AM01.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

1 3

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE 4. REQUISITION/PURCHASE 5. PROJECT NO. (If applicable)

W9127820R0001-0001 4 FEB 2020 MEF19008

6. ISSUED BY CODE 7. ADMINISTERED BY(If other than item 6)

CODE

Corps of Engineers 109 St. Joseph St.

Mobile, AL 36602

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP code) 9A. AMENDMENT OF SOLICITATION

NO.

W9127820R0001

9B. DATED (SEE ITEM 11)

15 JAN 2020

10A. MODIFICATION OF

CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE

FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority)

THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO AUTHORITY OF FAR 43.103(b)

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

The subject solicitation for: CONSOLIDATED GULF RANGE OPERATIONS CENTER (GROC) FACILITY/CONSOLIDATED TELEMETRY

RANGE OPERATIONS CENTER (TROC) FACILITY, EGLIN AIR FORCE BASE, FLORIDA

Is modified in the following: REFER TO THE ENCLOSED REVISED & ADDED SPECIFICATION/DRAWING REVISIONS FOR

AMENDMENT NO. 0001

Except as provided herein, all terms and conditions of the document reference in item 9A or 10A, as Heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICE (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

BY

(Signature of contracting officer)

16C. DATE SIGNED

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV. 10-83)

PREVIOUS EDITION UNUSABLE Prescribed by GSA

CONSOLIDATED GULF RANGE OPERATIONS CENTER FACILITY/CONSOLIDATED W9127820R0001

TELEMETRY RANGE OPERATIONS CENTER FACILITY, EGLIN AFB, FLORIDA MEF19008

SF 30 Page 2

W9127820R0001-0001

PART I - REVISIONS MADE BY ADDED AND/OR REPLACEMENT PARAGRAPHS/PAGES/SECTIONS

The items listed below are to be replaced by the corresponding added and/or revised paragraphs/pages or sections. Added and/or revised paragraphs/pages or sections are indicated by a note in bottom right hand corner of each paragraph or page. Added sections are hereby made a part of the contract and are to be inserted in the specification in the proper numerical/alphabetical sequence.

Within the specifications, deletions from the specifications are indicated by strikethrough, e.g.: deletions are marked with strikethrough and additions to the specifications including revisions/substitutions are indicated in bold, italic and underlined, e.g.: additions are indicated thus.

Corresponding Added or Revised Paragraph SECTION Page, and/or Section

VOLUME 1

Table of Contents Revised as indicated herein.

01 00 00 Revised Paragraph 1.5

01 33 00 Added Submittal Register associated with Section 10 44 16 Replaced Submittal Register associated with Section 23 00 00

01 35 26 Revised Paragraph 1.6.1.1.1

VOLUME 2

10 14 00.10 Revised Paragraph 2.1 and all subparagraphs of

Paragraph 2.1 as indicated herein.

10 44 16 Added in its entirety

23 00 00 Replaced in its entirety

VOLUME 3

26 32 15.00 10 Revised Paragraph 2.1.9

26 32 33.00 10 Revised Paragraphs 2.4.1 and 2.4.2

PART II - NOTE: Revised drawings are listed below. These revised drawings are to be inserted into the folio in the proper numerical sequence. Drawings that have been revised by this amendment shall be deleted from the folio. All drawings listed below are revised unless indicated otherwise.

Sheet Reference Number Title

COVER

G-101 TROC - LIFE SAFETY FLOOR PLAN

G-102 GROC - LIFE SAFETY FLOOR PLAN

GC003 STAGING AND LAY DOWN PLAN

SF 30 Page 3

W9127820R0001-0001

CI001 GENERAL CIVIL NOTES

CG102 PAVING, GRADING AND DRAINAGE PLAN NORTHWEST BASE BID

CG103 PAVING, GRADING AND DRAINAGE PLAN NORTHEAST BASE BID

CG104 PAVING, GRADING AND DRAINAGE PLAN SOUTHWEST BASE BID

CG105 PAVING, GRADING, AND DRAINAGE PLAN NORTHWEST WITH BID OPTIONS

CG106 PAVING, GRADING, AND DRAINAGE PLAN NORTHEAST WITH BID OPTIONS

CG107 PAVING, GRADING, AND DRAINAGE PLAN SOUTHWEST WITH BID OPTIONS

A-102 TROC - FLOOR PLAN

A-104 GROC - FLOOR PLAN

A-140 TROC - ROOF PLAN

A-141 GROC - ROOF PLAN

A-310 WALL SECTIONS

M-003 MECHANICAL TROC SCHEDULES

M-005 MECHANICAL GROC SCHEDULES

M-102 TROC - MECHANICAL PLANS

M-103 GROC - MECHANICAL PLANS

M-504 MECHANICAL DETAILS

M-505 MECHANICAL DETAILS

M-604 MECHANICAL CONTROLS

ES101 ELECTRICAL SITE PLAN

E-601 TROC SINGLE LINE DIAGRAM

Encl as stated:

Revised and replaced pages of the specifications as indicated in Part I.

25 Revised drawings as indicated in Part II.

This page was intentionally left blank for duplex printing.

Table of Contents Page 1 Amendment No. W9127820R0001-0001

TABLE OF CONTENTS

VOLUME 1 OF 5

CHECKLIST FOR PREPARATION OF OFFERS

BIDDING REQUIREMENTS

STANDARD FORM 1442 - SOLICITATION, OFFER, AND AWARD

BIDDING SCHEDULE

EXPLANATION OF BID ITEMS

STANDARD FORM 24 - BID BOND

STANDARD FORM 28 - AFFIDAVIT OF INDIVIDUAL SURETY

STANDARD FORM LLL - DISCLOSURE OF LOBBYING ACTIVITIES

00 11 00 PROPOSAL SUBMISSION REQUIREMENTS AND INSTRUCTIONS

00 12 00 EVALUATION CRITERIA AND BASIS OF AWARD

00 21 16 INSTRUCTIONS TO PROPOSERS

00 45 00 REPRESENTATIONS AND CERTIFICATIONS

00 70 00 CONDITIONS OF THE CONTRACT

CESAM FORM 1151, PROMPT PAYMENT CERTIFICATION AND SUPPORTING

DATA FOR CONTRACTOR PROGRESS PAYMENT INVOICE

SPECIFICATIONS

DIVISION 01 - GENERAL REQUIREMENTS

01 00 00 ADDITIONAL SPECIAL CONTRACT REQUIREMENTS

EGLIN BASE ACCESS REQUIREMENTS

PROJECT SIGNS

DD FORM 1354

DD FORM 1354 CHECKLIST

WAGE RATES

01 00 01 GENERAL CONTRACT REQUIREMENTS

01 11 00 SUMMARY OF WORK

01 32 01.00 10 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

SUBMITTAL REGISTER

FORM 4025

01 33 29 SUSTAINABILITY REQUIREMENTS

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 45 00.15 10 RESIDENT MANAGEMENT SYSTEM CONTRACTOR MODE (RMS CM)

