W911SA-12-R-0054_final_solicitation.docx

Section SF 30 - BLOCK 14 CONTINUATION PAGE

SUPPLEMENTAL INFORMATION

FY13 funds are presently not available for this solicitation and resultant contract. Notice of availability will be provided by contract modification.

1) Non-Personal Service to provide all labor, transportation, equipment, materials, supervision and other items or services necessary to perform snow removal services at the facilities listed below; in accordance with the performance work statement and the terms and conditions of the solicitation and resultant contract. The contractor will furnish all supplies necessary to fulfill the Performance Work Statement. The period of performance is 1-Nov-12 (or subsequent date) through 31-Oct-13 with four (4) one year options.

IA009 – 3440 North Division Street, Davenport, IA 52806 IA010 – 404 West Heivly Street, Decorah, IA 52101 IA018 – 1913 S Riverside Drive, Iowa City, IA 52246 IA027 – 1411 N Marion Ave, Washington, IA 52353 IA030 – 1689 Burton Ave, Waterloo, IA 50703 IA047 – 5502 Nordic Drive, Cedar Falls, IA 50613

2) In accordance with Local Clause 5152.209-4000, each contractor employee requiring access to a Federally-controlled installation, facility and/or Federally-controlled information system(s) shall complete Level I AT Awareness Training on an annual basis and receive a certificate of completion. The training is accessible from any computer and is available at https://atlevel1.dtic.mil/at/ <https://atlevel1.dtic.mil/at/> . The contractor is responsible for ensuring that all applicable employees have completed antiterrorism awareness training and shall certify that their workforce has completed the training through the submission of completion certificate(s) to the Contracting Officer and the Contracting Officer’s Representative (if appointed) within five working days after contract award or prior to access to a Federally-controlled installation or information system.

3) ALL DISCOURSE CONCERNING THIS SOLICITATION AND ITS REQUIREMENT SHALL BE DIRECTED TO THE FORT MCCOY CONTRACTING OFFICE. ANY REMARKS, EXPLANATIONS, OR ANSWERS PROVIDED BY ANY OTHER GOVERNMENT REPRESENTATIVE SHALL NOT CHANGE OR QUALIFY ANY OF THE TERMS OR CONDITIONS OF THE SOLICITATION. THE SOLICITATION SHALL ONLY BE CHANGED BY A WRITTEN AMENDMENT ISSUED BY THE FORT MCCOY CONTRACTING OFFICE.

4) SITE VISITS:

A site visits were scheduled for the each location according to the schedule through ASFI. Interested attendees were asked to meet at the facility. The POC for the site visit is Tara Campbell tara.l.campbell.12.civ@mail.mil

October 10:

1130 - IA009 Davenport 1400 - IA018 Iowa City 1600 - IA027 Washington

October 11:

0930 - IA047 Cedar Falls 1015 - IA030 Waterloo 1300 - IA010 Decorah

For Site Visit information, see Site Visit clause 52.237-1, unless you already have a permanent vehicle pass, you will be required to obtain a one-day vehicle pass. You will be required to present the following information: (1) vehicle registration, (2) valid driver’s license, (3) or car rental agreement (if applicable). Attendees at the pre-proposal conference/site visit are cautioned that the Government will not wait for anyone who is late or lost and will not hold another pre-proposal conference/site visit. Remarks, explanations and answers provided by Government representatives before, during and after the site visit shall not change or qualify any of the terms or conditions of the solicitation. The solicitation can only be changed by a formal written amendment issued by the Fort McCoy Contracting Office.

Written questions must be furnished to the Government no later than 19October 2012 at 4:00pm(CDT); in order to ensure a timely response is provided by the solicitation closing date. The POC for the site visit questions is Tara Campbell; tara.l.campbell.12.civ@mail.mil All questions are to be submitted in writing at the time indicated in the solicitation or they may not be addressed before solicitation closing date; therefore, offerors are advised to submit questions as soon as possible. Please provide your company name, telephone, point of contact, e-mail address, and solicitation number on all questions. The Government will respond to questions via the issuance of an amendment which incorporates the question and the Government’s response.

5) This procurement is set-aside for Small Business under the NAICS Code 561790 with a size standard of $7.0 Million.

6) ABILITYONE DESIGNATED ITEMS: In accordance with 52.208-9, contractors are referred to the web site of the Committee for Purchase from People Who Are Blind or Severely Disabled, the independent federal agency that administers the AbilityOne (formerly Javits-Wagner-O'Day or JWOD) Program for the lists of designated products and services http://www.abilityone.gov/procurement_list/index.html.

7) Proposals can be submitted in any of the following ways:

Submission through FBO Email: tara.l.campbell.12.civ@mail.mil Fax: 608-388-3950 Mail: Address identified in block 9 of the SF 1449

8) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers.

9) Contract Administrator: TBD at time of award. If you have questions pertaining to this contract after contract award (i.e. questions regarding delivery, invoice procedures, etc.), please request assistance from the Contract Administrator. Be sure to include the contract number in your request for assistance. Requesting contract administration assistance from any other individual could result in a delayed response.

10) Contracting Officer: TBD at time of award.

11) Postaward Conference: In the event the Contracting Officer decides to conduct a Postaward Conference in accordance with DFARS 242.5, the successful offeror will be notified and will be required to attend. The Contracting Officer’s notification will include specific details regarding the date, time, and location of the conference, any need for attendance by subcontractors, and information regarding the items to be discussed.

