W9128F21Q0012 - FP Bearing Repairs.pdf

COE FT PECK PROJECT OFFICE

DALE PUGH

USACE OMAHA CENWO-OD-FP

301 EAST KANSAS STREET

FORT PECK MT 59223-0208

TEL: 406-526-3514 FAX:

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

W9128F21Q0012 31-Dec-2020 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

U.S. ARMY CORPS OF ENGINEERS, OMAHA DIST

CONTRACTING OFFICE

1616 CAPITOL AVENUE

OMAHA NE 68102-4901

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

06-Jan-2021(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

402-995-2056NADINE L CATANIA

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

W9128F21Q0012

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot Spare Bearing

FFP

Contractor shall complete all work IAW the attached specifications to include shipping between the project and the Contractor's refurbishment workshop. The damaged bearing and spare bearing will both be shipped to the Contractor's factory at the same time, but the spare bearing shall be shipped back separately as soon as it is finished for installation in the unit.

FOB: Destination

PSC CD: Z2MD

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Lot Primary Bearing

FFP

Contractor shall complete all work IAW the attached specifications to include shipping between the project and the Contractor's refurbishment workshop. The damaged bearing and spare bearing will both be shipped to the Contractor's factory at the same time, but the spare bearing shall be shipped back separately as soon as it is finished for installation in the unit.

PSC CD: Z2MD

NET AMT

Section C - Descriptions and Specifications

SPECIFICATIONS

See attached Specifications named “Fort Peck U2 TGB Specifications”.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30 dys. ADC 1 COE FT PECK PROJECT OFFICE

DALE PUGH

USACE OMAHA CENWO-OD-FP

301 EAST KANSAS STREET

FORT PECK MT 59223-0208

406-526-3514

968609

0002 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

968609

Section H - Special Contract Requirements

WAGE DETERMINATION

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5396 Daniel W. Simms Division of | Revision No.: 12 Director Wage Determinations| Date Of Last Revision: 06/05/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Montana

Area: Montana Counties of Carter Custer Daniels Dawson Fallon Garfield McCone Phillips Powder River Prairie Richland Roosevelt Rosebud Sheridan Treasure Valley Wibaux

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.69 01012 - Accounting Clerk II 16.49 01013 - Accounting Clerk III 18.45 01020 - Administrative Assistant 22.81 01035 - Court Reporter 18.23 01041 - Customer Service Representative I 13.39 01042 - Customer Service Representative II 15.06 01043 - Customer Service Representative III 16.43 01051 - Data Entry Operator I 13.24 01052 - Data Entry Operator II 14.44 01060 - Dispatcher Motor Vehicle 22.13 01070 - Document Preparation Clerk 14.51 01090 - Duplicating Machine Operator 14.51 01111 - General Clerk I 13.30 01112 - General Clerk II 14.51 01113 - General Clerk III 16.29 01120 - Housing Referral Assistant 20.32 01141 - Messenger Courier 11.83 01191 - Order Clerk I 13.30 01192 - Order Clerk II 14.51 01261 - Personnel Assistant (Employment) I 16.29 01262 - Personnel Assistant (Employment) II 18.23 01263 - Personnel Assistant (Employment) III 20.32 01270 - Production Control Clerk 20.94

01290 - Rental Clerk 14.29 01300 - Scheduler Maintenance 16.29 01311 - Secretary I 16.29 01312 - Secretary II 18.23 01313 - Secretary III 20.32 01320 - Service Order Dispatcher 21.05 01410 - Supply Technician 22.81 01420 - Survey Worker 17.06 01460 - Switchboard Operator/Receptionist 14.13 01531 - Travel Clerk I 11.95 01532 - Travel Clerk II 12.71 01533 - Travel Clerk III 13.41 01611 - Word Processor I 14.51 01612 - Word Processor II 16.29 01613 - Word Processor III 18.23 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 20.17 05010 - Automotive Electrician 17.18 05040 - Automotive Glass Installer 15.99 05070 - Automotive Worker 15.99 05110 - Mobile Equipment Servicer 13.85 05130 - Motor Equipment Metal Mechanic 18.34 05160 - Motor Equipment Metal Worker 15.99 05190 - Motor Vehicle Mechanic 18.34 05220 - Motor Vehicle Mechanic Helper 12.78 05250 - Motor Vehicle Upholstery Worker 14.92 05280 - Motor Vehicle Wrecker 15.99 05310 - Painter Automotive 17.18 05340 - Radiator Repair Specialist 15.99 05370 - Tire Repairer 14.01 05400 - Transmission Repair Specialist 18.34 07000 - Food Preparation And Service Occupations 07010 - Baker 14.85 07041 - Cook I 13.43 07042 - Cook II 15.51 07070 - Dishwasher 9.92 07130 - Food Service Worker 11.15 07210 - Meat Cutter 15.99 07260 - Waiter/Waitress 9.40 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 23.38 09040 - Furniture Handler 17.43 09080 - Furniture Refinisher 23.38 09090 - Furniture Refinisher Helper 20.46 09110 - Furniture Repairer Minor 22.88 09130 - Upholsterer 23.38 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.19 11060 - Elevator Operator 14.50 11090 - Gardener 18.28 11122 - Housekeeping Aide 14.50 11150 - Janitor 14.50 11210 - Laborer Grounds Maintenance 14.23 11240 - Maid or Houseman 11.34 11260 - Pruner 12.58 11270 - Tractor Operator 17.23 11330 - Trail Maintenance Worker 14.23 11360 - Window Cleaner 16.35 12000 - Health Occupations 12010 - Ambulance Driver 16.05 12011 - Breath Alcohol Technician 19.50 12012 - Certified Occupational Therapist Assistant 26.58

