A19_Bid_Schedule.pdf

DALLAS GRAPHIC PACKAGE‐ BID SCHEDULE ‐ CONTRACTOR'S RESPONSE

***Dimensions provided are estimates. Contractor responsible for field measuring site.

*** For bidding purposes, assume existing wall surfaces are vinyl wall covering throughout facility.

*** Except where indicated as glass etched appearance, all vinyl shall be a translucent vinyl film to allow light to pass through and images to appear backlit.

***All acrylic shall be non- glare and edges shall be polished smooth.

TAG ID

DESCRIPTION

TECHNICAL SPECS QUANTITY

UNIT

COST

EXTENDED

COST

21 BOOT PRINTS IN MALE ORTHO ROOM Provide and install twenty one (21) vinyl image/appliqués of a set of boot prints. Each vinyl image/appliqué shall simulate a set of boot prints. 8" high image shall coordinated in color with the interior finishes. Material shall be applicable for foot traffic and be slip resistant.

21 BOOT PRINTS IN FEMALE ORTHO Provide and install twenty one (21) vinyl image/appliqués. Each vinyl image/appliqué shall simulate a set of boot prints. 8" high image shall coordinated in color with the interior finishes. Material shall be applicable for foot traffic and be slip resistant. 21

DALLAS LOGO FOR WALL IN COMMAND CONF ROOM FOR VTC Provide a three dimensional plastic/fiberglass MEPCOM logo installed on the existing wall. Provide capital lettering to read “DALLAS". Lettering shall be 1/4" thick, 8” high three dimensional letters with a brushed satin aluminum or flat black finish.

Install on existing wall/soffit.

MEPCOM LOGO IN ETCHED GLASS STICKER TO BE INSTALLED

UNDERNEATH GLASS ON CONFERENCE TABLE IN COMMAND

CONFERENCE ROOM ‐ EXISTING IS 20" DIAMETER.

provide a vinyl or appliqués with an etched glass appearances of a 20" diameter MEPCOM logo. Vinyl or appliqués shall be UV retardant. Vinyl or appliqué shall be installed on the underside of the existing glass top of the conference table.

NAVY LOGO AT ENTRANCE ‐ 3 GLASS 36" EACH provide three (3) custom window stickers which are installed on the inside of the window and viewed from the outside. Image shall be of military branch logos and an action photo on each. Window stickers shall be designed to be installed on existing window side lights which may be curved glass walls. Height is approximately 8' and glass windows are approximately 36" wide each.

CG LOGO AT ENTRANCE ‐ 2 GLASS 24" EACH provide two (2) custom window stickers which are installed on the inside of the window and viewed from the outside. Image shall be of military branch logos and an action photo on each. Window stickers shall be designed to be installed on existing window side lights which may be curved glass walls. Height is approximately 8' and glass windows are approximately 24" wide each.

MEDICAL LOGO ON GLASS DOOR OR SOFFIT ABOVE SINGLE

DOOR

Provide and install a 20" diameter vinyl appliqué, with an etched glass appearance or with full color applied directly to the face of the door or soffit above. Logo shall be the medical shield with 4" high lettering to read "MEDICAL" 1

MEDICAL LOGO ON GLASS DOOR OR SOFFIT ABOVE DOUBLE

DOOR

Provide and install a 20" diameter vinyl appliqué, with an etched glass appearance or with full color applied directly to the face of the door or soffit above. Logo shall be the medical shield with 4" high lettering to read "MEDICAL" 1

9TH BATTALION LOGO STICKER OF ETCHED GLASS AT TRANSOM

INTO COMMAND SUITE

Provide and install a 20" diameter vinyl appliqué, with an etched glass appearance applied directly to the face of the transom into the Command Suite. Logo shall be of the 9th Battalion logo. 1

DALLAS LOGO STICKER ETCHED GLASS ON GLASS DOOR INTO

COMMAND SUITE

Provide and install a 20" diameter vinyl appliqué, with an etched glass appearance applied directly to the face of the glass door into the Command Suite. Logo shall be of the Dallas MEPS logo. 1

10 FRAMED PRINTS 24X36 IN TEST ROOM Provide and install ten (10) acrylic panels measuring 24” wide by 36” high by 1/8” thick. Panel shall have a digital graphic image fused onto the panel surface and shall be mounted to the wall using four (4) satin aluminum standoff hardware brackets. 10

PROCESSING LOGO/ MOUNTED TO SOFFIT ABOVE DOOR/ON

GLASS DOOR

Provide and install a 20" diameter vinyl appliqué, with an etched glass appearance or with full color applied directly to the face of the door or soffit above. Logo shall be the processing shield with 4" high lettering to read "PROCESSING". 1

PROCESSING LOGO/SIGN TO BE MOUNTED AND HUNG FROM

CEILING AT ENTRANCE TO PROCESSING

Provide and install a total of one (1) overhead identity signs; ceiling mounted hanging from SAPC ceiling in corridors; aluminum and wood laminate finishes to match building finishes; 8"‐9" raised metal lettering in capitals to read "PROCESSING", double sided; securely attached to ceiling with typical installation method; approximate overall dimensions of 10" high x 36" wide x 1/2" thick

