W911S7-18-Q-0014-U0002_Solicitation_Amendment.pdf

SEE ADDENDUM

(No Collect Calls)

W911S7-18-Q-0014 22-Feb-2018

b. TELEPHONE NUMBER

573-596-0131 EXT 6-4979

8. OFFER DUE DATE/LOCAL TIME

05:00 PM 12 Mar 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W911S79. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

VICTOR E. RICHARDS

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0011122525

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

MICC - FORT LEONARD WOOD

8112 NEBRASKA AVENUE

FORT LEONARD WOOD MO 65473

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W58G5R 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

HOMELAND DEFENSE CIVIL SUPPORT OFFICE

HOMELAND DEFENSE CIVIL SUPPORT OFFI

FLW WP BLDG 5415

FORT LEONARD WOOD, MO 65459 MO 65473

TEL: FAX:

5735960267FAX:

TEL: 5735960266 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

327331

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF70

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W911S7-18-Q-0014

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES ESTIMATED

QUANTITY

UNIT UNIT PRICE ESTIMATED AMOUNT

0001 5 Each Concrete Block, 4' X 4' X 4' (Base Year)

FFP

A 4’x4’x4’ concrete cube. All vertical and horizontal edges will have no less than4” and no greater than 6” angle iron approximately 10 gage thickness welded together to protect the edges and corners. ½” rebar will be placed in the concrete in a grid pattern, spaced approximately 10” apart and no closer than 4” from any edge. Each block would be approx. 2.37 cubic yards or approx. stacked on ground with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain USG property. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be reutilized on site if available howeverthe USG is not required to maintain on hand these materials. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 0 and 5 per year .

FOB: Destination

PURCHASE REQUEST NUMBER: 0011122525

PSC CD: 5620

ESTIMATED

NET AMT

UNIT UNIT PRICE ESTIMATED AMOUNT

0002 7 Each Concrete Block, 5' X 10' X 6" (Base)

FFP

. A 5’x10’x6” concrete slab. All vertical and horizontal edges will have no less than approximately 3 inch angle iron approximately 10 gage thickness welded together to protect all the edges and corners; this will have the effect of covering the edges which will work for this application. It will have ½” reinforcing rebar no closer than 4” from any edge, rebar spaced approximately 12” apart centered top to bottom of the 6 inch thickness. Each block is approx. .93 cu yards or approx.

3,720lbs per block. Concrete shall be flush with the outermost part of the angle iron frame. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. expect to purchae between 0 and 7 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

0003 270 Each Concrete Block, 42”x42”x4” (Base Year)

FFP

A 42”x42”x4” concrete slab; with ½” reinforcing rebar centered at 2 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be a industry standard approved lifting cable inserted into the concrete to create a lifting point 8”wide by 8” high outside the concrete creating a U-Shape. Each block is approx. .16 cu yards or approx. 640lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

0004 270 Each Concrete Block, 42”x42”x6” (Base Year)

FFP

A 42”x42”x6” concrete slab; with ½” reinforcing rebar centered at 3 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be an industry standard approved lifting cable type to create a lifting point 8” High by 8” wide outside the concrete creating a U-Shape. Each Block is approx. .27 cu yards and approx. 1,080lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

0005 48 Each Concrete Block, 5' X 10' X 8" (Base Yr)

FFP

A 5’x10’x8” concrete slab, with ½” reinforcing rebar centered at 4 inches and no closer than 4” from any edge, rebar spaced approximately 12” apart. Each block is approx. 1.25 cu yards and approx. 5,000lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.We expect to purchase between 8 and 48 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

1001 5 Each OPTION Concrete Block, 4' X 4' X 4' (1st Opt Y)

FFP

A 4’x4’x4’ concrete cube. All vertical and horizontal edges will have no less than4” and no greater than 6” angle iron approximately 10 gage thickness welded together to protect the edges and corners. ½” rebar will be placed in the concrete in a grid pattern, spaced approximately 10” apart and no closer than 4” from any edge. Each block would be approx. 2.37 cubic yards or approx. stacked on ground with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain USG property. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be reutilized on site if available howeverthe USG is not required to maintain on hand these materials. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 0 and 5 per year .