SAM FORM 696

01 45 35 SPECIAL INSPECTIONS

01 57 19 TEMPORARY ENVIRONMENTAL CONTROL - EGLIN STANDARD

01 74 19 CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL

01 78 23 OPERATION AND MAINTENANCE DATA

01 91 00.15 10 TOTAL BUILDING COMMISSIONING

DIVISION 02 – EXISTING CONDITIONS

02 41 00 DEMOLITION AND DECONSTRUCTION

Table of Contents Page 2

DIVISION 03 – CONCRETE

03 30 00 CAST-IN-PLACE CONCRETE

DIVISION 04 – MASONRY

04 20 00 UNIT MASONRY

DIVISION 05 – METALS

05 40 00 COLD-FORMED METAL FRAMING

05 50 13 MISCELLANEOUS METAL FABRICATIONS

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES

06 10 00 ROUGH CARPENTRY

06 41 16.00 10 PLASTIC-LAMINATE-CLAD ARCHITECTURAL CABINETS

06 61 16 SOLID SURFACING FABRICATIONS

VOLUME 2 OF 5

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

07 05 23 PRESSURE TESTING AN AIR BARRIER SYSTEM FOR AIR TIGHTNESS

07 21 13 BOARD AND BLOCK INSULATION

07 21 16 MINERAL FIBER BLANKET INSULATION

07 27 10.00 10 BUILDING AIR BARRIER SYSTEM

07 27 26 FLUID-APPLIED MEMBRANE AIR BARRIERS

07 42 14 INSULATED METAL WALL PANELS

07 60 00 FLASHING AND SHEET METAL

07 72 00 ROOFTOP FALL PROTECTION AND ACCESSORIES

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 08 – OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 14 00 WOOD DOORS

08 41 13 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

08 91 00 METAL WALL LOUVERS

DIVISION 09 – FINISHES

09 06 00 SCHEDULES FOR FINISHES

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 29 00 GYPSUM BOARD

09 30 10 CERAMIC TILING

09 51 00 ACOUSTICAL CEILINGS

09 65 00 RESILIENT FLOORING

09 68 00 CARPETING

09 90 00 PAINTS AND COATINGS

Table of Contents Page 3

DIVISION 10 – SPECIALTIES

10 14 00.10 EXTERIOR SIGNAGE

10 14 02 INTERIOR SIGNAGE

10 21 13 TOILET COMPARTMENTS

10 26 00 WALL AND CORNER PROTECTION

10 28 13 TOILET ACCESSORIES

10 44 16 FIRE EXTINGUISHERS

DIVISION 12 – FURNISHINGS

12 24 13 ROLLER WINDOW SHADES

12 48 13 ENTRANCE FLOOR MATS AND FRAMES

12 50 00.13 10 FURNITURE, FIXTURES, AND EQUIPMENT

12 59 00 SYSTEMS FURNITURE

DIVISION 13 – SPECIAL CONSTRUCTION

13 12 20 EXTRUDED ALUMINUM CANOPY SYSTEM

13 34 19 METAL BUILDING SYSTEMS

DIVISION 21 - FIRE SUPPRESSION

21 13 13.00 10 WET PIPE SPRINKLER SYSTEM, FIRE PROTECTION

DIVISION 22 - PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

DIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING (HVAC)

23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 09 00 INSTRUMENTATION AND CONTROL FOR HVAC

23 09 13 INSTRUMENTATION AND CONTROL DEVICES FOR HVAC

23 09 23.02 BACNET DIRECT DIGITAL CONTROL FOR HVAC AND OTHER BUILDING

CONTROL SYSTEMS

23 64 10 WATER CHILLERS, VAPOR COMPRESSION TYPE

23 64 26 CHILLED, CHILLED-HOT, AND CONDENSER WATER PIPING SYSTEMS

23 81 00 DECENTRALIZED UNITARY HVAC EQUIPMENT

VOLUME 3 OF 5

DIVISION 25 – INTEGRATED AUTOMATION

25 10 10 UTILITY MONITORING AND CONTROL SYSTEM (UMCS) FRONT END AND

INTEGRATION

DIVISION 26 - ELECTRICAL

26 00 00.00 20 BASIC ELECTRICAL MATERIALS AND METHODS

26 08 00 APPARATUS INSPECTION AND TESTING

26 12 19.10 THREE-PHASE PAD-MOUNTED TRANSFORMERS

26 20 00 INTERIOR DISTRIBUTION SYSTEM

26 29 23 VARIABLE FREQUENCY DRIVE SYSTEMS UNDER 600 VOLTS

26 32 15.00 10 DIESEL-GENERATOR SET STATIONARY 100-2500 KW, WITH AUXILIARIES

Table of Contents Page 4

DIVISION 26 – ELECTRICAL (CONTINUED)

26 32 33.00 10 UNINTERRUPTIBLE POWER SUPPLY (UPS) SYSTEM ABOVE 15 KVA

CAPACITY

26 36 00.00 10 AUTOMATIC TRANSFER SWITCH AND BY-PASS/ISOLATION SWITCH

26 41 00 LIGHTNING PROTECTION SYSTEM

26 42 14.00 10 CATHODIC PROTECTION SYSTEM (SACRIFICIAL ANODE)

26 51 00 INTERIOR LIGHTING

26 56 00 EXTERIOR LIGHTING

DIVISION 27 - COMMUNICATIONS

27 10 00 BUILDING TELECOMMUNICATIONS CABLING SYSTEM

DIVISION 28 - ELECTRONIC SAFETY AND SECURITY

28 10 05 ELECTRONIC SECURITY SYSTEMS (ESS)

28 31 76 INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM

DIVISION 31 – EARTHWORK

31 00 00 EARTHWORK

31 11 00 CLEARING AND GRUBBING

31 23 00.00 20 EXCAVATION AND FILL

31 31 16.13 CHEMICAL TERMITE CONTROL

DIVISION 32 – EXTERIOR IMPROVEMENTS

32 01 19 FIELD FORMED SEALANTS FOR SEALING JOINTS IN RIGID PAVEMENTS

32 11 23 AGGREGATE BASE COURSES

32 12 16 HOT MIX ASPHALT (HMA) FOR ROADS

32 16 19 CONCRETE CURBS, GUTTERS AND SIDEWALKS

32 17 23 PAVEMENT MARKINGS

32 31 19 VERTICAL SLAT FENCING

32 92 23 SODDING

32 93 00 EXTERIOR PLANTS

DIVISION 33 - UTILITIES

33 11 00 WATER UTILITY DISTRIBUTION PIPING

33 40 00 STORM DRAINAGE UTILITIES

33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION

33 82 00 TELECOMMUNICATIONS OUTSIDE PLANT (OSP)

VOLUME 4 OF 5

APPENDICES

APPENDIX A FURNITURE, FIXTURES AND EQUIPMENT (FFE)

APPENDIX B BORING LOGS

APPENDIX C 96TH COMMUNICATIONS SQUADRON CYBER INFRASTRUCTURE DESIGN

GUIDE APRIL 2019

APPENDIX D AF FORM 103, BASE CIVIL ENGINEERING WORK CLEARANCE REQUEST

APPENDIX E AF 813 ENVIRONMENTAL IMPACT ANALYSIS

APPENDIX F AMERICAN STATES UTILITY SERVICES, INC. (ASUS)

STANDARD DETAILS AND SPECIFICATIONS - WATER AND SEWER

Table of Contents Page 5

VOLUME 5 OF 5

APPENDICES (CONTINUED)

APPENDIX G CHOCTAWHATCHEE ELECTRIC COOPERATIVE, INC. (CHELCO)

EGLIN AFB CONSTRUCTION STANDARDS

APPENDIX H EGLIN BEST PRACTICE 1 – TEMPLATE FOR SMS BUILDER

--End of Project Table of Contents--

SECTION 01 00 00

Revised by Amendment No. W9127820R0001-0001

SECTION 01 00 00

1.5 CONSTRUCTION PROJECT MANAGER NOT USED

Construction Project Manager shall be onsite and dedicated to only this contract.

(NOTE: The remainder of the section is unchanged by the amendment.)

SUBMITTAL FORM,Jan 96 PREVIOUS EDITION IS OBSOLETE PAGE 1 OF 1 PAGES

Consolidated GROC/TROC Facilities, Eglin AFB, FL

10 44 16 SD-01 Preconstruction Submittals

2.1.1 GManufacturer's Data

SD-03 Product Data

2.1.1 GFire Extinguishers

GAccessories GCabinets GReplacement Parts List

SD-07 Certificates

2.1.1 GFire Extinguishers

2.1.1 GManufacturer's Warranty with

Inspection Tag

SUBMITTAL REGISTER

CONTRACT NO.

