W912BU-17-B-0005_Specs-AM2.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

THIS AMENDMENT HEREBY UPDATES TECHNICAL SPECIFICATIONS.

Continued:

1. CONTRACT ID CODE PAGE OF PAGES

J 1 2

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912BU-17-B-0005

X 9B. DATED (SEE ITEM 11)

16-May-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

31-May-2017

CODE

CONTR DIV-CONTRACTS BR

USACE, PHILA DISTRICT

WANAMAKER BUILDING

100 PENN SQUARE EAST

PHILADELPHIA PA 19107-3390

W912BU 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912BU-17-B-0005

(End of Summary of Changes)

Amendment No. 0002

IFB W912BU-17-B-0005

14. DESCRIPTION OF AMENDMENT (continued)

a. SECTION 00 73 00 – SPECIAL CLAUSES: Please delete Section 00 73 00 in its entirety and substitute revised Section 00 73 00, annotated Amendment No.

0002, attached hereto.

SECTION 00 73 15 – WAGE RATES: Please delete Section 00 73 15 in its entirety and substitute revised Section 00 73 15, annotated Amendment No.

0002, attached hereto.

b. TECHNICAL SPECIFICATIONS:

(1) Section 01 11 00 – SUMMARY OF WORK: Please delete Section 01 11 00 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

(2) Section 01 32 33 – CONSTRUCTION PHOTOGRAPHY: Please delete Section 01 32 33 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

(3) Section 01 33 00 – SUBMITTAL REGISTER: Please delete page

01 33 00-15 through 01 33 00-31 in their entirety and substitute the revised pages 01 33 00-15 through 01 33 00-31, annotated Amendment No. 0002, attached hereto.

(4) Section 01 50 00 – TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS:

Please delete Section 01 50 00 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

(5) Section 01 57 20 – ENVIRONMENTAL PROTECTION: Please delete page 01 57 20-13 in its entirety and substitute the revised page 01 57 20-13, annotated Amendment No. 0002, attached hereto.

(6) Section 01 71 23 – SURVEY REQUIREMENTS: Please delete Section 01 71 23 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

(7) Section 03 30 53 – MISCELLANEOUS CAST-IN-PLACE CONCRETE: Please delete Section 03 30 53 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

(8) Section 03 45 33 – PRECAST STRUCTURAL CONCRETE: Please delete Section 03 45 33 in its entirety and substitute the revised

Section, annotated Amendment No. 0002, attached hereto.

(9) Section 31 00 00 – EARTHWORK: Please delete Section 31 00 00 in its entirety and substitute the revised Section, annotated Amendment

No. 0002, attached hereto.

(10) Section 31 63 29 – DRILLED CONCRETE SHAFTS: Please delete Section 31 63 29 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

(11) Section 32 16 15 – BRICK PAVEMENTS: Please delete Section 32 16 15 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

14. DESCRIPTION OF AMENDMENT (continued)

(12) Section 35 31 19 – CHANNEL PROTECTION FOR STRUCTURES: Please delete Section 35 31 19 in its entirety and substitute the revised Section, annotated Amendment No. 0002, attached hereto.

c. Please indicate receipt of this amendment on Standard Form 1442 (SOLICITATION, OFFER, AND AWARD) as Amendment No. 0002. Failure to acknowledge all amendments may be cause for rejection of the bid.

SECTION 00 73 00

SPECIAL CLAUSES

PART 1 GENERAL

1.1 PHYSICAL DATA (APR 1984)

Data and information furnished or referred to below is for the Contractor's information. The Government shall not be responsible for any interpretation of or conclusion drawn from the data or information by the Contractor. (FAR 52.236-4)

a. The work is located in downtown Trenton, New Jersey in the area bordered by South Broad Street, South Warren Street, East Lafayette Street, and Assunpink Drive as indicated on the drawings.

b. The indications of physical conditions on the drawings are the result of site investigations by topographic surveys conducted in April 2010.

c. Weather Conditions. The climate of the area is referred to as "continental" by climatologists, characterized by cold winters and moderately hot summers. Complete weather records and reports may be obtained from the local U.S. Weather Bureau Office nearest to the work site. The Contractor shall satisfy himself as to the hazards likely to arise from weather conditions during the construction period.

d. Access to Site. The work site is accessible from Interstate 95. The Contractor shall be responsible for all investigations of load carrying capacities of bridges and roadways.

e. Survey Controls. All horizontal and vertical control will be established by the Philadelphia District Corps of Engineers Surveys Section in the vicinity of the project, after contract award and in coordination with the Contractor. The Contractor shall contact the Philadelphia District Surveys Section at least 10 business days prior to the start of Contractor survey and/or layout operations, to determine the best locations for the control points based on project requirements. The District Surveys Section will establish up to 4 project control points in locations that are mutually agreed upon by the Contractor and the Surveys Section. The points of contact in the District Surveys Section for this project are Jeff McAleer at 267-446-2417 and Stephen Farrell at 215-656-6753.

f. Magnitude of the Contract Work. The estimated value of the contract work is $10,000,000 to $25,000,000.

g. Hours of Work. Unless otherwise directed, the Contractor shall be permitted to perform the contract work between the hours of 7:30 am and 4:00 pm, Monday through Friday. Federal holidays (New Year's Day, Martin Luther King Jr's Birthday, Presidents Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, and Christmas Day) that fall within the work week will not be considered as work days. Prior to performing any work during hours other than those specified, the

Section 00 73 00 Page 1

Contractor shall submit an overtime request to the Contracting Officer for review and approval. Overtime requests shall be submitted not less than 24 hours prior to the time the Contractor desires to perform the overtime work. The Contractor shall provide at least a 24 hour advanced notification to establish when on-site work will commence and prior to restarting on-site work following any stoppage of work lasting longer than five normal workdays. Notification shall be provided by phone, or person, or in writing, and shall be given directly to the Contracting Officer.

