W911SD20R0025 Solicitation- Rappell Tower Maint FY20.pdf

SEE ADDENDUM

(No Collect Calls)

W911SD20R0025 03-Feb-2020

b. TELEPHONE NUMBER

845-938-8179

8. OFFER DUE DATE/LOCAL TIME

12:00 PM 24 Feb 2020

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W911SD9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

SONYA VAN VALKENBURG

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0011372475

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

MICC - WEST POINT

681 HARDEE PLACE

WEST POINT NY 10996-1514

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W16BCU 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

SEE SCHEDULE

SEE SCHEDULE

US MILITARY ACADEMY

WEST POINT NY 10996

TEL: FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$8,000,000

NAICS:

811310

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF161

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W911SD20R0025

Section SF 1449 - CONTINUATION SHEET

SCOPE OF WORK

CA R0607 0J

SCOPE OF WORK - RAPPELLING TOWERS/SLIDE FOR LIFE/CARGO CLIMBING

NET.

The Contractor shall provide all labor, material, equipment, and supervision necessary to accomplish yearly preventative maintenance, inspection and certification on the Rappelling Tower located at South Dock,. Use check list, Attachment titled Appendix A. Rappel Tower to perform inspection and certification of Rappelling Tower, to include anchor points. Inspection and certification for all wire ropes and safety fall nets on the Slide for Life and the supporting guy cables and cable hardware on the Confidence Climb located at Camp Buckner, inspection and testing of the anchor points at the Pine Ridge Rappel Site located off Bull Pond Road, and the inspection, testing and certification of the safety tie off line and the safety line hardware and anchor points across the spillway on Stillwell Dam West Point, NY 10996. Install one (1) Cargo climbing net on Marne One Obstacle at Camp Buckner. Attachment title Appendix B. Contract shall have a base year performance period of 1 April 2020 thru 31 March 2021 with 4 option years.

1. GENERAL.

A. The intent of this service contract is the complete inspection, certification and maintenance to insure trouble free and safe operation of the Rappelling Tower located at South Dock, the anchor points at the Pine Ridge Rappel site, the safety line at Stillwell Dam and the safe use of the Slide for Life cable, Cargo Net and confidence Climb located at Camp Buckner.

B. All work to be accomplished between 1 April 2020 and 30 March 2021 of each calendar year.

II. EXECUTION.

The contractor shall;

a. Be responsible for any damages incurred by him and his employees. Ensure control barriers are in place to prevent any property and facility damages.

b. Leave all areas clean and free of litter.

c. Perform all services during normal work hours (8:00 am – 4:30 pm) Monday through Friday, excluding Federal Holidays.

d. Coordinate dates and times of services with the COR, Mr. Mike Kirk (845) 938-4979, a minimum of two weeks prior to anticipated star of services.

e. Perform all inspections, maintenance and repairs in accordance with Attachment A and current ANSI Standards, NYS Industrial Code Rule 32, OSHA 29 CFR 1926 regulations, OSHA 29 CFR Part 1910, the US Army CORPS of Engineer’s EM 385-1 standards, all Army regulations and TRADOC Pam 385-1. Contractor is to notify the COR immediately upon finding any deficiencies that are not directed to be repaired within these specifications.

f. The contractor shall provide a written report of any deficiencies noted during any inspections.

The report shall include a detailed cost estimate to include parts, labor and materials of what repairs are required and should be submitted to the COR within 24 hours of identification of deficiencies. The COR will then determine the proper course of action with the KO.

g. The written report shall be submitted to the COR, Mr. Mike Kirk at Bldg. 667A, 4th Floor, CCSB, West Point NY 10996, documenting all work performed on the components of the Rappelling Tower, Pine Ridge Rappel site, Stillwell safety line and Camp Buckner Slide for Life and Confidence Climb.

h. Identify all deficiencies found, corrective measures taken, replacement parts required, quantities and quality of lubricants utilized. Same shall be submitted within 30 days upon completion of services.

i. Insure Rappelling Tower, Pine Ridge Rappel site, Stillwell safety line and Slide for Life and Confidence Climb to be in full and safe working order.

j. Provide all parts necessary to accomplish maintenance and repairs as identified in the Performance Section (III) of this SOW.

k. Be ANSI certified to install and inspect structural support cables, testing of rappelling supports and anchor points.

l. Inspection and certification of all wire ropes specified in the performance section shall be performed by a certified wire rope inspector and/or certified engineer. The contractor shall provide proof of certification within five (5) calendar days to the Contracting Officer (KO) upon signing of the contract.

m. Contractor shall respond to emergency services as and when called for by the COR or KO and NLT within twenty four (24) hours of notification (email, phone call) by same.

n. Contractor shall ensure all anchor point have been load tested to insure that they will accommodate a dead load weight of at least 400 pounds each. (29 CFR 1910.66, Appendix C

(D) 9c) (10).

III. WORK TO BE PERFORMED.

A. Rappelling Tower Maintenance (Note: Use check list, Attachment A, to perform Inspection, Testing and Certification of Rappelling Towers).

1. Check for cracks in welds and general appearances that may indicate deterioration of safety rails, supports and anchor points located on upper deck.