TITLE AND LOCATION CONTRACTOR

CONTRACTOR:

SCHEDULE DATES

CONTRACTOR

ACTION

APPROVING AUTHORITY

A C T I V I T Y

N O

T R A N S M I T T A L

N O

S P E C

S E C T

DESCRIPTION

ITEM SUBMITTED

P A R A G R A P H

C L A S S I F I C A T I O N

G O V T

O R

A E

R E V W

R SUBMIT

APPROVAL

NEEDED

BY

MATERIAL

NEEDED

BY

A C T I O N

C O D E

DATE

OF

ACTION

DATE FWD

TO APPR

AUTH/

DATE RCD

FROM

CONTR

DATE FWD

TO OTHER

REVIEWER

DATE RCD

FROM OTH

REVIEWER

A C T I O N

C O D E

DATE

OF

ACTION

MAILED

TO

CONTR/

DATE RCD

FRM APPR

AUTH REMARKS

(a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r)

Added by Amendment No. W9127820R0001-0001

SUBMITTAL FORM,Jan 96 PREVIOUS EDITION IS OBSOLETE PAGE 1 OF 2 PAGES

23 00 00 SD-02 Shop Drawings

1.4.4 GDetail Drawings

SD-03 Product Data 2.8.1.1Insulated Nonmetallic Flexible

Duct Runouts 2.8.1.1Duct Connectors

2.8.2 GDuct Access Doors

2.8.3 GManual Balancing Dampers

2.8.6.1Diffusers 2.8.6.2Registers and Grilles 2.8.7Air Vents, Penthouses, and

Goosenecks

2.10 GAir Handling Units

2.11.1 GFan-Coil Units

2.11.2.1 GVariable Volume, Single Duct

Terminal Units

2.11.2.2 GReheat Units

2.8.1 SIndoor Air Quality for Duct

Sealants SD-06 Test Reports

3.12 GPerformance Tests

3.10 GDamper Acceptance Test

SD-07 Certificates 1.4.3Ozone Depleting Substances

Technician Certification SD-08 Manufacturer’s Instructions

SUBMITTAL REGISTER

CONTRACT NO.

TITLE AND LOCATION CONTRACTOR

CONTRACTOR:

SCHEDULE DATES

CONTRACTOR

ACTION

APPROVING AUTHORITY

A C T I V I T Y

N O

T R A N S M I T T A L

N O

S P E C

S E C T

DESCRIPTION

ITEM SUBMITTED

P A R A G R A P H

C L A S S I F I C A T I O N

G O V T

O R

A E

R E V W

R SUBMIT

APPROVAL

NEEDED

BY

MATERIAL

NEEDED

BY

A C T I O N

C O D E

DATE

OF

ACTION

DATE FWD

TO APPR

AUTH/

DATE RCD

FROM

CONTR

DATE FWD

TO OTHER

REVIEWER

DATE RCD

FROM OTH

REVIEWER

A C T I O N

C O D E

DATE

OF

ACTION

MAILED

TO

CONTR/

DATE RCD

FRM APPR

AUTH REMARKS

Replaced by Amendment No. W9127820R0001-0001

SUBMITTAL FORM,Jan 96 PREVIOUS EDITION IS OBSOLETE PAGE 2 OF 2 PAGES

23 00 00 3.2Manufacturer's Installation Instructions

3.14.2Operation and Maintenance Training

SD-10 Operation and Maintenance Data

3.14.1 GOperation and Maintenance

Manuals

2.8.3 GManual Balancing Dampers

2.9.1.1 GIn-Line Centrifugal Fans

2.9.1.2 GCeiling Exhaust Fans

2.10 GAir Handling Units

2.11.1 GFan-Coil Units

2.11.2.1 GVariable Volume, Single Duct

Terminal Units

2.11.2.2 GReheat Units

SD-11 Closeout Submittals

3.13 SIndoor Air Quality During

Construction

SUBMITTAL REGISTER

CONTRACT NO.

TITLE AND LOCATION CONTRACTOR

CONTRACTOR:

SCHEDULE DATES

CONTRACTOR

ACTION

APPROVING AUTHORITY

A C T I V I T Y

N O

T R A N S M I T T A L

N O

S P E C

S E C T

DESCRIPTION

ITEM SUBMITTED

P A R A G R A P H

C L A S S I F I C A T I O N

G O V T

O R

A E

R E V W

R SUBMIT

APPROVAL

NEEDED

BY

MATERIAL

NEEDED

BY

A C T I O N

C O D E

DATE

OF

ACTION

DATE FWD

TO APPR

AUTH/

DATE RCD

FROM

CONTR

DATE FWD

TO OTHER

REVIEWER

DATE RCD

FROM OTH

REVIEWER

A C T I O N

C O D E

DATE

OF

ACTION

MAILED

TO

CONTR/

DATE RCD

FRM APPR

AUTH REMARKS

Replaced by Amendment No. W9127820R0001-0001

SECTION 01 35 26

SECTION 01 35 26

1.6.1.1.1 Additional Site Safety and Health Officer (SSHO) Requirements and Duties

The SSHO may not serve as the Quality Control Manager. The SSHO may not serve as the Superintendent.

SECTION 10 14 00.10

SECTION 10 14 00.10

2.1 MODULAR EXTERIOR SIGNAGE SYSTEM

Exterior signage must consist of a system of coordinated directional, identification, and regulatory type signs located where shown. Dimensions, details, materials, message content, and design of signage must be as shown. Submit manufacturer's descriptive data and catalog cuts.

2.1.1 Panel And Post/Panel Type Signs

2.1.1.1 Posts

One-piece aluminum or galvanized steel posts must be provided with minimum

0.125 inch wall thickness. Posts must be designed to accept panel framing system described. The post must be designed to permit attachment of panel framing system without exposed fasteners. Caps must be provided for each post.

2.1.1.2 Panel Framing System

Panel framing consisting of aluminum sections and interlocking track components must be designed to interlock with posts with concealed fasteners.

2.1.1.3 Panels

Modular message panels must be provided in sizes shown on drawings. Panels must be fabricated a minimum of 0.125 inch aluminum. Panels with metal return sheeting shall have welded corners, ground smooth.

2.1.1.4 Finishes

Post finish must be semi-gloss baked enamel or two-component acrylic polyurethane . Metal panel system finish must be baked enamel or two-component acrylic polyurethane.

2.1.1.5 Mounting

Provide permanent mounting by embedding posts in concrete foundation as indicated.

2.1 BUILDING-MOUNTED SIGNAGE

2.1.1 Metal Plaques

Design and location of plaques shall be as indicated. Panels shall be fabricated a minimum of 0.125 inch aluminm. Panels with metal return sheeting shall have welded corners ground smooth.

2.1.2 Dimensional Building Letters

2.1.2.1 Fabrication

Letters shall be fabricated from cast aluminum . Letters shall be cleaned by chemical etching or cleaned ultrasonically in a special degreasing bath. Letters shall be packaged for protection until installation.

SECTION 10 14 00.10

2.1.2.2 Typeface

Typeface shall be helvetica medium.

2.1.2.3 Size

Letter size shall be as indicated.

2.1.2.4 Finish

Baked enamel or two-component acrylic polyurethane finish shall be provided.

2.1.2.5 Mounting

Threaded studs of number and size as recommended by manufacturer, shall be used for concealed anchorage. Letters which project from the building line shall have stud spacer sleeves. Letters, studs, and sleeves shall be of the same material. Supply templates for mounting.

