W912CH25R0142-0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0001 2026MAR24

W912CH

ACC-DTA

6501 E. 11 MILE RD.

DETROIT ARSENAL, MI 48397-5000

NICHOLAS LANG

EMAIL: NICHOLAS.A.LANG.CIV@ARMY.MIL

W912CH-25-R-0142

2026FEB09

X

X 2026APR10 03:30pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 23

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: NICHOLAS LANG

Buyer Office Symbol/Telephone Number: CCTA-APS-C/(571)588-9166

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

Weapon System: BFVS(M2, M2A1, M2A2),BFVS(M3, M3A1,M3A2)

*** End of Narrative A0000 ***

Solicitation: W912CH-25-R-0142

Amendment:0001

1. The purpose of this Amendment 0001 to Solicitation W912CH-25-R-0142 is to incorporate mandatory clauses, align the solicitation with recent Federal Acquisition Regulation (FAR) updates, and revise the delivery schedule requirements.

2. As a result of this amendment, the following changes are made:

I. SF-33

a) The proposal due date is hereby extended thirty (30) calendar days, from March 11, 2026, to April 10, 2026.

II. SECTION E

b) The following clause is added to the solicitation:

- FAR 52.246-11, Higher-Level Contract Quality Requirement.

II. SECTION F

c) This section is revised in its entirety to update delivery schedule instructions and provide offerors with the opportunity to propose an alternative delivery schedule.

d) The following clauses are deleted from the solicitation:

- FAR 52.211-17, Delivery of Excess Quantities; and

- FAR 52.211-8, Time of Delivery.

III. SECTION I

e) The following clauses are added to the solicitation:

- DFARS 252.227-7991, Rights in Bid or Proposal Information;

- DFARS 252.227-7994, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends;

- FAR 52.204-91, Contractor Identification;

- FAR 52.240-91, Security Prohibitions and Exclusions;

- FAR 52.240-93, Basic Safeguarding and Covered Contractor Information Systems; and

- FAR 52.246-26, Reporting of Nonconforming Items.

f) The following clauses are deleted from the solicitation:

- FAR 52.204-18, Commercial and Government Entity Code Maintenance;

- FAR 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab or Other

Covered Entities;

- FAR 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment;

2 23

W912CH-25-R-0142

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

- FAR 52.204-27, Prohibition on a ByteDance Covered Application;

- FAR 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts;

- FAR 52.215-2, Audit and Records-Negotiation;

- FAR 52.225-13, Restrictions on Certain Foreign Purchases; and

- FAR 52.253-1, Computer Generated Forms.

IV. SECTION K

g) The following clauses are added to the solicitation:

- FAR 52.204-90, Offeror Identification; and

- FAR 52.240-90, Security Prohibitions and Exclusions Representations and Certifications.

h) The following clauses are deleted from the solicitation:

- FAR 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment;

- FAR 52.204-8, Annual Representations and Certifications;

- FAR 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan Certification; and

- FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities Relating to Iran - Representation and

Certifications.

V. SECTION L

i) The following clauses are deleted from the solicitation:

- FAR 52.204-6, Unique Entity Identifier;

- FAR 52.204-16, Commercial and Government Entity Code Reporting;

- FAR 52.204-22, Alternative Line Item Proposal;

- FAR 52.211-1, Availability of Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item

Descriptions, FPMR Part 101-29; and

- FAR 52.211-2, Availability of Specifications Listed in the DODISS and Descriptions Listed in the Acquisition Management Systems and

Data Requirements Control List, DOD 5010.12-L.

j) Section L is revised to correspond with the updated Section F delivery schedule instructions.

VI. SECTION M

k) Section M is revised to reflect the evaluation of the offeror's proposed delivery schedule in accordance with the updated Section F.

This concludes all Sections affected by this amendment.

3. Offerors shall acknowledge this amendment by signing and returning the cover page with their proposal by the solicitation closing date.

4. All other terms and conditions of Solicitation W912CH-25-R-0142 remain unchanged.

*** END OF NARRATIVE A0002 ***

3 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

4 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION F - DELIVERIES OR PERFORMANCE

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

F-1 DELETED 52.211-17 DELIVERY OF EXCESS QUANTITIES SEP/1989

F-2 DELETED 52.211-8 TIME OF DELIVERY JUN/1997

F.1 DELIVERY

F.1.1 Supplies shall be delivered F.O.B. Destination to: Texarkana, TX.