MEDICAL LOGO/SIGN TO BE MOUNTED AND HUNG FROM

CEILING AT ENTRANCE TO PROCESSING

Provide and install a total of one (1) overhead identity signs; ceiling mounted hanging from SAPC ceiling in corridors; aluminum and wood laminate finishes to match building finishes; 8"‐9" raised metal lettering in capitals to read "MEDICAL", double sided;

securely attached to ceiling with typical installation method; approximate overall dimensions of 10" high x 36" wide x 1/2" thick 1

TESTING LOGO/SIGN TO BE MOUNTED AND HUNG FROM

CEILING AT ENTRANCE TO PROCESSING

Provide and install a total of one (1) overhead identity signs; ceiling mounted hanging from SAPC ceiling in corridors; aluminum and wood laminate finishes to match building finishes; 8"‐9" raised metal lettering in capitals to read "TESTING", double sided;

securely attached to ceiling with typical installation method; approximate overall dimensions of 10" high x 36" wide x 1/2" thick 1

MARINE LOGO AT ENTRANCE ‐ 3 GLASS 36" EACH provide three (3) custom window stickers which are installed on the inside of the window and viewed from the outside. Image shall be of military branch logos and an action photo on each. Window stickers shall be designed to be installed on existing window side lights which may be curved glass walls. Height is approximately 8' and glass windows are approximately 36" wide each.

ARMY LOGO AT ENTRANCE ‐ ON CURVED GLASS AT ENTRANCE provide one (1) custom window stickers which are installed on the inside of the window and viewed from the outside. Image shall be of military branch logos and an action photo on each. Window stickers shall be designed to be installed on existing window side lights which may be curved glass walls. Height is approximately 8' and glass windows are approximately 36" wide each.

NATIONAL GUARD LOGO AT ENTRANCE ‐ ON CURVED GLASS AT

ENTRANCE

provide one (1) custom window stickers which are installed on the inside of the window and viewed from the outside. Image shall be of military branch logos and an action photo on each. Window stickers shall be designed to be installed on existing window side lights which may be curved glass walls. Height is approximately 8' and glass windows are approximately 36" wide each.

EXTRA LARGE MEPCOM/DALLAS LOGO AT ELEVATOR ENTRANCE

ON GLASS WINDOWS ‐ 3 GLASS 36" EACH ‐ ETCHED GLASS

FINISH

Provide and install a quantity of two (2) 30" diameter vinyl appliqué, glass etched appearance applied directly to the windows.

MEPCOM Logo and Dallas MEPS Logo 2

20A CHAIN OF COMMAND ‐ 31 LETTERS AND 14 FRAMES A. Provide and install 8" high three‐dimensional, 1/4" thick, upper case letters with a brushed stainless steel finish. Font shall be Arial Bold. Letters shall be all capitals. 31 Letters total. Install, flush mount, over existing wall finish. 31

20B

B. Provide and install fourteen (14) 11"x16" acrylic "sandwich " frames installed on to existing wall with brushed stainless off‐ sets/chrome edge grips. Photos (8"X10") of Chain of Command members will be provided by User prior to install. Placement will be provided after award. Frame construction must allow for multiple change outs per year without reducing the quality of the product or apparatus connection points.

20C

C. Provide and install fourteen (14) Chain of Command engraved plaques/name placeholders for inserts/inserts of name area approximately (5" wide x 3" tall) with name, rank and position. Color of plaque shall coordinate with interior finishes. Personnel information to be provided by Users after award. Install into inside of "sandwiched" frames of chain of Command, below photo, in a removable manner (double stick tape, Velcro, slides, etc.).

AF LOGO AT ENTRANCE ‐ 2 GLASS 24" EACH provide two (2) custom window stickers which are installed on the inside of the window and viewed from the outside. Image shall be of military branch logos and an action photo on each. Window stickers shall be designed to be installed on existing window side lights which may be curved glass walls. Height is approximately 8' and glass windows are approximately 24" wide each.

MARINE LOGO AT ENTRANCE ‐ 3 GLASS 36" EACH provide three (3) custom window stickers which are installed on the inside of the window and viewed from the outside. Image shall be of military branch logos and an action photo on each. Window stickers shall be designed to be installed on existing window side lights which may be curved glass walls. Height is approximately 8' and glass windows are approximately 36" wide each.

FULL LENGTH CUSTOM PRINT WALL COVERING ON CORNER

BESIDE MARINE ENTRANCE ‐ INNER CORNER ‐ WALLS 2'5" AND

7'7"

Provide and install a custom designed, digital printed wall covering which consists of two panels (approximately 2'5" x 9'0" and 7'7"x 9'0"); Wall covering shall completely cover wall from corner to corner or stop at an acceptable breaking location. Wall covering shall run from top of wall base to ceiling grid. Walls shall be prepped and primed to accept wall covering. Final wall graphic shall be protected with a sealed coating applied over the wall covering. Coating shall be a water based polyurethane applied in two coats using a back rolling method with a mohair roller.