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

1002 7 Each OPTION Concrete Block, 5' X 10' X 6" (1st Opt)

FFP

. A 5’x10’x6” concrete slab. All vertical and horizontal edges will have no less than approximately 3 inch angle iron approximately 10 gage thickness welded together to protect all the edges and corners; this will have the effect of covering the edges which will work for this application. It will have ½” reinforcing rebar no closer than 4” from any edge, rebar spaced approximately 12” apart centered top to bottom of the 6 inch thickness. Each block is approx. .93 cu yards or approx.

3,720lbs per block. Concrete shall be flush with the outermost part of the angle iron frame. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. expect to purchae between 0 and 7 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

1003 270 Each OPTION Concrete Block, 42”x42”x4” (1st Option)

FFP

A 42”x42”x4” concrete slab; with ½” reinforcing rebar centered at 2 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be a industry standard approved lifting cable inserted into the concrete to create a lifting point 8”wide by 8” high outside the concrete creating a U-Shape. Each block is approx. .16 cu yards or approx. 640lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

1004 270 Each OPTION Concrete Block, 42”x42”x6” (1st option)

FFP

A 42”x42”x6” concrete slab; with ½” reinforcing rebar centered at 3 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be an industry standard approved lifting cable type to create a lifting point 8” High by 8” wide outside the concrete creating a U-Shape. Each Block is approx. .27 cu yards and approx. 1,080lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

1005 48 Each OPTION Concrete Block, 5' X 10' X 8" (1st Opt)

FFP

A 5’x10’x8” concrete slab, with ½” reinforcing rebar centered at 4 inches and no closer than 4” from any edge, rebar spaced approximately 12” apart. Each block is approx. 1.25 cu yards and approx. 5,000lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.We expect to purchase between 8 and 48 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

2001 5 Each OPTION Concrete Block, 4' X 4' X 4' (2nd Opt Y)

FFP

A 4’x4’x4’ concrete cube. All vertical and horizontal edges will have no less than4” and no greater than 6” angle iron approximately 10 gage thickness welded together to protect the edges and corners. ½” rebar will be placed in the concrete in a grid pattern, spaced approximately 10” apart and no closer than 4” from any edge. Each block would be approx. 2.37 cubic yards or approx. stacked on ground with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain USG property. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be reutilized on site if available howeverthe USG is not required to maintain on hand these materials. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 0 and 5 per year .

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

2002 7 Each OPTION Concrete Block, 5' X 10' X 6" (2nd Opt)

FFP

. A 5’x10’x6” concrete slab. All vertical and horizontal edges will have no less than approximately 3 inch angle iron approximately 10 gage thickness welded together to protect all the edges and corners; this will have the effect of covering the edges which will work for this application. It will have ½” reinforcing rebar no closer than 4” from any edge, rebar spaced approximately 12” apart centered top to bottom of the 6 inch thickness. Each block is approx. .93 cu yards or approx.

3,720lbs per block. Concrete shall be flush with the outermost part of the angle iron frame. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. expect to purchae between 0 and 7 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

2003 270 Each OPTION Concrete Block, 42”x42”x4” (2nd Option)

FFP

A 42”x42”x4” concrete slab; with ½” reinforcing rebar centered at 2 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be a industry standard approved lifting cable inserted into the concrete to create a lifting point 8”wide by 8” high outside the concrete creating a U-Shape. Each block is approx. .16 cu yards or approx. 640lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

2004 270 Each OPTION Concrete Block, 42”x42”x6” (2nd Option)

FFP

A 42”x42”x6” concrete slab; with ½” reinforcing rebar centered at 3 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be an industry standard approved lifting cable type to create a lifting point 8” High by 8” wide outside the concrete creating a U-Shape. Each Block is approx. .27 cu yards and approx. 1,080lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

2005 48 Each OPTION Concrete Block, 5' X 10' X 8" (2nd Opt)

FFP

A 5’x10’x8” concrete slab, with ½” reinforcing rebar centered at 4 inches and no closer than 4” from any edge, rebar spaced approximately 12” apart. Each block is approx. 1.25 cu yards and approx. 5,000lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.We expect to purchase between 8 and 48 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