1.2 LAYOUT OF WORK (DEC 1996)

The Contractor shall lay out its work from Government-provided culvert coordinates and survey control points, furnished as part of each work assignment. The Contractor shall furnish, at its own expense, such stakes, templates, platforms, equipment, range markers and labor as may be required in laying out any part of the work, from the channel coordinates and surveying benchmarks furnished by the Government and shall be responsible for all measurements in connection therewith. If any Government control is found disturbed or destroyed, this must be communicated to the Philadelphia District Surveys Branch through the COR before any control is re-established. The Contractor shall be responsible for executing the work to such lines and grades as may be established or indicated by the Contracting Officer. (CENAP)

1.3 TIME EXTENSIONS FOR UNUSUALLY SEVERE WEATHER (OCT 1989)

a. This clause specifies the procedure for determination of time extensions for unusually severe weather in accordance with the Contract Clause entitled: "Default (Fixed-Price Construction)". In order for the Contracting Officer to award a time extension under this clause, the following conditions must be satisfied:

(1) The weather experienced at the project site during the contract period must be found to be unusually severe, that is, more severe than the adverse weather anticipated for the project location during any given month.

(2) The unusually severe weather must actually cause a delay to the completion of the project. The delay must be beyond the control and without the fault or negligence of the Contractor.

b. The following schedule of monthly anticipated adverse weather delays is based on National Oceanic and Atmospheric Administration (NOAA) or similar data for the project location and will constitute the base line for monthly weather time evaluations. The Contractor's progress schedule must reflect these anticipated adverse weather delays in all weather dependent activities. For the purpose of this contract, unusually severe weather is defined as daily precipitation equal to or exceeding 0.5 inches and/or maximum daily temperature not exceeding 32 degrees F.

MONTHLY ANTICIPATED ADVERSE WEATHER DELAY

WORK DAYS BASED ON (5) DAY WORK WEEK

JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

5 2 2 2 2 2 2 2 2 2 2 2

Section 00 73 00 Page 2

c. Upon acknowledgment of the Notice to Proceed (NTP) and continuing throughout the contract, the Contractor shall record on the daily CQC report, the occurrence of adverse weather and resultant impact to normal scheduled work. Actual adverse weather days must prevent work on critical activities for 50 percent or more of the Contractor's scheduled work day.

The number of actual adverse weather delay days shall include days impacted by actual adverse weather (even if adverse weather occurred in previous month), be calculated chronologically from the first to the last day of each month, and be recorded as full days. If the number of actual adverse weather delay days exceeds the number of days anticipated in paragraph b.

above, the Contracting Officer will convert any qualifying delays to calendar days, giving full consideration for equivalent fair weather work days, and issue a modification in accordance with the contract clause entitled: "Default (Fixed Price Construction)". (ER 415-1-15)

1.4 CONTRACTOR SUPPLY AND USE OF ELECTRONIC SOFTWARE FOR PROCESSING

DAVIS-BACON ACT CERTIFIED LABOR PAYROLLS (April 2011)

(a) The contractor is encouraged to use a commercially-available electronic system to process and submit certified payrolls electronically to the Government. The requirements for preparing, processing and providing certified labor payrolls are established by the Davis-Bacon Act as stated in FAR clause 52.222-8, Payrolls and Basic Records and FAR clause 52.222-13, Compliance with Davis-Bacon and Related Act Regulations.

(b) If the contractor elects to use an electronic Davis-Bacon Act payroll processing system, then the contractor shall be responsible for obtaining and providing for all access, licenses, and other services required to provide for receipt, processing, certifying, electronically transmitting to the Government, and storing weekly payrolls and other data required for the contractor to comply with Davis-Bacon and Related Act Regulations. When the contractor uses an electronic Davis-Bacon Act payroll system, the electronic payroll service shall be used by the contractor to prepare, process, and maintain the relevant payrolls and basic records during all work under this construction contract and the electronic payroll service shall be capable of preserving these payrolls and related basic records for the required 3 years after contract completion. If the contractor chooses to use an electronic Davis-Bacon Act payroll system, then the contractor shall obtain and provide electronic system access to the Government, as required to comply with the Davis-Bacon and Related Act Regulations over the duration of this construction contract. The access shall include electronic review access by the Government contract admin office to the electronic payroll processing system used by the contractor.