F.2 DELIVERY SCHEDULE

F.2.1 Definitions:

F.2.1.1 DAC (Days After Contract Award): The number of calendar days after the date of contract award. This applies to the base requirement, CLIN 0001AA.

F.2.1.2 DAEO (Days After Exercise of Option): The number of calendar days after the date the Government issues the modification exercising an option. This applies to the unexercised option requirement, CLIN 0002AA.

F.2.2 Government Solicited Delivery Schedule:

F.2.2.1 The Contractor shall complete delivery of the total quantity for each CLIN in accordance with the following schedule:

a. CLIN 0001AA: No later than 240 Days After Contract Award (DAC).

b. CLIN 0002AA: No later than 240 Days After Exercise of Option (DAEO).

F.2.2.2 No specific delivery quantities per month are required within the contract delivery period for either CLIN.

F.2.3 Offeror Proposed Delivery Schedule:

F.2.3.1 Offerors may propose a delivery schedule accelerated from the Government's required schedule at no additional cost to the

Government.

F.2.3.2 Offerors proposing an accelerated schedule shall complete the following. If this section is not completed, the offeror is deemed to have proposed the Government's solicited schedule specified in F.2.2.1.

CLIN Quantity Proposed Completion of Delivery

0001AA 110 Each _______ (DAC)

0002AA 110 Each _______ (DAEO)

*** END OF NARRATIVE F0001 ***

5 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION I - CONTRACT CLAUSES

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

I-1 DELETED 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE AUG/2020

I-2 DELETED 52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEC/2023

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED ENTITIES

(DEC 2023)

I-3 DELETED 52.204-28 Federal Acquisition Supply Chain Security Act Orders?Federal Supply DEC/2023

Schedules, Governmentwide Acquisition Contracts, and Multi-Agency

Contracts (Dec 2023)

I-4 ADDED 52.204-91 CONTRACTOR IDENTIFICATION (FEB 2026) FEB/2026

I-5 DELETED 52.215-2 AUDIT AND RECORDS--NEGOTIATION (FEB 2026) FEB/2026

I-6 CHANGED 52.222-37 EMPLOYMENT REPORTS ON VETERANS (FEB 2026) FEB/2026

I-7 CHANGED 52.222-50 COMBATING TRAFFICKING IN PERSONS ((FEB 2026) FEB/2026

I-8 CHANGED 52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (FEB 2026) FEB/2026

I-9 DELETED 52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES FEB/2021

I-10 CHANGED 52.233-1 DISPUTES (FEB 2026) FEB/2026

I-11 CHANGED 52.233-3 PROTEST AFTER AWARD (FEB 2026) FEB/2026

I-12 CHANGED 52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (FEB 2026) FEB/2026

I-13 ADDED 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (FEB 2026) FEB/2026

I-14 DELETED 52.253-1 COMPUTER GENERATED FORMS FEB/2026

I-15 DELETED 52.204-30 Federal Acquisition Supply Chain Security Act Orders?Prohibition (Dec DEC/2023

2023)

I-16 DELETED 52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO NOV/2021

SURVEILLANCE SERVICES OR EQUIPMENT

I-17 DELETED 52.204-27 Prohibition on a ByteDance Covered Application (Jun 2023) JUN/2023

I-18 CHANGED 52.222-19 CHILD LABOR--COOPERATION WITH AUTHORITIES AND REMEDIES (FEB 2026) FEB/2026

(a) Applicability. This clause does not apply to the extent that the Contractor is supplying end products mined, produced, or manufactured in--

(1) Israel, and the anticipated value of the acquisition is $50,000 or more;

(2) Mexico, and the anticipated value of the acquisition is $102,280 or more; or

(3) Armenia, Aruba, Australia, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Italy, Japan, Korea, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, North Macedonia, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, Ukraine, or the United Kingdom and the anticipated value of the acquisition is $174,000 or more.

(b) Cooperation with Authorities. To enforce the laws prohibiting the manufacture or importation of products mined, produced, or manufactured by forced or indentured child labor, authorized officials may need to conduct investigations to determine whether forced or indentured child labor was used to mine, produce, or manufacture any product furnished under this contract. If the solicitation includes the provision 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products, the Contractor agrees to cooperate fully with authorized officials of the contracting agency, the Department of the Treasury, or the Department of Justice by providing reasonable access to records, documents, persons, or premises upon reasonable request by the authorized officials.

(c) Violations. The Government may impose remedies set forth in paragraph (d) for the following violations:

(1) The Contractor has submitted a false certification regarding knowledge of the use of forced or indentured child labor for listed end products.