12015 - Certified Physical Therapist Assistant 24.18 12020 - Dental Assistant 16.51 12025 - Dental Hygienist 35.76 12030 - EKG Technician 29.55 12035 - Electroneurodiagnostic Technologist 29.55 12040 - Emergency Medical Technician 16.05 12071 - Licensed Practical Nurse I 17.43 12072 - Licensed Practical Nurse II 19.50 12073 - Licensed Practical Nurse III 21.73 12100 - Medical Assistant 16.84 12130 - Medical Laboratory Technician 26.65 12160 - Medical Record Clerk 17.21 12190 - Medical Record Technician 19.26 12195 - Medical Transcriptionist 17.43 12210 - Nuclear Medicine Technologist 42.84 12221 - Nursing Assistant I 12.12 12222 - Nursing Assistant II 13.63 12223 - Nursing Assistant III 14.87 12224 - Nursing Assistant IV 16.69 12235 - Optical Dispenser 19.38 12236 - Optical Technician 17.43 12250 - Pharmacy Technician 16.85 12280 - Phlebotomist 17.31 12305 - Radiologic Technologist 27.94 12311 - Registered Nurse I 21.64 12312 - Registered Nurse II 26.47 12313 - Registered Nurse II Specialist 26.47 12314 - Registered Nurse III 32.02 12315 - Registered Nurse III Anesthetist 32.02 12316 - Registered Nurse IV 38.38 12317 - Scheduler (Drug and Alcohol Testing) 24.15 12320 - Substance Abuse Treatment Counselor 25.05 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 16.89 13012 - Exhibits Specialist II 20.92 13013 - Exhibits Specialist III 25.60 13041 - Illustrator I 16.93 13042 - Illustrator II 20.98 13043 - Illustrator III 25.60 13047 - Librarian 22.94 13050 - Library Aide/Clerk 12.47 13054 - Library Information Technology Systems 20.71 Administrator 13058 - Library Technician 14.21 13061 - Media Specialist I 14.94 13062 - Media Specialist II 16.72 13063 - Media Specialist III 18.64 13071 - Photographer I 15.46 13072 - Photographer II 17.98 13073 - Photographer III 22.28 13074 - Photographer IV 26.63 13075 - Photographer V 32.98 13090 - Technical Order Library Clerk 17.31 13110 - Video Teleconference Technician 14.97 14000 - Information Technology Occupations 14041 - Computer Operator I 14.20 14042 - Computer Operator II 15.88 14043 - Computer Operator III 17.71 14044 - Computer Operator IV 19.72 14045 - Computer Operator V 21.80 14071 - Computer Programmer I (see 1) 21.01 14072 - Computer Programmer II (see 1) 26.04