CONSOLI DATED GULF RANGE OPERATI ONS CENTER FACI LI TY/ CONSOLI DATED W9127820R0001

TELEMETRY RANGE OPERATI ONS CENTER FACI LI TY, EGLI N AFB, FLORI DA MEF19008

SECTI ON 10 44 16

FI RE EXTI NGUI SHERS

05/15

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 1 ( 2018) Fi r e Code

NFPA 10 ( 2018; TI A 18- 1) St andar d f or Por t abl e Fi r e Ext i ngui sher s

NFPA 101 ( 2018) Li f e Saf et y Code

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

29 CFR 1910. 157 ( 2003) Por t abl e Fi r e Ext i ngui sher s

UNDERWRI TERS LABORATORI ES ( UL)

UL 2129 ( 2017) UL St andar d f or Saf et y Hal ocar bon Cl ean Agent Fi r e Ext i ngui sher s

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment .

Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y Not ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 01 Pr econst r uct i on Submi t t al s

Manuf act ur er ' s Dat a; G

SD- 03 Pr oduct Dat a

Fi r e Ext i ngui sher s; G

Accessor i es; G

Cabi net s; G

Repl acement Par t s Li st ; G

SD- 07 Cer t i f i cat es

Fi r e Ext i ngui sher s; G

SECTI ON 10 44 16 Page 1 Added i n i t s ent i r et y by Amendment No. W9127820R0001- 0001

Manuf act ur er ' s War r ant y wi t h I nspect i on Tag; G

1. 3 DELI VERY, STORAGE, AND HANDLI NG

Pr ot ect mat er i al s f r om weat her , soi l , and damage dur i ng del i ver y, s t or age, and const r uct i on.

Del i ver mat er i al s i n t hei r or i gi nal packages, cont ai ner s, or bundl es bear i ng t he br and name and t he name and t ype of t he mat er i al .

1. 4 WARRANTY

Guar ant ee t hat Fi r e Ext i ngui sher s ar e f r ee of def ect s i n mat er i al s, f abr i cat i on, f i ni sh, and i nst al l at i on and t hat t hey wi l l r emai n so f or a per i od of not l ess t han f i ve year s af t er compl et i on. PART 2 PRODUCTS

2. 1 SYSTEM DESCRI PTI ON

2. 1. 1 Types

Submi t cer t i f i cat es t hat show f i r e ext i ngui sher s compl y wi t h appl i cabl e codes and r egul at i ons.

Pr ovi de f i r e ext i ngui sher s conf or mi ng t o NFPA 10. Pr ovi de quant i t y and pl acement i n compl i ance wi t h t he appl i cabl e sect i ons of NFPA 1, NFPA 101 and 29 CFR 1910. 157.

Pr ovi de c l ean agent t ype f i r e ext i ngui sher s compl i ant wi t h UL 2129. Cl ean agent f i r e ext i ngui sher s shal l be HCF- 236f a, Ansul Cl eanguar d Cl ean Agent Por t abl e Ext i ngui sher s or appr oved equi val ent .

Submi t manuf act ur er ' s dat a f or each t ype of Fi r e Ext i ngui sher r equi r ed, det ai l i ng al l r el at ed cabi net , wal l mount i ng and accessor i es i nf or mat i on, compl et e wi t h manuf act ur er ' s war r ant y wi t h i nspect i on t ag.

2. 1. 2 Material

Pr ovi de enamel ed st eel ext i ngui sher shel l .

2. 1. 3 Size

Cl ean agent t ype f i r e ext i ngui sher s shal l be r at ed 2A: 10B: C

2. 1. 4 Accessories

Pr essur e gauge

2. 2 EQUIPMENT

2. 2. 1 Cabinets

2. 2. 1. 1 Material

Pr ovi de enamel ed st eel cabi net s.

2. 2. 1. 2 Type

Pr ovi de sur f ace t ype cabi net s.

SECTI ON 10 44 16 Page 2

2. 2. 1. 3 Size

Di mensi on cabi net s t o accommodat e t he speci f i ed f i r e ext i ngui sher s.

PART 3 EXECUTI ON

3. 1 INSTALLATION

Fi r e ext i ngui sher s wher e i ndi cat ed on t he dr awi ngs. Ver i f y exact l ocat i ons pr i or t o i nst al l at i on.

Pr ovi de ext i ngui sher s whi ch ar e f ul l y char ged and r eady f or oper at i on upon i nst al l at i on. Pr ovi de ext i ngui sher s compl et e wi t h Manuf act ur er ' s War r ant y wi t h I nspect i on Tag at t ached.

Compl y wi t h t he manuf act ur er ' s r ecommendat i ons f or al l i nst al l at i ons.

3. 2 PROTECTION

3. 2. 1 Repairing

Remove and r epl ace damaged and unaccept abl e por t i ons of compl et ed wor k wi t h new wor k at no addi t i onal cost t o t he Gover nment .

3. 2. 2 Cleaning

Cl ean al l sur f aces of t he wor k, and adj acent sur f aces whi ch ar e soi l ed as a r esul t of t he wor k. Remove f r om t he s i t e al l const r uct i on equi pment , t ool s, sur pl us mat er i al s and r ubbi sh r esul t i ng f r om t he wor k.

- - End of Sect i on - -

SECTI ON 10 44 16 Page 3

SECTI ON 23 00 00

AI R SUPPLY, DI STRI BUTI ON, VENTI LATI ON, AND EXHAUST SYSTEMS

08/18

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

AI R MOVEMENT AND CONTROL ASSOCI ATI ON I NTERNATI ONAL, I NC. ( AMCA)

AMCA 201 ( 2002; R 2011) Fans and Syst ems

AMCA 210 ( 2016) Labor at or y Met hods of Test i ng Fans f or Aer odynami c Per f or mance Rat i ng

AMCA 300 ( 2014) Rever ber ant Room Met hod f or Sound Test i ng of Fans

AMCA 301 ( 2014) Met hods f or Cal cul at i ng Fan Sound Rat i ngs f r om Labor at or y Test Dat a

AMCA 500- D ( 2018) Labor at or y Met hods of Test i ng Damper s f or Rat i ng

AI R- CONDI TI ONI NG, HEATI NG AND REFRI GERATI ON I NSTI TUTE ( AHRI )

AHRI 410 ( 2001; Addendum 1 2002; Addendum 2 2005;

Addendum 3 2011) For ced- Ci r cul at i on Ai r - Cool i ng and Ai r - Heat i ng Coi l s

AHRI 440 ( 2008) Per f or mance Rat i ng of Room Fan- Coi l s

AHRI 880 I - P ( 2011) Per f or mance Rat i ng of Ai r Ter mi nal s

AHRI 885 ( 2008; Addendum 2011) Pr ocedur e f or Est i mat i ng Occupi ed Space Sound Level s i n t he Appl i cat i on of Ai r Ter mi nal s and Ai r Outlets

AHRI Gui del i ne D ( 1996) Appl i cat i on and I nst al l at i on of Cent r al St at i on Ai r - Handl i ng Uni t s

AMERI CAN BEARI NG MANUFACTURERS ASSOCI ATI ON ( ABMA)

ABMA 11 ( 2014) Load Rat i ngs and Fat i gue Li f e f or Rol l er Bear i ngs

ABMA 9 ( 2015) Load Rat i ngs and Fat i gue Li f e f or Bal l Bear i ngs

SECTI ON 23 00 00 Page 1 Repl aced i n i t s ent i r et y by Amendment No. W9127820R0001- 0001

AMERI CAN SOCI ETY OF HEATI NG, REFRI GERATI NG AND AI R- CONDI TI ONI NG

ENGI NEERS ( ASHRAE)

ASHRAE 52. 2 ( 2012) Met hod of Test i ng Gener al Vent i l at i on Ai r - Cl eani ng Devi ces f or Removal Ef f i c i ency by Par t i c l e Si ze

ASHRAE 62. 1 ( 2010) Vent i l at i on f or Accept abl e I ndoor Ai r Qual i t y

ASHRAE 70 ( 2006; R 2011) Met hod of Test i ng f or Rat i ng t he Per f or mance of Ai r Out l et s and Inlets