(c) The contractor’s provision and use of an electronic payroll processing system shall meet the following basic functional criteria: commercially available; compliant with appropriate Davis Bacon Act payroll provisions in the FAR; able to accommodate the required numbers of employees and subcontractors planned to be employed under the contract; capable of producing an Excel spreadsheet-compatible electronic output of weekly payroll records (format at http://rms.usace.army.mil/guides.aspx) for export in an Excel spreadsheet to be imported into the contractor’s Quality Control System (QCS) version of Resident Management System (RMS), that in turn shall export payroll data to the Government’s Resident Management System (RMS); demonstrated security of data and data entry rights; ability to produce contractor-certified electronic versions of weekly payroll data;

ability to identify erroneous entries and track the data/time of all versions of the certified Davis-Bacon Act payrolls submitted to the

Section 00 73 00 Page 3 government over the life of the contract; capable of generating a durable record copy, that is, a CD or DVD and PDF file record of data from the system database at end of the contract closeout. This durable record copy of data from the electronic D-B payroll processing system shall be provided to the Government during contract closeout.

(d) All contractor-incurred costs related to the contractor’s provision and use of an electronic payroll processing service shall be included in the contractor’s price for the overall work under the contract. The costs for Davis-Bacon Act compliance using electronic payroll processing services shall not be a separately bid or reimbursed item under this contract. (UAI 22.406-6-100)

1.5 EQUIPMENT OWNERSHIP AND OPERATING EXPENSE SCHEDULE (MAR 1995)

a. This clause does not apply to terminations. See 52.249-5000, Basis for Settlement of Proposals, and FAR Part 49.

b. Allowable cost for construction and marine plant and equipment in sound workable condition owned or controlled and furnished by the Contractor or sub-contractor at any tier shall be based on actual cost data for each piece of equipment or groups of similar serial or series for which the Government can determine both ownership and operating costs from the Contractor's accounting records. When both ownership and operating costs cannot be determined for any piece of equipment from the Contractor's accounting records, costs for the equipment shall be based upon the applicable provisions of EP 1110-1-8, "Construction Equipment Ownership and Operating Expense Schedule," Region I. Working conditions shall be considered to be average for determining equipment rates using the schedule unless specified otherwise by the Contracting Officer. For equipment not included in the schedule, rates for comparable pieces of equipment may be used or a rate may be developed using the formula provided in the schedule.

For forward pricing, the schedule in effect at the time of negotiations shall apply. For retrospective pricing, the schedule in effect as of the time work was performed shall apply.

c. Equipment rental costs are allowable, subject to the provisions of FAR 31.205(d)(ii) and FAR 31.205-36. Rates for equipment rented from an organization under common control, lease-purchase arrangements, and sale-leaseback arrangements, will be determined using the schedule, except that actual rates will be used for equipment leased from an organization under common control that has an established practice of leasing the same or similar equipment to unaffiliated lessees.

d. When actual equipment costs are proposed and the total amount of the pricing action exceeds the small purchase threshold, the contracting officer shall request the contractor to submit either certified cost or pricing data, or partial/limited data, as appropriate. This data shall be submitted on Standard Form 1411, "Contract Pricing Proposal Cover Sheet."

(UAI 31.105-101)

Note #1: The small purchase threshold is $150,000.

Note #2: By submitting cost or pricing data, the Contractor grants to the Contracting Officer or an authorizing representative the right to examine those books, records, documents and other supporting data that will permit evaluation of the proposed equipment costs. This right shall extend for two years after expiration of contract performance. After price agreement the

Section 00 73 00 Page 4

Contractor shall certify that the equipment costs or pricing data submitted are accurate, complete and current.

1.6 DAMAGE TO WORK

The responsibility for damage to any part of the permanent work shall be as set forth in the clause of the contract entitled "Permits and Responsibilities". However, if, in the judgment of the Contracting Officer, any part of the permanent work performed by the Contractor is damaged by flood or hurricane, which damage is not due to the failure of the Contractor to take reasonable precautions or to exercise sound engineering and construction practices in the conduct of the work, the Contractor shall make the repairs as ordered by the Contracting Officer and full compensation for such repairs will be made at the applicable contract unit or lump sum prices as fixed and established in the contract. If, in the opinion of the Contracting Officer, there are no contract unit or lump sum prices applicable to any part of such work, and equitable adjustment pursuant to Contract Clause entitled "Changes," will be made as full compensation for the repairs of that part of the permanent work for which there are no applicable contract unit or lump sum prices. Except as herein provided, damages to all work (including temporary construction), utilities, materials, equipment and plant shall be repaired to the satisfaction of the Contracting Officer at the Contractor's expense regardless of the cause of such damage. (CENAP)

1.7 CERTIFICATES OF COMPLIANCE

Any certificates required for demonstrating proof of compliance of materials with specifications requirements shall be executed in triplicate copies. Each certificate shall be signed by an official authorized to certify on behalf of the manufacturing company and shall contain the name and address of the Contractor, the project name and location, and the quantity and date or dates of shipment or delivery to which the certificates apply. Copies of laboratory test reports submitted with certificates shall contain the name and address of the testing laboratory and the date or dates of the tests to which the report applies.

Certification shall not be construed as relieving the Contractor from furnishing satisfactory material, if, after tests are performed on selected samples, the material is found not to meet the specific requirements.

(CENAP)

1.8 PERFORMANCE EVALUATION OF CONTRACTOR (MAR 2014)

a. As a minimum, the Contractor's performance will be evaluated upon final acceptance of the work for contracts less than one year in duration.