12) Contracting Officer’s Representative (COR): To Be Determined at the time of Award.

13) DUNS NUMBER ______________________________.

14) TAXPAYER ID #______________________________.

15) In accordance with FAR 52.232-34(b) and 52.204-99 a contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

16) If an offer is based on a teaming/partnering relationship or a joint venture, the offeror shall provide, with the proposal, all required solicitation information for all parties including a copy of the teaming/partnering or joint venture agreement. The agreement shall include information, which identifies the responsibilities for each entity under this contract. The agreement shall demonstrate the relationship between firms and identify contractual relationships and authorities to bind each entity of the teaming/partnering or joint venture relationship.

17) The “Equal Employment Opportunity Is The Law” notice (poster) referenced in FAR Clause 52.222-26(b)(3), Equal Opportunity, is located at http://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf.

18) In accordance with FAR Clause 52.222-41(g), the contractor must notify each service employee working on this contract of the minimum wage and fringe benefits required to be paid pursuant to this contract, or shall post a copy of the wage determination and Department of Labor Form WH-1313 in a prominent place at the worksite. The applicable wage determination is incorporated into the contract. The WH-1313 poster is located at http://www.dol.gov/whd/regs/compliance/posters/sca.htm.

19) As part of price evaluation, the Government will evaluate its option to extend services (see FAR Clause 52.217-8) by adding six (6) months of the offeror's final option period price to the offeror's total price. Offerors are required only to price the base and option periods. Offerors shall not submit a price for the potential six month extension of services period. The Government may choose to exercise the Extension of Services at the end of any performance period (base or option periods), utilizing the rates of that performance period.

20) Under Executive Order 11701 and the Contracts Clause entitled “Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era and Other eligible Veterans” (September 2006)(FAR 52.222-35), all Federal contractors with contracts of $100,000 or more must list job openings with the appropriate State Employment Service Office.

If you have any questions about Executive Order 11701 or the Affirmative Action Program to encourage the hiring of veterans, please call the State Employment Office and ask for a Veteran’s Representative.

21) INFORMATION FOR EVALUATION

This section supplements clause 52.212-1 and 52.212-2 which is included elsewhere in this request for proposals. The Government intends to evaluate offer and award a contract without discussions. Therefore, the offeror’s initial offer should contain the offeror’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest and waive informalities and minor irregularities in offers received.

PRICE FACTOR:

Submission Instructions – Offerors shall submit a fully completed SF 1449, Pricing Schedule, or acceptable alternative as identified in 52.212-1 or elsewhere in the RFP.

The agreed upon items and quantities will be multiplied times their respective unit prices found in the RFP.

Evaluation – Price will not be assigned an adjectival rating; and will be evaluated to determine if the offerors proposed price is fair, reasonable, and balanced. The government may determine that an offer is unacceptable if prices are significantly unbalanced. Price shall be evaluated at estimated quantities multiplied times their respective unit price.

Unrealistically Low Prices: Unrealistically low proposed prices, initially or subsequently, may be grounds for eliminating a proposal from competition.

Unbalanced Pricing: Offerors are cautioned against submitting a proposal that contains unbalance pricing. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more contract line items is significantly over or understated as indicated by the application of cost or price analysis techniques. The Government shall analyze offers to determine whether they are unbalanced with respect to separately priced line items or subline items. Proposals that are determined to be unbalanced may be rejected if the contracting officer determines that the lack of balance poses an unacceptable risk to the Government.

22) CONTRACT MANPOWER REPORTING

The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the contractor will report all contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor is required to completely fill in all the information in the format using the following web address https://cmra.army.mil. The required information includes:

(1) Contracting Office, Contracting Officers, Contracting Officer’s Technical Representative;

(2) Contract number, including task and delivery order number;

(3) Beginning and ending dates covered by reporting period;

(4) Contractor name, address, phone number, e-mail address, identity of contractor employee entering data;

(5) Estimated direct labor hours (including subcontractors);

(6) Estimated direct labor dollars paid this reporting period (including subcontractors);

(7) Total payments (including subcontractors);

(8) Predominant Federal Service Code (FSC) reflecting services provided by contractor (and separate predominant FSC for each subcontractor if different);

(9) Estimated data collection costs;

(10) Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the Army Requiring Activity is responsible for providing the contractor with its UIC for the purposes of reporting this information);

(11) Locations where contractor and subcontractors perform work (specified by zip code in the United States and nearest city, country, when in an overseas location, using the standardized nomenclature provided on the website);

(12) Presence of deployment or contingency contract language; and

(13) Number of contractor and subcontractor employees deployed in theater this reporting period (per country.

As part of this submission, the contractor will also provide the estimated total cost (if any) incurred to comply with this reporting requirement. Reporting period will be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year. Contractors may use a direct XML data transfer to the database server or fill in the field on the website. The XML direct transfer is a format for transferring filed from a contractor’s systems to the secure website without the need for separate data entries for each required data element at the website. The specific formats for the XML direct transfer may be downloaded from the website. *

Note: Information from the secure website is considered to be proprietary in nature when the contract number and contractor identity are associated with direct labor hours and direct labor dollars. AT no time will any data be released to the public with the contractor name and contract number associated with the data.