2. As per TRADOC 385-1 (2009) Appendix D Tower Check list from TRADOC Safety.

3. Check guy cables tension, covering, anchorage and turn buckles protective covering.

4. Check for cracks and general appearance that may indicate deterioration of decking, stair treads, stair railings, landings and wall fac. Replace pressure treated wood as necessary.

5. Replace pressure treated wood on the following; deck, stair treads, stair railings, landings and wall face as determined during performance of # 4 above.

6. Check edge padding for wear and securely fastened. Replace as necessary, Government will supply replacement padding.

7. Pressure wash entire tower, except for pressure treated support columns and apply wood sealer to all wood on towers that is not scheduled for painting. This is to be done during the Base & third (3rd) Option Years Only.

8. Paint entire deck, stairs and landings with non-skid paint. Paint must conform to pressure treated wood.

9. Replace yellow warning line to match existing in kind with three (3) inch wide glue down tape or “safety yellow” paint.

B. SLIDE FOR LIFE

1. Perform a complete and detailed inspection of the Slide for Life at Camp Buckner to insure that the wire ropes are safe for their intended use.

2. Inspect and certify the Slide for Life wire rope located at Camp Buckner. This shall include its tensioning, anchorage, guy cables and connections.

3. Report shall be included in the total PM report on a form applicable to satisfy the requirements of ANSI and TRADOC PAM 385-1 and signed by the certified wire rope inspector and/or certified engineer.

4. Inspect and replace, when necessary, safety fall nets. USMA Range Operations will supply the nets.

C. CONFIDENCE CLIMB.

1. Perform a complete and detailed inspection of the Confidence Climb at Camp Buckner to ensure that the guy cables are secured and that the cables are safe for their intended use.

2. Inspect and certify the Confidence Climb at Camp Buckner. This shall include guy cables tensions, anchor and termination connections.

3. Inspection and maintenance will not include the wooden structure itself.

C.1. ADDITIONAL WORK. – WATER CONFIDENCE COURSE.

1. Perform a complete and detailed inspection of the Water Confidence Course at Camp Buckner. Check towers for cracks in welds, mechanical fasteners and general appearance that may indicate deterioration of structural integrity.

2. Inspect all wire ropes to include its tensioning, anchorage, guide cables and connections.

Inspection and maintenance includes the ling cables (combination of wire and rope) that runs from the obstacle to the shore next to the “slide for life” obstacle.

3. Inspect the personnel net that hands from the obstacle. Inspect to include net, perimeter wire rope, connections and hardware. Test shall follow current OSHA 1926.502 © and ANSI standard 10.11-1989 (R1989), follow sections 10, 11, 13 and 14. Section 9 of standard is neither feasible nor practical so we follow the exception in the standard.

4. Do an underwater visible inspection below the Water Confidence Course I-beam and Slide for Life cable for debris that might accumulate in the fall areas. Remove any loose debris that is in the fall area that could cause injury for someone falling into the water.

D. PINE RIDGE RAPPEL SITE.

1. Inspect, test and certify all anchor points on the rappel site. Anchors are on top of the rock surface at the rappel site.

2. Test each anchor point to 1200 pounds each. Anchor will be tested with s aide pull to replicate the way they’re used during training.

E. STILLWELL SAFETY TIE-OFF LINE.

1. Inspect, test and certify all anchor pints, swivel eyes, eye bolts, bolts, wire rope thimbles, steel angle iron/frame rope supports on dam, flanges and entire safety line tie off mechanisms and equipment.

2. Inspect the wire rope to include its tensioning, anchorage and connections.

3. Safety line inspection and maintenance will be performed once a year. Safety line is used for water plant workers to connect to and maneuver across the dam to inspect, repair and maintain the lade water level control boards twice a year or when required.

4. Inspect all welds on flanges, anchor points and steel framing. Prep and pain angle iron/frame rope supports on dam every other year and/or when needed as per the COR discretion. Paint required during Base Year, 2nd Year and 4th year options. Paint must conform to metal surfaces under wet exterior conditions.

F. INSTALL CARGO CLIMBING NET AT CAMP BUCKNER.

1 Provide rigging and all necessary equipment and supplies to install one (1) cargo climbing net on the Marne Tough One obstacle at Camp Buckner.

2. The contractor shall purchase and supply the cargo net to the specifications listed. The Cargo net will be 14’ W x 32’ L, 3 stranded, rope climbing net , 8” x 8” square mesh openings, made w/all 1” diameter Manila Rope. The rope shall be natural color, UV and slip resistant. Contractor shall also purchase and supply the lashing cord to be attached to wooden structure as well as all materials required to attach and install climbing rope. See Attachment “B” to view existing Marne obstacle

3. All hooks, clips, connectors and miscellaneous hardware needed for installation will be stainless steel. All ropes shall be securely mounted and fastened to supporting timbers and/or equipment with ends tied and taped.

4. The cargo net is located at the Marne Obstacle course on the “tough One” obstacle. The net is attached at the top of tower 32’ high and hangs to the ground.

5. Supply all necessary hardware and lashing rope and install for a complete installation.

6. Contractor shall insure all work and workmanship is guaranteed. All work must be installed to the specifications provided and to meet TRADOC Pam 385-1 and Range Control Operations Specifications. All work will be inspected and approved, by the COR and Range Control, during installation and prior to agreeing on 100% competition.

