W911XK-13-T-0049_amendment_0003_FY13_Generators_ _Switchgear_Replacement.pdf

W56MES31090487

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

FY13 Generators and Sw itchgear Replacement

This amendment is issued to change the scope of w ork; update the w age determination and to change the due date from 8 July 2013 to 12 July 2013. Reference changes on the follow ing pages. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 29

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 01-Jul-2013

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W911XK-13-T-0049

X 9B. DATED (SEE ITEM 11)

11-Jun-2013

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

01-Jul-2013

CODE

CONTRACTING DIVISION

DETROIT DISTRICT

477 MICHIGAN AVE

RM 700

DETROIT MI 48226-4523

W911XK 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W911XK-13-T-0049

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0003

Changes to the Scope of Work

Spec in Section 8:

CATERPILLAR Engine Specifications

DELETE:

1. Caterpillar C4.4 Marine Generator Set 72ekW

2. 60 Hz, 1800 rpm Radiator Cooled

ADD:

1. Caterpillar C4.4 Marine Generator Set 76ekW

2. 60 Hz, 1800 rpm

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 08-Jul-2013 02:00 PM to 12-Jul-2013 02:00 PM.

The following have been modified:

SCOPE OF WORK

Service Generators and Switchgear Replacement

1. Purpose

The purpose of this procurement is to replace two (2) generators, three (3) subpanels, switchgear and specified electrical wiring and make electrical connections on board the Tug Billmaier. The Tug Billmaier will be moored at the Duluth Area Office’s Vessel Yard, located at 901 Minnesota Ave, Duluth, MN 55802.

2. Contract Dates

The Contractor can only work on-site Monday through Thursday, excluding Federal holidays, from 0630-1700. The Contractor shall deliver the generators, sub-panels and switchgear on pallets to the Vessel Yard no later than 15 January 2014. The generators, sub-panels and switchgear will be visually inspected by Government personnel upon delivery. The Contractor shall provide a temporary shore power source no later than 5 December 2014. This shore power shall power only specified electrical panels until the new generators and switchgear are placed in service.

The Contractor shall make all electrical connections for the generators and switchgear beginning on 24 February

2014. All work including testing shall be completed no later than 20 March 2014. New sub-panels P-213 and L- 103 shall be connected at the same time as the generators and switchgear. New panel L-102 will be connected once the temporary shore power is disconnected and prior to testing of the switchgear.

Site visit contact Due to the complexity of this contract, a site visit is highly recommended before submission of bids.

Ray Bennink Chief Engineer Sea Going Tug Raymond.L.Bennink@usace.army.mil 218-360-4197

Ed Modin Master, Tug Billmaier Edward.P.Modin@usace.army.mil 218-343-5374

3. List of Submittals

a. All work shall be performed in accordance with applicable provisions of Occupational safety and Health Act (OSHA) and Safety requirements set forth in the Corps of Engineers Manual, EM 385-1-1, entitled “Safety and Health Requirements Manual”, September 2008 which can be found online at www.usace.army.mil or at the Duluth Area Office. The Contractor shall submit an Accident Prevention Plan (APP) and Activity Hazard Analysis (AHA) and other documentation as required by

EM385-1-1.

b. Prior to work commencing, the Contractor shall submit a Temporary power plan. This plan shall include all equipment, wire and routing of all temporary wires. (Para 5.a)

c. Prior to work commencing, the Contractor shall provide Product Data for the following:

1. Generators (Including Factory Test Reports)

2. Switchgear

3. Electrical Panels

4. Digital Meters

5. Cabinets

6. Breakers

7. Wire

d. Prior to commencing the work, the Contractor shall submit a wire routing plan from the generators to the switchgear and from the generators to the existing alarm panel. (Para. 5.d)

e. Prior to commencing work, the Contractor shall submit the qualifications for the electricians doing the work. All electricians must be licensed electricians and experienced in marine grade electrical systems.

f. Prior to commencing work, the Contractor shall submit a work plan that covers the prime contractor and includes all sub-contractors that will be working on site.

g. Prior to fabrication, the Contractor shall submit for approval the layout of the switchgear with all meters and breakers identified. (Para. 6.a)

h. Prior to commencement of the work, the Contractor shall provide O&M manuals, installation manuals, and service manuals for the following:

1. Generators

2. Switchgear

3. Electrical Panels

4. Digital Meters

i. Upon completion of the work, the Contractor shall provide the Government with electronic and paper as-built drawings/schematics for all work performed.

