W9124M23Q0038 Amendment 0001 conformed version.pdf

PDF 1 MB Posted

Attached to
Scales Inspection and Repair Services, Fort Stewart, GA
Solicitation number
W9124M-23-Q-0038
Issued by

About this file

This is a solicitation for scale inspection and repair services at Fort Stewart, Georgia. The Army Materiel Command Mission and Installation Contracting Command is seeking quarterly preventative maintenance, demand maintenance, certifications and recertifications for scales. Offerors must propose unit prices for line items including 56 quarterly inspections, 25 hours of priority 1 demand maintenance, 50 hours of priority 2 demand maintenance, and 42 certifications. Quotes are due by July 31, 2023. The period of performance is one base year with four option years running from November 2023 to October 2028. The place of performance will be at various locations on Fort Stewart.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SEE ADDENDUM

(No Collect Calls)

W9124M23Q0038 22-Jun-2023

b. TELEPHONE NUMBER

9127675467

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 31 Jul 2023

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W9124M9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

TESHA H. DOYLE

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0011879631

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

MICC - FORT STEWART

976 WILLIAM H. WILSON AVE SUITE 100

FORT STEWART GA 31314

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W33DL4 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

W0VA USA GAR EN R U MAINT PB00

W0VA USA GAR EN R U MAINT

328 ITALY STREET BLDG 1152

FORT STEWART GA 31314-5185

TEL: 912-435-0285 FAX:

FAX:

TEL: (912)767-8420 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$34,000,000

NAICS:

811210

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF52

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W9124M23Q0038

Section SF 30 - BLOCK 14 CONTINUATION PAGE

QUESTION AND ANSWER

Question

What is the difference between CLIN 0001 Quarterly Preventative Maintenance x QTY 56 and CLIN 0005 Certifications and Recertifications x QTY 42?

Answer

The preventative maintenance is there so that they will regularly come out and inspect the systems for functionality and address any issues found before they become a problem/failure.

The certification/recertification is an annual requirement to ensure the system is accurate.

This is typically an annual requirement but sometimes must happen when a catastrophic failure of a scale takes place prior to the annual certification.

Question We wanted to confirm that we should leave CLIN 0004 Reimbursable Parts blank?

Answer Yes

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 56 Each Quarterly Preventative Maint. Per Scale

FFP

Perform quarterly preventative maintenance and calibration in accordance with the PWS and all other terms and conditions of the contract.

The quantity is calculated by multiplying the number of scales times the number of quarters (4). THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES RECEIVED AND ACCEPTED.

FOB: Destination

PURCHASE REQUEST NUMBER: 0011879631

PSC CD: J052

NET AMT

0002 25 Hours Demand Maintenance Order Priority 1

FFP

Perform emergency repairs of scale equipment in accordance with the PWS and all other terms and conditions of the contract. Not to exceed 2 hours without prior approval.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED.THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

0003 50 Hours Demand Maintenance Order Priority 2

FFP

Perform non-emergency repairs of platform scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

0004 20,000 Each Reimbursable parts

FFP

Repair parts that are required beyond that of preventative maintenance will be reimbursed to the contractor in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

AMOUNTS APPROVED, RECEIVED, AND ACCEPTED. THIS LINE ITEM IS

NOT FOR QUOTE PURPOSES AND WILL BE FILLED IN BY THE

GOVERNMENT

FOB: Destination

0005 42 Each Certifications and Recertifications

FFP

Perform certification and recertification of scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

1001 56 Each OPTION Quarterly Preventative Maint. Per Scale

FFP

Perform quarterly preventative maintenance and calibration in accordance with the PWS and all other terms and conditions of the contract.

The quantity is calculated by multiplying the number of scales times the number ofquarters (4). THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES RECEIVED AND ACCEPTED.