APPENDIX A

RAPPEL TOWER INSPECTION

Use the rappel tower checklist to perform the yearly inspection, maintenance and testing program. Submit a written report documenting all inspections, maintenance and testing on the rappel tower.

Rappel Tower Inspection Checklist

YES NO Conditions Is the tower structurally sound?

Are all open areas (above 4 feet) protected with guardrails?

Are all guardrails a minimum of 42 inches high and capable of withstanding a side force of 200 pounds?

Are toe boards installed in all areas where personnel could pass underneath?

Do all stairs/fixed ladders comply with Occupational Safety and Health Administration standards?

Do all tower rope stations have 3 anchor points each?

Have all rappel rope anchor points been load tested and certified to 400 pounds static load each?

Have all fast rope anchor points been tested and certified to 400 pounds static load each, per person on the rope?

Are all anchor points in good condition and free of corrosion, sharp edges, burrs, etc.?

Is the tower deck free of trip/slip hazards (e.g., water, protruding nails/bolts, and splinters)?

Are the rappel wall face and the fast rope area free of protrusions and broken or loose boards?

Do the tower deck and the stairway tread have a nonskid surface?

Is there padding on all edges that rope and/or personnel cross?

Is the edge padding in good condition and securely fastened?

Are there any signs of insect infestation?

Is the landing area free of obstructions and hazards?

Are all structural areas of the tower that a Rappeller might contact during rappel/fast rope operations properly padded?

Is all structural padding in good condition and securely fastened?

Are all areas that pose a trip hazard marked in yellow?

Are the tower platform and all rappel rope stations accessible without having to climb over any obstacles

(e.g., guardrails, support cables)?

Are there any signs or visible broken support boards or cross members?

Are guy wires (wire rope) installed at correct angle in relation to tower, secured to platform and at the proper tensile strength?

Are guy wires (wire rope) protected with a plastic coating and do the turnbuckles have protective covers installed?

Can the rappel tower be locked to deny access?

Attachment “B” (Obstacle Pictures).

CONTRACTOR REQUIREMENTS

Attachment 1 List of Contractor Requirements

Paragraph Number

List of Contractor Requirements {Search PWS for all 'Contractor Shall" Copy and paste those requirements in this section below. Select a random number of these requirement each surveillance period for checklists items.}

THE CONTRACTOR SHALL:

A. Be responsible for any damages incurred by him and his employees.

B. Leave all areas clean and free of litter.

C. Perform all services during normal work hours (8:00 am ‐ 4:30 pm) Monday through Friday.

Excluding Federal holidays.

D. Coordinate dates and times of services with the COR, Mr. Mike Kirk (845) 938‐4979.

A minimum of two weeks prior to anticipated start of services.

E. Perform all inspections, maintenance and repairs in accordance with the Attachment A and current ANSI Standards, NYS Industrial Code Rule 32, OSHA 29 CFR 1926 regulations, OSHA 29 CFR Part 1910, the US Army CORPS of Engineer's EM 385‐1‐1 standards, all Army regulations and TRADOC Pam 385‐1.

F. Notify COR immediately upon finding any deficiencies that are not directed to be repaired within these specifications. The Contractor shall provide a written report of any deficiencies noted during inspections. The report shall include a detailed cost estimate to include parts, labor and materials of what repairs are required and should be submitted to the COR within 24 hours of identification of deficiencies.

The COR will then determine the proper course of action with the KO and the Directorate of Contracting (DOC) office.

G. Submit a written report, to the COR, Mr. Mike Kirk at Bldg. 667A, West Point NY 10996, documenting all work performed on the components of the South Dock, Pine Ridge Rappel site, Stillwell safety line and the Camp Buckner Slide for Life and Confidence Climb.

H. Identify all deficiencies found, corrective measures taken, replacement parts required, quantities and quality of lubricants utilized. Same shall be submitted within 30 days upon completion of services.

I. Insure Rappelling Tower, Pine Ridge Rappel site, Stillwell safety line and Slide for Life and Confidence Climb to be in full and safe working order.

J. Provide all parts necessary to accomplish maintenance and repairs as identified as follows in the performance section.

K. Be ANSI certified to install and inspect structural support cables, testing of rappelling supports and anchor points.

L. Inspection and certification of all wire ropes specified in the performance section shall be performed by a certified wire rope inspector and/or certified engineer. The Contractor shall provide proof of certification within 5 calendar days to the Contracting Officer upon signing of contract.

M. Respond to emergency services as and when called for by the KO or COR and within 24 hrs of notification by same.

ATTACHMENT A

ATTACHMENT A

APPENDIX E

RAPPEL TOWER

INSPECTION

Use the rappel tower checklist to perform the yearly inspection, maintenance and testing program.

Submit a written report documenting all inspections, maintenance and testing on the rappel tower.

Rappel Tower

Inspection Checklist

YES NO Conditions Is the tower structurally sound?

Are all open areas (above 4 feet) protected with guardrails?

Are all guardrails a minimum of 42 inches high and capable of withstanding a side force of 200 pounds?