Contracts in excess of one year will receive at a minimum, an annual interim evaluation in addition to the final evaluation. However, interim evaluation may be prepared at any time during contract performance when determined to be in the best interest of the Government. The evaluation will be entered into the Contractor Performance Assessment Reporting System

(CPARS).

b. CPARS is a web-enabled application that supports the completion, distribution, and retrieval of construction contract performance evaluations. CPARS is for UNCLASSIFIED use only. An evaluation assesses Contractor performance and provides a record, both positive and negative, Section 00 73 00 Page 5 on a given contract. Each evaluation is based on objective facts and supported by contract management data, such as contract performance elements that evaluate quality, timely performance, effectiveness of management, and compliance with contract terms, labor standards, and safety requirements. The Contractor will be rated either outstanding, above average, satisfactory, marginal, or unsatisfactory in the areas of Contractor Quality Control, Timely Performance, Effectiveness of Management, Compliance with Labor Standards, and Compliance with Safety Standards. The Contractor will be advised of any unsatisfactory rating, either in an individual element or in the overall rating, prior to completing the evaluation, and all Contractor comments will be made a part of the official record. Performance Evaluation Reports will be available to all DOD Contracting offices for their future use in determining Contractor responsibility, in compliance with ER 415-1-17.

c. Upon successful award of the contract, the Contractor will be notified by CPARS via email that access has been granted to a contract within the system. The email will contain instructions of how to log into the system.

(CENAP)

1.9 INSURANCE REQUIREMENTS

Evidence of the following insurance shall be provided to the Contracting Officer prior to commencement of work and shall be maintained throughout the period of performance. Contractor shall co-insure the State of New Jersey and the City of Trenton under General Liability Insurance, as noted below in paragraph (a).

a. General Liability Insurance (Comprehensive form of policy): Bodily Injury Liability - $500,000 per occurrence.

In addition, the Contractor shall name the State of New Jersey and the City of Trenton as "Additional Insured" under their General Liability Insurance. Any additional premiums incurred to accomplish this shall be included as Bid Item titled "Name the State of New Jersey and City of Trenton as 'Additional Insured' under General Liability Insurance". The City of Trenton is to be named as an additional insured and named as the certificate holder as follows: "City of Trenton, 319 East State Street, Trenton, NJ 08608". The Certificate shall contain a 30-day notice of cancellation.

State of New Jersey requires $1,000,000 per occurrence coverage and $2,000,000 aggregate.

b. Automobile Liability Insurance (Comprehensive form of policy): Bodily Injury Liability - $200,000 per person and $500,000 per accident. Property Damage Liability - $20,000 per accident.

State of New Jersey requires $1,000,000 each occurrence coverage.

c. Workmen's Compensation and Employer's Liability Insurance: Compliance with applicable workmen's compensation and occupational disease statutes is required. Employer's liability coverage in the minimum amount of $100,000 is also required."

State of New Jersey requires Statutory amounts pursuant to N.J.S.A. 34 et seq.

Section 00 73 00 Page 6

d. Contractor's Pollution Liability Insurance: Prior to the commencement of the Work, the Contractor/ shall obtain and maintain throughout the life of the Work, a broad form Contractor's Pollution Liability Insurance Policy.

As a minimum, the Contractor's Pollution Liability Insurance policy shall include policy limits of $1,000,000 per occurrence and $2,000,000 aggregate. The coverage shall:

(1) Apply, without limitation, to bodily injury, property damage (including loss of use of damaged property or of property which has not been physically injured or destroyed) and clean-up costs.

(2) Provide coverage for pollution conditions which arise from encountering pre-existing environmental conditions at the project site.

(3) Provide coverage for liability resulting from the transportation of hazardous wastes.

(4) Be written on a "project specific" basis.

(5) Not carry a deductible greater than $10,000. All deductibles applicable to the insurance coverage shall be borne by the Contractor.

1.10 PARTNERING

In order to most effectively accomplish this contract, the Government proposes to form a cohesive partnership with the contractor. Key players within this partnership may also include subcontractors, users, operators, tenants or other parties deemed appropriate by the Government and contractor. This partnership would strive to draw upon the strengths of each organization and a system of superior real time communications that will be developed by the partners in an effort to achieve a quality product, on time and within budget. This partnership would be developed bilaterally and participation will be totally voluntary. Costs associated with effectuating this partnership will be absorbed by the parties as an alternate method of normal contract administration activities with no change in contract price. Activities are expected to include one or more brainstorming sessions among potential partners pursuant to a Memorandum-Of-Understanding that will detail the bylaws of operation.

By-laws will establish, for example, an effective means of addressing clarifications or issues that may develop during the construction process, to include real time Alternate Dispute Resolution procedures to effectively address those issues that are not more readily resolved. Effective Partnering is expected to be beneficial to all parties. (CENAP)

PART 2 PRODUCTS (Not Used)

PART 3 EXECUTION (Not Used)

-- End of Section --

Section 00 73 00 Page 7

This page was intentionally left blank for duplex printing.

Section 00 73 15 Page 1

SECTION 00 73 15

WAGE RATES

The work to be performed under this contract is classified as

HEAVY

Section 00 73 15 Page 2

General Decision Number: NJ170001 05/19/2017 NJ1

Superseded General Decision Number: NJ20160001

State: New Jersey

Construction Type: Highway

Counties: Atlantic, Burlington, Camden, Cape May, Cumberland, Gloucester, Mercer, Monmouth, Ocean and Salem Counties in New Jersey.

