Asbestos Survey Building 11293 ceiling drywall insulation concrete.pdf

ASBESTOS SAMPLING EVENT

PREPARED FOR:

Pride Industries Attn: Mr. Victor Duenas

1334 Marshall Rd.

Fort Bliss, TX 79906

PROJECT:

Asbestos Sampling Event Fort Bliss

Building 11293 Fort Bliss, Texas

PREPARED BY:

L&P Scientific Consulting, LLC 13291 Montana Ave.

El Paso, TX 79938

DSHS License No. 10-0385

DATE OF ASBESTOS TESTING:

May 13, 2019

LPSC Project No. 19200

13291 Montana Ave.

El Paso, TX, 79938

(915) 838-1188 Fax (915) 838-1166 www.lpscientific.com

Asbestos Sampling Event L&P Scientific Consulting, LLC Fort Bliss - Building 11293 LPSC Project No. 19200

13291 Montana Ave. El Paso, TX 79938 (915) 838-1188 Fax (915) 838-1166 www.lpscientific.com

May 14, 2019

Pride Industries Attn: Mr. Victor Duenas

1334 Marshall Rd.

Fort Bliss, TX 79906

Project: Asbestos Sampling Event

Fort Bliss Building 11293

El Paso, TX 79906

Mr. Duenas:

L&P Scientific Consulting, LLC (LPSC) is pleased to submit this report of the asbestos sampling event conducted at the building described above. This sampling event consisted of the collection of six (6) bulk samples following the federal AHERA and NESHAP rules, and applicable state regulations regarding asbestos-containing materials in buildings scheduled for renovation or repair.

This sampling event was performed by Mr. Miguel Dominguez; certified asbestos inspector, on May 13, 2019. Mr. Dominguez has been trained in accordance with all applicable regulations.

We appreciate the opportunity to be of service to you. Please call if you have any questions or if we may be of further assistance.

Sincerely, Reviewed by, Miguel Dominguez Fernando Ocana Asbestos Consultant Asbestos Inspector DSHS Lic. No.105321 DSHS Lic. No.603594

Asbestos Sampling Event L&P Scientific Consulting, LLC Fort Bliss - Building 11293 LPSC Project No. 19200

13291 Montana Ave. El Paso, TX 79938 (915) 838-1188 Fax (915) 838-1166 www.lpscientific.com

SUMMARY

L&P Scientific Consulting, LLC (LPSC) presents the findings of the asbestos sampling event performed at Fort Bliss - Building 11293. The purpose of our testing was to identify, locate, and quantify suspect asbestos-containing materials (ACM), if any, which may be disturbed during the repair activities.

The laboratory results do not indicate asbestos present in any of the samples collected and analyzed.

INTRODUCTION

The asbestos sampling event was conducted by Mr. Miguel Dominguez on May 13, 2019, and was performed in accordance with the federal AHERA rules (40 CFR Part 763 Subpart E) and the NESHAP regulations requiring an asbestos inspection for buildings scheduled for renovation or repair (40 CFR Part 61.145). During our site reconnaissance, five (5) homogeneous areas were identified and consisted of the following:

Homogeneous Area Location (see attached drawing) Ceiling Drywall Materials Room 507 Above Drop Ceiling

Compound Between Drywall and Insulation Room 507 Above Drop Ceiling

Ceiling Drywall Joint Compound Room 507 Above Drop Ceiling

Ceiling Insulation Room 507 Above Drop Ceiling

Concrete Floor Materials Room 607 Table 1 (Homogenous Areas Identified During the Inspection)

DESCRIPTION OF BUILDING

The areas tested were limited to the ceiling area above the drop ceiling in Room 507 and the concrete floor in Room 607 (please see attached drawing for location). Building materials consisted of gypsum wallboard, insulation compound and concrete materials.