Are toe boards installed in all areas where personnel could pass underneath?

Do all stairs/fixed ladders comply with Occupational Safety and Health Administration standards?

Do all tower rope stations have 3 anchor points each?

Have all rappel rope anchor points been load tested and certified to 400 pounds static load each?

Have all fast rope anchor points been tested and certified to 400 pounds static load each, per person on the rope?

Are all anchor points in good condition and free of corrosion, sharp edges, burrs, etc.?

Is the tower deck free of trip/slip hazards (e.g., water, protruding nails/bolts, and splinters)?

Are the rappel wall face and the fast rope area free of protrusions and broken or loose boards?

Do the tower deck and the stairway tread have a nonskid surface?

Is there padding on all edges that rope and/or personnel cross?

Is the edge padding in good condition and securely fastened?

Are there any signs of insect infestation?

Is the landing area free of obstructions and hazards?

Are all structural areas of the tower that a rappeller might contact during rappel/fast rope operations properly padded?

Is all structural padding in good condition and securely fastened?

Are all areas that pose a trip hazard marked in yellow?

Are the tower platform and all rappel rope stations accessible without having to climb over any obstacles

(e.g., guardrails, support cables)?

Are there any signs or visible broken support boards or cross members?

Are guy wires (wire rope) installed at correct angle in relation to tower, secured to platform and at the proper tensile strength?

Are guy wires (wire rope) protected with a plastic coating and do the turnbuckles have protective covers installed?

Can the rappel tower be locked to deny access?

PERFORMANCE REQUIREMENTS SUMMA

PERFORMANCE REQUIREMENTS SUMMARY (PRS)

Preventative Maintenance on Rappelling Towers/Slide for Life/Climbing Cargo Net.

Performance Objective (from PWS Section 5)

Performance Standard Acceptable Quality Level Method of Surveillance Incentive / Disincentive

Work description, procedures and compliance

SOW, SEC. I., II.E.

III, III. Additional work section of contract

Work is to be performed IAW with all federal, state, and local regulations to include Attachment A of the contract and current ANSI Standards, TRADOC 385‐1 and NYS Industrial Code Rule 32.

Reports are to be submitted as per the SOW or payment may be withheld.

Periodic Inspection and customer feedback.

Contractor may not be paid in full until the customer and COR are in agreement that all aspects of the

SOW

requirements are met.

Trained and competent personnel.

Sections I., II.E, II.K. & L., III.B.3., Work shall be performed by Competent persons – qualified and trained in all phases of equipment maintenance, inspection and repair. Must be Qualified as a wire rope inspector

100% ‐ Contractor is required to meet the expected performance standards with no allowable errors

Periodic inspection and customer feedback.

100% completion of this task is necessary for personal safety

Personnel Protection Equipment and procedures.

Contractor shall insure all proper PPE is utilized and proper procedures are followed. IAW

OSHA 29 CFR

1926, ANSI, EM

385‐1‐1

Zero defects during each period of performance.

Direct observation performed periodically or through 100% surveillance.

Periodic inspections.

100% completion of this task is necessary for personal safety

Performance Objective (from PWS Section 5)

Performance Standard Acceptable Quality Level Method of Surveillance Incentive / Disincentive

Control Barriers – section II a.

Proper barriers must be in place to prevent property and facility damage.

Shall be submitted as per the SOW requirements.

Contractor is expected to meet the standards of the Service requirements.

Periodic Inspection, review of contractor reports & Customer Feedback

Non‐conforming performance documentation may be considered a failure to successfully meet the terms of the contract

Reporting – section II f.

Contractor shall provide written report documenting all work inspected and performed on all equipment as stated in contract.

Shall be submitted as per the SOW requirements.

Contractor is expected to meet the standards of the Service requirements.

Periodic Inspection, review of contractor reports & Customer Feedback

May not invoice for work that is not complaint.

Non‐conforming performance documentation may be considered a failure to successfully meet the terms of the contract

Safety and Health Contractor shall insure work is performed IAW

EM 385‐1‐1,

ANSI.OSHA 29,

and CFR 1926. All local, state & federal regulations.

Zero defects during each period of performance.

Direct observation performed periodically or through 100% surveillance.

Periodic inspections.

100% completion of this task is necessary for personal safety

Install Cargo Climbing Net Camp Buckner – Equipment & supplies. Section G

Contractor shall ensure equipment and supplies are as per the SOW.

Section G100%

100% Contractor is required to meet the expected performance standards with no allowable errors due to safety.

Periodic inspections and customer feedback.

100% completion of this task is necessary for personal safety.

Non‐conforming performance documentation may be considered a failure to successfully meet the terms of the contract.

Installment Guarantee of Climbing Net.

As per the SOW (section G) and

TRADOC PAM

385‐1 standards.

100% Contractor is required to meet the expected performance standards with no allowable errors due to safety.

Direct observation performed periodically or through 100% surveillance.

Periodic inspections

100% completion of this task is necessary for personal safety.

Non‐conforming performance documentation may be considered a failure to successfully meet the terms of the contract.

Emergency Response.

Section II.M.

Contractor shall respond to emergencies within 24 hours once notified

The Contractor shall be able to respond within twenty four (24) hours of verbal notification from authorized individuals when required.