(2) The Contractor has failed to cooperate, if required, in accordance with paragraph (b) of this clause, with an investigation of the use of forced or indentured child labor by an Inspector General, Attorney General, or the Secretary of the Treasury.

(3) The Contractor uses forced or indentured child labor in its mining, production, or manufacturing processes.

(4) The Contractor has furnished under the contract end products or components that have been mined, produced, or manufactured wholly or in part by forced or indentured child labor. (The Government will not pursue remedies at paragraph (d)(2) or paragraph (d)(3) of this clause unless sufficient evidence indicates that the Contractor knew of the violation.)

(d) Remedies.(1) The Contracting Officer may terminate the contract.

6 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(2) The suspending and debarring official may suspend the Contractor in accordance with procedures in FAR subpart 9.4.

(3) The suspending and debarring official may debar the Contractor for a period not to exceed 3 years in accordance with the procedures in FAR subpart 9.4.

(End of clause)

I-19 CHANGED 52.222-35 EQUAL OPPORTUNITY FOR VETERANS (FEB 2026) FEB/2026

(a) Definitions. As used in this clause--

"Active duty wartime or campaign badge veteran," "Armed Forces service medal veteran," "disabled veteran," "protected veteran,"

"qualified disabled veteran," and "recently separated veteran" have the meanings given at Federal Acquisition Regulation (FAR) 22.1301.

(b) Equal opportunity requirements. The Contractor must abide by the requirements of 38 U.S.C. 4212(a)(1) and (2). These requirements prohibit discrimination against qualified protected veterans, and requires affirmative action by the Contractor to employ and advance in employment qualified protected veterans.

(c) Subcontracts. The Contractor must insert the terms of this clause in subcontracts valued at or above the threshold specified in FAR

22.1302-1(a)(2) on the date of subcontract award, unless exempted by rules, regulations, or orders of the Secretary of Labor. The

Contractor must act as specified by the Director, Office of Federal Contract Compliance Programs, to enforce the terms, including action for noncompliance. Such necessary changes in language may be made as shall be appropriate to identify properly the parties and their undertakings.

(End of clause)

I-20 CHANGED 52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (FEB 2026) FEB/2026

(a)Equal opportunity clause. The Contractor must abide by the requirements of the equal opportunity clause at41 CFR 60-741.5(a), as of

March 24, 2014. This clause prohibits discrimination against qualified individuals on the basis of disability, and requires affirmative action by the Contractor to employ and advance in employment qualified individuals with disabilities.

(b)Subcontracts. The Contractor must include the terms of this clause in every subcontract or purchase order in excess of the threshold specified in Federal Acquisition Regulation (FAR) 22.1401-2(a)(1) on the date of subcontract award, unless exempted by rules, regulations, or orders of the Secretary, so that such provisions will be binding upon each subcontractor or vendor. The Contractor must act as specified by the Director, Office of Federal Contract Compliance Programs of the U.S. Department of Labor, to enforce the terms, including action for noncompliance. Such necessary changes in language may be made as shall be appropriate to identify properly the parties and their undertakings.

(End of clause)

I-21 CHANGED 52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (FEB 2026) FEB/2026

(a) "Hazardous material," as used in this clause, includes any material defined as hazardous under the latest version of Federal

Standard No. 313 (including revisions adopted during the term of the contract).

(b)The Offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or

Special Item Number. This information shall also be included on the Safety Data Sheet submitted under this contract.

Material (if none, insert None) Identification No.

(c)This list must be updated during performance of the contract whenever the Contractor determines that any other material to be

7 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

delivered under this contract is hazardous.

(d)The apparently successful offeror agrees to submit, for each item as required prior to award, a Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Safety Data Sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award.

(e)If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting

Officer and resubmit the data.

(f)Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property.

(g)Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material.

(h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows:

(1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to --

(i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials;

(ii) Obtain medical treatment for those affected by the material; and

(iii) Have others use, duplicate, and disclose the data for the Government for these purposes.

(2) To use, duplicate, and disclose data furnished under this clause, in accordance with subparagraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data.

(3) The Government is not precluded from using similar or identical data acquired from other sources.

(End of Clause) r

I-22 CHANGED 52.223-11 OZONE-DEPLETING SUBSTANCES (FEB 2026) FEB/2026

(a) Definition. As used in this clause

Ozone-depleting substance means any substance the Environmental Protection Agency designates in 40 CFR part 82 as

(1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or

(2) Class II, including, but not limited to, hydrochlorofluorocarbons.