HIGHWAY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017.

The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/06/2017 1 02/10/2017 2 03/03/2017 3 04/21/2017 4 05/19/2017

BRNJ0002-002 11/01/2016

Rates Fringes

Bricklayer.....................$ 40.00 29.29

Work 100 degrees F. and over:

to be paid at the rate of double time.

Work on high stacks:

22% per hour additional.

BRNJ0002-003 11/01/2016

Section 00 73 15 Page 3

DOES NOT INCLUDE BUILDING CONSTRUCTION IN MERCER COUNTY - SEE

SUNJ1993-001

Rates Fringes

Cement mason....................$ 40.00 29.29

Cement mason:

Epoxy, acid and latex work: $.50 per hour additional.

* CARP0006-005 05/01/2017

Rates Fringes

Carpenter......................$ 47.28 57%

CARP0454-002 05/01/2016

ATLANTIC, BURLINGTON, CAMDEN, CAPE MAY, CUMBERLAND, GLOUCESTER,

OCEAN AND SALEM COUNTIES:

Piledriver.......................$ 43.95 31.32

PAID HOLIDAYS:

New Year's Day, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Thanksgiving Day and Christmas Day; provided that the worker works any of the three days in the five-day work week preceding the holiday and the first work day after the holiday.

CARP1556-002 05/01/2015

MERCER AND MONMOUTH COUNTIES:

Rates Fringes

Dock Builder & Piledrivermen.....$ 43.10 42.11

Work on land pile driving, while handling and working with creosote and creosote-impregnated products: $.25 per hour additional.

Work on hazardous/toxic/contaminated waste removal, on a hazardous/toxic/contaminated waste site, where the worker comes into contact with hazardous/toxic/contaminated waste material, and when A, B or C personal protective equipment

Section 00 73 15 Page 4 is required and used for respiratory, skin or eye protection: 20% per hour additional.

ELEC0269-003 03/01/2015

BURLINGTON COUNTY (north of a line following the west and south limits of Burlington Borough from the Delaware River, in a southeasterly direction, to the Burlington - Mt. Holly road;

then, south-southeast along the Burlington - Mt. Holly road to the town of Mt. Holly, includes Mt. Holly; then, east along the Pennsylvania Railroad to the town of New Lisbon, includes New Lisbon; then, continuing along the Pennsylvania Railroad to the Ocean County line); MERCER COUNTY:

Line construction:

Continuous pipe-type underground oil-filled transmission conduit installations:

Ground person; truck with winch operator.............$ 38.86 60.93% Line technician; cable splicer; heavy equipment operator...................$ 48.57 60.93% All other work:

Ground person; truck with winch operator.............$ 38.86 60.93% Line technician; cable splicer; heavy equipment operator...................$ 48.57 60.93%

ELEC0269-004 05/01/2016

BURLINGTON COUNTY (north of a line following the west and south limits of Burlington Borough from the Delaware River, in a southeasterly direction, to the Burlington - Mt. Holly road;

then, south-southeast along the Burlington - Mt. Holly road to the town of Mt. Holly, includes Mt. Holly; then, east along the Pennsylvania Railroad to the town of New Lisbon, includes New Lisbon; then, continuing along the Pennsylvania Railroad to the Ocean County line); MERCER COUNTY:

Electrician and cable splicer....$ 49.18 61.48%

ELEC0351-001 10/03/2016

Section 00 73 15 Page 5

ATLANTIC COUNTY; BURLINGTON COUNTY (south of a line following the west and south limits of Burlington Borough from the Delaware River, in a southeasterly direction, to the Burlington

- Mt. Holly road; then, south-southeast along the Burlington - Mt. Holly road to the town of Mt. Holly, does not include Mt.

Holly; then, east along the Pennsylvania Railroad to the town of New Lisbon, does not include New Lisbon; then, continuing along the Pennsylvania Railroad to the Ocean County line);

CAMDEN, CAPE MAY, CUMBERLAND, GLOUCESTER AND SALEM COUNTIES:

Electricians:

Cable splicer on lead cable.$ 46.51 72.54% + .65 Electrician and cable splicer.....................$ 45.83 76.55%+.65

ELEC0351-002 10/03/2016

ATLANTIC COUNTY; BURLINGTON COUNTY (south of a line following the west and south limits of Burlington Borough from the Delaware River, in a southeasterly direction, to the Burlington

- Mt. Holly road; then, south-southeast along the Burlington - Mt. Holly road to the town of Mt. Holly, does not include Mt.

