DSTOFAC_Detailed_Plan.pdf

UNCLASSIFIED

4th Infantry Division

4ID DSTOFAC

Front Back

Foyer Right

Left

Steel lining of ¼ inch steel plate continuously welded

DSTOFAC– LINE DRAWING: WALLS

Foyer

6.2. Exterior: 1.The exterior of the deployable / tactical SCIF will be equal to a standard International Organization for Standardization (ISO) 20ft x 8ft x 8ft 6inch shipping container. 2.The exterior container should be tan in color utilizing the CARC (Chemical Agent Resistant Coating) process and retain all placard markings and serial numbers. 3.The container will be supplied with no windows. 4.The SCIF will be designed with the exterior ISO shipping container doors as the exterior doors. Inside the front exterior doors, a secure wall will be constructed to provide a secure SCIF access interior door, resulting in a small “foyer”. Inside the rear exterior doors, a solid secure wall will be constructed to support the integration of HVAC, power & communication junction boxes and ventilation.

6.3 Interior Ceiling, Floor, & Walls 1.The container should be lined with ¼-inch steel plate, continuously welded to form the interior ceiling, floor, & walls. 2.Inside the steel lining of the container will be framed consisting of studs, insulation, and two layers of 5/8-inch sheet rock on the walls and ceiling. Each layer of sheet rock will be taped to improve audio security of the facility. The walls and ceiling will be finished with a paint, neutral in color and complimentary to the floor and office environment. Constructed to provide sound attenuation per DCID 6/9 sound group 3.

3.The floor will be constructed with a single layer 3/4-inch sheet of plywood and finished with standard linoleum flooring neutral in color (not white) complimentary to an office environment. 4.The electrical and network receptacles will be flush with the finished wall and enclosed with appropriate wall plates, complimentary to the wall color.

6.4 Doors, Frames and Hardware 1.Centered inside the front exterior door of the container will be a secure wall with a door made of a solid wood core, encased with 16-gage steel, creating an interior SCIF access door. 2.The SCIF access door will be secured with a CDX-10 combination door lock and a simplex single pin access mechanical push button lock. The door will also be supplied with the appropriate sound seals and drop seals to provide audio protection. This door will be fit in a steel frame that will have a ¼-inch steel plate on its inside for added physical security. 3.The mobile / tactical SCIF will be fully compliant with DCID 6/9 requirements for construction, sound attenuation, doors, vents, ducts and pipes.

Presenter Presentation Notes

6.2. Exterior:

The exterior of the deployable / tactical SCIF will be equal to a standard International Organization for Standardization (ISO) 20ft x 8ft x 8ft 6inch shipping container.

The exterior container should be tan in color utilizing the CARC (Chemical Agent Resistant Coating) process and retain all placard markings and serial numbers.

The container will be supplied with no windows.

The SCIF will be designed with the exterior ISO shipping container doors as the exterior doors. Inside the front exterior doors, a secure wall will be constructed to provide a secure SCIF access interior door, resulting in a small “foyer”. Inside the rear exterior doors, a solid secure wall will be constructed to support the integration of HVAC, power & communication junction boxes and ventilation.

6.3 Interior Ceiling, Floor, & Walls

The container should be lined with ¼-inch steel plate, continuously welded to form the interior ceiling, floor, & walls.

Inside the steel lining of the container will be framed consisting of studs, insulation, and two layers of 5/8-inch sheet rock on the walls and ceiling. Each layer of sheet rock will be taped to improve audio security of the facility. The walls and ceiling will be finished with a paint, neutral in color and complimentary to the floor and office environment. Constructed to provide sound attenuation per DCID 6/9 sound group 3.

The floor will be constructed with a single layer 3/4-inch sheet of plywood and finished with standard linoleum flooring neutral in color (not white) complimentary to an office environment.

The electrical and network receptacles will be flush with the finished wall and enclosed with appropriate wall plates, complimentary to the wall color.

