t s, l ag bol t s, and scr ews f or wood. Do not use wood pl ugs i n any mat er i al . Pr ovi de non- f er r ous at t achment s f or non- f er r ous met al . Make exposed f ast eni ngs of compat i bl e mat er i al s , gener al l y mat chi ng i n col or and f i ni sh t he f ast eni ngs t o whi ch t hey ar e appl i ed. Conceal f ast eni ngs wher e pr act i cabl e.

3. 3 WELDING

Per f or m wel di ng, wel di ng i nspect i on, and cor r ect i ve wel di ng, i n accor dance with AWS D1. 1/ D1. 1M. Use cont i nuous wel ds on al l exposed connect i ons.

Gr i nd v i s i bl e wel ds smoot h i n t he f i ni shed i nst al l at i on.

3. 4 TESTING

Test each si t e f ur ni shi ng t o ascer t ai n a secur e and cor r ect i nst al l at i on.

A cor r ect i nst al l at i on shal l be accor di ng t o t he manuf act ur er ' s r ecommendat i ons and by t he f ol l owi ng pr ocedur e: Measur e t he physi cal di mensi ons and c l ear ance of each i nst al l ed s i t e f ur ni shi ng f or compl i ance wi t h manuf act ur er ' s r ecommendat i ons and as i ndi cat ed. Si t e f ur ni shi ngs whi ch do not compl y shal l be r ei nst al l ed. Fast ener s and anchor s det er mi ned t o be non- compl i ant shal l be r epl aced. Submi t a wr i t t en r epor t descr i bi ng t he r esul t s of t he t est i ng and a r epor t of post - i nst al l at i on t est r esul t s.

3. 5 FINISHES

3. 5. 1 Fi el d Fi ni shes

Wher e di ssi mi l ar met al s ar e i n cont act , pr ot ect sur f aces wi t h a coat conf or mi ng t o SSPC Pai nt 25 t o pr event gal vani c or cor r osi ve act i on. Wher e al umi num i s i n cont act wi t h concr et e, mor t ar , masonr y, wood, or absor pt i ve mat er i al s subj ect t o wet t i ng, pr ot ect wi t h ASTM D1187/ D1187M, asphal t - base emulsion.

SECTI ON 12 93 00 Page 12

3. 5. 2 Repai r of Zi nc- Coat ed Sur f aces

Repai r damaged sur f aces wi t h gal vani z i ng r epai r met hod and pai nt conf or mi ng to ASTM A780/ A780M or by t he appl i cat i on of st i ck or t hi ck past e mat er i al speci f i cal l y desi gned f or r epai r of gal vani z i ng, as appr oved by t he Cont r act i ng Of f i cer . Cl ean ar eas t o be r epai r ed and r emove t he s l ag f r om t he wel ds. Heat sur f aces t o whi ch st i ck or past e mat er i al i s appl i ed, wi t h a t or ch t o a t emper at ur e suf f i c i ent t o mel t t he met al l i cs i n st i ck or past e; spr ead t he mol t en mat er i al uni f or ml y over sur f aces t o be coat ed and wi pe t he excess mat er i al of f .

3. 6 BI CYCLE RACKS

Af f i x t o base st r uct ur e by f l anges anchor ed t o concr et e or ot her exi st i ng masonr y by expansi on shi el ds. Pr ovi de Ser i es 300 st ai nl ess st eel bol t s t o anchor al umi num al l oy f l anges, of a s i ze appr opr i at e t o t he st andar d pr oduct of t he manuf act ur er . Wher e al umi num or al l oy f i t t i ngs or ext r usi ons ar e t o be i n cont act wi t h di ssi mi l ar met al s or concr et e, gi ve t he cont act sur f ace a heavy coat i ng of bi t umi nous pai nt .

3. 7 RESTORATI ON AND CLEAN UP

When t he i nst al l at i on has been compl et ed, c l ean up…