Holly; then, east along the Pennsylvania Railroad to the town of New Lisbon, does not include New Lisbon; then, continuing along the Pennsylvania Railroad to the Ocean County line);

CAMDEN, CAPE MAY, CUMBERLAND, GLOUCESTER AND SALEM COUNTIES:

Line construction:

Groundmen...................$ 36.29 66.82%+.5 Lineman, cable splicer, and heavy equipment operator....................$ 45.83 76.55%+.65

ELEC0400-001 05/30/2016

MONMOUTH AND OCEAN COUNTIES:

Rates Fringes

Electrician & Cable Splicer......$ 46.68 33.50

ELEC0400-002 05/30/2016

MONMOUTH AND OCEAN COUNTIES:

Section 00 73 15 Page 6

Line construction:

Continuous pipe-type underground oil-filled transmission conduit installations:

Electrical installation equipment operators: Hole-digging equipment; truck with winch or pole, and steel hand; truck without winch; ground person.......$ 30.30 20.60 Equipment service person...$ 46.68 33.50 Line technician, cable splicer, x-ray technician, and equipment repair person..............$ 46.68 33.50 Line technician/welder.....$ 46.68 33.50 All other work:

Ground person..............$ 32.68 23.45 Line technician, cable splicer, and equipment operator...................$ 46.68 33.50

Work with hazardous materials: 10% per hour additional.

ENGI0825-002 01/01/2016

Rates Fringes

Power equipment operators:

GROUP 1.....................$ 47.07 29.80

GROUP 2.....................$ 45.48 29.80

GROUP 3.....................$ 43.57 29.80

GROUP 4.....................$ 41.94 29.80

GROUP 5.....................$ 40.23 29.80

GROUP 6.....................$ 42.84 27.25

Hazardous waste removal work:

Work on a state or federally designated hazardous waste site, where the worker is in direct contact with hazardous material, and when personal protective equipment is required for respiratory, skin and eye protection: 20% per hour additional.

PAID HOLIDAYS:

New Year's Day, Washington's Birthday observed, Memorial Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day;

provided 1) that the worker works three of the preceding

Section 00 73 15 Page 7 five work days before the holiday; or, the work day before the holiday and the work day after the holiday; and, 2) that the worker works the work day before and the work day after the holiday.

DEFINITION OF GROUPS:

GROUP 1:

Autograde - combination subgrader; base metal spreader and base trimmer (CMI and similar types); autograde placer -trimmer spreader combination (CMI and similar types);

autograde slipform paver (CMI and similar types); backhoe;

central power plant (all types); concrete paving machine;

crane (all types, including overhead and straddle traveling type); crane, gantry; derrick (land, floating or Chicago boom type); drillmaster, quarrymaster (down-the-hole drill, rotary drill, self-propelled hydraulic drill, self-powered drill); dragline; elevating grader; front end loader (5 cu.

yd. and over); gradall; grader, raygo; locomotive (large);

mucking machine; pavement and concrete breaker (superhammer and hoe ram); pile driver (length of boom, including length of leads, shall determine premium rate applicable); roadway surface grinder; scooper (loader and shovel); shovel; tree chopper with boom; trench machine (cable plow)

GROUP 2:

"A" frame/backhoe combination; boom attachment on loader (rate based on size of bucket, not applicable to pipehook);

boring and drilling machine; brush chopper, shredder and tree shredder; carryall; concrete pump; concrete pumping system, pumpcrete and similar type; conveyor, 125 ft. and over; drill doctor, including dust collecting and maintenance work; front end loader (2 cu. yd. but less than 5 cu. yd.); grader (finish); groove cutting machine (ride-on type); heater planer; hoist (all types of hoist, shall also include steam, gas, diesel, electric, air, hydraulic, single and double drum, concrete, brick shaft caisson, snorkel roof, and/or any other similar type hoisting machine, portable or stationary, except Chicago boom type) (if hoist is "outside material tower hoist", long boom rate is to be applied); hydraulic crane, 10 tons and under; hydro-axe; hydro-blaster; jack (screw, air, hydraulic power-operated unit or console type (not hand jack or pile load test type); log skidder; pan; pavers (all) (concrete); plate and frame filter press; pumpcrete machine; squeezecrete; concrete pump (regardless of size);

scraper; side boom; straddle carrier, Ross and similar type; whip hammer; winch truck (hoisting)

GROUP 3:

Asphalt curbing machine; asphalt plant engineer; asphalt

Section 00 73 15 Page 8 spreader; autograde tube finishing and texturing machine (CMI and similar types); autograde curecrete machine (CMI and similar types); autograde curb trimmer and sidewalk, shoulder, slipform (CMI and similar types); bar bending machine (power); batcher; batching plant and crusher on site; belt conveyor system; boom-type skimmer machine;

bridge deck finisher; bulldozers (all); car dumper (railroad); compressor and blower-type unit (used independently or mounted on dual-purpose truck, on jobsite or in conjunction with jobsite, in loading and unloading of concrete, cement, fly ash, instantcrete, or similar type materials); compressor (2 or 3) (in battery) (within 100 ft.); concrete cleaning/decontamination machine operator, when used for decontamination and remediation; concrete finishing machine; concrete saw and cutter (ride-on type);

concrete spreader, hetzel, rexomatic and similar type;

concrete vibrator; conveyor, under 125 ft.; crushing machine; directional boring machine; ditching machine, small (Ditchwitch, Vermeer or similar type); dope pot (mechanical with or without pump); dumpster; elevator;

firefighter; forklift (Economobile, Lull and similar type of equipment); front end loader (1 cu. yd. and over but less than 2 cu. yd.); generator (2 or 3) (in battery) (within 100 ft.); giraffe grinder; grader and motor patrol;