6.4 Doors, Frames and Hardware

Centered inside the front exterior door of the container will be a secure wall with a door made of a solid wood core, encased with 16-gage steel, creating an interior SCIF access door.

The SCIF access door will be secured with a CDX-10 combination door lock and a simplex single pin access mechanical push button lock. The door will also be supplied with the appropriate sound seals and drop seals to provide audio protection. This door will be fit in a steel frame that will have a ¼-inch steel plate on its inside for added physical security.

The mobile / tactical SCIF will be fully compliant with DCID 6/9 requirements for construction, sound attenuation, doors, vents, ducts and pipes.

4th Infantry Division

HVAC

CIRCUIT BREAKER PANEL

MAIN

POWER

CONNECT

/ RELAY

SWITCH

LEGEND

- Lights

- Camera

- Electric receptacle

- Light Switch

- Power Line

- Alarm control

- Horn

LIGHT LIGHTFront Back

Battery Back up 20A

20A

20A

20A

20A 20A

20A

20A

20A

20A

20A

20A

20A

75A

H

H

DSTOFAC– LINE DRAWING: ELECTRICAL WIRING

6.5 Electrical Distribution System

1. The electrical system will need to be able to hook into generated or commercial power 110-120v / 50-60hz and 220-240v / 50-60 hz systems in order to operate in various power conditions and operating environments.

2. The SCIF will be provided with an electrical distribution system. This system will consist of an electrical panel with a 400-amp main breaker connected.

3. The distribution box will connect to an interior circuit panel which will house the breakers for each circuit.

4. The SCIF needs to be provided with a military style Lex mobile power distribution box rated at 200 amps to be used when only generator power is available.

5. The HVAC needs to be on its own breaker rated per the manufacturer.

6. All wall mounted receptacles will be on their own 20-amp rated breaker and will be flush with the finished walls and enclosed with appropriate wall plates, complimentary to the wall color.

7. Wall mounted receptacles will consist of four outlets per receptacle. They will be installed: Right wall - four (4) total. One

(1) mounted just below each desk, one (1) mounted between the two desks and one (1) mounted towards the rear wall but still on the right wall to support the communication rack. Rear wall – one (1) total, centered above the shelves. Left Wall – Two (2) total. One (1) just below the desk and the other mounted towards the rear wall but still on the left wall, aligned with the one on the right wall to support the communication rack. Front wall – placed to support the video monitoring/recording equipment.

Presenter Presentation Notes

6.5 Electrical Distribution System

1. The electrical system will need to be able to hook into generated or commercial power 110-120v / 50-60hz and 220-240v / 50-60 hz systems in order to operate in various power conditions and operating environments.

2. The SCIF will be provided with an electrical distribution system. This system will consist of an electrical panel with a 400-amp main breaker connected.

3. The distribution box will connect to an interior circuit panel which will house the breakers for each circuit.

4. The SCIF needs to be provided with a military style Lex mobile power distribution box rated at 200 amps to be used when only generator power is available.

5. The HVAC needs to be on its own breaker rated per the manufacturer.

6. All wall mounted receptacles will be on their own 20-amp rated breaker and will be flush with the finished walls and enclosed with appropriate wall plates, complimentary to the wall color.

7. Wall mounted receptacles will consist of four outlets per receptacle. They will be installed: Right wall - four (4) total. One (1) mounted just below each desk, one (1) mounted between the two desks and one (1) mounted towards the rear wall but still on the right wall to support the communication rack. Rear wall – one (1) total, centered above the shelves. Left Wall – Two (2) total. One (1) just below the desk and the other mounted towards the rear wall but still on the left wall, aligned with the one on the right wall to support the communication rack. Front wall – placed to support the video monitoring/recording equipment.

4th Infantry Division

4ID DSTOFAC

Front Back

DESK 1 DESK 2

DESK 3

DSTOFAC– LINE DRAWING: DESK PLACEMENT

6.12 Desk, Chairs, Bookcase

1.The interior of the mobile / tactical SCIF will accommodate three personnel and office equipment comfortably.