4. USACE Personnel shall:

a. Remove all the current generation equipment from the vessel.

b. Remove all the switchgear components and label all wires. Wires will be labeled with breaker numbers, phase marked, and a description.

c. Install the new Contractor supplied equipment to include:

1. Place and secure the new generators.

2. Make all fuel, water, and exhaust connections to the generators.

3. Place and secure the new switchgear.

4. Place and secure the new sub-panels.

5. Run new wiring from the new sub-panels to the new switchgear, if needed. The Contractor will provide a recommendation on whether to replace the wiring based on its condition and suitability for the new equipment.

5. The Contractor Shall:

a. Connect temporary shore power source to provide 220v single phase power to panels L-101 and L- 102; and 208v three phase power to a three phase pump; 15 Amp. The power source for the temporary shore power will come from the Corps warehouse building (Shown in figures 4 & 5), 220 volt single phase. The existing shore power connection and ship’s transformer may be used by the Contractor.

The Contractor shall ensure that all power connections to the existing switchgear, panels and equipment are disconnected at that time.

b. Provide new generator units to include:

1. Two 120/208 voltage, 3 phase, 72 kW wye configured generators (Para. 8).

2. Generators will meet EPA tier 3 and International Maritime Organization standards.

c. Provide new switchgear and make all electrical connections to include:

1. New cabinets (Para. 7.a.iv)

2. New breakers (Para. 6.a)

3. New digital meters (Para. 7.a.iii)

4. All components within the switchgear equipment will be Marine approved/grade.

d. Provide new wiring and connections to include:

1. All wire to connect the new generators to the switchboard.

2. All wire to connect the generator alarms to the existing alarm panel. All alarms for the new generators shall be wired into the pre-existing alarm panel, Allen-Bradley processor 550. The Government will provide an existing program for the processor. The Contractor shall program the new generators to the existing alarm panel using a Corps provided Dell Latitude D630 Laptop.

e. Replace three phase panels P-213 and L-102, L-103 with Square D, 125 amp 120/208 three phase load centers. Panel P-213 shall be a 20 space load center and L-102 and L-103 shall be 30 space load centers. (Figure 2). The Contractor shall make all electrical connections to these panels.

f. The Contractor shall perform all equipment commissioning, including startup and operational testing.

g. All work and equipment shall come with a minimum of 1 year warranty after equipment commissioning is complete.

1. All material used will be of most current technology for marine components. The contractor shall abide by the National Electrical Code (NEC) and American National Standards Institute

(ANSI).

6. Old Switchgear Specifications

a. The Contractor shall supply new breakers to replace the existing breakers. The current switchgear supplies 208 volt power to the following services:

1. Generator main breaker, 225 Amp

2. Generator main breaker, 225 Amp

3. 440 volt shore power breaker

4. 220 volt shore power breaker

5. L-101, Main deck lighting, 70 Amp, three phase

6. L-102, Engine room lighting, 50 Amp, single phase

7. L-103, Engine room lighting, 100 Amp, three phase

8. L-104, Electric panel, 20 Amp, three phase

9. Hot water tank, 50Amp, 208V single phase

10. P-212, Galley range, 70 Amp, three phase

11. P-216, Marine sewage plant, 50 Amp three phase

12. P-202, Fire pump, 70 Amp, three phase

13. P-205, Air compressor, 20 Amp, three phase

14. V-200, Vent panel, 40 Amp, three phase

15. P-213, A/C unit, 70 Amp, three phase

16. P-210, Bilge pump, 15 Amp, three phase

17. P-204, Air compressor, 20 Amp, three phase

18. P-201, Post lube pump, 15 Amp, three phase

19. P-203, Fuel oil transfer pump, 15 Amp, three phase

20. P-208, Main steering gear, 100 Amp, three phase

21. P-209, Aux. steering gear, 50 Amp, three phase

22. Port facing winch, 50 Amp, three phase

23. Stbd. Facing winch, 50 Amp, three phase

24. P-206, Forward capstan, 100 Amp, three phase

25. P-207, Aft capstan, 100 Amp, three phase

26. Spare, 100 Amp

27. Spare, 50 Amp

28. Spare, 40 Amp

29. Spare, 30 Amp

30. Spare, 20 Amp

7. New Switchgear Specifications

a. The new switchboard shall be equipped with the following Contractor supplied items;

1. Multi functional meter that integrates all elements of monitoring and control into one panel.

1. AMPERES

2. VOLTAGE

3. KILOWATT

4. KILOVOLT

5. HERTZ

2. Capability to receive 220 volt shore power (single phase). This is to run basic electrical needs utilizing breaker from specification 1.4. This breaker is only to power panels L-101 L-102, L-103 and L-104.