23) ALTERNATE DISPUTES RESOLUTION: In furtherance of Federal policy and the Administrative Dispute Resolution Act of 1990 (ADR Act), Public Law 101-552 and FAR Clause 52.233-1, Subparagraph (d) (2) (1) (B) (2), the Contracting Officer will try to resolve all post award acquisition issues in controversy by mutual agreement of both parties. Interested parties are encouraged to use alternative dispute resolution procedures to the maximum extent practicable, in accordance with the authority and requirements of the ADR Act.

24) CONTRACT PERFORMANCE:

1. Purpose. IAW with FAR Subpart 42.1500 contractor past performance information (PPI) is relevant information for future source selection purposes regarding a contractor’s actions under previously awarded contracts. It includes, for example, the contractor's record of conforming to contract requirements and to standards of good workmanship; the contractor's record of forecasting and controlling costs; the contractor's adherence to contract schedules, including the administrative aspects of performance; the contractor's history of reasonable and cooperative behavior and commitment to customer satisfaction; and generally, the contractor's business-like concern for the interest of the customer. Contractor past performance information is one of the tools that support Army efforts to acquire best value and is used to evaluate performance risk in source selection. The feedback provided by the government to the contractor in collecting PPI, and the knowledge that PPI will be used in future source selection decisions, should result in improved performance and a greater contractor focus on customer satisfaction.

2. Assessment Period. Performance Assessment Reports (PAR) shall be prepared IAW AFARS Subpart 42 upon physical completion of the contract. If the period of performance will exceed 18 months, an “interim” assessment report shall be prepared at the completion of 12 months performance and annually thereafter until the contract is physically complete. An out-of-cycle or “addendum” report may be prepared if there is a need to record an extraordinary event prior to the next regularly scheduled evaluation or if it is necessary to report a meaningful occurrence during the period between physical completion of the contract and contract closeout. Additionally, addendum reports may be prepared to record contractor’s performance relative to contract closeout and other administrative requirements (e.g. final indirect cost proposals, technical data, etc.).

3. Completion Due Date. The government will complete the PAR within 60 days after the end of the assessment rating period.

4. Evaluators. The Contracting Officer and the Contracting Officer’s Representative will jointly complete the performance assessment.

5. Contracts Performance Elements. The contractor’s performance shall be assessed in accordance with elements and rating system set forth in AFARS Subpart 42.

6. Contractor Review. The Contracting Officer will furnish a copy of the PAR to the contractor requesting that the contractor submit comments, rebutting statements, or additional information to the Contracting Officer within 30 calendar days of receipt. Failure to respond within the designated timeframe will be taken as agreement with the assessment.

7. Contract Concurrence. Where a contractor concurs with, or takes no exception to a PAR, such report shall be considered final and releasable for use in source selection and other deliberative purposes.

8. Contractor Rebuttal. Where a contractor takes exception to a performance report, the Contracting Officer will review the contractor’s rebuttal or comments and make appropriate changes. If the Contracting Officer makes changes, the changed rating will be reflected in the narrative. The Contracting Officer will make all reasonable efforts to reconcile the report and the contractor’s comments. However, it is not necessary that they reach agreement on the report where such is clearly impracticable. The contractor’s rebuttal or comments shall be made part of the PAR.

9. Resolving Disagreements between the Government and the Contractor. In the event disagreements between the parties regarding the PAR occur, the Contracting Officer will review the rebuttal and make appropriate changes. If no agreement is reached, the PAR is forwarded to the Reviewing Official (Director of Contracting) along with the Contracting Officer’s Findings and Recommendation and supporting documentation. The decision of the Reviewing Official is final. Copies of the PAR and the contractor’s response and review comments, if any, shall be retained as part of the evaluation.

10. Release of Contractor Performance Evaluation Information. The evaluation will not be released to other than government personnel and the contractor whose performance is evaluated. The performance evaluation information will be input into the applicable module within Contractor Performance Assessment Reporting System (CPARS) database (or Government system in use at time of the evaluation).

11. Source Selection Information. Departments and agencies will electronically access the PAR information to support future award decisions.

25) REQUIRED INSURANCE:

In accordance with FAR clause 52.228-5 entitled, “Insurance--Work on a Government Installation” the following minimum amounts of insurance are required.

Within ten (10) calendar days after contract award, the Contractor shall certify to the Contracting Officer, in writing, that the required insurance has been obtained.

26) HOURS OF OPERATION:

a. The Contractor shall schedule his working hours to coincide with the working hours of the military reservation. The normal working hours are 7:30 AM thru 3:30 PM Monday through Friday excluding Federal Holidays.

Federal Holidays are as follows:

When a holiday falls on a Sunday, the following Monday will be observed as a holiday and when a holiday falls on a Saturday, the proceeding Friday is observed as a holiday by U.S. Government Agencies. Any other Congressional or Presidential imposed Federal Holiday.

b. If the Contractor for his convenience desires to perform work during other than normal working hours or on other than normal work days, or if the Contractor is required to perform work at such times, the Contractor shall reimburse the Government for any additional expense occasioned the Government, thereby, such as, but not limited to, overtime pay for Government Inspectors, utilities service, etc.

c. UNLESS otherwise specified in these provisions, services will be performed during normal duty hours.

d. When required services occur on holidays, work will be performed on either the previous or following work day, unless specified otherwise.

27) LEGAL COMPLIANCE: The Contractor shall comply with all Federal, State, and Local Laws, codes and regulations applicable to his performance under this contract, and shall be solely responsible for all costs associated with said compliance.