2.Installed on the interior walls will be three (3) drop down custom tables with a 2-inch diameter hole drilled in the top, closest to the wall, to allow for power and network cabling to run through the table top.

3.Three (3) tables will be 60-inches in length.

4.One (1) book case will be supplied.

5.Three (3) desk chairs will be supplied.

6.One (1) printer stand will be supplied.

Presenter Presentation Notes Desk, Chairs, Bookcase

1. The interior of the mobile / tactical SCIF will accommodate three personnel and office equipment comfortably.

2. Installed on the interior walls will be three (3) drop down custom tables with a 2-inch diameter hole drilled in the top, closest to the wall, to allow for power and network cabling to run through the table top.

3. Three (3) tables will be 60-inches in length.

4. One (1) book case will be supplied.

5. Three (3) desk chairs will be supplied.

6. One (1) printer stand will be supplied.

4th Infantry Division

DESK 1 DESK 2

DESK 3

PA

TC

H

PA

N

EL

37” Televison

HVAC

CIRCUIT

BREAKER

PANEL

MAIN

POWER

CONNEC

T /

RELAY

SWITCH

A lar m

LEGEND

- NIPRnet - Light Switch

- SIPRnet - Alarm Control

- JWICS - Power

- Other network

- LIGHT

- CAMERA

- ELECTRIC RECEPTICAL

2 DRAWER

SAFE

20” CAM

ERA M

O N

ITO

R

VIDEO

RECORDER

SW

box 1

SW

BX 2

PRINTER

STAND

AND

SHELVES

Front Back

4ID DSTOFAC

H

LIGHT LIGHT

DSTOFAC– LINE DRAWING: COMPLETE OVERVIEW

4th Infantry Division DSTOFAC– LINE DRAWING: NIPR WIRING

LEGEND

- NIPRnet - Light Switch

- SIPRnet - Alarm Control

- JWICS - Power

- Other network

- LIGHT

- CAMERA

- ELECTRIC RECEPTICAL

DESK 1 DESK 2

DESK 3 SW

BX 2

PA

EL

PRINTER

STAND

AND

SHELVES

HVAC

CIRCUIT

BREAKER

PANEL

MAIN

POWER

CONNEC

T /

RELAY

SWITCH

A lar m

2 DRAWER

SAFE

VIDEO

RECORDER

LIGHT LIGHTFront Back

4ID DSTOFAC

H 20” CAM

ERA M

O N

ITO

R

4th Infantry Division

DESK 1 DESK 2

DESK 3 SW

BX 2

PA

EL

PRINTER

STAND

AND

SHELVES

HVAC

CIRCUIT

BREAKER

PANEL

MAIN

POWER

CONNEC

T /

RELAY

SWITCH

A lar m

2 DRAWER

SAFE

VIDEO

RECORDER

LIGHT LIGHTFront Back

4ID DSTOFAC

H 20” CAM

ERA M

O N

ITO

R

DSTOFAC– LINE DRAWING: SIPR WIRING

LEGEND

- NIPRnet - Light Switch

- SIPRnet - Alarm Control

- JWICS - Power

- Other network

- LIGHT

- CAMERA

- ELECTRIC RECEPTICAL

4th Infantry Division

DESK 1 DESK 2

DESK 3 SW

BX 2

PA

EL

PRINTER

STAND

AND

SHELVES

HVAC

CIRCUIT

BREAKER

PANEL

MAIN

POWER

CONNEC

T /

RELAY

SWITCH

A lar m

2 DRAWER

SAFE

VIDEO

RECORDER

LIGHT LIGHTFront Back

4ID DSTOFAC

H 20” CAM

ERA M

O N

ITO

R

DSTOFAC– LINE DRAWING: JWICS WIRING

LEGEND

- NIPRnet - Light Switch

- SIPRnet - Alarm Control

- JWICS - Power

- Other network

- LIGHT

4th Infantry Division

DESK 1 DESK 2

DESK 3

SW

BX 1 PA

EL

PRINTER

STAND

AND

SHELVES

HVAC

CIRCUIT

BREAKER

PANEL

MAIN

POWER

CONNEC

T /

RELAY

SWITCH

A lar m

2 DRAWER

SAFE

VIDEO

RECORDER

LIGHT LIGHTFront Back

4ID DSTOFAC

H 20” CAM

ERA M

O N

ITO

R

DSTOFAC– LINE DRAWING: OTHER NETWORK WIRING

LEGEND

- NIPRnet - Light Switch

- SIPRnet - Alarm Control

- JWICS - Power

- Other network

- LIGHT

4th Infantry Division DSTOFAC– LINE DRAWING: VIDEO WIRING

DESK 1 DESK 2

DESK 3

SW

BX 1

SW

BX 2

PA

EL

24” MONITOR

PRINTER

STAND

AND

SHELVES

HVAC

CIRCUIT

BREAKER

PANEL