3. A space to install existing Alnor pyrometer, model FDX-II. The layout of this pyrometer is shown in figure 3. This pyrometer will be installed by government personnel at a later date.

4. The cabinets shall be built in modular construction for ease of installation. The mounting of the bracket shall include web feet (outside of cabinet on bottom) to hold the cabinet in place.

The total maximum dimensions for the cabinet space is: Height 62.625 inches, Width 28 inches, and Length 55 inches.

New Switchgear Components

Quantity Descriptions

400 Ampere, 400/208/120V 3 phase marine Duty U.L. 891 Listed S.E. - service entrance switchboard. This switchboard is designed to fit in the existing space and consist of the following:

3 NEMA 12 Switchboard Cubicle

1 Lot 400A 3-Phase copper bus

3 400A electrically operated circuit breakers, electrically interlocked

3 200A electrically operated circuit breaker (220V Shore power) (2 Pole A & C Phase)

1 75KVA 440:208/120V transformer 220V

15 Distribution breakers 50A and larger

12 Distribution breakers 15A-40A

9 240:120 PT's

9 400:5 CT's

4 BE3-27/59 relay

3 Multi-function digital power meter (with remote metering capabilities)

2 Speed adjust switch

2 Voltage adjust switch

4 52CS Breaker Control Switch

2 Emergency Stop button (ESB)

8 Pilot Lights (LED)6

1 Synchroscope

1 52CS Breaker Control Switch (4 position)

2 Pilot Lights (LED)

3 Ground detection lights

1 Master control switch

1 24VDC Best battery system

1 Lot control relays

1 Lot terminal blocks

1 Shorting terminal blocks

1 Lot fuse blocks

1 Lot nameplates

1 Lot SIS control wire

2 Auto Close Breakers

1 Parallel Capability

1 Phase Monitor

8. Generator Specifications:

a. CATERPILLAR Engine Specifications

1. Caterpillar C4.4 Marine Generator Set 76ekW

2. 60 Hz, 1800 rpm

3. I-4, 4-Stroke- Cycle- Diesel

4. Displacement: 4.4L (269 cu. In)

5. Bore: 105 mm (4.13 in.)

6. Stroke: 127 mm (4.99 in.)

7. Combustion: Direct Injection

8. Cooling System: 17.5 L

9. Lube Oil System: 8.5L

10. Rotation: (From flywheel end) Counterclockwise

b. Air Inlet System Will Consist of:

1. Air cleaner, single element canister type with service (restriction) indicator and rain cap.

2. Dry insulated turbocharger

3. Glow plug cold start system

c. Control Panel

1. Digital control panel including meters for operating hours, oil pressure, coolant temperature, DC volts, and Off/Manual/Auto control switch. Includes shutdowns with indicating lights for low oil pressure, high coolant temperature, over speed, emergency stop, and fail to start. Provides preheat function, generator running light, remote start disabled light, common alarm / shutdown light, alarm & silence switch, and volt free contacts (common alarm /shutdown, & generator running). AC metering, volts, amperes, frequency.

