Salient Characteristics.pdf

517 KB Posted

Attached to
Combined Synopsis/Solicitation for Connector, Plug, Electrical
Solicitation number
W911N2-25-Q-8811
Issued by

About this file

Written by GovTribe AI ·

This document is a Technical Requirements specification from the Department of the Army's Letterkenny Army Depot for a Miniature Rectangular Connector (part number 00-850-0471). The specification details two connector types: a -50 connector with 0.062 diameter gold-plated brass pin contacts rated at 13 amps, and an -8 connector with 0.93 diameter gold-plated brass pin contacts rated at 20 amps. The connectors must meet MIL-C-28748 performance requirements, have a dielectric withstanding voltage of 1000 VAC at sea level, use grey glass-filled diallyl phthalate as the dielectric material, and feature Phosphor Bronze guides. The document includes detailed dimensional drawings and specifies mounting holes for No. 4 machine screws, with a suggested source of MRA508SGH8:81312.

View the file

Other files

File Type Posted
Combined Synopsis and Solicitation W911N225Q8811_KO Approved.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DEPARTMENT OF THE ARMY

LETTERKENNY ARMY DEPOT

1 OVERCASH AVENUE

CHAMBERSBURG, PA 17201

AMLD-PED 15 September 2025

TECHNICAL REQUIREMENTS FOR MINIATURE RECTANGULAR CONNECTOR 00-850-0471.

The connector will have the characteristics listed as follows:

-50, 0.062 diameter, gold plated brass pin contacts with 0.070 diameter solder cup termination.

The current rating will be at a minimum of 13 amps -8, 0.93 diameter, gold plated brass pin contacts with 0.106 diameter solder cup termination.

The current rating will be at a minimum of 20 amps -The connector shall meet performance requirements of MIL-C-28748, the minimum dielectric withstanding voltage is one minute electrification 1000 VAC, at sea level.

-The dielectric material shall be grey glass filled diallyl phthalate, per MIL-M-14, SDG-F.

-Guides to be made of Phosphor Bronze.

The connector will have the dimensions listed below (figure is for reference only).

Suggested source MRA508SGH8:81312

Benjamin Barresi | Mechanical Engineer Engineering Support Branch AMCOM - Letterkenny Army Depot

File details come from the government source that posted it. Updated .