28) In accordance with FAR 52.222-42, the classes of service employees expected to be employed under the contract states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.

This Statement is for Information Only:

It is not a Wage Determination

31) ATTACHMENTS:

STATEMENT OF WORK

PERFORMANCE WORK STATEMENT

IA009, 3440 North Division St, Davenport, IA 52806 IA010, 404 West Heivly Street, Decorah, IA 52101 IA018, 1913 S Riverside Dr, Iowa City, IA 52246 IA027, 1411 N Marion Ave, Washington, IA 52353 IA030, 1689 Burton Ave, Waterloo, IA 50703 IA047, 5502 Nordic Dr, Cedar Falls, IA 50613

SNOW PLOWING AND REMOVAL, SALTING AND SANDING

U.S. ARMY RESERVE CENTERS

1.) SCOPE OF WORK: Furnish all supervision, labor, materials, supplies, and equipment necessary for salting/sanding, plowing, and snow removal from main roads, secondary roads, parking lots and sidewalks as ordered by Type 1, Type 2, Type 3, Type 4, Type 5, Type 6 on the snow plowing contract.

2.) GENERAL PROVISIONS:

Basic Services: The contractor shall remove snow and ice, including drifts or piles, from all roadways, parking lots, and sidewalks as shown on attached facility map(s). Multiple snow/ice removals may be required each day. When snowfall is heavy or accumulation becomes excessive, the contractor must place excess snow at accumulation points identified in attached facility maps. Contractor will begin work when appointed Contracting Officer’s Representative (COR) calls for snow plowing service. Snow plowing operations will begin within two (2) hours after notification from the COR. Contractor shall remain on the job until the work is completed to the satisfaction of the COR. Contractor must get a signed service ticket from (COR) to submit with invoice with date and time services were provided. If services are ordered during a heavy snow, and then again when the snow storm is over, it shall constitute two plowing orders. If services are ordered when snowfall has exceeded 6 inches, then that order shall constitute two plowing orders. At no time will the vendor charge more than two plowing’s during a single visit.

Snow Depths:

The following depths will be used to determine the number of plows to be billed based on the amount of snow which has fallen at the time service is rendered (see below for Scenarios).

· Scenario: You are called by the facility manager at 9:00 AM on Thursday to plow and the snow depth at that time is 5 inches, your plow quantity will be 1. You are then called back at 5:00 PM the same day and another 12 inches of snow has fallen, the plow quantity will be 2 plows based on the depth of snow that has fallen since the first plow.

· Scenario: You are called by the facility manager at 6:00AM on Wednesday to plow and the snow depth at that time is 10 inches, your plow quantity will be 2. You are then called back at 4:00PM the same day and another 3 inches of snow has fallen, the plow quantity will be 1 plow based on the depth of snow that has fallen since the first plow.

A. Service Tickets:

The contractor shall provide a 3-part (Original plus 2 copies) Service Ticket for each service call. The contractor will have a service ticket signed and dated by the designated Government representative upon satisfactory completion of each service call. A legible copy of the service ticket will be provided to the person signing the ticket.

The contractor shall ensure that the original copy of each service ticket for service performed during the billing period is attached to the informational copy of the monthly invoice. The informational copy of the invoice is to be submitted to the Facility Management Team for validation of services received during the billing period.

The contractor shall keep a legible copy of all service tickets for their records.

B. Invoices Invoices shall be submitted in accordance with the terms and conditions of the Contract documents.

C. Generally, services will be required during the hours of 6 A.M. through 5 P.M. However, the Contractor must be available to perform services twenty-four (24) hours a day, seven (7) days a week.

D. Contractor shall furnish the COR a list of telephone numbers where the Contractor or his authorized representative may be contacted, seven (7) days a week at any hour of the day or night.

E. Contractor must possess or have access to sufficient equipment to perform all services that may be ordered under this contract.

F. Snow plowing, Sidewalk Snow removal will normally be ordered at or near the end of a snowfall or, in a continuing , However, determination of when to order services rests solely with the COR, or his designated representative. The Contractor will be notified in writing, after contract award, who the COR is and shall not accept any orders from any unauthorized individuals.

G. Contractor shall perform spring clean up. Sweep sand and debris from parking lots/Sidewalks and remove from site.

H. Snow may not be piled up in any entrance to walkways.

3. TYPE 1 SNOW PLOWING:

A. Snow and ice will be plowed and cleared from roads, sidewalks and parking lots and MEP lots down to the bare surface as indicated on the drawings.

B. Snow plowing will be from curb to curb or the complete traveled way on all streets and drives.

C. Contractor will keep snow free of driveway serpentines and other security structures. Contractor shall understand that these security structures are reconfigured from time to time.

F. Contractor shall be required to keep all fire hydrants free of snow with a minimum 5 foot diameter and a clear pathway free of ice and snow to the hydrant.

G. Snow plowing will be done of the entire area as indicated on the drawings.

H. Contractor shall treat plowed and cleaned surfaces skid free by applying a contractor furnished sand, salt or approved chemical, (Salt/Sand mixture or Chemical treatment must comply with State and Local Department of Transportation Requirements). Sidewalks to be kept in slip free condition.

4. TYPE 2 SNOW PLOWING:

A. Snow and ice will be plowed and cleared from roads, sidewalks and parking lots down to the bare surface as indicated on the drawings.

B. Snow plowing will be from curb to curb or the complete traveled way on all streets and drives.

C. Contractor will keep snow free of driveway serpentines and other security structures. Contractor shall understand that these security structures are reconfigured from time to time.

