W9127N-16-Q-0024_Q A_Responses.pdf
PDF 11 KB Posted
- Attached to
- Tailshaft Overhaul for Dredge Essayons
- Solicitation number
- W9127N-16-Q-0024
About this file
Questions and Answers
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W9127N-16-Q-0024_Q A_Responses.pdf | ||
| W9127N-16-Q-0024_Tailshaft_Overhaul_for_Essayons.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tailshaft Repair for Dredge Essayons
W9127N-16-Q-0024
Questions and Answers
1. Question: Can you send copies of the referenced drawings?
Answer: The drawings are not available for distribution. However, you can set up a site visit with Chris Gibbons, t.chris.gibbons@usace.army.mil, 503-808-5105, in order to view these documents.
2. Question: SOW States "Strut liner ID will need to be bored and honed to size. Is this in conjunction with the machining of the eroded area at stern liner?
Answer: No, The ID of the other two have been bored and honed.
3. Question: Do the other liners need to be bored & honed?
Answer: No, It is a newly Cast liner and neither the ID or OD has been machined.
4. Question: How thick will the "A36 Wedding Band" need to be?
Answer: The wedding band will require a .010" interference fit as listed in referenced PSI Drawing 27046-22885.
5. Question: Bolt Holes will be Counterbored.
Answer: They are to machine true the face of the counterbore.
6. Question: Will the Bolt Holes have to be re-bored?
Answer: No, just the face of the counterbore.
mailto:t.chris.gibbons@usace.army.mil
File details come from the government source that posted it. Updated .