ASHRAE 90. 1 - I P ( 2013) Ener gy St andar d f or Bui l di ngs Except Low- Ri se Resi dent i al Bui l di ngs

ASME I NTERNATI ONAL ( ASME)

ASME A13. 1 ( 2015) Scheme f or t he I dent i f i cat i on of Pi pi ng Syst ems

ASTM I NTERNATI ONAL ( ASTM)

ASTM A123/ A123M ( 2017) St andar d Speci f i cat i on f or Zi nc ( Hot - Di p Gal vani zed) Coat i ngs on I r on and St eel Pr oduct s

ASTM A167 ( 2011) St andar d Speci f i cat i on f or St ai nl ess and Heat - Resi st i ng Chr omi um- Ni ckel St eel Pl at e, Sheet , and Strip

ASTM A53/ A53M ( 2018) St andar d Speci f i cat i on f or Pi pe, St eel , Bl ack and Hot - Di pped, Zi nc- Coat ed, Wel ded and Seaml ess

ASTM A924/ A924M ( 2018) St andar d Speci f i cat i on f or Gener al Requi r ement s f or St eel Sheet , Met al l i c- Coat ed by t he Hot - Di p Pr ocess

ASTM B117 ( 2016) St andar d Pr act i ce f or Oper at i ng Sal t Spr ay ( Fog) Appar at us

ASTM B766 ( 1986; R 2015) St andar d Speci f i cat i on f or El ect r odeposi t ed Coat i ngs of Cadmi um

ASTM C1071 ( 2016) St andar d Speci f i cat i on f or Fi br ous Gl ass Duct Li ni ng I nsul at i on ( Ther mal and Sound Absor bi ng Mat er i al )

ASTM C553 ( 2013) St andar d Speci f i cat i on f or Mi ner al Fi ber Bl anket Ther mal I nsul at i on f or Commer ci al and I ndust r i al Appl i cat i ons

ASTM D1654 ( 2008; R 2016; E 2017) St andar d Test Met hod f or Eval uat i on of Pai nt ed or Coat ed Speci mens Subj ect ed t o Cor r osi ve Environments

SECTI ON 23 00 00 Page 2

ASTM D3359 ( 2017) St andar d Test Met hods f or Rat i ng Adhesi on by Tape Test

ASTM D520 ( 2000; R 2011) Zi nc Dust Pi gment

ASTM E2016 ( 2015) St andar d Speci f i cat i on f or I ndust r i al Woven Wi r e Cl ot h

CALI FORNI A DEPARTMENT OF PUBLI C HEALTH ( CDPH)

CDPH SECTI ON 01350 ( 2010; Ver si on 1. 1) St andar d Met hod f or t he Test i ng and Eval uat i on of Vol at i l e Or gani c Chemi cal Emi ssi ons f r om I ndoor Sour ces usi ng Envi r onment al Chamber s

NATI ONAL ELECTRI CAL MANUFACTURERS ASSOCI ATI ON ( NEMA)

NEMA MG 1 ( 2016; SUPP 2016) Mot or s and Gener at or s

NEMA MG 10 ( 2017) Ener gy Management Gui de f or Sel ect i on and Use of Fi xed Fr equency Medi um AC Squi r r el - Cage Pol yphase I nduct i on Mot or s

NEMA MG 11 ( 1977; R 2012) Ener gy Management Gui de f or Sel ect i on and Use of Si ngl e Phase Mot or s

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 70 ( 2017; ERTA 1- 2 2017; TI A 17- 1; TI A 17- 2;

TI A 17- 3; TI A 17- 4; TI A 17- 5; TI A 17- 6;

TI A 17- 7; TI A 17- 8; TI A 17- 9; TI A 17- 10;

TI A 17- 11; TI A 17- 12; TI A 17- 13; TI A

17- 14; TI A 17- 15; TI A 17- 16; TI A 17- 17 )

Nat i onal El ect r i cal Code

NFPA 701 ( 2019) St andar d Met hods of Fi r e Test s f or Fl ame Pr opagat i on of Text i l es and Fi l ms

NFPA 90A ( 2018) St andar d f or t he I nst al l at i on of Ai r Condi t i oni ng and Vent i l at i ng Syst ems

SHEET METAL AND AI R CONDI TI ONI NG CONTRACTORS' NATI ONAL ASSOCI ATI ON

(SMACNA)

SMACNA 1966 ( 2005) HVAC Duct Const r uct i on St andar ds Met al and Fl exi bl e, 3r d Edi t i on

SMACNA 1972 CD ( 2012) HVAC Ai r Duct Leakage Test Manual - 2nd Edi t i on

SOUTH COAST AI R QUALI TY MANAGEMENT DI STRI CT ( SCAQMD)

SCAQMD Rul e 1168 ( 2017) Adhesi ve and Seal ant Appl i cat i ons

U. S. DEPARTMENT OF DEFENSE ( DOD)

MIL-STD-101 ( 2014; Rev C) Col or Code f or Pi pel i nes and

SECTI ON 23 00 00 Page 3 f or Compr essed Gas Cyl i nder s

U. S. DEPARTMENT OF ENERGY ( DOE)

Ener gy St ar ( 1992; R 2006) Ener gy St ar Ener gy Ef f i c i ency Label i ng Syst em ( FEMP)

U. S. NATI ONAL ARCHI VES AND RECORDS ADMI NI STRATI ON ( NARA)

40 CFR 82 Pr ot ect i on of St r at ospher i c Ozone

UNDERWRI TERS LABORATORI ES ( UL)

UL 181 ( 2013; Repr i nt Apr 2017) UL St andar d f or Saf et y Fact or y- Made Ai r Duct s and Ai r Connectors

UL 1995 ( 2015) UL St andar d f or Saf et y Heat i ng and Cool i ng Equi pment

UL 586 ( 2009; Repr i nt Dec 2017) UL St andar d f or Saf et y Hi gh- Ef f i c i ency Par t i cul at e, Ai r Fi l t er Uni t s

UL 6 ( 2007; Repr i nt Nov 2014) El ect r i cal Ri gi d Met al Condui t - St eel

UL 705 ( 2017; Repr i nt Oct 2018) UL St andar d f or Saf et y Power Vent i l at or s

UL 900 ( 2015) St andar d f or Ai r Fi l t er Uni t s

UL 94 ( 2013; Repr i nt Sep 2017) UL St andar d f or Saf et y Test s f or Fl ammabi l i t y of Pl ast i c Mat er i al s f or Par t s i n Devi ces and Appliances

UL Bl d Mat Di r ( updat ed cont i nuousl y onl i ne) Bui l di ng Mat er i al s Di r ect or y

UL El ect r i cal Const r uct n ( 2012) El ect r i cal Const r uct i on Equi pment Directory

1. 2 SYSTEM DESCRI PTI ON

Fur ni sh duct wor k, pi pi ng of f set s, f i t t i ngs, and accessor i es as r equi r ed t o pr ovi de a compl et e i nst al l at i on. Coor di nat e t he wor k of t he di f f er ent t r ades t o avoi d i nt er f er ence bet ween pi pi ng, equi pment , st r uct ur al , and el ect r i cal wor k. Pr ovi de compl et e, i n pl ace, al l necessar y of f set s i n pi pi ng and duct wor k, and al l f i t t i ngs, and ot her component s, r equi r ed t o i nst al l t he wor k as i ndi cat ed and speci f i ed.

1. 2. 1 Mechani cal Equi pment I dent i f i cat i on

The number of char t s and di agr ams must be equal t o or gr eat er t han t he number of mechani cal equi pment r ooms. Wher e mor e t han one char t or di agr am per space i s r equi r ed, mount t hese i n edge pi vot ed, swi ngi ng l eaf , ext r uded al umi num f r ame hol der s whi ch open t o 170 degr ees.

