W9127820R0066 Virtual Site Visit Slides - SATOC Seed Project.pdf

.59

“The views, opinions and findings contained in this report are those of the authors(s) and should not be construed as an official Department of the Army position, policy or decision, unless so designated by other official documentation.”

SINGLE-PHASE IDIQ/SATOC FOR SMALL CONSTRUCTION

REQUIREMENTS IN COLOMBIA, SOUTH AMERICA

INCLUDES SEED PROJECT:

REPAIR BASTION SYSTEM DEFENSIVE POSITIONS & CONSTRUCT

REINFORCED CONCRETE WALL, LA MACARENA, META COLOMBIA

U.S. ARMY

CORPS OF ENGINEERS

Pre-proposal Site Visit (12 MAY 2021)

BUILDING STRONG

Trusted Partners Delivering Value Today for a Better TomorrowTrusted Partners Delivering Value Today for a Better Tomorrow

Disclaimer

This pre-proposal site visit report is for informational purposes only.

Any measurements in this report are approximations only. Accuracy is not guaranteed and should not be relied upon. Any specifications or explanations in this report are strictly informational and will not change the terms and conditions of the solicitation. Offerors are cautioned to carefully read the requirements of the solicitation and comply accordingly. Nothing listed in this report is binding unless changes are incorporated by a written amendment.

File Name

2SEED PROJECT SCOPE OF WORK

The scope of work of this project has two main elements, REPAIR

BASTION SYSTEM DEFENSIVE POSITIONS & CONSTRUCT

REINFORCED CONCRETE (or CMU) WALL; each of them divided into two alternatives as described in the bidding schedule, specs sections 01 10 11 A and B, and as follows:

• DEFENSIVE POSITIONS

Bid schedule 2.A. Design-Build Repair Total Replacement of Bastion Systems, Defensive Positions.

Bid schedule 2.B. Design-Build Repair By Replacement of Fabric

Liners, Defensive Positions.

• WALL

Bid schedule 3.A. Design-Build Construct Reinforced Concrete Wall.

Bid schedule 3.B. Design-Build Construct CMU Wall.

Site Location

• Three (3) Defensive Positions in the La Macarena Base.

• Each position is constructed with bastion walls modules with the following composition:

- Length (13 modules) x width (8 modules) x height (4 modules).

- Each module with the following dimensions: width (0.62 m.) x length (0.62 m.) x height (1.10 m.).

• Scope of work is detailed in spec sections 01 10 11 A of the RFP package for alternatives A and B.

DEFENSIVE POSITIONS (2.A. AND 2.B.)

Additional Locations Pictures

DEFENSIVE POSITIONS (2.A. AND 2.B.)

Site Location

• Protective wall is to be constructed in the area shown, between the building and the chain link fence.

• Dimensions: for the reinforced concrete alternative: length (25 m.) x height (3.5 m.) x thickness (.356 m.).

For the CMU alternative, the thickness must be equivalent to the 0.356 m. when constructed with reinforced concrete.

• Level 0.0 of wall must be the same as the floor level of the adjacent building.

• Outer face of wall must be separated at least two meters from chain link fence.

• Ends of wall must exceed in 1 m. on each side the length of adjacent building.

• Scope of work is detailed in spec section 01 10 11 B of the RFP package for alternatives A and B.

WALL (3.A. AND 3.B.)

Temporary facilities and storage area

• Available area adjacent to the construction area for the wall for the construction of temporary facilities and Storage of materials.

Additional Pictures