Services shall be provided as & when called for during a 24 hour period, seven (7) days a week, including Federal Holidays.

100% response will be evaluated at each occurrence.

‐Customer feedback will be documented.

May not invoice for work that is not complaint.

Failure to meet requirement on three occasions may be considered a failure to successfully meet the terms of the contract and require disciplinary actions.

WAGE GRADE DETERMINATION

1/31/2020 beta.SAM.gov

"REGISTER OF WAGE DETERMINATIONS UNDER I U.S. DEPARTMENT OF THE

SERVICE CONTRACT ACT ] EMPLOYMENT STANDARDS ADMINISTRATION

LABOR

By direction of the Secretary of Labor I I I I I

WAGE AND HOUR DIVISION WASHINGTON D.C. 20210

Daniel W. Simms Director

I Wage Determination No.: 2015-4159 Division of I Revision No.: 11

Wage DeterminationsI Date Of Last Revision: 12/23/2019

;Nco-t-e;:--U-n-d-e-r-:E=xecc-u:t-i-v-e,--O-r-d-e;r--(,E-O-;)c=----;:c::-c---:=,;;---1,:-s:-=,-,----:-==--------wage of $10.-80 for calendar year 2020 applies to all contracts subject to the ·Service Contract Act for which the contract is awarded (.and any solicitation was issued) on or after January l 2015. If this contract is covered by the ED the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The ED minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the ED is available at www.dol.gov/whd/govcontracts.

State: New York

Area: New York County of Orange

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011

01262 01263 01270 01290 01300

Accounting Clerk I

Personnel Assistant (Employment) II Personnel Ass stant {Employment) III Production Control Clerk Rental Clerk Scheduler Maintenance

18.13 20.36 22.77

13658 an hourly minimum

34.80 31.68 15.33 17.24 18.82 16.51 18.02 24.39 15.86 '15.86 14.80 17.49 18.82 26.92 14.61 15.19 17.67 18.96 21..22 23.66 25.27 18.04 21.57

01012 Accounting Clerk. II 01013 Accounting Clerk III 01020 Administrative Assistant 01035 Court Reporter 01041 Customer Service Representative I 01042 Customer Service Representative II 01043 Customer Service Representative III 01051 Data Entry Operator I 01052 Data Entry Operator II 01060 Dispatcher Motor Vehicle 01070 Document Preparation Clerk 01090 Duplicating Machine Operator 01111 General Clerk I 01112 General Clerk II 01113 General Clerk III 01120 Housing Referral -Assistant 01141 Messenger Courier 01191 Order Clerk I 01192 Order Clerk II 01261 Personnel Assistant (Employment) I https:l/bela.sam.gov/wage-determinalion/2015-4159111?keywords=2015-4159&sort=-relevance&lndex::&ls_active=true&page=1 1/12

1/31/2020 beta.SAM.gov

01410 01420 01460 01531 01532 01533 01611 01612

Supply Technician Survey Worker Switchboard Operator/Receptionist Travel Clerk I Travel Clerk II Travel Clerk III Word Processor I Word Processor

II

01311 Secretary I 21.57 01312 Secretary II 24.14 01313 Secretary III 26.92 01320 Service Order Dispatcher 21.75

34.80 21.64 16.30 16.82 18.10 19.65 17.87 20.07

01613 Word Processor III 05000 - Automotive Service Occupations 05005 Automobile Body Repairer Fiberglass

22,44

23.05

05070 05110 05130 05160 05190 0522'0 05250 05280 05310 05340 05370 05400

07000 - 07010 07041 07042 07070 07130 07210 07260

09000 - 09010 09040 09080 09090 09110 09130

Automotive Worker Mobile Equipment Servicer Motor Equipment Metal Mechanic Motor Equipment Metal Worker Motor Vehicle Mechanic Motor Vehicle Mechanic Helper Motor Vehicle Upholstery Worker Motor Vehicle Wrecker Painter Automotive Radiator Repair Specialist Tire Repairer Transmission Repair Specialist

Food Preparation And Service Occupations Baker Cook I Cook II Dishwasher Food Service Worker Meat Cutter Waiter/Waitress

Furniture Maintenance And Repair Occupations Electrostatic Spray Painter Furniture Handler Furniture Refinisher Furniture Refinisher Helper Furniture Repairer Minor Upholsterer

05010 Automotive Electrician 26.09 05040 Automotive Glass Installer 24.15

24.15 20.57 26.94 24.15 26.94 19.94 21.07 24.15 25.66 24.15 13.40 26,94

15.40' 16.64 18.58 11.65 12.49 19.20 12.85

16.89 13.27 18.79 15.19 17.10 18.39

11000 - General Services And Support Occupations

11030 1106,0 11090 11122 11150

Cleaner Vehicles Elevator Operator Gardener Housekeeping Aide Janitor

13.04 15.70 19.05

11210 Laborer Grounds Maintenance 11240 Maid or Houseman 11260 Pruner 11270 Tractor Operator 11330 Trail Maintenance Worker