3001 5 Each OPTION Concrete Block, 4' X 4' X 4' (3rd Opt Y)

FFP

A 4’x4’x4’ concrete cube. All vertical and horizontal edges will have no less than4” and no greater than 6” angle iron approximately 10 gage thickness welded together to protect the edges and corners. ½” rebar will be placed in the concrete in a grid pattern, spaced approximately 10” apart and no closer than 4” from any edge. Each block would be approx. 2.37 cubic yards or approx. stacked on ground with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain USG property. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be reutilized on site if available howeverthe USG is not required to maintain on hand these materials. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 0 and 5 per year .

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

3002 7 Each OPTION Concrete Block, 5' X 10' X 6" (3rd Opt)

FFP

. A 5’x10’x6” concrete slab. All vertical and horizontal edges will have no less than approximately 3 inch angle iron approximately 10 gage thickness welded together to protect all the edges and corners; this will have the effect of covering the edges which will work for this application. It will have ½” reinforcing rebar no closer than 4” from any edge, rebar spaced approximately 12” apart centered top to bottom of the 6 inch thickness. Each block is approx. .93 cu yards or approx.

3,720lbs per block. Concrete shall be flush with the outermost part of the angle iron frame. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. expect to purchae between 0 and 7 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

3003 270 Each OPTION Concrete Block, 42”x42”x4” (3rd Option)

FFP

A 42”x42”x4” concrete slab; with ½” reinforcing rebar centered at 2 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be a industry standard approved lifting cable inserted into the concrete to create a lifting point 8”wide by 8” high outside the concrete creating a U-Shape. Each block is approx. .16 cu yards or approx. 640lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

3004 270 Each OPTION Concrete Block, 42”x42”x6” (3rd Option)

FFP

A 42”x42”x6” concrete slab; with ½” reinforcing rebar centered at 3 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be an industry standard approved lifting cable type to create a lifting point 8” High by 8” wide outside the concrete creating a U-Shape. Each Block is approx. .27 cu yards and approx. 1,080lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

3005 48 Each OPTION Concrete Block, 5' X 10' X 8" (3rd Opt)

FFP

A 5’x10’x8” concrete slab, with ½” reinforcing rebar centered at 4 inches and no closer than 4” from any edge, rebar spaced approximately 12” apart. Each block is approx. 1.25 cu yards and approx. 5,000lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.We expect to purchase between 8 and 48 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

4001 5 Each OPTION Concrete Block, 4' X 4' X 4' (4th Opt Y)

FFP

A 4’x4’x4’ concrete cube. All vertical and horizontal edges will have no less than4” and no greater than 6” angle iron approximately 10 gage thickness welded together to protect the edges and corners. ½” rebar will be placed in the concrete in a grid pattern, spaced approximately 10” apart and no closer than 4” from any edge. Each block would be approx. 2.37 cubic yards or approx. stacked on ground with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain USG property. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be reutilized on site if available howeverthe USG is not required to maintain on hand these materials. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 0 and 5 per year .

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

4002 7 Each OPTION Concrete Block, 5' X 10' X 6" (4th Opt)

FFP

. A 5’x10’x6” concrete slab. All vertical and horizontal edges will have no less than approximately 3 inch angle iron approximately 10 gage thickness welded together to protect all the edges and corners; this will have the effect of covering the edges which will work for this application. It will have ½” reinforcing rebar no closer than 4” from any edge, rebar spaced approximately 12” apart centered top to bottom of the 6 inch thickness. Each block is approx. .93 cu yards or approx.