D. All dumpsters will be cleared of snow so they may be serviced.

E. All major overhead doors will be cleared of snow so as to be serviceable.

F. Contractor shall be required to keep all fire hydrants free of snow with a minimum 5 foot diameter and a clear pathway free of ice and snow to the hydrant.

G. Snow plowing will be done of the entire area as indicated on the drawings.

H. Contractor shall treat plowed and cleaned surfaces skid free by applying a contractor furnished sand, salt or approved chemical, (Salt/Sand mixture or Chemical treatment must comply with State and Local Department of Transportation Requirements). Sidewalks to be kept in slip free condition.

5. TYPE 3 SNOW PLOWING (MEP LOTS):

A. When Military Equipment Parking (MEP) areas are to be plowed, the contractor will make arrangements with the Facility Manager to gain access at negotiated time. When plowing snow in the MEP, military vehicles should not, at any time, be blocked with snow. Snow should be cleared at entrances/exits of MEP lots. Piled snow should not interfere with the movement of military vehicles. If snow staging areas are not marked on the snow removal drawings, the Contractor should coordinate with the Facility Manager , for a place to stage snow. If there are pathways/walkways between the MEP lots and adjoining buildings, these areas should be cleared of snow and salted/sanded as needed.

6. TYPE 4 SNOW PLOWING (SIDEWALKS):

A. Snow and ice will be plowed and cleared from sidewalks down to the bare surface as indicated on the drawings.

B. Contractor shall treat cleaned surfaces skid free by applying a contractor furnished sand, salt or approved chemical, (Salt/Sand mixture or Chemical treatment must comply with State and Local Department of Transportation Requirements). Sidewalks to be kept in slip free condition.

C. Contractor shall use appropriate equipment to accomplish snow removal on sidewalks. Snow and ice will be removed from sidewalks down to the bare cement. Equipment used to remove Snow from sidewalks shall not damage adjacent grass or landscaping.

7. TYPE 5 SNOW PLOWING (SALTING AND SANDING):

A. Ice Storms: Contractor shall treat plowed and cleaned surfaces skid free by applying a contractor furnished sand, salt or approved chemical, (Salt/Sand mixture or Chemical treatment must comply with State and Local Department of Transportation Requirements). Sidewalks to be kept in slip free condition as indicated on the drawings.

B. Contractor shall be required to keep all fire hydrants free of snow with a minimum 5 foot diameter and a clear pathway free of ice and snow to the hydrant.

8. TYPE 6 SNOW REMOVAL OPERATIONS:

C. Snow will be moved from the designated areas to dumping sites within the Reserve Center as directed by the COR or as shown on the attached drawings if required.

D. Contractor may occasionally be required to remove snow from drifted areas. The scope of this operation will be designated by the COR.

E. Contractor shall be required to keep all Government-owned fire hydrants free of snow.

F. Snow removal will be to local designated areas located generally less than a ¼ of a mile from the removal site.

9. SALT/SAND DISTRIBUTION:

A. Contractor shall treat plowed and cleaned surfaces skid free by applying a contractor furnished sand, salt or approved chemical, of which the contractor is required to provide an MSDS (for chemical de-icing compounds) to the COR for review and approval prior to use. Salt/Sand mixture or Chemical treatment must comply with Federal, State, Local Department of Transportation Requirements, or Department of Defense whichever is more stringent. Chemicals must be an environmental friendly product to protect against harm to our resources, personnel and alleviate any possible compliance and storm water run-off issues. Sidewalks to be kept in slip free condition. Location of sidewalks is indicated on the drawings.

B. Salt/sand shall be distributed 100 feet before and 100 feet after intersections and any 90 degree curve. This shall be done with a salt spreader attachment mounted on dump truck.

10. SUPERVSION:

A. The Contractor shall provide proper supervision on all jobs without additional cost to the Government.

B. Contractor shall be cautious when snow removal is in progress to prevent any damage to the buildings, sidewalks, roads, fire hydrants, shrubs, signs, and other protrusions. The Contractor shall be held liable for any damage incurred to Government property during the performance of work. All locally prescribed safety regulations, laws, and practices shall be carefully observed in the performance of work. Contractor shall restore damaged property to its original condition. Said damages should be repaired within 30 days of occurrence or the first opportunity that weather permits.

MEASUREMENT TECHNIQUES

1. QUALITY CONTROL: Contractor will ensure that Quality Control procedures are employed to monitor the performance of this contract in accordance with all Federal, State and Local regulations.

2. QUALITY ASSURANCE: The Government will periodically evaluate performance by appointing a representative(s) to monitor performance. The Quality Assurance Evaluator will evaluate the Contractor’s performance through intermittent on-site inspections of the Contractor’s Quality Control Program and receipt of complaints from base personnel.

The Government may inspect each task as completed or increase the number of quality control inspections if called for by repeated failures discovered during quality control inspections or repeated customer complaints. Likewise, the government may decrease the number of quality control inspections if performance dictates. The Government may also receive and investigate complaints from various customers located on the installation.

The Contractor is responsible for initially validating customer complaints. However, the Quality Assurance Evaluator will make final determination of the validity of customer complaint(s) in cases of disagreement with customer(s).