14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 14.20 14160 - Personal Computer Support Technician 19.72 14170 - System Support Specialist 26.13 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 30.52 15020 - Aircrew Training Devices Instructor (Rated) 36.92 15030 - Air Crew Training Devices Instructor (Pilot) 44.26 15050 - Computer Based Training Specialist / Instructor 30.52 15060 - Educational Technologist 25.07 15070 - Flight Instructor (Pilot) 44.26 15080 - Graphic Artist 20.12 15085 - Maintenance Test Pilot Fixed Jet/Prop 44.26 15086 - Maintenance Test Pilot Rotary Wing 44.26 15088 - Non-Maintenance Test/Co-Pilot 44.26 15090 - Technical Instructor 19.91 15095 - Technical Instructor/Course Developer 24.34 15110 - Test Proctor 16.06 15120 - Tutor 16.06 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 10.17 16030 - Counter Attendant 10.17 16040 - Dry Cleaner 11.61 16070 - Finisher Flatwork Machine 10.17 16090 - Presser Hand 10.17 16110 - Presser Machine Drycleaning 10.17 16130 - Presser Machine Shirts 10.17 16160 - Presser Machine Wearing Apparel Laundry 10.17 16190 - Sewing Machine Operator 12.20 16220 - Tailor 12.84 16250 - Washer Machine 10.65 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 28.46 19040 - Tool And Die Maker 35.26 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 19.84 21030 - Material Coordinator 24.12 21040 - Material Expediter 24.12 21050 - Material Handling Laborer 16.87 21071 - Order Filler 13.39 21080 - Production Line Worker (Food Processing) 19.84 21110 - Shipping Packer 17.66 21130 - Shipping/Receiving Clerk 17.66 21140 - Store Worker I 12.53 21150 - Stock Clerk 17.82 21210 - Tools And Parts Attendant 19.84 21410 - Warehouse Specialist 19.84 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 31.49 23019 - Aircraft Logs and Records Technician 24.20 23021 - Aircraft Mechanic I 29.74 23022 - Aircraft Mechanic II 31.49 23023 - Aircraft Mechanic III 33.31 23040 - Aircraft Mechanic Helper 20.66 23050 - Aircraft Painter 27.86 23060 - Aircraft Servicer 24.20 23070 - Aircraft Survival Flight Equipment Technician 27.86 23080 - Aircraft Worker 25.94

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.94 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 29.74

II

23110 - Appliance Mechanic 28.29 23120 - Bicycle Repairer 20.92 23125 - Cable Splicer 41.88 23130 - Carpenter Maintenance 22.02 23140 - Carpet Layer 26.50 23160 - Electrician Maintenance 33.22 23181 - Electronics Technician Maintenance I 26.50 23182 - Electronics Technician Maintenance II 28.46 23183 - Electronics Technician Maintenance III 30.39 23260 - Fabric Worker 24.73 23290 - Fire Alarm System Mechanic 30.39 23310 - Fire Extinguisher Repairer 22.94 23311 - Fuel Distribution System Mechanic 32.88 23312 - Fuel Distribution System Operator 25.27 23370 - General Maintenance Worker 18.42 23380 - Ground Support Equipment Mechanic 29.74 23381 - Ground Support Equipment Servicer 24.20 23382 - Ground Support Equipment Worker 25.94 23391 - Gunsmith I 22.94 23392 - Gunsmith II 26.50 23393 - Gunsmith III 30.39 23410 - Heating Ventilation And Air-Conditioning 24.60 Mechanic 23411 - Heating Ventilation And Air Contidioning 26.04 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 29.28 23440 - Heavy Equipment Operator 25.45 23460 - Instrument Mechanic 30.39 23465 - Laboratory/Shelter Mechanic 28.46 23470 - Laborer 16.87 23510 - Locksmith 27.57 23530 - Machinery Maintenance Mechanic 32.99 23550 - Machinist Maintenance 23.45 23580 - Maintenance Trades Helper 20.21 23591 - Metrology Technician I 30.39 23592 - Metrology Technician II 32.17 23593 - Metrology Technician III 34.03 23640 - Millwright 30.39 23710 - Office Appliance Repairer 28.46 23760 - Painter Maintenance 21.96 23790 - Pipefitter Maintenance 34.05 23810 - Plumber Maintenance 29.59 23820 - Pneudraulic Systems Mechanic 30.39 23850 - Rigger 30.39 23870 - Scale Mechanic 26.50 23890 - Sheet-Metal Worker Maintenance 29.84 23910 - Small Engine Mechanic 25.48 23931 - Telecommunications Mechanic I 31.98 23932 - Telecommunications Mechanic II 33.86 23950 - Telephone Lineman 29.71 23960 - Welder Combination Maintenance 25.72 23965 - Well Driller 31.01 23970 - Woodcraft Worker 30.39 23980 - Woodworker 22.94 24000 - Personal Needs Occupations 24550 - Case Manager 14.44 24570 - Child Care Attendant 11.16 24580 - Child Care Center Clerk 13.92