SECTI ON 23 00 00 Page 4

1. 2. 1. 1 Charts

Pr ovi de char t l i s t i ng of equi pment by desi gnat i on number s and capaci t i es such as f l ow r at es, pr essur e and t emper at ur e di f f er ences, heat i ng and cool i ng capaci t i es, hor sepower , pi pe s i zes, and vol t age and cur r ent characteristics.

1. 2. 2 Ser vi ce Label i ng

Label equi pment , i ncl udi ng f ans, ai r handl er s, t er mi nal uni t s, et c. wi t h l abel s made of sel f - st i ck i ng, pl ast i c f i l m desi gned f or per manent i nst al l at i on. Pr ovi de l abel s i n accor dance wi t h t he t ypi cal exampl es bel ow:

SERVICE LABEL AND TAG DESI GNATI ON

Ai r handl i ng uni t Number AHU - _____

Exhaust Fan Number EF - _____

VAV Box Number VAV - _____

I dent i f y s i mi l ar ser vi ces wi t h di f f er ent t emper at ur es or pr essur es. Wher e pr essur es coul d exceed 125 pounds per squar e i nch, gage, i ncl ude t he maxi mum syst em pr essur e i n t he l abel . Label and ar r ow pi pi ng i n accor dance wi t h t he f ol l owi ng:

a. Each poi nt of ent r y and exi t of pi pe passi ng t hr ough wal l s.

b. Each change i n di r ect i on, i . e. , el bows, t ees.

c. I n congest ed or hi dden ar eas and at al l access panel s at each poi nt r equi r ed t o c l ar i f y ser vi ce or i ndi cat ed hazar d.

d. I n l ong st r ai ght r uns, l ocat e l abel s at di st ances wi t hi n eyesi ght of each ot her not t o exceed 75 f eet . Al l l abel s must be v i s i bl e and l egi bl e f r om t he pr i mar y ser vi ce and oper at i ng ar ea.

For Bar e or I nsul at ed Pi pes f or Out si de Di amet er s of Lettering

1/ 2 t hr u 1- 3/ 8 i nch 1/ 2 i nch

1- 1/ 2 t hr u 2- 3/ 8 i nch 3/ 4 i nch

2- 1/ 2 i nch and l ar ger 1- 1/ 4 i nch

1. 2. 3 Col or Codi ng

Col or codi ng of al l pi pi ng syst ems must be i n accor dance wi t h ASME A13. 1

MIL-STD-101 .

SECTI ON 23 00 00 Page 5

1. 3 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or i nf or mat i on onl y. When used, a desi gnat i on f ol l owi ng t he " G" desi gnat i on i dent i f i es t he of f i ce t hat wi l l r evi ew t he submi t t al f or t he Gover nment . Submi t t al s wi t h an " S" ar e f or i ncl usi on i n t he Sust ai nabi l i t y eNot ebook, i n conf or mance t o Sect i on 01 33 29 SUSTAI NABI LI TY REPORTI NG. Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00 SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Det ai l Dr awi ngs; G

SD- 03 Pr oduct Dat a

I nsul at ed Nonmet al l i c Fl exi bl e Duct Runout s

Duct Connect or s

Duct Access Door s; G

Manual Bal anci ng Damper s; G

Diffusers

Regi st er s and Gr i l l es

Ai r Vent s, Pent houses, and Goosenecks

Ai r Handl i ng Uni t s; G

Fan- Coi l Uni t s; G

Var i abl e Vol ume, Si ngl e Duct Ter mi nal Uni t s; G

Reheat Uni t s; G

Test Pr ocedur es

I ndoor Ai r Qual i t y f or Duct Seal ant s; S

SD- 06 Test Repor t s

Per f or mance Test s; G

Damper Accept ance Test ; G

SD- 07 Cer t i f i cat es

Ozone Depl et i ng Subst ances Techni c i an Cer t i f i cat i on

SD- 08 Manuf act ur er ' s I nst r uct i ons

Manuf act ur er ' s I nst al l at i on I nst r uct i ons

Oper at i on and Mai nt enance Tr ai ni ng

SD- 10 Oper at i on and Mai nt enance Dat a

SECTI ON 23 00 00 Page 6

Oper at i on and Mai nt enance Manual s; G

Manual Bal anci ng Damper s; G

I n- Li ne Cent r i f ugal Fans; GCei l i ng Exhaust Fans; GAi r Handl i ng Uni t s; G

Fan- Coi l Uni t s; G Var i abl e Vol ume, Si ngl e Duct Ter mi nal Uni t s; G

Reheat Uni t s; G

SD- 11 Cl oseout Submi t t al s

I ndoor Ai r Qual i t y Dur i ng Const r uct i on; S

1. 4 QUALI TY ASSURANCE

Except as ot her wi se speci f i ed, appr oval of mat er i al s and equi pment i s based on manuf act ur er ' s publ i shed dat a.

a. Wher e mat er i al s and equi pment ar e speci f i ed t o conf or m t o t he st andar ds of t he Under wr i t er s Labor at or i es, t he l abel of or l i s t i ng wi t h r eexami nat i on i n UL Bl d Mat Di r , and UL 6 i s accept abl e as suf f i c i ent evi dence t hat t he i t ems conf or m t o Under wr i t er s Labor at or i es r equi r ement s. I n l i eu of such l abel or l i s t i ng, submi t a wr i t t en cer t i f i cat e f r om any nat i onal l y r ecogni zed t est i ng agency, adequat el y equi pped and compet ent t o per f or m such ser vi ces, s t at i ng t hat t he i t ems have been t est ed and t hat t he uni t s conf or m t o t he speci f i ed r equi r ement s. Out l i ne met hods of t est i ng used by t he speci f i ed agencies.

b. Wher e mat er i al s or equi pment ar e speci f i ed t o be const r uct ed or t est ed, or bot h, i n accor dance wi t h t he st andar ds of t he ASTM I nt er nat i onal ( ASTM) , t he ASME I nt er nat i onal ( ASME) , or ot her st andar ds, a manuf act ur er ' s cer t i f i cat e of compl i ance of each i t em i s accept abl e as pr oof of compl i ance.

c. Conf or mance t o such agency r equi r ement s does not r el i eve t he i t em f r om compl i ance wi t h ot her r equi r ement s of t hese speci f i cat i ons.

1. 4. 1 Pr event i on of Cor r osi on

Pr ot ect met al l i c mat er i al s agai nst cor r osi on. Pr ovi de r ust - i nhi bi t i ng t r eat ment and st andar d f i ni sh f or t he equi pment encl osur es. Do not use al umi num i n cont act wi t h ear t h, and wher e connect ed t o di ssi mi l ar met al .

Pr ot ect al umi num by appr oved f i t t i ngs, bar r i er mat er i al , or t r eat ment .

Pr ovi de hot - di p gal vani zed f er r ous par t s such as anchor s, bol t s, br aces, boxes, bodi es, c l amps, f i t t i ngs, guar ds, nut s, pi ns, r ods, shi ms, t hi mbl es, washer s, and mi scel l aneous par t s not of cor r osi on- r esi st ant st eel or nonf er r ous mat er i al s i n accor dance wi t h ASTM A123/ A123M f or ext er i or l ocat i ons and cadmi um- pl at ed i n conf or mance wi t h ASTM B766 f or i nt er i or locations.

1. 4. 2 Asbest os Pr ohi bi t i on

Do not use asbest os and asbest os- cont ai ni ng pr oduct s.

SECTI ON 23 00 00 Page 7

1. 4. 3 Ozone Depl et i ng Subst ances Techni c i an Cer t i f i cat i on

Al l t echni c i ans wor ki ng on equi pment t hat cont ai n ozone depl et i ng r ef r i ger ant s must be cer t i f i ed as a Sect i on 608 Techni c i an t o meet r equi r ement s i n 40 CFR 82, Subpar t F. Pr ovi de copi es of t echni c i an cer t i f i cat i ons t o t he Cont r act i ng Of f i cer at l east 14 cal endar days pr i or t o wor k on any equi pment cont ai ni ng t hese r ef r i ger ant s.