3,720lbs per block. Concrete shall be flush with the outermost part of the angle iron frame. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. expect to purchae between 0 and 7 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

4003 270 Each OPTION Concrete Block, 42”x42”x4” (4th Option)

FFP

A 42”x42”x4” concrete slab; with ½” reinforcing rebar centered at 2 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be a industry standard approved lifting cable inserted into the concrete to create a lifting point 8”wide by 8” high outside the concrete creating a U-Shape. Each block is approx. .16 cu yards or approx. 640lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

4004 270 Each OPTION Concrete Block, 42”x42”x6” (4th Option)

FFP

A 42”x42”x6” concrete slab; with ½” reinforcing rebar centered at 3 inches, no closer than 4” from any edge, rebar spaced approximately 12” apart. There will be an industry standard approved lifting cable type to create a lifting point 8” High by 8” wide outside the concrete creating a U-Shape. Each Block is approx. .27 cu yards and approx. 1,080lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift. We expect to purchase between 5 and 270 per year.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

4005 48 Each OPTION Concrete Block, 5' X 10' X 8" (4th Opt)

FFP

A 5’x10’x8” concrete slab, with ½” reinforcing rebar centered at 4 inches and no closer than 4” from any edge, rebar spaced approximately 12” apart. Each block is approx. 1.25 cu yards and approx. 5,000lbs per block. Blocks can be stacked when delivered however must include seperating timbers, pallets, etc between each block.with industry standard timbers, dunnage, pallets, etc. supplied by vendor that remain onsite. The stacking material must withstand the elements and allow for use of a fork lift to fit forks under or between blocks for lifting. Stacking material may be returned to vendor when no longer needed by activity for future deliveries if available however the USG is not required to maintain on hand these materials, nor required to return them to the vendor. Unloading can be provided by USG by means of a fork lift.We expect to purchase between 8 and 48 per year.

FOB: Destination

DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND ORDER VALUE

The minimum quantity and order value for each Delivery/Task Order issued shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for each Delivery/Task Order issued shall not exceed the maximum quantity and order value stated in the following table.

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

$3,500.00 $149,000.00

CLIN MINIMUM/MAXIMUM QUANTITY AND CLIN VALUE

The minimum quantity(s) and CLIN value(s) for all orders issued against the CLIN(s) on this contract shall not be less than the minimum quantity(s) and CLIN value(s) stated in the following table. The maximum quantity(s) and CLIN value(s) for all orders issued against the CLIN(s) on this contract shall not exceed the maximum quantity(s) and CLIN value(s) stated in the following table.

CLIN

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

0001 0.00 5.00 0002 0.00 7.00 0003 0.00 270.00 0004 0.00 270.00 0005 0.00 48.00 1001 0.00 5.00 1002 0.00 7.00 1003 0.00 270.00 1004 0.00 270.00 1005 0.00 48.00 2001 0.00 5.00 2002 0.00 7.00 2003 0.00 270.00 2004 0.00 270.00 2005 0.00 48.00 3001 0.00 5.00 3002 0.00 7.00 3003 0.00 270.00 3004 0.00 270.00 3005 0.00 48.00 4001 0.00 5.00 4002 0.00 7.00 4003 0.00 270.00 4004 0.00 270.00 4005 0.00 48.00

CLIN DELIVERY/TASK ORDER MINIMUM/MAXIMUM QUANTITY AND CLIN ORDER VALUE

The minimum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not be less than the minimum quantity and order value stated in the following table. The maximum quantity and order value for the given Delivery/Task Order issued for this CLIN shall not exceed the maximum quantity and order value stated in the following table.

CLIN

MINIMUM

QUANTITY

MINIMUM

AMOUNT

MAXIMUM

QUANTITY

MAXIMUM

AMOUNT

5.00

7.00

270.00

48.00

Section D - Packaging and Marking

CLAUSES INCORPORATED BY FULL TEXT

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD- 130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any items for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.

(End of clause)

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 1003 Destination Government Destination Government 1004 Destination Government Destination Government 1005 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 2003 Destination Government Destination Government 2004 Destination Government Destination Government 2005 Destination Government Destination Government 3001 Destination Government Destination Government 3002 Destination Government Destination Government 3003 Destination Government Destination Government 3004 Destination Government Destination Government 3005 Destination Government Destination Government 4001 Destination Government Destination Government 4002 Destination Government Destination Government 4003 Destination Government Destination Government 4004 Destination Government Destination Government 4005 Destination Government Destination Government

CLAUSES INCORPORATED BY REFERENCE

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 252.246-7000 Material…