(b) Requirement. In accordance with 40 CFR 82.84(a)(5), the Contractor shall label products that contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j(b), (c), (d), and (e) and 40 CFR part 82, subpart E, as follows:

Warning: Contains (or manufactured with, if applicable) *_______, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.

* The Contractor shall insert the name of the substance(s).

(End of clause)

I-23 ADDED 52.240-93 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEM (FEB FEB/2026

2026)

8 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(a)Definitions. As used in this clause

Covered contractor information system means an information system that is owned or operated by a contractor that processes, stores, or transmits Federal contract information.

Federal contract information

(1)Means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government; but

(2)Does not include information provided by the Government to the public (such as on public websites) or simple transactional information (such as information necessary to process payments).

Information means any communication or representation of knowledge such as facts, data, or opinions, in any medium or form, including textual, numerical, graphic, cartographic, narrative, or audiovisual (Committee on National Security Systems

Instruction (CNSSI) 4009).

Information system means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information (44 U.S.C. 3502).

Safeguarding means measures or controls that are prescribed to protect information systems.

(b)Safeguarding requirements.

(1)Basic requirements. The Contractor shall safeguard its covered contractor information systems by implementing, at minimum, the following security controls:

(i)Limit information system access to authorized users, processes acting on behalf of authorized users, or devices

(including other information systems).

(ii)Limit information system access to the types of transactions and functions that authorized users are permitted to execute.

(iii)Verify and control/limit connections to and use of external information systems.

(iv)Control information posted or processed on publicly accessible information systems.

(v)Identify information system users, processes acting on behalf of users, or devices.

(vi)Authenticate (or verify) the identities of those users, processes, or devices, as a prerequisite to allowing access to organizational information systems.

(vii)Sanitize or destroy information system media containing Federal Contract Information before disposal or release for reuse.

(viii)Limit physical access to organizational information systems, equipment, and the respective operating environments to authorized individuals.

(ix)Escort visitors and monitor visitor activity; maintain audit logs of physical access; and control and manage physical access devices.

(x)Monitor, control, and protect organizational communications (i.e., information transmitted or received by organizational information systems) at the external boundaries and key internal boundaries of the information systems.

(xi)Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.

(xii)Identify, report, and correct information and information system flaws in a timely manner.

(xiii)Provide protection from malicious code at appropriate locations within organizational information systems.

(xiv)Update malicious code protection mechanisms when new releases are available.

(xv)Perform periodic scans of the information system and real-time scans of files from external sources as files are

9 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

downloaded, opened, or executed.

(2)Other requirements. This clause does not relieve the Contractor of any other specific safeguarding requirements specified by

Federal departments and agencies relating to covered contractor information systems generally or other Federal safeguarding requirements for controlled unclassified information (CUI) as established by Executive Order 13556.

(c)Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (c), in subcontracts under this contract (including subcontracts for the acquisition of commercial products, other than commercially available off-the-shelf items, or commercial services), in which the subcontractor may have Federal contract information residing in or transiting through its information system.

(End of clause)

I-24 ADDED 252.227-7991 RIGHTS IN BID OR PROPOSAL INFORMATION ((DEVIATION 2026-O0036) FEB/2026

(FEB 2026)

(a) Definitions. As used in this clause

"Computer software" is defined in

(1) The 252.227-7989, Rights in Technical Data, Computer Software, and Computer Software DocumentationOther Than Commercial Products and

Commercial Services, clause of this contract; or

(2) If this is a contract awarded under the Small Business Innovation Research Program or Small Business Technology Transfer Program, the 252.227-7993, Rights in Other Than Commercial Technical Data and Computer SoftwareSmall Business Innovation Research Program and

Small Business Technology Transfer Program, clause of this contract.

"Technical data" is defined in

(1) The 252.227-7989, Rights in Technical Data, Computer Software, and Computer Software DocumentationOther Than Commercial Products and

Commercial Services, clause of this contract; or

(2) If this is a contract awarded under the Small Business Innovation Research Program or Small Business Technology Transfer Program, the 252.227-7993, Rights in Other Than Commercial Technical Data and Computer SoftwareSmall Business Innovation Research Program and

Small Business Technology Transfer Program, clause of this contract.

(b) Government rights before contract award. By submission of its offer, the Offeror agrees that the Government

(1) May reproduce the bid or proposal, or any portions thereof, to the extent necessary to evaluate the offer.

(2) Except as provided in paragraph (d) of this clause, will use information contained in the bid or proposal only for evaluation purposes and will not disclose, directly or indirectly, such information to any person including potential evaluators, unless that person has been authorized by the head of the agency, his or her designee, or the Contracting Officer to receive such information.