1. 4. 4 Det ai l Dr awi ngs

Submi t det ai l dr awi ngs showi ng equi pment l ayout , i ncl udi ng assembl y and i nst al l at i on det ai l s and el ect r i cal connect i on di agr ams; duct wor k l ayout showi ng t he l ocat i on of al l suppor t s and hanger s, t ypi cal hanger det ai l s , gauge r ei nf or cement , r ei nf or cement spaci ng r i gi di t y c l assi f i cat i on, and st at i c pr essur e and seal c l assi f i cat i ons. I ncl ude any i nf or mat i on r equi r ed t o demonst r at e t hat t he syst em has been coor di nat ed and f unct i ons pr oper l y as a uni t on t he dr awi ngs and show equi pment r el at i onshi p t o ot her par t s of t he wor k, i ncl udi ng c l ear ances r equi r ed f or oper at i on and mai nt enance.

Submi t dr awi ngs showi ng bol t - set t i ng i nf or mat i on, and f oundat i on bol t s pr i or t o concr et e f oundat i on const r uct i on f or al l equi pment i ndi cat ed or r equi r ed t o have concr et e f oundat i ons. Submi t f unct i on desi gnat i on of t he equi pment and any ot her r equi r ement s speci f i ed t hr oughout t hi s Sect i on wi t h t he shop dr awi ngs.

1. 5 DELI VERY, STORAGE, AND HANDLI NG

Pr ot ect st or ed equi pment at t he j obsi t e f r om t he weat her , humi di t y and t emper at ur e var i at i ons, di r t and dust , or ot her cont ami nant s.

Addi t i onal l y, cap or pl ug al l pi pes unt i l i nst al l ed.

PART 2 PRODUCTS

2. 1 STANDARD PRODUCTS

Pr ovi de component s and equi pment t hat ar e " st andar d pr oduct s" of a manuf act ur er r egul ar l y engaged i n t he manuf act ur i ng of pr oduct s t hat ar e of a s i mi l ar mat er i al , desi gn and wor kmanshi p. " St andar d pr oduct s" i s def i ned as bei ng i n sat i sf act or y commer ci al or i ndust r i al use f or 2 year s bef or e bi d openi ng, i nc l udi ng appl i cat i ons of component s and equi pment under s i mi l ar c i r cumst ances and of s i mi l ar s i ze, sat i sf act or i l y compl et ed by a pr oduct t hat i s sol d on t he commer ci al mar ket t hr ough adver t i sement s, manuf act ur er s ' cat al ogs, or br ochur es. Pr oduct s havi ng l ess t han a 2- year f i el d ser vi ce r ecor d ar e accept abl e i f a cer t i f i ed r ecor d of sat i sf act or y f i el d oper at i on, f or not l ess t han 6000 hour s excl usi ve of t he manuf act ur er ' s f act or y t est s, can be shown. Pr ovi de equi pment i t ems t hat ar e suppor t ed by a ser vi ce or gani zat i on.

2. 2 I DENTI FI CATI ON PLATES

I n addi t i on t o st andar d manuf act ur er ' s i dent i f i cat i on pl at es, pr ovi de engr aved l ami nat ed phenol i c i dent i f i cat i on pl at es f or each pi ece of mechani cal equi pment . I dent i f i cat i on pl at es ar e t o desi gnat e t he f unct i on of t he equi pment . Submi t desi gnat i on wi t h t he shop dr awi ngs. Pr ovi de i dent i f i cat i on pl at es t hat ar e l ayer s, bl ack- whi t e- bl ack, engr aved t o show whi t e l et t er s on bl ack backgr ound. Let t er s must be upper case.

I dent i f i cat i on pl at es t hat ar e 1- 1/ 2- i nches hi gh and smal l er must be 1/ 16- i nch t hi ck, wi t h engr aved l et t er i ng 1/ 8- i nch hi gh; i dent i f i cat i on pl at es l ar ger t han 1- 1/ 2- i nches hi gh must be 1/ 8- i nch t hi ck, wi t h engr aved l et t er i ng of sui t abl e hei ght . I dent i f i cat i on pl at es 1- 1/ 2- i nches hi gh and

SECTI ON 23 00 00 Page 8 l ar ger must have bevel ed edges. I nst al l i dent i f i cat i on pl at es usi ng a compat i bl e adhesi ve.

2. 3 EQUI PMENT GUARDS AND ACCESS

Ful l y encl ose or guar d bel t s, pul l eys, chai ns, gear s, coupl i ngs, pr oj ect i ng set scr ews, keys, and ot her r ot at i ng par t s exposed t o per sonnel cont act accor di ng t o OSHA r equi r ement s. Pr oper l y guar d or cover wi t h i nsul at i on of a t ype speci f i ed, hi gh t emper at ur e equi pment and pi pi ng exposed t o cont act by per sonnel or wher e i t cr eat es a pot ent i al f i r e hazar d.

2. 4 ELECTRI CAL WORK

a. Pr ovi de mot or s, cont r ol l er s, i nt egr al di sconnect s, cont act or s, and cont r ol s wi t h t hei r r espect i ve pi eces of equi pment , except cont r ol l er s i ndi cat ed as par t of mot or cont r ol cent er s. Pr ovi de el ect r i cal equi pment , i ncl udi ng mot or s and wi r i ng, as speci f i ed i n Sect i on 26 20 00 I NTERI OR DI STRI BUTI ON SYSTEM. Pr ovi de manual or aut omat i c cont r ol and pr ot ect i ve or s i gnal devi ces r equi r ed f or t he oper at i on speci f i ed and cont r ol wi r i ng r equi r ed f or cont r ol s and devi ces speci f i ed, but not shown. For packaged equi pment , i ncl ude manuf act ur er pr ovi ded cont r ol l er s wi t h t he r equi r ed moni t or s and t i med r est ar t .

b. For s i ngl e- phase mot or s, pr ovi de hi gh- ef f i c i ency t ype, f r act i onal - hor sepower al t er nat i ng- cur r ent mot or s, i ncl udi ng mot or s t hat ar e par t of a syst em, i n accor dance wi t h NEMA MG 11. Pr ovi de pr emi um ef f i c i ency t ype i nt egr al s i ze mot or s i n accor dance wi t h NEMA MG 1.

c. For pol yphase mot or s, pr ovi de squi r r el - cage medi um i nduct i on mot or s, i ncl udi ng mot or s t hat ar e par t of a syst em , and t hat meet t he ef f i c i ency r at i ngs f or pr emi um ef f i c i ency mot or s i n accor dance wi t h NEMA MG 1. Sel ect pr emi um ef f i c i ency pol yphase mot or s i n accor dance with NEMA MG 10.

d. Pr ovi de mot or s i n accor dance wi t h NEMA MG 1 and of suf f i c i ent s i ze t o dr i ve t he l oad at t he speci f i ed capaci t y wi t hout exceedi ng t he namepl at e r at i ng of t he mot or . Pr ovi de mot or s r at ed f or cont i nuous dut y wi t h t he encl osur e speci f i ed. Pr ovi de mot or dut y t hat al l ows f or maxi mum f r equency st ar t - st op oper at i on and mi ni mum encount er ed i nt er val bet ween st ar t and st op. Pr ovi de mot or t or que capabl e of accel er at i ng t he connect ed l oad wi t hi n 20 seconds wi t h 80 per cent of t he r at ed vol t age mai nt ai ned at mot or t er mi nal s dur i ng one st ar t i ng per i od.