24610 - Chore Aide 11.53 24620 - Family Readiness And Support Services 14.44 Coordinator 24630 - Homemaker 14.44 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 30.39 25040 - Sewage Plant Operator 25.36 25070 - Stationary Engineer 30.39 25190 - Ventilation Equipment Tender 21.11 25210 - Water Treatment Plant Operator 25.36 27000 - Protective Service Occupations 27004 - Alarm Monitor 17.84 27007 - Baggage Inspector 13.73 27008 - Corrections Officer 20.17 27010 - Court Security Officer 20.94 27030 - Detection Dog Handler 15.36 27040 - Detention Officer 20.17 27070 - Firefighter 22.38 27101 - Guard I 13.73 27102 - Guard II 15.36 27131 - Police Officer I 21.49 27132 - Police Officer II 23.87 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 15.95 28042 - Carnival Equipment Repairer 17.34 28043 - Carnival Worker 11.68 28210 - Gate Attendant/Gate Tender 17.70 28310 - Lifeguard 15.16 28350 - Park Attendant (Aide) 19.81 28510 - Recreation Aide/Health Facility Attendant 14.47 28515 - Recreation Specialist 20.45 28630 - Sports Official 15.76 28690 - Swimming Pool Operator 20.03 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 28.27 29020 - Hatch Tender 28.27 29030 - Line Handler 28.27 29041 - Stevedore I 26.62 29042 - Stevedore II 30.65 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 17.81 30022 - Archeological Technician II 20.28 30023 - Archeological Technician III 24.67 30030 - Cartographic Technician 25.15 30040 - Civil Engineering Technician 21.97 30051 - Cryogenic Technician I 30.28 30052 - Cryogenic Technician II 33.45 30061 - Drafter/CAD Operator I 17.81 30062 - Drafter/CAD Operator II 20.28 30063 - Drafter/CAD Operator III 22.52 30064 - Drafter/CAD Operator IV 27.35 30081 - Engineering Technician I 14.19 30082 - Engineering Technician II 16.98 30083 - Engineering Technician III 19.00 30084 - Engineering Technician IV 23.55 30085 - Engineering Technician V 28.81 30086 - Engineering Technician VI 34.85 30090 - Environmental Technician 18.02 30095 - Evidence Control Specialist 27.33

30210 - Laboratory Technician 21.13 30221 - Latent Fingerprint Technician I 30.28 30222 - Latent Fingerprint Technician II 33.45 30240 - Mathematical Technician 23.76 30361 - Paralegal/Legal Assistant I 20.15 30362 - Paralegal/Legal Assistant II 24.96 30363 - Paralegal/Legal Assistant III 30.54 30364 - Paralegal/Legal Assistant IV 36.94 30375 - Petroleum Supply Specialist 33.45 30390 - Photo-Optics Technician 24.08 30395 - Radiation Control Technician 33.45 30461 - Technical Writer I 20.21 30462 - Technical Writer II 24.71 30463 - Technical Writer III 29.90 30491 - Unexploded Ordnance (UXO) Technician I 25.35 30492 - Unexploded Ordnance (UXO) Technician II 30.67 30493 - Unexploded Ordnance (UXO) Technician III 36.76 30494 - Unexploded (UXO) Safety Escort 25.35 30495 - Unexploded (UXO) Sweep Personnel 25.35 30501 - Weather Forecaster I 30.28 30502 - Weather Forecaster II 36.83 30620 - Weather Observer Combined Upper Air Or (see 2) 22.52 Surface Programs 30621 - Weather Observer Senior (see 2) 23.76 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.67 31020 - Bus Aide 12.39 31030 - Bus Driver 17.92 31043 - Driver Courier 16.63 31260 - Parking and Lot Attendant 14.61 31290 - Shuttle Bus Driver 18.08 31310 - Taxi Driver 12.98 31361 - Truckdriver Light 18.08 31362 - Truckdriver Medium 20.53 31363 - Truckdriver Heavy 25.56 31364 - Truckdriver Tractor-Trailer 25.56 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.95 99030 - Cashier 10.82 99050 - Desk Clerk 11.02 99095 - Embalmer 29.33 99130 - Flight Follower 25.35 99251 - Laboratory Animal Caretaker I 13.98 99252 - Laboratory Animal Caretaker II 15.19 99260 - Marketing Analyst 24.85 99310 - Mortician 29.33 99410 - Pest Controller 22.39 99510 - Photofinishing Worker 13.32 99710 - Recycling Laborer 20.07 99711 - Recycling Specialist 24.31 99730 - Refuse Collector 17.74 99810 - Sales Clerk 13.65 99820 - School Crossing Guard 14.24 99830 - Survey Party Chief 24.67 99831 - Surveying Aide 15.32 99832 - Surveying Technician 20.83 99840 - Vending Machine Attendant 19.51 99841 - Vending Machine Repairer 23.16 99842 - Vending Machine Repairer Helper 19.51

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal

Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: Life accident and health insurance plans sick leave pension plans civic and personal leave severance pay and savings and thrift plans.