FOB: Destination

1002 25 Hours OPTION Demand Maintenance Order Priority 1

FFP

Perform emergency repairs of scale equipment in accordance with the PWS and all other terms and conditions of the contract. Not to exceed 2 hours without prior approval.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED.THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

1003 50 Hours OPTION Demand Maintenance Order Priority 2

FFP

Perform non-emergency repairs of platform scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

1004 20,000 Each OPTION Reimbursable parts

FFP

Repair parts that are required beyond that of preventative maintenance will be reimbursed to the contractor in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

AMOUNTS APPROVED, RECEIVED, AND ACCEPTED. THIS LINE ITEM IS

NOT FOR QUOTE PURPOSES AND WILL BE FILLED IN BY THE

GOVERNMENT

FOB: Destination

1005 42 Each OPTION Certifications and Recertifications

FFP

Perform certification and recertification of scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

2001 56 Each OPTION Quarterly Preventative Maint. Per Scale

FFP

Perform quarterly preventative maintenance and calibration in accordance with the PWS and all other terms and conditions of the contract.

The quantity is calculated by multiplying the number of scales times the number of quarters (4). THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES RECEIVED AND ACCEPTED.

FOB: Destination

2002 25 Hours OPTION Demand Maintenance Order Priority 1

FFP

Perform emergency repairs of scale equipment in accordance with the PWS and all other terms and conditions of the contract. Not to exceed 2 hours without prior approval.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED.THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

2003 50 Hours OPTION Demand Maintenance Order Priority 2

FFP

Perform non-emergency repairs of platform scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

2004 20,000 Each OPTION Reimbursable parts

FFP

Repair parts that are required beyond that of preventative maintenance will be reimbursed to the contractor in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

AMOUNTS APPROVED, RECEIVED, AND ACCEPTED. THIS LINE ITEM IS

NOT FOR QUOTE PURPOSES AND WILL BE FILLED IN BY THE

GOVERNMENT

FOB: Destination

2005 42 Each OPTION Certifications and Recertifications

FFP

Perform certification and recertification of scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

3001 56 Each OPTION Quarterly Preventative Maint. Per Scale

FFP

Perform quarterly preventative maintenance and calibration in accordance withthe PWS and all other terms and conditions of the contract.

The quantity is calculated by multiplying the number of scales times the number ofquarters (4). THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES RECEIVED AND ACCEPTED.

FOB: Destination

3002 25 Hours OPTION Demand Maintenance Order Priority 1

FFP

Perform emergency repairs of scale equipment in accordance with the PWS and all other terms and conditions of the contract. Not to exceed 2 hours without prior approval.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED.THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

3003 50 Hours OPTION Demand Maintenance Order Priority 2

FFP

Perform non-emergency repairs of platform scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

3004 20,000 Each OPTION Reimbursable parts

FFP

Repair parts that are required beyond that of preventative maintenance will be reimbursed to the contractor in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

AMOUNTS APPROVED, RECEIVED, AND ACCEPTED. THIS LINE ITEM IS

NOT FOR QUOTE PURPOSES AND WILL BE FILLED IN BY THE

GOVERNMENT

FOB: Destination

3005 42 Each OPTION Certifications and Recertifications

FFP

Perform certification and recertification of scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

4001 56 Each OPTION Quarterly Preventative Maint. Per Scale

FFP

Perform quarterly preventative maintenance and calibration in accordance with the PWS and all other terms and conditions of the contract.

The quantity is calculated by multiplying the number of scales times the number of quarters (4). THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES RECEIVED AND ACCEPTED.

FOB: Destination

4002 25 Hours OPTION Demand Maintenance Order Priority 1

FFP

Perform emergency repairs of scale equipment in accordance with the PWS and all other terms and conditions of the contract. Not to exceed 2 hours without prior approval.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED.THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

4003 50 Hours OPTION Demand Maintenance Order Priority 2

FFP

Perform non-emergency repairs of platform scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

4004 20,000 Each OPTION Reimbursable parts

FFP

Repair parts that are required beyond that of preventative maintenance will be reimbursed to the contractor in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

AMOUNTS APPROVED, RECEIVED, AND ACCEPTED. THIS LINE ITEM IS

NOT FOR QUOTE PURPOSES AND WILL BE FILLED IN BY THE

GOVERNMENT.