MAIN

POWER

CONNEC

T /

RELAY

SWITCH

A lar m

2 DRAWER

SAFE

VIDEO

RECORDER

LIGHT Front Back

H 20” CAM

ERA M

O N

ITO

R

LEGEND

- NIPRnet - Light Switch

- SIPRnet - Alarm Control

- JWICS - Power

- Other network - Audible Horn

- LIGHT

- CAMERA

- ELECTRIC RECEPTICAL

6.7 Video Monitoring / Recording System

1.The completed system will be provided with a color, all weather day/night video camera mounted in the “foyer” exterior to the interior entrance SCIF door but inside the outside container door. The camera will feed video to an interior video recorder with a wall mounted 24” color monitor for live viewing located on the same inside front wall, in such a position it can easily viewed from each desk.. Both mounted on the inside SCIF door.

6.8 Alarm System

1. The completed system will be provided with a dual zone 128-bit encrypted alarm system. The system will be capable of being monitored via standard telephone line (RJ-11) and CAT-5 (RJ-45) connections.

2. The system will monitor one (1) door contact and one (1) motion detector. The motion detector will be mounted on an interior wall or ceiling, in a manner that will provide full coverage to the SCIF.

3. The control panel will be capable of monitoring locally and remotely when attached by telephone line and CAT-5 cable and located just inside the interior door above the light switch and exhaust fan control.

4. All power and communication lines will be dedicated for the alarm and will have an emergency battery back up to ensure continued service during the loss of power.

5. When activated it will alert guard station and sound an audible alarm.

H

Presenter Presentation Notes

6.7 Video Monitoring / Recording System

1. The completed system will be provided with a color, all weather day/night video camera mounted in the “foyer” exterior to the interior entrance SCIF door but inside the outside container door. The camera will feed video to an interior video recorder with a wall mounted 24” color monitor for live viewing located on the same inside front wall, in such a position it can easily viewed from each desk.. Both mounted on the inside SCIF door.

6.8 Alarm System

1. The completed system will be provided with a dual zone 128-bit encrypted alarm system. The system will be capable of being monitored via standard telephone line (RJ-11) and CAT-5 (RJ-45) connections.

2. The system will monitor one (1) door contact and one (1) motion detector. The motion detector will be mounted on an interior wall or ceiling, in a manner that will provide full coverage to the SCIF.

3. The control panel will be capable of monitoring locally and remotely when attached by telephone line and CAT-5 cable and located just inside the interior door above the light switch and exhaust fan control.

4. All power and communication lines will be dedicated for the alarm and will have an emergency battery back up to ensure continued service during the loss of power.

5. When activated it will alert guard station and sound an audible alarm.

4th Infantry Division

CONNEX DOORS CLOSED CONNEX DOORS OPEN

Light Switch (External light)

X10 Combination Lock

Single Pin Cipher Lock

VideoSecu CCTV Home Surveillance Outdoor IR Bullet Security Camera Color CCD Day Night 24 Infrared LEDs with Bonus Power Supply IR24W C2M

Steel Tamper Plate Affixed to the exterior wall.