CUSTOM WALL COVERING 11'0 " WIDE TO HAVE EACH OF THE

MILITARY LOGOS INSTALLED ON WALL BESIDE THE APP

WAITING CHECK IN DESK

Provide and install a custom designed, digital printed wall covering (approximately 11'0" x 9'0"); Wall covering shall completely cover wall from corner to corner or stop at an acceptable breaking location. Wall covering shall run from top of wall base to ceiling grid. Walls shall be prepped and primed to accept wall covering. Final wall graphic shall be protected with a sealed coating applied over the wall covering. Coating shall be a water based polyurethane applied in two coats using a back rolling method with a mohair roller.

CUSTOM WALL COVERING INSTALLED BEHIND APPLICANT

WAITING CHECK‐IN DESK TO HAVE

WELCOME/DALLAS/MEPCOM ‐ 4'6", 3'0", 7'0" (WALL IN THREE

SECTIONS)

Provide and install a custom designed, digital printed wall covering which consists of three panels (approximately 4'6" x 9'0";

3'0"x 9'0", and 7'0"x 9'0"); Wall covering shall completely cover wall from corner to corner or stop at an acceptable breaking location. Wall covering shall run from top of wall base to ceiling grid. Walls shall be prepped and primed to accept wall covering. Final wall graphic shall be protected with a sealed coating applied over the wall covering. Coating shall be a water based polyurethane applied in two coats using a back rolling method with a mohair roller.

GLASS BLOCK IS 102" HIGH ON BACK OF CEREMONY ROOM ‐

APPLY VINYL LOGO OF DALLAS AND SERVICE LOG WHICH

SHOULD BE ABLE TO BE SEEN FROM ELEVATOR

Provide and install a 60‐80" diameter vinyl appliqué, with full color applied directly to the face of the curved glass block. Logo shall be the Dallas MEPS logo and the service logo. 1

ON CORRIDOR LEADING INTO THE CEREMONY ROOM (ADJ TO

THE TEST ROOM ) INSTALL CUSTOM WALL COVERING THE

LENGTH OF THE WALL WITH PHOTOS REPRESENTING ALL THE

BRANCHES OF THE MILITARY AND THE AMERICAN FLAG.

Provide and install a custom designed, digital printed wall covering (approximately 22'0"x 9'0"); Wall covering shall completely cover wall from corner to corner or stop at an acceptable breaking location. Wall covering shall run from top of wall base to ceiling grid. Walls shall be prepped and primed to accept wall covering. Final wall graphic shall be protected with a sealed coating applied over the wall covering. Coating shall be a water based polyurethane applied in two coats using a back rolling method with a mohair roller.

TEST LOGO ON DOOR OR SOFFIT ABOVE SINGLE DOOR Provide and install a 20" diameter vinyl appliqué, with an etched glass appearance or with full color applied directly to the face of the door or soffit above. Logo shall be the test shield with 4" high lettering to read "TESTING" 1

CEREMONY DEDICATION PLAQUE TO CHIEF KEIL‐BIO AND STORY

AWARDS

Provide a framed shadow box with Chief Keil's biography and story awards; frame shall have a clear acrylic/glass/ wood finish stained to match/ complement the wood stain and species through the facility; Photo and written biography shall be provided by installers; awards provided by MEPS shall be incorporated in the collage which may have different depths for interest; frame shall be approximately 4' x 3'; security apparatus shall be used to ensure frame is not removable by applicants 1

IN 6" RAISED CHROME LETTERS "WELCOME TO THE DALLAS

MEPS" AT COMMAND SUITE ENTRANCE.

Provide and install 10” high, 1/4" thick, three‐dimensional, upper case, letters with a brushed stainless steel finish. Font shall be Arial Bold. Letters shall be all capitals and read “WELCOME TO THE DALLAS MEPS”. Install, flush mount, over existing wall finish.

FRAMES FOR OATHS IN MEDICAL BRIEFING ROOM Provide and install a total of two (2) poster holders each with 2 layers of 1/4" thick clear acrylic and hardware; Image to be provided by User prior to installation; Contractor to print image and provide in final poster holder; poster holders shall be installed on to existing wall with brushed stainless off‐sets/chrome edge grips; Panel approximately 48" high x 36" wide x 1/2" thick

FRAMES FOR OATHS IN COMMAND BRIEFING ROOM Provide and install a total of two (2) poster holders each with 2 layers of 1/4" thick clear acrylic and hardware; Image to be provided by User prior to installation; Contractor to print image and provide in final poster holder; poster holders shall be installed on to existing wall with brushed stainless off‐sets/chrome edge grips; Panel approximately 48" high x 36" wide x 1/2" thick

PRODUCT SUB TOTAL

Site Visit, Design, Shipping, Delevery, Install, Project Management 1

GRAND TOTAL FOR BASE BID