d. Cooling System

1. Plate type engine oil cooler

2. Gear driven centrifugal jacket water pump

3. Gear driven self priming sea water pump

4. Extended Life Coolant

5. Heat exchanger

6. Expansion tank

e. Exhaust System

1. Dry insulated turbocharger

2. Water-cooled exhaust manifolds

3. Expansion bellows

f. Fuel System

1. Primary fuel filter/water separator with NPT and BSP connectors (ship loose)

2. Secondary fuel filter (LH)

3. Fuel priming pump electric

4. Energize to run shutoff solenoid

g. Generators

1. 12 lead reconnect able, connected 208/120 wye 3 phase, Brushless

2. Separately excited from auxiliary winding to provide 300% short circuit current up to 10 seconds

3. 2/3 Pitch

4. Broad voltage band

5. IP23 water protection, IP4

6. Solid state voltage regulator with integral voltage adjustment potentiometer

7. Class H insulation

8. Connection poles

h. Governing System

1. Electronic governor

2. Load sharing module/droop control

i. Lube System

1. Lubricating oil

2. Oil filter (LH)

3. Dipstick (LH)

4. Fumes disposal (closed system)

5. Lube oil sump drain valve

j. Mounting System

1. Steel base frame with drip pan

2. Anti-vibration mounts

k. Starting/Charging System

1. Negative isolated ground electric system

2. 24 volt starter

3. 24 volt alternator

4. Battery Charger, 10 ampere, float/equalize “smart’ type

l. General

1. Single side service port/starboard

2. OSHA Guarding

3. Electronic governors controlled at switch gear.

4. Remote communication capabilities for monitoring and control.

5. System can be controlled from the switchgear-mounted control panel, or it can be controlled/monitored from a remote site through a personal computer.

WAGE DETERMINATION

WD 05-2285 (Rev.-12) was first posted on www.wdol.gov on 06/25/2013

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2285 Diane C. Koplewski Division of | Revision No.: 12 Director Wage Determinations| Date Of Revision: 06/19/2013 States: Minnesota, Wisconsin

Area: Minnesota Counties of Aitkin, Becker, Beltrami, Carlton, Cass, Clay, Clearwater, Cook, Crow Wing, Hubbard, Itasca, Kanabec, Kittson, Koochiching, Lake, Lake of The Woo, Mahnomen, Marshall, Norman, Otter Tail, Pennington, Pine, Polk, Red Lake, Roseau, St Louis, Wadena, Wilkin Wisconsin Counties of Ashland, Bayfield, Burnett, Douglas, Iron, Price, Rusk, Sawyer, Taylor, Washburn **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE

RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.79 01012 - Accounting Clerk II 16.60 01013 - Accounting Clerk III 18.56 01020 - Administrative Assistant 20.26 01040 - Court Reporter 18.20 01051 - Data Entry Operator I 12.27 01052 - Data Entry Operator II 13.46 01060 - Dispatcher, Motor Vehicle 19.01 01070 - Document Preparation Clerk 14.78 01090 - Duplicating Machine Operator 14.78 01111 - General Clerk I 11.51

01112 - General Clerk II 12.56 01113 - General Clerk III 14.09 01120 - Housing Referral Assistant 20.30 01141 - Messenger Courier 12.25 01191 - Order Clerk I 14.05 01192 - Order Clerk II 15.19 01261 - Personnel Assistant (Employment) I 16.05 01262 - Personnel Assistant (Employment) II 17.95 01263 - Personnel Assistant (Employment) III 20.02 01270 - Production Control Clerk 21.13 01280 - Receptionist 11.40 01290 - Rental Clerk 10.60 01300 - Scheduler, Maintenance 16.27 01311 - Secretary I 16.27 01312 - Secretary II 18.20 01313 - Secretary III 20.30 01320 - Service Order Dispatcher 14.81 01410 - Supply Technician 20.26 01420 - Survey Worker 14.47 01531 - Travel Clerk I 13.72 01532 - Travel Clerk II 14.81 01533 - Travel Clerk III 15.89 01611 - Word Processor I 13.51 01612 - Word Processor II 15.17 01613 - Word Processor III 16.96 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 18.48 05010 - Automotive Electrician 16.89