SAMPLING PLAN

Prior to sampling, a visual survey was performed to establish homogeneous areas. Suspect Asbestos- Containing Materials (ACM) were touched by the inspector to determine their friability. Five (5) homogeneous areas were established and at least one to two samples were taken. A homogeneous area is considered as an area of surfacing material, thermal system insulation material, or miscellaneous material that is uniform in color and texture. Non-suspect building materials that were not sampled during this inspection include: glass, metal, and wood materials. Destructive sampling was not performed to locate hidden and inaccessible materials.

ANALYSIS OF BULK SAMPLES

A total of six (6) bulk samples were collected and submitted for analysis. Bulk samples collected were sampled following the AHERA protocol and were analyzed for asbestos content at Crisp Analytical Laboratories located in Carrollton, Texas utilizing Polarized Light Microscopy (PLM) with optical dispersion staining in accordance with the Environmental Protection Agency (EPA) interim Method 600/R-93/116. An asbestos containing building material includes any asbestiform varieties of chrysotile, amosite, crocidolite, tremolite, anthophyllite, and actinolite containing greater than 1% of any of those substances as determined by appendix A, Subpart F, 40 CFR part 763 section 1. EPA

Asbestos Sampling Event L&P Scientific Consulting, LLC Fort Bliss - Building 11293 LPSC Project No. 19200

13291 Montana Ave. El Paso, TX 79938 (915) 838-1188 Fax (915) 838-1166 www.lpscientific.com

NESHAP Part 61 defines friable ACM as when dry can be pulverized, crushed or reduced to a powder by hand pressure.

RESULTS

The laboratory results do not indicate asbestos present in any of the samples collected and analyzed.

CONCLUSION

LPSC has performed an asbestos sampling event at Fort Bliss - Building 11293. Based on the laboratory results, no further asbestos investigation is recommended for areas tested.

END OF REPORT

Laboratory Results

Attn:

Customer Project:

Reference #: Date: 5/14/2019

Analysis and Method

Discussion

Qualifications

CA Labs

Dedicated to Dedicated to Dedicated to Dedicated to

QualityQualityQualityQuality

Crisp Analytical, L.L.C.

1929 Old Denton Road

Carrollton, TX 75006

Phone 972-242-2754

Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32

Baton Rouge, LA 70809

Phone 225-751-5632

Fax 225-751-5634

Materials Characterization - Bulk Asbestos Analysis Laboratory Analysis Report - Polarized Light

L&P Scientific Consulting, LLC. Miguel Dominguez

13291 Montana Ave

El Paso, TX 79938 19200, Fort Bliss Building 11293 Rooms 507 and 607

CAL19053017AG

Summary of polarized light microscopy (PLM / Stereomicroscopy bulk asbestos analysis) using the methods described in 40CFR Part 763

Appendix E to Subpart E (Interim and EPA 600 / R-93 / 116 (Improved). The sample is first viewed with the aid of a stereomicroscope. Numerous liquid slide preparations are created for analysis under the polarized microscope where identifications and quantifications are preformed. Calibrated liquid refractive oils are used as liquid mouting medium. These oils are used for identification (dispersion staining). A calibrated visual estimation is reported, should any asbestiform mineral be present. Other techniques such as acid washing are used in conjugation with refractive oils for detection of smaller quantities of asbestos. All asbestos percentages are based on calibrated visual estimation traceable to NIST standards for regulated asbestos. Traceability to measurement and calibration is achieved by using known amounts and types of asbestos from standards where analyst and laboratory accuracy are measured. As little as 0.001% asbestos can be detected in favorable samples, while detection in unfavorable samples may approach the detection limit of 0.50% (well above the laboratory definition of trace).

Vermiculite containing samples may contain trace amounts of actinolite/tremolite. When not detected by PLM, these samples should be analyzed using TEM methods and / or water separation techniques. Suspected actinolite/vermiculite presence will be indicated through the sample comment section of this report.

Fibrous talc containing samples may contain a regulated asbestos fiber known as anthophyllite. Under certain conditions the same fiber may actually contain both talc and anthophyllite (a phenomenon called intergrowth). Again, TEM detection methods are recommended. CA Labs PLM report comments will denote suspected amounts of asbestiform anthophyllite with talc, where further analysis is recommended.