gunite machine (does not include nozzle); hammer, vibratory (in conjunction with generator); heavy equipment robotic operator/technician, when used for decontamination and remediation; hoist (roof, tugger, aerial platform hoist and house cars); hopper; hopper door (power-operated); ladder (motorized); laddervator; locomotive, dinky type;

maintenance, utility person; master environmental maintenance technician, when used for decontamination and remediation; mechanic; mixer (except paving mixer);

pavement breaker, small, self-propelled ride-on type (also maintains compressor on hydraulic unit); pavement breaker, truck-mounted; pipe bending machine (power); pitch pump;

plaster pump, regardless of size; posthole digger (post pounder and auger); rod bending machine (power); roller, blacktop; scale, power; seaman pulverizing mixer; shoulder widener; silo; skimmer machine (boom type); steel cutting machine, servicing and maintaining; tractor; captain, power boat; tug master, power boat; ultra high-pressure waterjet cutting tool system operator/maintenance technician, when used for decontamination and remediation; vacuum blasting machine operator/maintenance technician, when used for decontamination and remediation; vibrating plant (used in conjunction with unloading); welder and repair mechanic

GROUP 4:

Broom and sweeper; chipper; compressor (single); concrete spreader (small type); conveyor loader (does not include elevating grader); engine, large diesel (1620 H.P.) and

Section 00 73 15 Page 9 staging pump; farm tractor; fertilizing equipment (operation and maintenance of); fine grade machine (small type); form line grader (small type); front end loader (under 1 cu. yd.); generator (single); grease, gas, fuel and oil supply truck; heater (Nelson or other type including propane, natural gas or flow-type unit); lights (portable generating light plant); mixer, concrete, small;

mulching equipment (operation and maintenance of); off-road back dump; pump (4-in. suction and over, including submersible pump); pump (diesel engine and hydraulic) (immaterial of power); road finishing machine (small type);

roller, grade, fill or stone base; seeding equipment (operation and maintenance of); sprinkler and water pump truck; steam jenny and boiler; stone spreader; tamping machine, vibrating ride-on; temporary heating plant (Nelson or other type, including propane, natural gas or flow-type unit); welding machine (gas, diesel, and/or electric converter of any type) (single, or two or three in a battery) (within 100 ft.); welding system, multiple (rectifier, transformer type); wellpoint system

GROUP 5:

Oiler; tire repair and maintenance

GROUP 6:

Helicopter pilot; helicopter engineer

ENGI0825-004 01/01/2016

Rates Fringes

Power equipment operators:

Steel erection:

GROUP 1....................$ 54.09 29.80

GROUP 2....................$ 52.43 29.80

GROUP 3....................$ 50.70 29.80

GROUP 4....................$ 46.64 29.80

GROUP 5....................$ 43.98 29.80

GROUP 6....................$ 42.45 29.80

GROUP 7....................$ 40.69 29.80

Hazardous waste removal work:

Work on a state or federally designated hazardous waste site, where the worker is in direct contact with hazardous material, and when personal protective equipment is

New Year's Day, Washington's Birthday observed, Memorial

Section 00 73 15 Page 10

Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day;

provided 1) that the worker works three of the preceding five work days before the holiday; or, the work day before the holiday and the work day after the holiday; and, 2) that the worker works the work day before and the work day after the holiday.

Cranes (all cranes, land or floating with boom including jib, 140 ft. and over, above ground); derricks (all derricks, land, floating or Chicago boom type with boom including jib, 140 ft. and over, above ground)

GROUP 2:

Cranes (all cranes, land or floating with boom including jib, less than 140 ft. above ground); derricks (all derricks, land, floating or Chicago boom type with boom including jib, less than 140 ft. above ground)

GROUP 3:

Helicopter pilot

GROUP 4:

"A" frame; cherry picker (10 ton and under); hoist (all types of hoist, including steam, gas, diesel, electric, air, hydraulic, single and double drum, concrete, brick shaft caisson, or any other similar type of hoisting machine, portable or stationary, except Chicago boom type);

jack (screw, air, hydraulic power-operated unit or console type (not hand jack or pile load test type); side boom;

straddle carrier

GROUP 5:

Aerial platform used as a hoist; compressor, two or three in battery; directional boring machine; elevator or house car; concrete cleaning/decontamination machine operator, decontamination and remediation work only; conveyor and tugger hoist; firefighter; forklift; generator, two or three in battery; heavy equipment robotic operator/technician, decontamination and remediation work only; maintenance, utility person; master environmental maintenance technician, decontamination and remediation work only; rod bending machine (power); ultra high-pressure waterjet cutting tool system operator/maintenance technician, decontamination and remediation work only;

vacuum blasting machine operator/maintenance technician, decontamination and remediation work only; welding machine (gas or electric, two or three in battery, including

Section 00 73 15 Page 11 diesel); captain, power boat; tug master, power boat;

oiler, with either one compressor or one welding machine

GROUP 6:

Compressor, single; off-road back dump; welding machine (single, gas, diesel and electric converters of any type);

welding system, multiple (rectifier, transformer type);

generator, single

GROUP 7:

Oiler; deckhand

IRON0011-001 07/01/2016

MONMOUTH COUNTY; OCEAN COUNTY (north third of county):

Rates Fringes

Ironworkers:

Reinforcing.................$ 39.24 42.92 Structural..................$ 41.54 42.92

IRON0068-001 07/01/2016

BURLINGTON COUNTY (Township of Lumberton); MERCER COUNTY; OCEAN COUNTY (middle third of county):

Ironworker.....................$ 44.55 20.88

Hazardous waste removal work:

Hazardous waste removal work, on a state or federally designated hazardous waste site, where the worker is required to wear Level A, B or C personal protection: $3.00 per hour additional.