Pr ovi de mot or st ar t er s compl et e wi t h t her mal over l oad pr ot ect i on and ot her necessar y appur t enances. Fi t mot or bear i ngs wi t h gr ease suppl y f i t t i ngs and gr ease r el i ef t o out s i de of t he encl osur e.

e. Pr ovi de var i abl e f r equency dr i ves f or mot or s as speci f i ed i n Sect i on

26 29 23 VARI ABLE FREQUENCY DRI VE SYSTEMS UNDER 600 VOLTS.

2. 5 ANCHOR BOLTS

Pr ovi de anchor bol t s f or equi pment pl aced on concr et e equi pment pads or on concr et e s l abs. Bol t s t o be of t he s i ze and number r ecommended by t he equi pment manuf act ur er and l ocat ed by means of sui t abl e t empl at es.

I nst al l at i on of anchor bol t s must not degr ade t he sur r oundi ng concr et e.

2. 6 PAINTING

Pai nt equi pment uni t s i n accor dance wi t h appr oved equi pment manuf act ur er ' s

SECTI ON 23 00 00 Page 9 st andar ds unl ess speci f i ed ot her wi se. Fi el d r et ouch onl y i f appr oved.

Ot her wi se, r et ur n equi pment t o t he f act or y f or r ef i ni shi ng.

2. 7 I NDOOR AI R QUALI TY

Pr ovi de equi pment and component s t hat compl y wi t h t he r equi r ement s of ASHRAE 62. 1 unl ess mor e st r i ngent r equi r ement s ar e speci f i ed her ei n.

2. 8 DUCT SYSTEMS

2. 8. 1 Met al Duct wor k

Pr ovi de met al duct wor k const r uct i on, i ncl udi ng al l f i t t i ngs and component s, t hat compl i es wi t h SMACNA 1966, as suppl ement ed and modi f i ed by t hi s speci f i cat i on .

a. Pr ovi de r adi us t ype el bows wi t h a cent er l i ne r adi us of 1. 5 t i mes t he wi dt h or di amet er of t he duct wher e space per mi t s. Ot her wi se, el bows havi ng a mi ni mum r adi us equal t o t he wi dt h or di amet er of t he duct or squar e el bows wi t h f act or y f abr i cat ed t ur ni ng vanes ar e al l owed.

b. Pr ovi de duct wor k t hat meet s t he r equi r ement s of Seal Cl ass A. Pr ovi de duct wor k i n VAV syst ems upst r eam of t he VAV boxes t hat meet s t he r equi r ement s of Seal Cl ass A.

c. Pr ovi de seal ant s t hat conf or m t o f i r e hazar d c l assi f i cat i on speci f i ed i n Sect i on 23 07 00 THERMAL I NSULATI ON FOR MECHANI CAL SYSTEMS and ar e sui t abl e f or t he r ange of ai r di s t r i but i on and ambi ent t emper at ur es t o whi ch i t i s exposed. Do not use pr essur e sensi t i ve t ape as a seal ant .

Pr ovi de duct seal ant pr oduct s t hat meet ei t her emi ssi ons r equi r ement s of CDPH SECTI ON 01350 ( l i mi t r equi r ement s f or ei t her of f i ce or c l assr oom spaces r egar dl ess of space t ype) or VOC cont ent r equi r ement s of SCAQMD Rul e 1168 ( HVAC duct seal ant s ar e c l assi f i ed as " Ot her " wi t hi n t he SCAQMD Rul e 1168 seal ant s t abl e) . Pr ovi de val i dat i on of i ndoor ai r qual i t y f or duct seal ant s.

e. Make spi r al l ock seam duct , and f l at oval wi t h duct seal ant and l ock wi t h not l ess t han 3 equal l y spaced dr i ve scr ews or ot her appr oved met hods i ndi cat ed i n SMACNA 1966. Appl y t he seal ant t o t he exposed mal e par t of t he f i t t i ng col l ar so t hat t he seal er i s on t he i nsi de of t he j oi nt and f ul l y pr ot ect ed by t he met al of t he duct f i t t i ng. Appl y one br ush coat of t he seal ant over t he out s i de of t he j oi nt t o at l east 2 i nch band wi dt h cover i ng al l scr ew heads and j oi nt gap. Dent s i n t he mal e por t i on of t he s l i p f i t t i ng col l ar ar e not accept abl e. Fabr i cat e out door ai r i nt ake duct s and pl enums wi t h wat er t i ght sol der ed or br azed j oi nt s and seams.

2. 8. 1. 1 I nsul at ed Nonmet al l i c Fl exi bl e Duct Runout s

Use f l exi bl e duct r unout s onl y wher e i ndi cat ed. Runout l engt h i s i ndi cat ed on t he dr awi ngs, and i s not t o exceed 5 f eet . Pr ovi de r unout s t hat ar e pr ei nsul at ed, f act or y f abr i cat ed, and t hat compl y wi t h NFPA 90A and UL 181.

Pr ovi de ei t her f i el d or f act or y appl i ed vapor bar r i er . Pr ovi de not l ess t han 20 ounce gl ass f abr i c duct connect or s coat ed on bot h s i des wi t h neopr ene. Wher e coi l i nduct i on or hi gh vel oci t y uni t s ar e suppl i ed wi t h ver t i cal ai r i nl et s, use a st r eaml i ned, vaned and mi t er ed el bow t r ansi t i on pi ece f or connect i on t o t he f l exi bl e duct or hose. Pr ovi de a di e- st amped el bow and not a f l exi bl e connect or as t he l ast el bow t o t hese uni t s ot her t han t he ver t i cal ai r i nl et t ype. I nsul at ed f l exi bl e connect or s ar e

SECTI ON 23 00 00 Page 10 al l owed as r unout s. Pr ovi de i nsul at ed mat er i al and vapor bar r i er t hat conf or m t o t he r equi r ement s of Sect i on 23 07 00 THERMAL I NSULATI ON FOR MECHANI CAL SYSTEMS. Do not expose t he i nsul at i on mat er i al sur f ace t o t he ai r st r eam.

2. 8. 1. 2 Gener al Ser vi ce Duct Connect or s

Pr ovi de a f l exi bl e duct connect or appr oxi mat el y 6 i nches i n wi dt h wher e sheet met al connect i ons ar e made t o f ans or wher e duct s of di ssi mi l ar met al s ar e connect ed. For r ound/ oval duct s, secur e t he f l exi bl e mat er i al by st ai nl ess st eel or z i nc- coat ed, i r on c l i nch- t ype dr aw bands. For r ect angul ar duct s, i nst al l t he f l exi bl e mat er i al l ocked t o met al col l ar s usi ng nor mal duct const r uct i on met hods. Pr ovi de a composi t e connect or syst em t hat compl i es wi t h NFPA 701 and i s c l assi f i ed as " f l ame- r et ar dent f abr i cs" i n UL Bl d Mat Di r .

2. 8. 2 Duct Access Door s

Pr ovi de hi nged access door s conf or mi ng t o SMACNA 1966 i n duct wor k and pl enums wher e i ndi cat ed and at al l ai r f l ow measur i ng pr i mar i es, aut omat i c damper s, f i r e damper s, coi l s , t her most at s, and ot her appar at us r equi r i ng ser vi ce and i nspect i on i n t he duct syst em. Pr ovi de access door s upst r eam and downst r eam of ai r f l ow measur i ng pr i mar i es and heat i ng and cool i ng coi l s. Pr ovi de door s t hat ar e a mi ni mum 15 by 18 i nches, unl ess ot her wi se shown. Wher e duct s i ze does not accommodat e t hi s s i ze door , make t he door s as l ar ge as pr act i cabl e. Equi p door s 24 by 24 i nches or l ar ger wi t h f ast ener s oper abl e f r om i nsi de and out s i de t he duct . Use i nsul at ed t ype door s i n i nsul at ed duct s.

2. 8. 3 Manual Bal anci ng Damper s

Fur ni sh manual bal anci ng…