3. EVALUATION CRITERIA: The Project Manager will meet with the Facility Manager (FM) prior to start of contract. However, meetings will be held whenever the FM notes deficiencies. A mutual effort will be made to resolve all problems identified. The Project Manager or designated representative shall meet with Government personnel designated by the Contracting Officer to discuss immediate problem areas. The Project Manager or a representative shall respond within 2 hours after notification of deficiencies.

WAGE DETERMINATION

** WAGE DETERMINATION **

FOR DAVENPORT FACILITY

WD 05-2176 (Rev.-15) was first posted on www.wdol.gov on 06/19/2012

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2176 Diane C. Koplewski Division of | Revision No.: 15 Director Wage Determinations| Date Of Revision: 06/13/2012 States: Illinois, Iowa

Area: Iowa Counties of Des Moines, Henry, Lee, Louisa, Muscatine, Scott Illinois Counties of Bureau, Carroll, Henderson, Henry, Jo Daviess, Mercer, Rock Island, Warren, Whiteside **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.43 01012 - Accounting Clerk II 17.85 01013 - Accounting Clerk III 21.24 01020 - Administrative Assistant 19.43 01040 - Court Reporter 19.13 01051 - Data Entry Operator I 11.60 01052 - Data Entry Operator II 16.71 01060 - Dispatcher, Motor Vehicle 14.89 01070 - Document Preparation Clerk 12.85 01090 - Duplicating Machine Operator 12.85 01111 - General Clerk I 11.10 01112 - General Clerk II 12.11 01113 - General Clerk III 14.50 01120 - Housing Referral Assistant 17.43 01141 - Messenger Courier 10.77 01191 - Order Clerk I 12.50 01192 - Order Clerk II 16.10 01261 - Personnel Assistant (Employment) I 13.56 01262 - Personnel Assistant (Employment) II 15.16 01263 - Personnel Assistant (Employment) III 16.91 01270 - Production Control Clerk 20.22 01280 - Receptionist 11.05 01290 - Rental Clerk 10.64 01300 - Scheduler, Maintenance 13.15 01311 - Secretary I 13.15 01312 - Secretary II 14.71 01313 - Secretary III 17.43 01320 - Service Order Dispatcher 14.86 01410 - Supply Technician 19.43 01420 - Survey Worker 13.09 01531 - Travel Clerk I 12.64 01532 - Travel Clerk II 13.66 01533 - Travel Clerk III 14.78 01611 - Word Processor I 11.89 01612 - Word Processor II 13.67 01613 - Word Processor III 15.29 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 18.83 05010 - Automotive Electrician 18.27 05040 - Automotive Glass Installer 17.62 05070 - Automotive Worker 17.62 05110 - Mobile Equipment Servicer 16.17 05130 - Motor Equipment Metal Mechanic 18.91 05160 - Motor Equipment Metal Worker 17.62 05190 - Motor Vehicle Mechanic 18.83 05220 - Motor Vehicle Mechanic Helper 15.60 05250 - Motor Vehicle Upholstery Worker 16.98 05280 - Motor Vehicle Wrecker 17.62 05310 - Painter, Automotive 17.90 05340 - Radiator Repair Specialist 17.62 05370 - Tire Repairer 14.88 05400 - Transmission Repair Specialist 18.48 07000 - Food Preparation And Service Occupations 07010 - Baker 12.48 07041 - Cook I 11.67 07042 - Cook II 12.48 07070 - Dishwasher 9.99 07130 - Food Service Worker 9.99 07210 - Meat Cutter 15.36 07260 - Waiter/Waitress 10.43 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 17.90 09040 - Furniture Handler 14.47 09080 - Furniture Refinisher 18.27 09090 - Furniture Refinisher Helper 15.92 09110 - Furniture Repairer, Minor 17.12 09130 - Upholsterer 18.27 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 9.77 11060 - Elevator Operator 10.67 11090 - Gardener 12.78 11122 - Housekeeping Aide 10.67 11150 - Janitor 10.67 11210 - Laborer, Grounds Maintenance 11.29 11240 - Maid or Houseman 9.11 11260 - Pruner 11.66 11270 - Tractor Operator 12.29 11330 - Trail Maintenance Worker 11.29 11360 - Window Cleaner 11.14 12000 - Health Occupations 12010 - Ambulance Driver 15.66 12011 - Breath Alcohol Technician 15.66 12012 - Certified Occupational Therapist Assistant 21.24 12015 - Certified Physical Therapist Assistant 21.24 12020 - Dental Assistant 14.69 12025 - Dental Hygienist 30.53 12030 - EKG Technician 23.32 12035 - Electroneurodiagnostic Technologist 23.32 12040 - Emergency Medical Technician 15.66 12071 - Licensed Practical Nurse I 14.65 12072 - Licensed Practical Nurse II 15.66 12073 - Licensed Practical Nurse III 16.87 12100 - Medical Assistant 13.06 12130 - Medical Laboratory Technician 16.83 12160 - Medical Record Clerk 11.85 12190 - Medical Record Technician 12.93 12195 - Medical Transcriptionist 16.02 12210 - Nuclear Medicine Technologist 33.83 12221 - Nursing Assistant I 9.79 12222 - Nursing Assistant II 11.11 12223 - Nursing Assistant III 12.12 12224 - Nursing Assistant IV 13.49 12235 - Optical Dispenser 14.30 12236 - Optical Technician 13.38 12250 - Pharmacy Technician 11.79 12280 - Phlebotomist 13.52 12305 - Radiologic Technologist 21.91 12311 - Registered Nurse I 22.29 12312 - Registered Nurse II 27.27 12313 - Registered Nurse II, Specialist 26.28 12314 - Registered Nurse III 32.99 12315 - Registered Nurse III, Anesthetist 31.82 12316 - Registered Nurse IV 39.53 12317 - Scheduler (Drug and Alcohol Testing) 19.06 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.48 13012 - Exhibits Specialist II 23.58 13013 - Exhibits Specialist III 27.60 13041 - Illustrator I 18.21 13042 - Illustrator II 22.91 13043 - Illustrator III 27.60 13047 - Librarian 24.98 13050 - Library Aide/Clerk 11.50 13054 - Library Information Technology Systems 22.56 Administrator 13058 - Library Technician 13.29 13061 - Media Specialist I 16.28 13062 - Media Specialist II 18.21 13063 - Media Specialist III 20.31 13071 - Photographer I 13.34 13072 - Photographer II 17.10 13073 - Photographer III 21.83 13074 - Photographer IV 26.69 13075 - Photographer V 28.08 13110 - Video Teleconference Technician 12.06 14000 - Information Technology Occupations 14041 - Computer Operator I 16.48 14042 - Computer Operator II 18.43 14043 - Computer Operator III 21.18 14044 - Computer Operator IV 24.24 14045 - Computer Operator V 26.85 14071 - Computer Programmer I (see 1) 20.59 14072 - Computer Programmer II (see 1) 26.66 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.48 14160 - Personal Computer Support Technician 24.24 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 25.84 15020 - Aircrew Training Devices Instructor (Rated) 34.10 15030 - Air Crew Training Devices Instructor (Pilot) 37.51 15050 - Computer Based Training Specialist / Instructor 22.55 15060 - Educational Technologist 26.08 15070 - Flight Instructor (Pilot) 37.51 15080 - Graphic Artist 20.42 15090 - Technical Instructor 17.36 15095 - Technical Instructor/Course Developer 21.23 15110 - Test Proctor 14.37 15120 - Tutor 14.37 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 8.94 16030 - Counter Attendant 8.94 16040 - Dry Cleaner 11.61 16070 - Finisher, Flatwork, Machine 8.94 16090 - Presser, Hand 8.94 16110 - Presser, Machine, Drycleaning 8.94 16130 - Presser, Machine, Shirts 8.94 16160 - Presser, Machine, Wearing Apparel, Laundry 8.94 16190 - Sewing Machine Operator 12.46 16220 - Tailor 13.33 16250 - Washer, Machine 9.87 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 20.29 19040 - Tool And Die Maker 23.91 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 16.18 21030 - Material Coordinator 20.22 21040 - Material Expediter 20.22 21050 - Material Handling Laborer 13.08 21071 - Order Filler 11.69 21080 - Production Line Worker (Food Processing) 16.18 21110 - Shipping Packer 14.48 21130 - Shipping/Receiving Clerk 14.48 21140 - Store Worker I 16.96 21150 - Stock Clerk 19.39 21210 - Tools And Parts Attendant 16.18 21410 - Warehouse Specialist 16.18 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 22.95 23021 - Aircraft Mechanic I 22.01 23022 - Aircraft Mechanic II 22.95 23023 - Aircraft Mechanic III 23.91 23040 - Aircraft Mechanic Helper 18.43 23050 - Aircraft, Painter 22.13 23060 - Aircraft Servicer 19.81 23080 - Aircraft Worker 20.51 23110 - Appliance Mechanic 18.76 23120 - Bicycle Repairer 16.37 23125 - Cable Splicer 28.42 23130 - Carpenter, Maintenance 21.59 23140 - Carpet Layer 18.26 23160 - Electrician, Maintenance 25.82 23181 - Electronics Technician Maintenance I 21.42 23182 - Electronics Technician Maintenance II 22.39 23183 - Electronics Technician Maintenance III 23.42 23260 - Fabric Worker 19.46 23290 - Fire Alarm System Mechanic 19.64 23310 - Fire Extinguisher Repairer 18.73 23311 - Fuel Distribution System Mechanic 23.58 23312 - Fuel Distribution System Operator 19.82 23370 - General Maintenance Worker 17.60 23380 - Ground Support Equipment Mechanic 22.01 23381 - Ground Support Equipment Servicer 19.81 23382 - Ground Support Equipment Worker 20.51 23391 - Gunsmith I 18.98 23392 - Gunsmith II 20.67 23393 - Gunsmith III 22.59 23410 - Heating, Ventilation And Air-Conditioning 20.67 Mechanic 23411 - Heating, Ventilation And Air Contditioning 21.90 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 20.30 23440 - Heavy Equipment Operator 28.17 23460 - Instrument Mechanic 23.63 23465 - Laboratory/Shelter Mechanic 21.04 23470 - Laborer 11.44 23510 - Locksmith 20.51 23530 - Machinery Maintenance Mechanic 21.53 23550 - Machinist, Maintenance 18.72 23580 - Maintenance Trades Helper 16.35 23591 - Metrology Technician I 23.63 23592 - Metrology Technician II 24.64 23593 - Metrology Technician III 25.65 23640 - Millwright 23.24 23710 - Office Appliance Repairer 19.62 23760 - Painter, Maintenance 18.64 23790 - Pipefitter, Maintenance 24.66 23810 - Plumber, Maintenance 22.82 23820 - Pneudraulic Systems Mechanic 22.30 23850 - Rigger 22.30 23870 - Scale Mechanic 20.40 23890 - Sheet-Metal Worker, Maintenance 23.06 23910 - Small Engine Mechanic 18.15 23931 - Telecommunications Mechanic I 25.05 23932 - Telecommunications Mechanic