Outdoor Metal Framed Light.

H

DSTOFAC– LINE DRAWING: OUTSIDE; FRONT

4th Infantry Division

IDS

PATCH

PANEL

Network

PATCH

PANEL

Wall Mount Ductless Mini Split

Air Conditioner Heat Pump 208-

230V

Power Input Panel 400A, 3 Phase dual

110-120/ 208-240VAC

50-60hz that connects to LEX 200 Amp Military Style Lex Mobile Power Distribution Box

CONNEX DOORS CLOSED CONNEX DOORS OPEN

Air Exchange system in accordance with 29 CFR1910.146(c)(5)(i)(A) through (F)

LEX 200 Amp Military Style Lex Mobile Power Distribution Box

DSTOFAC– LINE DRAWING: OUTSIDE; BACK

6.10. HVAC

1. The system will be supplied with a fully self-contained HVAC system in order to provide air conditioning and heat to the SCIF. The system will be a mini split pack type. The interior coil will mount within the SCIF on the left side and provide air circulation and temperature control.

2. The temperature control switch/remote will be wall mounted on the left wall, to the right of the desk.

3. The exterior condensing unit will be mounted in the rear “Foyer” of the container between the interior wall and the exterior container door. The components will be connected via suction and liquid lines. These lines will have dielectric breaks installed per DCID 6/9 requirements.

4. The HVAC will also have an integral heat pump system.

5. The HVAC systems will be on its own breaker

Presenter Presentation Notes

6.10. HVAC

1. The system will be supplied with a fully self-contained HVAC system in order to provide air conditioning and heat to the SCIF. The system will be a mini split pack type. The interior coil will mount within the SCIF on the left side and provide air circulation and temperature control.

2. The temperature control switch/remote will be wall mounted on the left wall, to the right of the desk.

3. The exterior condensing unit will be mounted in the rear “Foyer” of the container between the interior wall and the exterior container door. The components will be connected via suction and liquid lines. These lines will have dielectric breaks installed per DCID 6/9 requirements.

4. The HVAC will also have an integral heat pump system.

5. The HVAC systems will be on its own breaker

4th Infantry Division

7110-01-029-8055 | Multi-Lock Class 6, 2 Drawer File Cabinet, Black - Kaba Mas X-10 28¼"��H x 19¼"��W x 28"D

20” Camera Monitor

VIDEO

RECORDER

Alarm Control Keypad

Light Switch (internal lights)

Exhaust Fan Control

4ID DSTOFAC

Emergency Battery Back up Light

DSTOFAC– LINE DRAWING: INSIDE FRONT

MOTION

SENSOR

4th Infantry Division

Network Patch Panel

IDS Patch Panel

SIPRnet

JWICS

Encryptor

2 x Fibre to coper Media Converter

NIPRnet

OTHER SWITCH

2 x Encryptors

Fibre to coper Media Converter

PRINTER STAND

AND SHELVES

SIPRnet PATCH PANEL

OTHER PATCH PANELJWICS PATCH PANEL

NIPRnet PATCH PANEL

DSTOFAC– LINE DRAWING: INSIDE; BACK

4th Infantry Division

DESK 1 DESK 2

JWICS

Encryptor

2 x Fibre to coper Media Converter

NIPRnet

JWICS PATCH PANEL

NIPRnet PATCH PANEL

DSTOFAC– LINE DRAWING: INSIDE RIGHT

4th Infantry Division

DESK 3

(14 individual circuit breakers)

CIRCUIT

BREAKER

PANEL

HVAC

SIPRnet

OTHER SWITCH

2 x Encryptors

Fibre to coper Media Converter

SIPRnet PATCH PANEL

OTHER PATCH PANEL

DSTOFAC– LINE DRAWING: INSIDE LEFT