15.89 15.30 14.55 19.07 15.89

11360 Window Cleaner 16.68 2000 - Health Occupations

12010 Ambulance Driver 20.22 12011 Breath Alcohol Technician 24.22 12012 Certified Occupational Therapist Assistant 31.45 12015 Certified Physical Therapist Assistant 29.66 12020 Dental Assistant 19.00 12025 Dental Hygienist 43.07

12030 12035

EKG Technician Electroneurodiagnostic Technologist

33.26 33.26 htlps;//beta.sam.gov/wage-determinatlon/2015-4159/11?keywords=2015•4159&sort=-relevance&lndex=&ls_active=tnie&page=1 2112

13000 13011 13012 13013 13041 13042 13043

12040 Emergency Medical Technician 20.22 12071 Licensed Practical Nurse I 21.76 12072 Licensed Practical Nurse II 24.34 12073 Licensed Practical Nurse III 27.00 12100 Medical Assistant 17.79 12130 Medical Laboratory Technician 30.00 12160 Medical Record Clerk 20.40 12190 Medical Record Technician 22.81 12195 Medical Transcriptionist 21.99 12210 Nuclear Medicine Technologist 44,71 12221 Nursing Assistant I 12.68 12222 Nursing Assistant II 14.26 12223 Nursing Assistant III 20.01 12224 Nursing Assistant IV 17.48 12235 Optical Dispenser 28.70 12236 Optical Technician 18.46 12250 Pharmacy Technician 15.83 12280 Phlebotomist 19.84 12305 Radiologic Technologist 34.97 12311 Registered Nurse I 32.76 12312 Registered Nurse II 38.41 12313 Registered Nurse II Specialist 38.41 12314 Registered Nurse III 49.39 12315 Registered Nurse III Anesthetist 49.39 12316 Registered Nurse IV 59.22 12317 Scheduler (Drug and Alcohol Testing) 30.00 12320 Substance Abuse Treatment Counselor 25.67

Information And Arts Occupations Exhibits Specialist I Exhibits Specialist II Exhibits Specialist III Illustrator I Illustrator II Illustrator III

27.03 30.45 34.25 25.89 30.45 35.50

13047 Librarian 13050 Library Aide/Clerk 13054 Library Information Technology Systems Administrator 13058 Library Technician 13061 Media Specialist I 13062 Media Specialist II 13063 Media Specialist III 13071 Photographer I 13072 Photographer II 13073 Photographer III 13074 Photographer IV 13075 Photographer V 13090 Technical Order Library Clerk

34.02 15.79 25.15

21.67 21.21 23.84 26.70 20.03 23.82 29.53 33.78 40.89 19.75

14044 Computer Operator IV 14045 Computer Operator V 14071 Computer Programmer I 14072 Computer Programmer II 14073 Computer Programmer III 14074 Computer Programmer IV 14101 Computer Systems Analyst I 14102 Computer Systems Analyst II 14103 Computer Systems Analyst III 14150 Peripheral Equipment Operator 14160 Personal computer Support Technician 14170 System Support Specialist

13110 Video Teleconference Technician 26.76 14000 - Information Technology Occupations

14041 Computer Operator I 19.00 14042 Computer Operator II 21.26 14043 Computer Operator III 23.71

26.35 29.17

(see 1) 27.56 (see 1) (see 1)

(see 1)

19.00 26.35 39.46 https://beta.sam.gov/wage-determination/2015-4159/11?keywords,,2015-4159&sort-=-relevance&index=&is_aclive=true&page,,1 3/12

1/31/2020

15000

Instructional Occupations

15010 Aircrew Training Devices Instructor (Nbn-Rated) 39.54 15020 Aircrew Training Devices Instructor (Rated) 43.75 15030 Air Crew Training Devices Instructor (Pilot) 51.99 15050 Computer Based Training Specialist/ Instructor 39.54 15060 Educational Technologist 32.92 15070 Flight Instructor (Pilot) 51.99 15080 Graphic Artist 30.17 15085 Maintenance Test Pilot Fixed Jet/Prop 51.99 15086 Maintenance Test Pilot Rotary Wing 51.99 15088 Non-Maintenance Test/Co-Pilot 51.99 15090 Technical Instructor 27.59 15095 Technical Instructor/Course Developer 33.74 15110 Test Proctor 22.27 15120 Tutor 22.27

16000 - Laundry Dry-Cleaning Pressing And Related Occupations

16010 Assembler 14.34 16030 Counter Attendant 14.34 16040 Dry Cleaner 16.61 16070 Finisher Flatwork Machine 14.34 16090 Presser Hand 14.34 16110 Presser Machine Drycleaning 14.34

16130 Presser Machine Shirts 16160 Presser Machine Wearing Apparel Laundry 16190 Sewing Machine Operator 16220 Tailor 16250 Washer Machine

19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 19040 - Tool And Die Maker

21000 - Materials Handling And Packing Occupations

14.34

14.34 17.30 18.15 15.22

24.01 27.83

21020 Forklift Operator 17.56 21030 Material Coordinator 25.27 21040 Material Expediter 25.27 21050 Material Handling Laborer 14.24

21071 Order Filler 21080 Production Line Worker {Food Processing) 21110 Shipping Packer 21130 Shipping/Receiving Clerk 21140 Store Worker I 21150 Stock Clerk