(c) Government rights after contract award. The Contractor agrees

(1) Except as provided in paragraphs (c)(2), (d), and (e) of this clause, the Government has the rights to use, modify, reproduce, release, perform, display, or disclose information contained in the Contractor's bid or proposal within the Government. The Government will not release, perform, display, or disclose such information outside the Government without the Contractor's written permission.

(2) The Government's right to use, modify, reproduce, release, perform, display, or disclose information that is technical data or computer software the Contractor must deliver under this contract are determined by the Defense Federal Acquisition Regulation

Supplement (DFARS) 252.227-7989, Rights in Technical Data, Computer Software, and Computer Software DocumentationOther Than Commercial

Products and Commercial Services; ; or DFARS 252.227-7993, Rights in Other Than Commercial Technical Data and Computer SoftwareSmall

Business Innovation Research Program and Small Business Technology Transfer Program, clause of this contract.

(d) Government-furnished information. The Government's rights with respect to Government-furnished technical data or computer software contained in the Contractor's bid or proposal are subject only to restrictions on use, modification, reproduction, release, performance, display, or disclosure, if any, imposed by the developer or licensor of such data or software.

(e) Information available without restrictions. The Government's rights to use, modify, reproduce, release, perform, display, or, disclose information contained in a bid or proposal, including technical data or computer software, and to permit others to do so, shall not be restricted in any manner if such information has been released or disclosed to the Government or to other persons without restrictions other than a release or disclosure resulting from the sale, transfer, or other assignment of interest in the information to another party or the sale or transfer of some or all of a business entity or its assets to another party.

10 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(f) Flowdown. Contractor shall include this clause in all subcontracts or similar contractual instruments and require its subcontractors or suppliers to do so without alteration, except to identify the parties.

(End of clause)

I-25 ADDED 252.227-7994 LIMITATIONS ON THE USE OR DISCLOSURE OF GOVERNMENT-FURNISHED FEB/2026

INFORMATION MARKED WITH RESTRICTIVE LEGENDS

(DEVIATION 2026-O0036) (FEB 2026)

(a) Definitions. As used in this clause

(1) For contracts in which the Government will furnish the Contractor with technical data, the terms "covered Government support contractor," "limited rights," "restricted rights", and "Government purpose rights" are defined in the clause at 252.227-7989, Rights in

Technical Data, Computer Software, and Computer Software DocumentationOther Than Commercial Products and Commercial Services.

(2) For Small Business Innovation Research (SBIR) Program and Small Business Technology Transfer (STTR) Program contracts, the terms

"covered Government support contractor," "government purpose rights," "limited rights," "restricted rights," and "SBIR/STTR data rights" are defined in the clause at 252.227-7993, Rights in Other Than Commercial Technical Data and Computer SoftwareSmall Business Innovation

Research Program and Small Business Technology Transfer Program.

(b) Technical data or computer software provided to the Contractor as Government-furnished information (GFI) under this contract may be subject to restrictions on use, modification, reproduction, release, performance, display, or further disclosure.

(1) GFI marked with limited rights, restricted rights, or SBIR/STTR data rights legends. (i) The Contractor shall use, modify, reproduce, perform, or display technical data received from the Government with limited rights legends, computer software received with restricted rights legends, or SBIR/STTR technical data or computer software received with SBIR/STTR data rights legends (during the

SBIR/STTR data protection period) only in the performance of this contract. The Contractor shall not, without the express written permission of the party whose name appears in the legend, release or disclose such data or software to any unauthorized person.

(ii) If the Contractor is a covered Government support contractor, the Contractor is also subject to the additional terms and conditions at paragraph (b)(5) of this clause.

(2) GFI marked with government purpose rights legends. The Contractor shall use technical data or computer software received from the

Government with government purpose rights legends for government purposes only. The Contractor shall not, without the express written permission of the party whose name appears in the restrictive legend, use, modify, reproduce, release, perform, or display such data or software for any commercial purpose or disclose such data or software to a person other than its subcontractors, suppliers, or prospective subcontractors or suppliers, who require the data or software to submit offers for, or perform, contracts under this contract. Prior to disclosing the data or software, the Contractor shall require the persons to whom disclosure will be made to complete and sign the nondisclosure agreement at 227.7103-7 of the Defense Federal Acquisition Regulation Supplement (DFARS).