Minimum employer contributions costing an average of $4.54 per hour computed on the basis of all hours worked by service employees employed on the contract.

HEALTH & WELFARE EO 13706: Minimum employer contributions costing an average of $4.

22 per hour computed on the basis of all hours worked by service employees employed on the covered contracts. *

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.

Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities.

JUL 2018

52.222-3 Convict Labor JUN 2003 52.222-21 Prohibition Of Segregated Facilities APR 2015 52.222-26 Equal Opportunity SEP 2016 52.222-41 Service Contract Labor Standards AUG 2018 52.222-50 Combating Trafficking in Persons OCT 2020 52.223-6 Drug-Free Workplace MAY 2001 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

JUN 2020

52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.232-18 Availability Of Funds APR 1984 52.232-33 Payment by Electronic Funds Transfer--System for Award

Management

OCT 2018

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.233-3 Protest After Award AUG 1996 52.242-15 Stop-Work Order AUG 1989 52.243-5 Changes and Changed Conditions APR 1984 52.244-6 Subcontracts for Commercial Items OCT 2020 52.246-4 Inspection Of Services--Fixed Price AUG 1996 52.249-1 Termination For Convenience Of The Government (Fixed

Price) (Short Form)

APR 1984

52.249-8 Default (Fixed-Price Supply & Service) APR 1984 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

DEC 2019

252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017 252.246-7008 Sources of Electronic Parts MAY 2018

CLAUSES INCORPORATED BY FULL TEXT

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/

(End of clause)

Section K - Representations, Certifications and Other Statements of Offerors

CLAUSES INCORPORATED BY REFERENCE

52.204-24 Representation Regarding Certain Telecommunications and

Video Surveillance Services or Equipment.

AUG 2020

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications.

JUN 2020

52.232-40 Providing Accelerated Payments to Small Business Subcontractors

DEC 2013

52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (DEC

2019)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representation. The Offeror represents that it [ ___ ] does, [ ___ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision)

Section L - Instructions, Conditions and Notices to Bidders

Instructions to Quoters – Other than Commercial Items

Please provide the following information with your quote:

Company’s Name as it appears on SAM:

Company’s Address as it appears on SAM:

CAGE CODE:

DUNS:

TIN:

NAICS. North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in FAR 52.204-8 of the solicitation.

Submitting your quote. Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations may be submitted on the SF 18, letterhead stationery, or as otherwise specified in the solicitation.

Quotations are due by 3pm (CST) on 6 January 2021. Send your completed quotation package to the attention of Nadine Catania at Nadine.L.Catania@usace.army.mil and Dan Monahan at Daniel.D.Monahan@usace.army.mil.

Electronic quotations are preferred over paper responses, unless other arrangements have been made with the individual identified above. You may submit more than one quote. If you do, we will evaluate each separately.

We will not consider any quote that we receive after the deadline unless we receive it before we issue a purchase order and considering it will not delay our purchase. In case of an emergency that delays our operations and makes submission or receipt of your quote impossible, we will extend the deadline by one working day.

As a minimum, quotations must show-

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of quotations;

(3) The name, address, and telephone number of the quoter;

(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) “Remit to” address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.204-8 if applicable.

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the quotation is not submitted on the SF 18, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

Terms and content of your quote. Your quote must be based on the terms of this RFQ. We might reject any quote that is not based on these terms in every respect. Your quote must contain all of the information described below.

Small Business Status. In order to submit a quote, you must know whether your company is a small business. The small business size standard that applies to this purchase is stated in FAR 52.204-8, along with the North American Industry Classification System (NAICS) code on which it is based.

Issuance of purchase order. Your quote should contain your best terms. The Contracting Officer may reject any or all quotes. After the evaluation of quotes, the Contracting Officer may negotiate final terms with one or more quoters of the Government’s choice before issuing a purchase order. The Contracting Officer will not negotiate with any quoters other than those of the Government’s choice and will not use the formal source selection procedures described in FAR Part 15.