FOB: Destination

4005 42 Each OPTION Certifications and Recertifications

FFP

Perform certification and recertification of scale equipment in accordance with the PWS and all other terms and conditions of the contract.

THE QUANTITY OF THIS LINE ITEM IS ESTIMATED AND NOT

GUARANTEED. THE GOVERNMENT WILL ONLY PAY FOR THOSE

QUANTITIES APPROVED, RECEIVED, AND ACCEPTED.

FOB: Destination

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 1003 Destination Government Destination Government 1004 Destination Government Destination Government 1005 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 2003 Destination Government Destination Government 2004 Destination Government Destination Government 2005 Destination Government Destination Government 3001 Destination Government Destination Government 3002 Destination Government Destination Government 3003 Destination Government Destination Government 3004 Destination Government Destination Government 3005 Destination Government Destination Government 4001 Destination Government Destination Government 4002 Destination Government Destination Government 4003 Destination Government Destination Government

4004 Destination Government Destination Government 4005 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 01-NOV-2023 TO

31-OCT-2024

N/A W0VA USA GAR EN R U MAINT PB00

W0VA USA GAR EN R U MAINT

328 ITALY STREET BLDG 1152

FORT STEWART GA 31314-5185

912-435-0285 FOB: Destination

W33DL4

0002 POP 01-NOV-2023 TO

31-OCT-2024

N/A (SAME AS PREVIOUS LOCATION)

0003 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

0004 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

0005 POP 01-NOV-2023 TO

N/A (SAME AS PREVIOUS LOCATION)

1001 POP 01-NOV-2024 TO

31-OCT-2025

N/A (SAME AS PREVIOUS LOCATION)

1002 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

1003 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

1004 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

1005 POP 01-NOV-2024 TO

N/A (SAME AS PREVIOUS LOCATION)

2001 POP 01-NOV-2025 TO

31-OCT-2026

N/A (SAME AS PREVIOUS LOCATION)

2002 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

2003 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

2004 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

2005 POP 01-NOV-2025 TO

N/A (SAME AS PREVIOUS LOCATION)

3001 POP 01-NOV-2026 TO

31-OCT-2027

N/A (SAME AS PREVIOUS LOCATION)

3002 POP 01-NOV-2026 TO

N/A (SAME AS PREVIOUS LOCATION)

3003 POP 01-NOV-2026 TO

N/A (SAME AS PREVIOUS LOCATION)

3004 POP 01-NOV-2026 TO

N/A (SAME AS PREVIOUS LOCATION)

3005 POP 01-NOV-2026 TO

N/A (SAME AS PREVIOUS LOCATION)

4001 POP 01-NOV-2027 TO

31-OCT-2028

N/A (SAME AS PREVIOUS LOCATION)

4002 POP 01-NOV-2027 TO

N/A (SAME AS PREVIOUS LOCATION)

4003 POP 01-NOV-2027 TO

N/A (SAME AS PREVIOUS LOCATION)

4004 POP 01-NOV-2027 TO

N/A (SAME AS PREVIOUS LOCATION)

4005 POP 01-NOV-2027 TO

N/A (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions JUN 2020 52.203-3 Gratuities APR 1984 52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(JUN 2020) -- Alternate I

NOV 2021

52.203-7 Anti-Kickback Procedures JUN 2020 52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.203-17 Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.204-19 Incorporation by Reference of Representations and Certifications.

DEC 2014

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities

NOV 2021

52.204-27 Prohibition on a ByteDance Covered Application JUN 2023 52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

NOV 2015

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

DEC 2022

52.217-5 Evaluation Of Options JUL 1990 52.217-6 Option For Increased Quantity MAR 1989 52.217-7 Option For Increased Quantity-Separately Priced Line Item MAR 1989 52.223-3 Hazardous Material Identification And Material Safety Data FEB 2021 52.223-5 Pollution Prevention and Right-to-Know Information MAY 2011 52.223-6 Drug-Free Workplace MAY 2001 52.223-15 Energy Efficiency in Energy-Consuming Products MAY 2020 52.228-5 Insurance - Work On A Government Installation JAN 1997 52.229-3 Federal, State And Local Taxes FEB 2013 52.232-18 Availability Of Funds APR 1984 52.232-22 Limitation Of Funds APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