05040 - Automotive Glass Installer 16.40 05070 - Automotive Worker 16.40 05110 - Mobile Equipment Servicer 14.99 05130 - Motor Equipment Metal Mechanic 17.42 05160 - Motor Equipment Metal Worker 16.40 05190 - Motor Vehicle Mechanic 17.16 05220 - Motor Vehicle Mechanic Helper 15.87 05250 - Motor Vehicle Upholstery Worker 15.58 05280 - Motor Vehicle Wrecker 16.40 05310 - Painter, Automotive 16.63 05340 - Radiator Repair Specialist 16.40 05370 - Tire Repairer 13.24 05400 - Transmission Repair Specialist 17.42 07000 - Food Preparation And Service Occupations 07010 - Baker 12.34 07041 - Cook I 10.76 07042 - Cook II 11.58 07070 - Dishwasher 7.94 07130 - Food Service Worker 10.69 07210 - Meat Cutter 17.76 07260 - Waiter/Waitress 9.38 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 17.84 09040 - Furniture Handler 12.26 09080 - Furniture Refinisher 17.84 09090 - Furniture Refinisher Helper 14.60 09110 - Furniture Repairer, Minor 15.77 09130 - Upholsterer 17.84 11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 10.29 11060 - Elevator Operator 10.96 11090 - Gardener 13.39 11122 - Housekeeping Aide 10.96 11150 - Janitor 11.09 11210 - Laborer, Grounds Maintenance 12.45 11240 - Maid or Houseman 10.24 11260 - Pruner 10.55 11270 - Tractor Operator 12.20 11330 - Trail Maintenance Worker 12.45 11360 - Window Cleaner 11.65 12000 - Health Occupations 12010 - Ambulance Driver 12.63 12011 - Breath Alcohol Technician 16.85 12012 - Certified Occupational Therapist Assistant 18.69 12015 - Certified Physical Therapist Assistant 20.00 12020 - Dental Assistant 17.71 12025 - Dental Hygienist 28.01 12030 - EKG Technician 24.55 12035 - Electroneurodiagnostic Technologist 24.55 12040 - Emergency Medical Technician 12.63 12071 - Licensed Practical Nurse I 14.48 12072 - Licensed Practical Nurse II 16.19 12073 - Licensed Practical Nurse III 18.06 12100 - Medical Assistant 14.00 12130 - Medical Laboratory Technician 19.03 12160 - Medical Record Clerk 15.34 12190 - Medical Record Technician 17.16

12195 - Medical Transcriptionist 16.24 12210 - Nuclear Medicine Technologist 34.98 12221 - Nursing Assistant I 10.66 12222 - Nursing Assistant II 11.98 12223 - Nursing Assistant III 13.07 12224 - Nursing Assistant IV 14.67 12235 - Optical Dispenser 12.84 12236 - Optical Technician 12.93 12250 - Pharmacy Technician 14.21 12280 - Phlebotomist 14.67 12305 - Radiologic Technologist 25.69 12311 - Registered Nurse I 25.14 12312 - Registered Nurse II 29.52 12313 - Registered Nurse II, Specialist 29.52 12314 - Registered Nurse III 35.72 12315 - Registered Nurse III, Anesthetist 35.72 12316 - Registered Nurse IV 42.81 12317 - Scheduler (Drug and Alcohol Testing) 18.97 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 17.73 13012 - Exhibits Specialist II 21.97 13013 - Exhibits Specialist III 26.87 13041 - Illustrator I 17.73 13042 - Illustrator II 21.97 13043 - Illustrator III 26.87 13047 - Librarian 24.32 13050 - Library Aide/Clerk 12.64 13054 - Library Information Technology Systems 21.97 Administrator

13058 - Library Technician 16.20 13061 - Media Specialist I 16.59 13062 - Media Specialist II 18.12 13063 - Media Specialist III 20.20 13071 - Photographer I 15.00 13072 - Photographer II 18.19 13073 - Photographer III 22.54 13074 - Photographer IV 27.57 13075 - Photographer V 33.36 13110 - Video Teleconference Technician 16.28 14000 - Information Technology Occupations 14041 - Computer Operator I 15.98 14042 - Computer Operator II 17.87 14043 - Computer Operator III 20.92 14044 - Computer Operator IV 23.25 14045 - Computer Operator V 25.73 14071 - Computer Programmer I (see 1) 19.03 14072 - Computer Programmer II (see 1) 22.53 14073 - Computer Programmer III (see 1) 27.36 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.98 14160 - Personal Computer Support Technician 25.73 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.96 15020 - Aircrew Training Devices Instructor (Rated) 35.04 15030 - Air Crew Training Devices Instructor (Pilot) 40.44 15050 - Computer Based Training Specialist / Instructor 28.96 15060 - Educational Technologist 29.11