12.98 17.56 16.43 16.43 16.85 21.37

21210 Tools And Parts Attendant 17.56 21410 Warehouse Specialist 17.56

23000 - Mechanics And Maintenance And Repair Occupations

23010 Aerospace Structural Welder 35.35 23019 Aircraft Logs and RecOrds Technician 29,79 23021 Aircraft Mechanic I 34.02 23022 Aircraft Mechanic II 35.35 23023 Aircraft Mechanic III 36.67 23040 23050

Aircraft Aircraft

Mechanic Helper Painter

26.47 32.74

23060 Aircraft Servicer 29.79 23070 Aircraft Survival Flight Equipment Technician 32.74 23080 Aircraft Worker 31.39 23091 Aircrew Life Support Equipment (ALSE) Mechanic 31.39 I

23092 Aircrew Life Support Equipment (ALSE) Mechanic 34.02

II

23110 Appliance Mechanic 21.20 23120 Bicycle Repairer 14.67 23125 Cable Splicer 41.11 23130 Carpenter Maintenance 29.86 23140 Carpet Layer 27.98 23160 23181

Electrician Maintenance Electronics Technician Maintenance I

40.52 28.12 https:/lbela.sam.gov/wageꞏdelerminalion/2015-4159/11?keywords=2015-4159&sorl=•relevance&index=&is_aclive=true&page=1 4/12

23410 Heating Ventilation And Air-Conditioning Mechanic, 23411 - Heating Ventilation And Air Contidioning Mechanic (Research Facility) 23430 Heavy Equipment Mechanic

23182 Electronics Technician Maintenance II 29.32 23183 Electronics Technician Maintenance III 30.47 23260 Fabric Worker 30.20 23290 Fire Alarm System Mechanic 25.85 23310 Fire Extinguisher Repairer 26.58 23311 Fuel Distribution System Mechanic 37.89 23312 Fuel Distribution System Operator 31.32 23370 General Maintenance Worker 21.80 23380 Ground Support Equipment Mechanic 34.02 23381 Ground Support Equipment Servicer 29.79 23382 Ground Support Equipment Worker 31.39 23391 Gunsmith I 26.58 23392 Gunsmith II 29.68 23393 Gunsmith III 32.17

29.77

30.93

30.12

23593 23640 23710 23760 23790 23810 23820

Metrology Technician III Millwright Office Appliance Repairer Painter Maintenance Pipefitter Maintenance Plumber Maintenance Pneudraulic Systems Mechanic

23440 Heavy Equipment Operator 41.98 23460 Instrument Mechanic 31.98 23465 Laboratory/Shelter Mechanic 30,96 23470 Laborer 13.43 23510 Locksmith 22.77 23530 Machinery Maintenance Mechanic 28.35 23550 Machinist Maintenance 23.16 23580 Maintenance Trades Helper 16.63 23591 Metrology Technician I 31.98 23592 Metrology Technician II 33.24

34.64 37.56 21.80

22.99 32.76 31.53 32.17

23890 23910 23931 23932 23950 23960 23965 23970 23980

23850 Rigger 31.26 23870 Scale Mechanic 29.68

Sheet-Metal Worker Maintenance Small Engine Mechanic Telecommunications Mechanic I Telecommunications Mechanic II Telephone Lineman Welder Combination Maintenance Well Driller Woodcraft Worker Woodworker

32.41 22.05 33,56 34.87 42.24

22.57 29.49 32.17 22.81

24000 - Personal Needs Occupations

24550 24570 24580 24610

Case Manager Child Care Attendant Child Care Center Clerk Chore Aide

17.28 13.60 16,97 12.57

24620 Family Readiness And Support Services Coordinator 24630 - Homemaker

25000 - Plant And System Operations Occupations 25010 Boiler Tender

17.28

19.80

38.63

25040 sewage Plant Operator 32.78 25070 Stationary Engineer 38.63 25190 Ventilation Equipment Tender 29.02 25210 Water Treatment Plant Operator 32.78

27000 - Protective Service Occupations 27004 Alarm Monitor 27007 - Baggage Inspector 27008 - Corrections Officer

22.30 17.16 34.54 https://bela.sam.gov/wage-determlnation/2015-4159/11?keywords=2015-4159&sort=-relevance&index=&ls_active=true&page:1 5/12

27010 Court Security Officer 37.35 27030 Detection Dog Handler 20.36 27040 Detention Officer 34.54 27070 Firefighter 40.21 27101 Guard I 17.16 27102 Guard II 20.36 27131 Police Officer I 35.68 27132 Police Officer II 39.64

28000 - 28041

Recreation Occupations Carnival Equipment Operator

14.01

28690 Swimming Pool Ope·rator

28042 Carnival Equipment Repairer 14.88 28043 Carnival Worker 11.37 28210 Gate Attendant/Gate Tender 17.91 28310 Lifeguard 13.00 28350 Park Attendant (Aide) 20.04 28510 Recreation Aide/Health Facility Attendant 15.76 28515 Recreation Specialist 24.82 28630 Sports Official 15.95