(3) GFI marked with specially negotiated license rights legends. (i) The Contractor shall use, modify, reproduce, release, perform, or display technical data or computer software received from the Government with specially negotiated license legends only as permitted in the license. Such data or software may not be released or disclosed to other persons unless permitted by the license and, prior to release or disclosure, the intended recipient has completed the nondisclosure agreement at DFARS 227.7103-7. The Contractor shall modify paragraph (1)(c) of the nondisclosure agreement to reflect the recipient's obligations regarding use, modification, reproduction, release, performance, display, and disclosure of the data or software.

(ii) If the Contractor is a covered Government support contractor, the Contractor may also be subject to some or all of the additional terms and conditions at paragraph (b)(5) of this clause, to the extent such terms and conditions are required by the specially negotiated license.

(4) GFI technical data marked with commercial restrictive legends. (i) The Contractor shall use, modify, reproduce, perform, or display technical data that are or are related to a commercial product or commercial service and are received from the Government with a commercial restrictive legend (i.e., marked to indicate that such data are subject to use, modification, reproduction, release, performance, display, or disclosure restrictions) only in the performance of this contract. The Contractor shall not, without the express written permission of the party whose name appears in the legend, use the technical data to manufacture additional quantities of the commercial products or commercial services, or release or disclose such data to any unauthorized person.

(ii) If the Contractor is a covered Government support contractor, the Contractor is also subject to the additional terms and conditions at paragraph (b)(5) of this clause.

(5) Covered Government support contractors. If the Contractor is a covered Government support contractor receiving technical data or computer software marked with restrictive legends pursuant to paragraphs (b)(1)(ii), (b)(3)(ii), or (b)(4)(ii) of this clause, the

Contractor further agrees and acknowledges that

(i) The technical data or computer software will be accessed and used for the sole purpose of furnishing independent and impartial advice or technical assistance directly to the Government in support of the Government's management and oversight of the program or effort to which such technical data or computer software relates, as stated in this contract, and shall not be used to compete for any

Government or non-Government contract;

(ii) The Contractor shall take all reasonable steps to protect the technical data or computer software against any unauthorized release or disclosure;

(iii) The Contractor shall ensure that the party whose name appears in the legend is notified of the access or use within 30 days of the

Contractor's access or use of such data or software;

(iv) The Contractor shall enter into a nondisclosure agreement with the party whose name appears in the legend, if required to do so by

11 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

that party, and that any such nondisclosure agreement will implement the restrictions on the Contractor's use of such data or software as set forth in this clause. The nondisclosure agreement shall not include any additional terms and conditions unless mutually agreed to by the parties to the nondisclosure agreement; and

(v) That a breach of these obligations or restrictions may subject the Contractor to

(A) Criminal, civil, administrative, and contractual actions in law and equity for penalties, damages, and other appropriate remedies by the United States; and

(B) Civil actions for damages and other appropriate remedies by the party whose name appears in the legend.

(c) Indemnification and creation of third party beneficiary rights. The Contractor agrees

(1) To indemnify and hold harmless the Government, its agents, and employees from every claim or liability, including attorneys fees, court costs, and expenses, arising out of, or in any way related to, the misuse or unauthorized modification, reproduction, release, performance, display, or disclosure of technical data or computer software received from the Government with restrictive legends by the

Contractor or any person to whom the Contractor has released or disclosed such data or software; and

(2) That the party whose name appears on the restrictive legend, in addition to any other rights it may have, is a third-party beneficiary who has the right of direct action against the Contractor, or any person to whom the Contractor has released or disclosed such data or software, for the unauthorized duplication, release, or disclosure of technical data or computer software subject to restrictive legends.

(d) The Contractor shall ensure that its employees are subject to use and nondisclosure obligations consistent with this clause prior to the employees being provided access to or use of any GFI covered by this clause.

(End of clause)

12 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION K - REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS OF OFFERORS

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

K-1 DELETED 52.204-29 Federal Acquisition Supply Chain Security Act Orders-Representation DEC/2023 and Disclosures (Dec 2023)

K-2 DELETED 52.225-20 PROHIBITION ON CONDUCTING RESTRICTED BUSINESS OPERATIONS IN SUDAN-- AUG/2009

CERTIFICATION

K-3 DELETED 52.225-25 PROHIBITION ON CONTRACTING WITH ENTITIES ENGAGING IN SANCTIONED JUN/2020

ACTIVITIES RELATING TO IRAN--REPRESENTATION AND CERTIFICATION

K-4 ADDED 52.240-90 SECURITY PROHIBITIONS AND EXCLUSIONS REPRESENTATIONS AND FEB/2026

CERTIFICATIONS

K-5 CHANGED 52.204-90 OFFEROR INDENTIFICATION FEB/2026

If the Offeror will not have an active Federal Government contracts registration in the System for Award Management

(https://www.sam.gov) when submitting its offer, it shall complete paragraphs (c) and (d) of this provision and include its responses with its offer.