MAR 2023

52.233-1 Disputes MAY 2014 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.237-2 Protection Of Government Buildings, Equipment, And

Vegetation

APR 1984

52.242-13 Bankruptcy JUL 1995 252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7000 Disclosure Of Information OCT 2016 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.223-7004 Drug Free Work Force SEP 1988 252.223-7006 Prohibition On Storage, Treatment, and Disposal of Toxic or

Hazardous Materials

SEP 2014

252.225-7012 Preference For Certain Domestic Commodities APR 2022 252.225-7050 Disclosure of Ownership or Control by the Government of a

Country that is a State Sponsor of Terrorism

DEC 2022

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7002 Requests for Equitable Adjustment DEC 2022 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

252.246-7003 Notification of Potential Safety Issues JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

(MAR 2023)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition--

(1) Is set aside for small business and has a value above the simplified acquisition threshold;

(2) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(3) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers:

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers.

Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation.

(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC 20407, Telephone (202) 619-8925, Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision.

Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by--

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone

(215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Unique entity identifier. (Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.

(k) Reserved.

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision)

ADDENDA TO 52.212-1

Reference (c) above. Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers.

In accordance with FAR 52.232-18, Availability of Funds, FY24 funds are currently not available for this solicitation and the resulting contract.

INSTRUCTIONS TO OFFERORS

1. Offerors are responsible for submitting quotes by e-mail to addresses listed below by 24 July 2023, 1:00 p.m.

EST. The quote must be complete, and respond directly to the requirement of this solicitation. Contracting Officer (KO), Sheung Li and Contract Specialist (KS) Tesha Doyle, e-mail to both parties at Sheung.C.Li.Civ@army.mil and Tesha.H.Doyle.Civ@army.mil.

It is the offeror’s responsibility to ensure that quotes are received by the government as instructed.

2. Price: Prospective offerors are required to propose unit prices in US Dollars (rounded to the nearest cent and no more than two decimal places) inclusive of Contract Line Items (CLINs) listed in Schedule B. The offeror shall then enter the total amount for the base year and each option year.

3. Technical:

a. Quote must provide technician’s certification or licenses in accordance with Georgia State law to perform maintenance, repair, calibration and certification of the equipment in accordance with the performance work statement.

b. Provide list of testing and calibration tools/equipment, and provide proof of current calibration certificates for said tools/equipment.

c. Vendor must be licensed and certified in accordance with State of Georgia and applicable federal regulatory bodies to perform scale calibration and maintenance services.

4. Quotation submission: Offerors complete quote shall consist of:

a. Complete DD1449, signed and acknowledged amendment, if applicable.

b. Proposed prices (in US Dollars) for each CLIN.

c. Technical

d. Completed 52.212-3, Offeror Representations and Certifications – Commercial Item

5. Site Visit will be held on

Date: 27 June 2023, Time: 10:00 AM EST Location: 1593 Veterans Parkway

BLDG 1178

Fort Stewart, GA 31314.

Accessing Fort Stewart Procedures: Visitors must go to the Visitor Control Center to obtain a base pass. They must have valid Government issued ID, current vehicle registration and insurance if operating a vehicle, and be able to pass a background check.

Each contractor is limited to 2 participants for the site visit.

6. Question Submission:

Address any questions or concerns to the Contracting Officer (KO) and the Contract Specialist (KS) listed above.

The deadline for all questions, concerns, and/or requests for clarification is no later than 05 July 2023, 2:00PM EST. The Government will not respond to submissions past the deadline.

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price Technical Capability

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (DEC 2022)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision --

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business concern"--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern"--

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1002", means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

"Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

"Veteran-owned small business concern" means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b) (1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ ]

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 125.18(b)(1) and (2).

[The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .] Each service-disabled veteran-owned small business concern participating in the joint venture shall provide representation of its service-disabled veteran-owned small business concern status.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

(6) WOSB joint venture eligible under the WOSB Program. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .