W911XK-15-T-0029_Floating_Plant_Amendment_2.pdf

W56MES50713660

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Project: Dry Dock for the Tug Demolen, Crane Barge Veler and Scow BC-6576

The purpose of this amendment is to revise the scope of w ork and establish a deadline for RFI submissions. There are no further changes.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 30-Sep-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W911XK-15-T-0029

X 9B. DATED (SEE ITEM 11)

14-Sep-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

30-Sep-2015

CODE

CONTRACTING BRANCH

USACE DETROIT DISTRICT

477 MICHIGAN AVENUE, 7TH FLOOR

DETROIT MI 48226-4523

W911XK 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W911XK-15-T-0029

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 2

Summary of SOW changes:

TP-16 REPLACE HATCHES ON CRANE BARGE DECK:

Replace current paragraph with below.

The Contractor is to provide four brand new aluminum deck hatch access doors. Three hatches have the dimensions 30-in x 72-in, and one hatch has a dimension of 30-in x 42-in. (approximate sizes) The four existing hatches shall be removed and replaced with new hatches with the following features: Aluminum hatch, concealed hinges flushed with the deck, rectangular rounded corners shape must match existing opening, lift-outward, and water-tight closures. Hatch handles must have stainless steel Multi-Dog style twist-locks to secure door (a minimum of 4 stainless steel dogs), a device used to hold the hatch open with gas spring assist, and a locking mechanism to prevent unauthorized entry. The Contractor is to provide all the materials, labor, welding, and expertise to ensure the four new hatches replaced are fully functional, operational, and water tight prior to re-sailing of the vessel.

The Government requires the Contractor to purchase the new hatches that are going to be installed as meeting or exceeding the brand name as follows:

Brand name: Freeman Model: 3440

TP-17 REPLACE NAVIGATION LIGHTS ON MAST OF CRANE BARGE VELER

Replace current paragraph with below.

The crane barge Veler needs new LED mast lighting. The Contractor is to provide 14 new LED Perko brand or equivalent lights and install in place of the old lights on the mast and decking of the crane barge Veler. The Contractor will be replacing a quantity of four double lens red over green LED navigation lights (eight LED lights), three red LED lights, two white LED lights, and one green LED light. The Contractor is to provide all the materials, labor, electrical, and expertise to ensure the 14 new LED navigational lights are fully operational prior to re-sailing of the vessel.

TP-34 BUILD DUNNAGE AREA ON DECK WITH STEEL AND TIMBER

Replace current paragraph with below.

W911XK-15-T-0029

The Scow BC-6576 dunnage area requires steel installation to build the dunnage area walls and create a pig pen area. If ordered by the Contracting Officer (CO), the Contractor will remove and dispose of existing decking. The Contractor shall install the steel as detailed below:

The steel needed for the dunnage area would be ½-inch thick rolled steel. The dimensions would be: 3-foot high wall surrounding a (75ft x 26.5ft) area or (203 LF). The top of the wall will be rolled 2 inches towards the outside of the pig pen area. The walls will be secured to the deck by continuous inside and outside 3/8 inch fillet welds. Steel supports are needed to secure the 3-foot high wall surrounding the (75ft x 26.5ft) area of timber. The four walls will be supported by triangle shaped steel supports. The supports dimensions must be: roughly 3-ft in height, a base of 1-ft, with a ½ circle hole cut out of the base adjacent to the wall, to wash between the supports when needed, the hypotenuse of the 3x1 triangle must have a right angle (90degrees) on its edge from top (3-ft) to bottom (deck) for added support to each support and have a 2 inch roll in either direction. There must be 50 supports spaced evenly along the four walls and be welded to the steel walls surrounding the dunnage area.

Once the steel installation work is complete, the Contractor will then supply white oak dunnage boards to finalize the pig pen aboard the Scow BC-6576. White oak dunnage boards are to be 6 inches by 4 inches and installed at varies lengths so that the joints are staggered during installation.

White oak dunnage boards shall be installed as tight as possible with angle tabs welded on center channel to keep boards compressed in place. Contractor shall notify the Government’s Quality Assurance Representative of the installation plan for review prior to installation of the white oak dunnage boards.

SP-5 DIMENSIONS OF PLANTS

Updated the Scow Dimensions.

Length overall: 120-ft Max Beam – Including Guard Rails: 33-ft

SP-3.6 RFIs will not be accepted after 1530 hours Monday, 5 October 2015.

This is a new section that is being added into the SOW.

(End of Summary of Changes)