SPI AK16704971.pdf
PDF 304 KB Posted
- Solicitation number
- W912CH24R0050
- Issued by
-
Department of the Army
About this file
This is a DD Form 2169 Special Packaging Instruction document for a Smart Display Unit (NSN 7025-01-670-4971), dated May 13, 2020, Revision A. The document specifies detailed packaging, preservation, and handling requirements for this electronic component manufactured by CAGE code 19207 under part number 12581798.
The item requires ESD (electrostatic discharge) sensitive handling at approved workstations per MIL-STD-1686 and MIL-HDBK-263. Preservation follows MIL-STD-2073-1 Method 41 with cleaning and drying per that standard. The unit pack weighs 21.6 pounds and measures 20.5 X 18.7 X 7.9 inches. Packaging requires electrical connector seals (NASM5501/31 caps/plugs), wrapping per MIL-PRF-81705 Type III (34 X 20 inches), placement in a heat-sealed bag per MIL-DTL-117 Type I Class F (15 X 17 inches), and cushioning as specified. The outer container is an ASTM D5118 corrugated fiberboard box (20 X 18-1/8 X 7-1/8 inches) with closure per ASTM D1974 Closure 2B6. Level A packing uses cleated-plywood or nailed wood boxes per ASTM D6251 or D6880; Level B uses fiberboard or corrugated boxes per ASTM D5118 or D5168. Three MIL-PRF-26514 Type III Class 2 Grade B cushioning blocks are required: two pieces at 20 X 18 X 2 inches, two at 18 X 4 X 3 inches, and two at 12 X 4 X 3 inches. Shipments exceeding 125 pounds require palletization per MIL-STD-147. Marking must include ESD sensitive device labeling per MIL-STD-129.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| New Item TAV-C Requirements and TAV-C Portal User Access - End User SOP - v1.0 (1).pdf | ||
| GFP Attachment (version 3.0).xlsx | XLSX spreadsheet | |
| W912CH24R0050_0002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BM
JS
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12581798 (19207) SMART DISPLAY UNIT 19207 AK16704971
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
7025-01-670-4971 May 13, 2020 A
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 21.6 1.761 20.5 X 18.7 X 7.9
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 41
13. CLEANING 1-B CAPS/PLUGS: NASM5501/31
MIL-STD-2073-1 2-C 1 WRAP: MIL-PRF-81705, TY III , SIZE: 34 X 20
14. DRYING
MIL-STD-2073-1 3-D 1 BAG: MIL-DTL-117,TY I, CL F, ST 1, SIZE:15 X 17
15. PACKING
3-F CUSHIONING: SEE NOTES
a. LEVEL A
MIL-STD-2073-1 & NOTE I 4-G 1 CONTAINER: ASTM D5118, ST RSC, TY CF, CL WR,
b. LEVEL B
VAR SW, GRADE W5c, SIZE: 20 X 18-1/8 X 7-1/8
MIL-STD-2073-1 & NOTE I
16. MARKING
MIL-STD-129 AND NOTE H
17. NOTES/DRAWING
PACKAGE AND HANDLE AT AN APPROVED ESD WORKSTATION IN ACCORDANCE WITH MIL-STD-1686 AND
MIL-HDBK-263.
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER
SPECIFICATION.
B. SEAL ALL ELECTRICAL CONNECTORS WITH CAPS/PLUGS OF THE APPROPRIATE SIZE.
C. APPLY WRAP TO THE SMART DISPLAY UNIT. DO NOT SECURE WITH TAPE.
D. PLACE WRAPPED ITEM IN BAG. CLOSURE SHALL BE BY HEAT SEALING.
E. FABRICATE ITEMS “A”, “B”, AND “C” FROM THE CHART ON PAGE 2.
F. ASSEMBLE PACKAGE AS SHOWN ON PAGE 3.
G. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH CLOSURE 2B6, OF ASTM D1974.
H. ADDITIONAL MARKING SHALL INCLUDE ELECTRONIC SENSITIVE DEVICE (ESD) SENSITIVE DEVICE
MARKING AS SPECIFIED IN MIL-STD-129.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12581798 (19207) SMART DISPLAY UNIT 19207 AK16704971
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
7025-01-670-4971 May 13, 2020 A
I. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING CLEATED-PLYWOOD BOXES CONFORMING TO
ASTM D6251, TYPE III, CLASS 2; OR NAILED WOOD BOXES CONFORMING TO ASTM D6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-
RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM D5168 OR PALLET BASE CONTAINERS, TYPE III, CONFORMING TO MIL-B-43666. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
BLOCK
NUMBER
DESCRIPTION
QTY
COMMENTS
A MIL-PRF-26514 TYPE III, CLASS 2, GR B
SIZE: 20 X 18 X 2
B MIL-PRF-26514 TYPE III, CLASS 2, GR B
SIZE: 18 X 4 X 3
C MIL-PRF-26514 TYPE III, CLASS 2, GR B
SIZE: 12 X 4 X 3
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
12581798 (19207) SMART DISPLAY UNIT 19207 AK16704971
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
7025-01-670-4971 May 13, 2020 A
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages
File details come from the government source that posted it. Updated .