Some samples (floor tiles, surfacings, etc.) may contain fibers too small to be delectable by PLM analysis and should be analyzed by TEM bulk protocols.

A "trace asbestos" will be reported if the analyst observes far less than 1% asbestos. CA Labs defines "trace asbestos" as a few fibers detected by the analyst in several preparations and will indicate as such under these circumstances.

Since allowable variation in quantification of samples close to 1% is high, <1% may be reported. Such results are ideal for point counting, and the technique is mandatory for friable samples (NESHAP, Nov. 1990 and clarification letter 8 May 1991) under 1% percent asbestos or "trace asbestos".

In order to make all initial PLM reports issued from CA Labs NESHAP compliant, all <1% asbestos results (except floor tiles) will be point counted at no additional charge.

CA Labs is accredited by the National Voluntary Accreditation Program (NVLAP) for selected test methods for airborne fiber analysis (TEM), and for bulk asbestos fiber analysis (PLM). CA Labs is also accredited by AIHA LAP, LLC. in the PLM asbestos field of testing for Industrial Hygiene. All analysts have completed college courses or hold a degree in a natural science (geology, biology, or environmental science). Recognition by a state professional board in one these disciplines is preferred, but not required. Extensive in-house training programs are used to augment the educational background of the analyst. The Laboratory Director and Quality Manager have received supplemental McCrone Research training for asbestos identification. Analysis performed at Crisp Analytical Labs, LLC 1929 Old Denton Road Carrollton, TX 75006

Dallas NVLAP Lab Code 200349-0 TEM/PLM TCEQ# T104704513-15-3 TDH 30-0235

AIHA LAP, LLC Laboratory #102929

Labs

A

C

/data/wordandspreadsheets/templates/asbestos/PLMReport.xls (Revision 3 3/7/17) Page 1 of 4

Overview of Project Sample Material Containing Asbestos

Customer Project: 19200, Fort Bliss Building 11293 Rooms 507 and 607CA Labs Project #: CAL19053017AG

No Asbestos Detected.

Glossary of abbreviations (non-asbestos fibers and non-fibrous minerals):

CA Labs

Dedicated to Dedicated to Dedicated to Dedicated to

QualityQualityQualityQuality

Crisp Analytical, L.L.C.

1929 Old Denton Road

Carrollton, TX 75006

Phone 972-242-2754

Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32

Baton Rouge, LA 70809

Phone 225-751-5632

Fax 225-751-5634

Sample # Layer

Analysts Physical Description of

Subsample

Asbestos type / calibrated visual estimate percent

List of Affected Building

Material Types

Dallas NVLAP Lab Code 200349-0 TEM/PLM TCEQ# T104704513-15-3 TDH 30-0235

AIHA LAP, LLC Laboratory #102929 ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot - other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay)

This report relates to the items tested. This report is not to be used by the customer to claim product certification, approval or endorsement by NVLAP, NIST, AIHA LAP, LLC, or any other agency of the federal government. This report may not be reproduced except in full without written permission from CA Labs. These results are submitted pursuant to CA Labs' current terms and sale, condition of sale, including the company's standard warranty and limitations of liability provisions and no responsibility or liability is assumed for the manner in which the results are used or interpreted. Unless notified in writing to return the samples covered by this report, CA Labs will store the samples for a period of ninety (90) days before discarding. A shipping or handling fee may be assessed for the return of any samples.

/data/wordandspreadsheets/templates/asbestos/PLMReport.xls (Revision 3 3/7/17) Page 2 of 4

Polarized Light Asbestiform Materials Characterization

Customer Info: Attn: Customer Project:

5/14/2019

5/14/19 10:30AM

Phone # 5/13/2019

Fax #

Senior Analyst

Julio Robles

CA Labs

Dedicated to Dedicated to Dedicated to Dedicated to

QualityQualityQualityQuality

Crisp Analytical, L.L.C.

1929 Old Denton Road

Carrollton, TX 75006

Phone 972-242-2754

Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32

Baton Rouge, LA 70809

Phone 225-751-5632

Fax 225-751-5634

Miguel Dominguez CA Labs Project #:

L&P Scientific Consulting, LLC.