15070 - Flight Instructor (Pilot) 40.44 15080 - Graphic Artist 18.10 15090 - Technical Instructor 19.74 15095 - Technical Instructor/Course Developer 24.15 15110 - Test Proctor 15.93 15120 - Tutor 15.93 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 11.19 16030 - Counter Attendant 11.19 16040 - Dry Cleaner 14.10 16070 - Finisher, Flatwork, Machine 11.19 16090 - Presser, Hand 11.19 16110 - Presser, Machine, Drycleaning 11.19 16130 - Presser, Machine, Shirts 11.19 16160 - Presser, Machine, Wearing Apparel, Laundry 11.19 16190 - Sewing Machine Operator 14.92 16220 - Tailor 15.77 16250 - Washer, Machine 12.41 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 22.10 19040 - Tool And Die Maker 25.88 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.17 21030 - Material Coordinator 21.13 21040 - Material Expediter 21.13 21050 - Material Handling Laborer 12.63 21071 - Order Filler 10.71 21080 - Production Line Worker (Food Processing) 17.17 21110 - Shipping Packer 15.63

21130 - Shipping/Receiving Clerk 13.77 21140 - Store Worker I 15.63 21150 - Stock Clerk 19.08 21210 - Tools And Parts Attendant 17.17 21410 - Warehouse Specialist 17.17 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 24.61 23021 - Aircraft Mechanic I 23.44 23022 - Aircraft Mechanic II 24.61 23023 - Aircraft Mechanic III 25.84 23040 - Aircraft Mechanic Helper 20.70 23050 - Aircraft, Painter 22.65 23060 - Aircraft Servicer 21.17 23080 - Aircraft Worker 22.06 23110 - Appliance Mechanic 24.98 23120 - Bicycle Repairer 13.24 23125 - Cable Splicer 27.72 23130 - Carpenter, Maintenance 21.48 23140 - Carpet Layer 22.07 23160 - Electrician, Maintenance 28.31 23181 - Electronics Technician Maintenance I 26.05 23182 - Electronics Technician Maintenance II 26.81 23183 - Electronics Technician Maintenance III 27.67 23260 - Fabric Worker 21.08 23290 - Fire Alarm System Mechanic 23.44 23310 - Fire Extinguisher Repairer 19.98 23311 - Fuel Distribution System Mechanic 24.50 23312 - Fuel Distribution System Operator 21.26

23370 - General Maintenance Worker 17.89 23380 - Ground Support Equipment Mechanic 23.44 23381 - Ground Support Equipment Servicer 21.17 23382 - Ground Support Equipment Worker 22.06 23391 - Gunsmith I 19.98 23392 - Gunsmith II 22.07 23393 - Gunsmith III 23.44 23410 - Heating, Ventilation And Air-Conditioning 23.44 Mechanic 23411 - Heating, Ventilation And Air Contditioning 24.85 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 23.73 23440 - Heavy Equipment Operator 23.09 23460 - Instrument Mechanic 23.44 23465 - Laboratory/Shelter Mechanic 22.72 23470 - Laborer 12.63 23510 - Locksmith 23.44 23530 - Machinery Maintenance Mechanic 22.84 23550 - Machinist, Maintenance 18.85 23580 - Maintenance Trades Helper 16.62 23591 - Metrology Technician I 23.44 23592 - Metrology Technician II 24.16 23593 - Metrology Technician III 24.99 23640 - Millwright 24.38 23710 - Office Appliance Repairer 21.08 23760 - Painter, Maintenance 22.23 23790 - Pipefitter, Maintenance 29.07 23810 - Plumber, Maintenance 24.55 23820 - Pneudraulic Systems Mechanic 23.44

23850 - Rigger 23.44 23870 - Scale Mechanic 22.07 23890 - Sheet-Metal Worker, Maintenance 26.47 23910 - Small Engine Mechanic 17.88 23931 - Telecommunications Mechanic I 26.45 23932 - Telecommunications Mechanic II 27.27 23950 - Telephone Lineman 23.44 23960 - Welder, Combination, Maintenance 19.95 23965 - Well Driller 21.56 23970 - Woodcraft Worker 23.44 23980 - Woodworker 18.65 24000 - Personal Needs Occupations 24570 - Child Care Attendant 11.20 24580 - Child Care Center Clerk 13.95 24610 - Chore Aide 10.81 24620 - Family Readiness And Support Services 12.95 Coordinator 24630 - Homemaker 17.83 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.17 25040 - Sewage Plant Operator 23.08 25070 - Stationary Engineer 23.17 25190 - Ventilation Equipment Tender 18.84 25210 - Water Treatment Plant Operator 23.08 27000 - Protective Service Occupations 27004 - Alarm Monitor 20.47 27007 - Baggage Inspector 11.27 27008 - Corrections Officer 21.97 27010 - Court Security Officer 20.42 27030 - Detection Dog Handler 14.85