The Contracting Officer may issue a purchase order to other than the quoter with the lowest price. We might issue multiple orders, purchasing various items or groups of items from different quoters. We might issue an order for less than the quantity on which your quote is based, at the quoted price, unless you tell us that you will not accept an order on that basis.

System for Award Management (SAM). Unless exempted by the Contracting Officer, you must register in SAM before we will issue a purchase order to you. If you do not register by the date set by the Contracting Officer, the Contracting Officer might issue the order to a different quoter. Once registered, you must remain registered throughout performance until final payment. Go to https://www.acquisition.gov for information on SAM registration and annual confirmation.

DUNS Number (Data Universal Numbering System Number). [This applies to all quote if the solicitation requires that you be registered in the System for Award Management (SAM).] Place the annotation “DUNS” or “DUNS+4” next to your name and address on the first page of your quote followed by the DUNS or DUNS+4 number that identifies the quoter’s name and address.

If you do not have a DUNS number, contact Dun and Bradstreet to obtain one. If you are located within the United States, you may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform.

If you are located outside the United States, you must contact the local Dun and Bradstreet office for a DUNS number. Tell Dun and Bradstreet that you are a quoter for a Government contract when contacting the local Dun and Bradstreet office.

The DUNS+4 is the DUNS number plus a 4-character suffix that you may use at your discretion to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for your company.

Insurance Required (FAR 52.228-5):

In accordance with FAR 28.307-2, “Liability,” the contractor shall procure the following minimum insurance:

Type Amount Workman’s Compensation and Employer’s Liability Insurance $100,000 General Liability Insurance $1,000,000 per occurrence

And, when automobiles are used in connection with performing the contract:

Type Amount

Automobile Liability Insurance $200,000 per person Bodily Injury $500,000 per occurrence Property Damage $ 20,000 per occurrence

And, when aircraft is used in connection with performing the contract:

Type Amount Aircraft Public and Passenger Liability Insurance $200,000 per person Bodily Injury (other than passenger injury) $500,000 per occurrence Property Damage $200,000 per occurrence Passenger Liability Bodily Injury $200,000 multiplied by the number of seats or passengers, whichever is greater

And, when contract performance involves use of vessels, the Contracting Officer shall require, as determined by the agency, vessel collision liability and protection and indemnity insurance. The contractor is responsible for contacting the state for compliance with its workman’s compensation laws.

State and Local Taxes. The U.S. Army Corps of Engineers is exempt from paying state and local taxes per Title 4 United States Code 104-107. The U.S. Army Corps of Engineers Tax ID Number is 62-1642142.

Contractors performing services for the U.S. Army Corps of Engineers are not exempt from state and local taxes in transactions with vendors, suppliers or subcontractors.

Section M - Evaluation Factors for Award

EVALUATION OF QUOTE

1. Past Performance – The offeror shall submit three (3) project examples that demonstrate experience with projects of similar scope, size and complexity to this requirement and that were completed within the past five (5) years from the date quotes are due.

Offeror shall provide dates and sufficient, pertinent information to demonstrate how the project examples are comparable to this requirement in scope, size and complexity. Project examples will be considered comparable if they include a minimum ID of greater than 16 inches and were centrifugally cast (spin cast) bearings.

Include references with the following information for each project example: names, titles, telephone numbers, and email addresses.

Project examples should be projects completed by the offeror as a prime contractor or projects completed by qualified subcontractors. If subcontractor project examples are submitted, include a signed teaming arrangement between the prime contractor and the subcontractor.

Additionally, past performance ratings may be based on the knowledge of the contracting officer, PM and technical team of past performance with similar contracts and any information contained in the Contract Performance Assessment Reporting System (CPARS) at www.cpars.gov, and/or Federal Awardee Performance and Integrity Information System (FAPIIS) at www.fapiis.gov.

The quoter may receive a rating of Exceptional for past performance that demonstrates successful completion of 2 project examples meeting the requirements above and the additional information retrieved from CPARS, FAPIIS and from the Contracting Officer is favorable. The quoter may receive a rating of Satisfactory for past performance that demonstrates at least 1 project example meeting the requirements above and the information from CPARS, FAPIIS and the Contracting Officer is favorable. The quoter may receive a rating of Unsatisfactory for past performance that does not demonstrate at least 1 project example meeting the requirements above or the information from CPARS, FAPIIS or the Contracting Officer is not favorable.

2. Price – The quote shall be inclusive of all costs to perform the work and shipping costs identified in the specifications and will be evaluated in accordance with FAR 13.106-3.

The award will be based on a best value trade-off determination where past performance is approximately equal to price.