Definitions. As used in this provision

Commercial and Government Entity (CAGE) code has the meaning provided in the clause at FAR 52.204-91, Contractor Identification, of this solicitation.

Common parent means that corporate entity that owns or controls an affiliated group of corporations that files its Federal income tax returns on a consolidated basis, and of which the offeror is a member.

Electronic Funds Transfer (EFT)indicator means a bank account identifier to establish additional System for Award Management records for identifying alternative EFT accounts (see part 32) for the same entity.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest-level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. There may be more than one immediate owner (e.g., joint ventures).

Predecessor means an entity whose assets were acquired by the offeror or another entity (most often through merger or acquisition) and whose affairs are now carried out by the offeror or the other entity under a new name.

Taxpayer Identification Number means the number required by the Internal Revenue Service (IRS) to be used by the offeror to report income tax and other returns. It may be either a Social Security Number or an Employer Identification Number.

Unique entity identifier (UEI)has the meaning provided in the clause at FAR 52.204-91, Contractor Identification, of this solicitation.

Unique entity identifier (UEI).

The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity

Identifier" followed by the UEI that identifies the Offeror's name and address exactly as stated in the offer. The Offeror shall also enter its EFT indicator, if applicable.

If the Offeror does not have a UEI, it shall go to HYPERLINK "https://www.sam.gov"https://www.sam.gov to obtain one. The Government will independently validate the existence and uniqueness of the Offeror before assigning a UEI.

(c)Taxpayer identification. The Offeror shall provide with its offer the following information that is necessary to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d); reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M; and the implementing IRS regulations:

(1)Taxpayer identification number (TIN)

TIN: ______________;

TIN has been applied for; or

TIN is not required because:

Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the

United States;

Offeror is an agency or instrumentality of a foreign government; or

Offeror is an agency or instrumentality of the Federal Government.

13 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(2)Type of organization.

Sole proprietorship;

Partnership;

Corporate entity (not tax-exempt);

Corporate entity (tax-exempt);

Government entity (Federal, State, or local);

Foreign government;

International organization per 26 CFR 1.6049-4; or

Other.

(3)Common parent.

Offeror is not owned or controlled by a common parent as defined in paragraph (a) of this provision; or

Name and TIN of common parent:

Name: ______________

TIN: ______________

(4)The TIN provided in paragraph (c)(1) of this provision may be matched with IRS records to verify the accuracy of the Offeror's

TIN. The Government may use the TIN to collect and report on any delinquent amounts arising out of the Offeror's relationship with the Government (31 U.S.C. 7701(c)(3)).

(d)Commercial and Government Entity (CAGE) code.

(1)The Offeror shall provide its CAGE code with its offer with its name and location address or otherwise include it prominently in its offer. The CAGE code shall be for that name and location address. Insert the word "CAGE" before the code. The Offeror may obtain a CAGE code as indicated in the following table.

If the Offeror is Then

Located in the United Submit a request to the DLA CAGE Branch via

States or its outlying areas https://cage.dla.mil

Located outside the United Contact the appropriate National Codification Bureau

States and its outlying https://www.nato.int/structur/ac/135/about/contacts areas and its country is a member of the North

Atlantic Treaty

Organization (NATO) or a sponsored nation

Located outside the United Contact the NATO Support and Procurement Agency (NSPA)

States and its outlying https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx areas and its country is not a member of NATO or a sponsored nation

(2)The Offeror shall provide the CAGE code and legal business name (Do not use a "doing business as" name) for

(i)Its immediate owner(s), if any;

(ii)Its highest-level owner, if any; and

(iii)Any predecessor(s), or predecessor of an Offeror's predecessor, that held a Federal contract or grant within the last three years.

Owner Type CAGE Code Legal Business Name

Immediate owner

Highest-level owner

Predecessor*

* Predecessor CAGE code may be marked "Unknown."

(3)If the Offeror has more than one immediate owner (such as a joint venture), give the information for each owner (or joint venture participant). If the Offeror has more than one predecessor, provide information for each predecessor in reverse chronological order.