19200, Fort Bliss Building

11293 Rooms 507 and 607

CAL19053017AG

13291 Montana Ave

El Paso, TX 79938 Date:

Turnaround Time: Samples Received:

915-838-1188 4 hours Date Of Sampling:

915-838-1166 Purchase Order #:

Sample # Com ment

Layer

Analysts Physical Description of

Subsample

Homo-geneo us

(Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type

/ percent

S-01 1-1

Ceiling Drywall Materials

Above DC/ white drywall with brown paper n None Detected 23% ce 77% qu,gy

S-02 2-1

Ceiling Compound Between

Drywall and Insulation/ white compound y None Detected 100% mi,ca

2-2 yellow insulation y None Detected 100% fg

S-03 3-1

Ceiling Drywall Joint

Compound/ white compound y None Detected 100% mi,qu,ca

3-2 white drywall with brown paper n None Detected 28% ce 72% qu,gy

S-04 4-1

Ceiling Insulation/ yellow insulation y None Detected 100% fg

S-05 5-1

Concrete Floor Materials/ tan mastic y None Detected 100% gy,bi

Dallas NVLAP Lab Code 200349-0 TEM/PLM TCEQ# T104704513-15-3 TDH 30-0235

AIHA LAP, LLC Laboratory #102929 Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116). All samples received in good condition unless noted.

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gy - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastonite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Jeremy Ayars Technical Manager

Analyst Tanner Rasmussen

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

10. TEM analysis suggested

/data/wordandspreadsheets/templates/asbestos/PLMReport.xls (Revision 3 3/7/17) Page 3 of 4

Polarized Light Asbestiform Materials Characterization

Customer Info: Attn: Customer Project:

5/14/2019

5/14/19 10:30AM

Phone # 5/13/2019

Fax #

Senior Analyst

Julio Robles

CA Labs

Dedicated to Dedicated to Dedicated to Dedicated to

QualityQualityQualityQuality

Crisp Analytical, L.L.C.

1929 Old Denton Road

Carrollton, TX 75006

Phone 972-242-2754

Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32

Baton Rouge, LA 70809

Phone 225-751-5632

Fax 225-751-5634

Miguel Dominguez CA Labs Project #:

L&P Scientific Consulting, LLC.

19200, Fort Bliss Building

11293 Rooms 507 and 607

CAL19053017AG

13291 Montana Ave

El Paso, TX 79938 Date:

Turnaround Time: Samples Received:

915-838-1188 4 hours Date Of Sampling:

915-838-1166 Purchase Order #:

Sample # Com ment

Layer

Analysts Physical Description of

Subsample

Homo-geneo us

(Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type

/ percent

5-2 gray concrete y None Detected 100% qu,ca

S-06 6-1

Concrete Floor Materials/ gray concrete y None Detected 100% qu,ca

Dallas NVLAP Lab Code 200349-0 TEM/PLM TCEQ# T104704513-15-3 TDH 30-0235

AIHA LAP, LLC Laboratory #102929 Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116). All samples received in good condition unless noted.

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gy - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastonite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Jeremy Ayars Technical Manager

Analyst Tanner Rasmussen

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

10. TEM analysis suggested

/data/wordandspreadsheets/templates/asbestos/PLMReport.xls (Revision 3 3/7/17) Page 4 of 4

Drawing

Licenses and Certifications

SSN: 000001081

P.O. Box 786 - Lawrence, KS. 66044 - 800.444.6382

Expires: 1/18/2020

Certificate # ME05E06EDBFCAD4CA

Miguel Dominguez has on 1/18/2019, in El Paso, TX completed the requirements for asbestos accreditation under Section 206 of TSCA Title II, 15 USC 2646

4-hr. Asbestos Inspector Refresher as approved by TX and the US EPA under 40 CFR 763 (AHERA) from 1/18/2019 to 1/18/2019 and passed the associated exam on 1/18/2019 with a score of at least 70%

Instructor

Juan Ayala

Thomas Mayhew

President www.metaenvironmental.net