II 29.00 23950 - Telephone Lineman 27.64 23960 - Welder, Combination, Maintenance 18.91 23965 - Well Driller 21.48 23970 - Woodcraft Worker 22.30 23980 - Woodworker 18.73 24000 - Personal Needs Occupations 24570 - Child Care Attendant 9.74 24580 - Child Care Center Clerk 13.55 24610 - Chore Aide 10.02 24620 - Family Readiness And Support Services 12.80 Coordinator 24630 - Homemaker 13.51 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.87 25040 - Sewage Plant Operator 20.30 25070 - Stationary Engineer 25.87 25190 - Ventilation Equipment Tender 20.89 25210 - Water Treatment Plant Operator 20.30 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.39 27007 - Baggage Inspector 11.17 27008 - Corrections Officer 23.27 27010 - Court Security Officer 21.16 27030 - Detection Dog Handler 15.08 27040 - Detention Officer 23.27 27070 - Firefighter 17.91 27101 - Guard I 11.17 27102 - Guard II 15.08 27131 - Police Officer I 22.23 27132 - Police Officer II 24.70 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 10.71 28042 - Carnival Equipment Repairer 11.11 28043 - Carnival Equpment Worker 9.51 28210 - Gate Attendant/Gate Tender 13.69 28310 - Lifeguard 11.01 28350 - Park Attendant (Aide) 15.32 28510 - Recreation Aide/Health Facility Attendant 11.10 28515 - Recreation Specialist 16.35 28630 - Sports Official 12.20 28690 - Swimming Pool Operator 13.31 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 23.34 29020 - Hatch Tender 23.34 29030 - Line Handler 22.13 29041 - Stevedore I 22.27 29042 - Stevedore II 24.40 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 35.77 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 24.66 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.16 30021 - Archeological Technician I 18.88 30022 - Archeological Technician II 21.11 30023 - Archeological Technician III 26.16 30030 - Cartographic Technician 25.49 30040 - Civil Engineering Technician 23.42 30061 - Drafter/CAD Operator I 17.21 30062 - Drafter/CAD Operator II 20.58 30063 - Drafter/CAD Operator III 22.95 30064 - Drafter/CAD Operator IV 28.25 30081 - Engineering Technician I 18.52 30082 - Engineering Technician II 20.79 30083 - Engineering Technician III 23.25 30084 - Engineering Technician IV 28.85 30085 - Engineering Technician V 35.57 30086 - Engineering Technician VI 42.64 30090 - Environmental Technician 23.77 30210 - Laboratory Technician 21.58 30240 - Mathematical Technician 25.49 30361 - Paralegal/Legal Assistant I 16.09 30362 - Paralegal/Legal Assistant II 18.32 30363 - Paralegal/Legal Assistant III 21.73 30364 - Paralegal/Legal Assistant IV 26.28 30390 - Photo-Optics Technician 25.49 30461 - Technical Writer I 21.11 30462 - Technical Writer II 25.82 30463 - Technical Writer III 31.37 30491 - Unexploded Ordnance (UXO) Technician I 22.74 30492 - Unexploded Ordnance (UXO) Technician II 27.51 30493 - Unexploded Ordnance (UXO) Technician III 32.97 30494 - Unexploded (UXO) Safety Escort 22.74 30495 - Unexploded (UXO) Sweep Personnel 22.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 22.95 Surface Programs 30621 - Weather Observer, Senior (see 2) 25.49 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 10.37 31030 - Bus Driver 13.49 31043 - Driver Courier 12.48 31260 - Parking and Lot Attendant 10.44 31290 - Shuttle Bus Driver 13.26 31310 - Taxi Driver 10.70 31361 - Truckdriver, Light 12.98 31362 - Truckdriver, Medium 13.49 31363 - Truckdriver, Heavy 18.94 31364 - Truckdriver, Tractor-Trailer 18.94 99000 - Miscellaneous Occupations 99030 - Cashier 8.75 99050 - Desk Clerk 9.74 99095 - Embalmer 30.13 99251 - Laboratory Animal Caretaker I 9.18 99252 - Laboratory Animal Caretaker II 9.55 99310 - Mortician 31.54 99410 - Pest Controller 14.27 99510 - Photofinishing Worker 11.95 99710 - Recycling Laborer 16.15 99711 - Recycling Specialist 17.57 99730 - Refuse Collector 15.43 99810 - Sales Clerk 11.36 99820 - School Crossing Guard 11.44 99830 - Survey Party Chief 28.51 99831 - Surveying Aide 14.77 99832 - Surveying Technician 20.48 99840 - Vending Machine Attendant 12.90 99841 - Vending Machine Repairer 14.61 99842 - Vending Machine Repairer Helper 13.00

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: Life, accident, and health insurance plans, sick leave, pension plans, civic and personal leave, severance pay, and savings and thrift plans.

Minimum employer contributions costing an average of $3.71 average computed on the basis of all hours worked by service employees employed on the contract.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, 4 weeks after 15 years, and 5 weeks after 20 years.

Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of twelve paid holidays per year: New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Good Friday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, the Day before Christmas, and Christmas Day.