A.03.09 Drawings.pdf
PDF 403 KB Posted
- Attached to
- Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1
- Solicitation number
- W9123727QA011
About this file
This document is a technical specification and fabrication drawing package for steel plate components. The package specifies fabrication requirements for multiple steel plate assemblies with varying material specifications, quantities, and finishing requirements.
The deliverables include: (1) Adapter Section Third Skin Plates (Qty 3) fabricated from ASTM 709 Grade 50 material with 1/8" tolerance, featuring double 45-degree bevels on yellow-highlighted ends; (2) Bottom Section Skin Plates (Qty 1) with similar material and bevel specifications; (3) Bottom Section Skin Plates - Side (Qty 2) with double 45-degree bevels on highlighted ends; (4) Flange Type A Plates (Qty 12) from ASTM 709 Grade 50 with 1/8" tolerance and 3 required per flange, featuring specific profile cuts and optional edge treatments; (5) Additional Flange Type A Profile Cuts (Qty 12) from the same material specification; (6) Intermediate Section Third Skin Plates (Qty 9) from ASTM 709 with 1/8" tolerance in overall length and radius, with double 45-degree bevels on each side of highlighted ends; (7) Various bearing and seal back bar components (Qty 30 and Qty 12) fabricated from ASTM A36 material; and (8) Top Section Top Flange Gusset (Qty 3) from ASTM 709 Grade 50 with 1/8" tolerance. All components include detailed dimensional specifications, radius requirements, and finishing requirements as indicated in the technical drawings provided.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A.03.09 Drawings.pdf | ||
| B.01.3 Pre-Soliciation Synopsis.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Ends that are highlighted in yellow are to be double bevel at a 45 deg. Qty of plates are 3
Ends that are highlighted in yellow are to be a double bevel at a 45 deg bevel QTY 1
Ends that are highlighted in yellow are to have a double bevel and each bevel is to be at a 45 deg. QTY 2
Material ASTM 709 Gr 50, 1/8 tolerance, qty 12, Flange Type A Plate
Material ASTM 709 Gr 50, 1/8 tolerance, qty 12, Cut the profile only
Material ASTM 709, QTY 9, Tolerance 1/8” in AOL along with RAD, highlighted in yellow shall have a double bevel at a 45 deg ea side.
Qty 30 ea ASTM A36
Qty 12 ea ASTM A 36
Material ASTM 709 Gr 50, 1/8 tolerance, qty 3,
File details come from the government source that posted it. Updated .