IRON0350-001 07/01/2016

ATLANTIC COUNTY; BURLINGTON COUNTY (south and east of a line starting from the point on the Atlantic-Burlington county line where the Atlantic-Burlington county line crosses Route 206;

then, following a line northeast through Wharton State Park to the town of Chatsworth; then, continuing along the same line, to the Burlington-Ocean county line); CAPE MAY COUNTY;

CUMBERLAND COUNTY (east of a line drawn from the Delaware Bay through the town of Cedarville and north to the point where the county lines of Atlantic, Cumberland and Gloucester Counties meet); OCEAN COUNTY (south third of county):

Section 00 73 15 Page 12

Ironworkers:

HIGHWAY CONSTRUCTION:

Fence and guardrail........$ 43.97 37.75 Precast and structural.....$ 46.67 37.75 Reinforced concrete........$ 45.67 37.75

IRON0399-001 07/01/2015

BURLINGTON COUNTY (north and west of a line starting from the point on the Atlantic-Burlington county line where the Atlantic-Burlington county line crosses Route 206; then, following a line northeast through Wharton State Park to the town of Chatsworth; then, continuing along the same line, to the Burlington-Ocean county line); CAMDEN COUNTY; CUMBERLAND COUNTY (west of a line drawn from the Delaware Bay through the town of Cedarville and north to the point where the county lines of Atlantic, Cumberland and Gloucester Counties meet);

GLOUCESTER AND SALEM COUNTIES:

Ironworker.....................$ 44.60 27.25

LABO0172-001 03/01/2017

HIGHWAY CONSTRUCTION:

Rates Fringes

Laborers:

Group 1.....................$ 38.75 28.60 Group 2.....................$ 39.45 28.60 Group 3.....................$ 39.70 28.60 Group 4.....................$ 43.25 28.60

Hazardous waste removal work:

Work on a state or federally designated hazardous waste site, where the worker is required to wear Level A, B or C personal protection: $3.00 per hour additional.

Work on a state or federally designated hazardous waste site, where the worker is not required to wear Level A, B, or C personal protection: $1.00 per hour additional.

New Year's Day, President's Day, Memorial Day, Section 00 73 15 Page 13

Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day; provided that the worker works three days for the same employer within a period of ten working days consisting of five working days before and five working days after the day upon which the holiday falls or is observed.

Basic laborer; landscape laborer; railroad track laborer;

utility meter installer; traffic director/flag person;

salamander tender; pit person; dump person; asphalt laborer (only in Monmouth County); slurry seal laborer (only in Monmouth County); raker and tamper on cold patch work;

wrapper and coater of pipe; waterproofing laborer; timber person; powder carrier; magazine tender; signal person;

power buggy operator; tree cutter; and the operation of such other basic power tools used to perform work usually done manually by laborers

GROUP 2:

Pipelayer; laser person; conduit and duct line layer;

jackhammer; chipping hammer; pavement breaker; concrete cutter; asphalt cutter; sheet hammer operator;

sandblasting, acetylene cutting and burning; wagon drill operator; directional drill operator; hydraulic drill operator; drill master; core driller; traffic control coordinator; asphalt raker/lute person (only in Monmouth County); walk-behind saw cutter

GROUP 3:

Finisher; rammer; setter of brick or stone pavers;

hardscaping; gunite nozzle person; stonecutter; form setter; manhole; catch basin and inlet builder; asphalt screedperson (only in Monmouth County)

GROUP 4:

Blaster

LABO0172-003 03/01/2017

ATLANTIC, BURLINGTON, CAMDEN, CAPE MAY, CUMBERLAND, GLOUCESTER,

MERCER, OCEAN AND SALEM COUNTIES:

Laborers:

HIGHWAY CONSTRUCTION:

Section 00 73 15 Page 14

ASPHALT WORK:

GROUP 1....................$ 38.75 28.60

GROUP 2....................$ 39.45 28.60

GROUP 3....................$ 39.70 28.60

GROUP 4....................$ 43.25 28.60

PAID HOLIDAYS:

New Year's Day, President's Day, Memorial Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day; provided that the worker works three days for the same employer within a period of ten working days, consisting of five working days before and five working days after the day upon which the holiday falls or is observed.

Basic laborer; landscape laborer; railroad track laborer;

utility meter installer; traffic director/flag person;

salamander tender; pit person; dump person; asphalt laborer (only in Bergen, Essex, Hudson and Hunterdon Counties;

Middlesex County (north of the Raritan River); Morris, Passaic, Somerset, Sussex, Union and Warren Counties);

slurry seal laborer (only in Bergen, Essex, Hudson and Hunterdon Counties; Middlesex County (north of the Raritan River); Morris, Passaic, Somerset, Sussex, Union and Warren Counties); raker and tamper on cold patch work; wrapper and coater of pipe;…