(End of provision)

14 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

K-6 DELETED 52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025) (DEVIATION 2025-- MAR/2025

O0003) and (DEVIATION 2025-O00004)

K-7 DELETED 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO NOV/2021

SURVEILLANCE SERVICES OR EQUIPMENT

15 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION L - INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

L-1 DELETED 52.204-6 UNIQUE ENTITY IDENTIFIER OCT/2016

L-2 DELETED 52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING AUG/2020

L-3 DELETED 52.204-22 ALTERNATIVE LINE ITEM PROPOSAL JAN/2017

L-4 DELETED 52.211-1 AVAILABILITY OF SPECIFICATIONS LISTED IN THE GSA INDEX OF FEDERAL SEP/2023

SPECIFICATIONS, STANDARDS AND COMMERCIAL ITEM DESCRIPTIONS, FPMR PART

101-29 (Sep 2023)

L-5 DELETED 52.211-2 Availability of Defense Specifications, Standards, and Data Item SEP/2023

Descriptions in the Acquisition Streamlining and Standardization

Information System (ASSIST) Website (Sep 2023)

L.1 GENERAL PROPOSAL INFORMATION

L.1.1 The proposal, subject to the Submission, Modification, Revision, and Withdrawal paragraph of Instructions to Offeror(s)

Competitive Acquisitions (FAR Provision 52.215-1) contained in Section L of the solicitation, shall be submitted in the format and quantities set forth below. All information necessary for the review and evaluation of a proposal is to be contained in the proposal.

Section M of the solicitation sets forth the evaluation criteria and delineates the Factors to be evaluated and their relative order of importance. The offeror's proposal, as required by this section, will be evaluated as set forth in Section M of this solicitation. The

Government will not assume the offeror possesses any capability, understanding, or commitment not specified in its proposal. It is an offeror's responsibility to submit a well-written proposal, with adequately detailed information, which clearly demonstrates an understanding of and the ability to comply with the solicitation requirements to allow for a meaningful evaluation. The Government does not assume the duty to search for data to cure problems it finds in proposals.

L.1.2 Minimum Acceptance Period. This provision supersedes any language pertaining to the acceptance period that may appear elsewhere in this solicitation (e.g. SF 33 Box 12).

ACCEPTANCE PERIOD means the number of calendar days available to the Government for awarding a contract from the date specified in this solicitation for receipt of offers.

L.1.2.1. The Government specified minimum acceptance period is 180 calendar days.

L.1.2.2. The offeror shall clearly state in its proposal the acceptance period. Offerors may specify a longer acceptance period than the

Government's minimum acceptance period stated above.

L.1.2.3. An offer allowing less than the Government's minimum acceptance period, or fails to provide a proposal acceptance period, may be rejected.

L.2 PROPOSAL CONTENT, FORMAT AND INSTRUCTIONS

L.2.1 Proposal Content

L.2.1.1 All proposals shall be in English (American Standard) and shall be in US dollars. Proposals not in English (American Standard) or in US Dollars may be rejected. The proposal shall include all information specified and shall address all requirements outlined in

Section L.

L.2.1.2 A Proposal Executive Summary or transmittal letter is optional. It will neither be considered as part of the proposal, nor will it be evaluated. If a Proposal Executive Summary is submitted, it should be no more than five pages in length.

L.2.2 Proposal Method of Submission, Format, and Instructions

L.2.2.1 The proposal shall be electronically submitted via E-mail to the Contract Specialist, Nicholas Lang, and cc the corresponding

Contracting Officer, Daniel J. Gibson, at the following e-mail address(s) with the subject header: Proposal Submission - W912CH-25-R-

0142(company name):

Contract Specialist: nicholas.a.lang.civ@army.mil

Contracting Officer: daniel.j.gibson43.civ@army.mil

Fax, hardcopy, and DVD/CD-ROM proposals will NOT be accepted. Hand-carried offers, whether hardcopy or electronic, will NOT be accepted.

Maximum size of each e-mail shall be 10 megabytes. The offeror may use multiple e-mail messages for each submission; however, it should annotate the subject lines as described above for each message, and number them in this manner: Message 1 of 3, 2 of 3, 3 of 3.

16 23

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Note: There is no "expected" or "target" length of time for proposal submission via email; size and content may be factors, therefore offerors are strongly cautioned when submitting proposals to allow adequate time for submission.

L.2.2.1.1 Each submitted File shall be labeled so it is easily identifiable for which information it pertains.

L.2.2.1.2 Acceptable File Formats. All electronic information provided in response to the solicitation must be provided in Microsoft

(MS) Office 2013 compatible…