16.95

29000 - Stevedoring/Longshoremen Occupational services

29030 29041 29042

Line Handler Stevedore I Stevedore II

29010 Blocker And Bracer 34,61 29020 Hatch Tender 34.61

34,61 29.41 30.96

30000 - Technical Occupations

30012 Air Traffic Control Specialist Terminal (HFO) (see 2) 30021 Archeological Technician I 30022 Archeological Technician II 30023 Archeological Technician III 30030 Cartographic Technician 30040 Civil Engineering Technician 30051 Cryogenic Technician I 30052 Cryogenic Technician II 30061 Drafter/CAD Operator I 30062 Drafter/CAD Operator II 30063 Drafter/CAD Operator III 30064 Drafter/CAD Operator IV 30081 Engineering Technician I 30082 Engineering Technician II 30083 Engineering Technician III 30084 Engineering Technician IV 30085 Engineering Technician V 30086 Engineering Technician VI 30090 Environmental Technician 30095 Evidence Control Specialist

30010 Air Traffic Control Specialist Center (HFO) (Sl;!e 2) 44.61 30011 Air Traffic Control Specialist Station (HFO) (see 2) 30.77

33.87 19.69 22.02 27.27 27.27 29.82 28.67 31.66 19.69 22.02 24.55 28.67 19.62 22.47 25.28

31.22 39.40 43.34 25.12 25.89

30210 Laboratory Technician 23.86 30221 Latent Fingerprint Technician I 29.77 30222 Latent Fingerprint Technician II 32.88 30240 Mathematical Technician 31.79 30361 Paralegal/Legal Assistant I 21.94 30362 Paralegal/Legal Assistant II 27.17 30363 Paralegal/Legal Assistant III 35.39 30364 Paralegal/Legal Assistant IV 40.21 30375 Petroleum Supply Specialist 31.66 30390 Photo-Optics Technician 27.27 30395 Radiation Control Technician 31.66 30461 Technical Writer I 28.45 30462 Technical Writer II 34.80 30463 Technical Writer III 42.11 30491 Unexploded Ordnance (UXO) Technician I 28.35 30492 Unexploded Ordnance (UXO) Technician II 34.30 30493 - Unexploded ordnance (UXO) Technician III 41.12 https://beta.sam.govfwage-determlnatlon/20154159/11?keywords,,2015-4159&sort-=-relevance&lndex,,&is_active,,true&page=1 6/12

31364 Truckdriver Tractor-Trailer 99000 - Miscellaneous Occupations 99020 Cabin Safety Specialist

30494 Unexploded (UXO) Safety Escort 28.35 30495 unexploded (uxo) sweep Personnel 28.35 30501 Weather Forecaster I 28.67 30502 Weather Forecaster II 34.87 30620 Weather Observer Combined Upper Air Or (see 2) 24.55 Surface Programs

30621 Weather Observer Senior (see 2) 27.27 31000 - Transportation/Mobile Equipment Operation Occupations

31010 Airplane Pilot 34.30 31020 Bus Aide 22.17 31030 Bus Driver 28.74 31043 Driver Courier 16.45 31260 Parking and Lot Attendant 11.83 31290 Shuttle Bus Driver 17.80 31310 Taxi Driver 14.58 31361 Truckdriver Light 17,80 31362 Truckdriver Medium 19,15

31363 Truckdriver He.avy 24.52 24.52

16.73

99711 Recycling Specialist 99730 Refuse Collector 99810 Sales Clerk

99030 Cashier 11.32 99050 Desk Clerk 15.25 99095 Embalmer 35.95 99130 Flight Follower 28,35 99251 Laboratory Animal Caretaker I 14.97 99252 Laboratory Animal Caretaker II 15.91 99260 Marketing Analyst 36.06 99310 Mortician 35.95 99410 Pest Controller 18.80 99510 Photofinishing Worker 17.65 99710 Recycling Laborer 26.53

31.45 26.88 14.70

99831 Surveying Aide 99832 Surveying Technician 99840 Vending Machine Attendant 99841 Vending Machine Repairer 99842 - Vending Machine Repairer Helper

99820 School Crossing Guard 17.67 99830 Survey Party Chief 27.97

18.27 25.32 17.67 22.90 19.09

Note: Executive Order {EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year, Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the Victim of domestic violence sexual assault or stalking.

Additional information on contractor requirements and worker protections under the EO is a_vailable at www.dol.gov/whd/govcontracts, https:/lbela.sam.govfwage-determlnallon/2015-4159/11?keywords=2015-4159&sort=-re!evance&index=&is_active=true&page=1 7112

1131/2020 beta.SAM.gov

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA covered, contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors.

A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706, VACATION: 2 weeks paid vacation after l year of serv.ice with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor Or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.17l)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr's Birthday Washington's Birthday Good Friday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage https:l/beta.sam.gov/wage-determinalion/2015-4159/117keywords=2015-4159&sort=-relevance&index=&is_aclive=true&page=1 8/12

1/31/2020 determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4). A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY &

SUNDAY PAV: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed {40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your·rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on .Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAV DIFFERENTIAL**

An 8 percent d_ifferential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sen·sitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and inc.endiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

hltps:/lbeta.sam.gov/wage-determination/2015-4159/11?keywords=2015-4159&solr--re!evance&indEix=&is_active'91"ue&page=1 9/12

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all…