27040 - Detention Officer 21.97 27070 - Firefighter 16.27 27101 - Guard I 11.27 27102 - Guard II 14.85 27131 - Police Officer I 23.38 27132 - Police Officer II 25.97 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 10.28 28042 - Carnival Equipment Repairer 10.73 28043 - Carnival Equpment Worker 9.09 28210 - Gate Attendant/Gate Tender 13.80 28310 - Lifeguard 11.34 28350 - Park Attendant (Aide) 15.43 28510 - Recreation Aide/Health Facility Attendant 11.27 28515 - Recreation Specialist 15.51 28630 - Sports Official 12.30 28690 - Swimming Pool Operator 13.78 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 22.80 29020 - Hatch Tender 22.80 29030 - Line Handler 22.80 29041 - Stevedore I 21.78 29042 - Stevedore II 24.36 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 16.56 30022 - Archeological Technician II 18.65

30023 - Archeological Technician III 23.01 30030 - Cartographic Technician 22.89 30040 - Civil Engineering Technician 25.25 30061 - Drafter/CAD Operator I 16.51 30062 - Drafter/CAD Operator II 18.62 30063 - Drafter/CAD Operator III 20.60 30064 - Drafter/CAD Operator IV 25.34 30081 - Engineering Technician I 14.97 30082 - Engineering Technician II 16.80 30083 - Engineering Technician III 18.79 30084 - Engineering Technician IV 23.28 30085 - Engineering Technician V 28.48 30086 - Engineering Technician VI 34.46 30090 - Environmental Technician 21.39 30210 - Laboratory Technician 21.32 30240 - Mathematical Technician 22.89 30361 - Paralegal/Legal Assistant I 18.62 30362 - Paralegal/Legal Assistant II 22.37 30363 - Paralegal/Legal Assistant III 27.38 30364 - Paralegal/Legal Assistant IV 33.12 30390 - Photo-Optics Technician 22.89 30461 - Technical Writer I 21.42 30462 - Technical Writer II 26.19 30463 - Technical Writer III 31.70 30491 - Unexploded Ordnance (UXO) Technician I 22.74 30492 - Unexploded Ordnance (UXO) Technician II 27.51 30493 - Unexploded Ordnance (UXO) Technician III 32.97 30494 - Unexploded (UXO) Safety Escort 22.74

30495 - Unexploded (UXO) Sweep Personnel 22.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 19.67 Surface Programs 30621 - Weather Observer, Senior (see 2) 22.89 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 13.34 31030 - Bus Driver 16.93 31043 - Driver Courier 14.34 31260 - Parking and Lot Attendant 12.44 31290 - Shuttle Bus Driver 15.42 31310 - Taxi Driver 15.13 31361 - Truckdriver, Light 15.38 31362 - Truckdriver, Medium 15.99 31363 - Truckdriver, Heavy 19.03 31364 - Truckdriver, Tractor-Trailer 19.03 99000 - Miscellaneous Occupations 99030 - Cashier 8.39 99050 - Desk Clerk 9.36 99095 - Embalmer 31.81 99251 - Laboratory Animal Caretaker I 11.47 99252 - Laboratory Animal Caretaker II 12.16 99310 - Mortician 31.81 99410 - Pest Controller 14.83 99510 - Photofinishing Worker 11.95 99710 - Recycling Laborer 15.90 99711 - Recycling Specialist 17.45 99730 - Refuse Collector 15.01 99810 - Sales Clerk 11.04 99820 - School Crossing Guard 12.24

99830 - Survey Party Chief 22.95 99831 - Surveying Aide 15.42 99832 - Surveying Technician 20.16 99840 - Vending Machine Attendant 14.70 99841 - Vending Machine Repairer 16.40 99842 - Vending Machine Repairer Helper 14.78

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $3.81 per hour or $152.40 per week or $660.40 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541.

Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY:

If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day).

However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.

gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE

{Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination.

Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

(End of Summary of Changes)