Solicitation Amendment W911KF25QA0090001 SF 30.pdf

PDF 3 MB Posted

Attached to
DC Torque Tool Maintenance, Calibration and Repair- Buildings 400 and 447
Solicitation number
W911KF25QA009
Issued by

About this file

This is a Standard Form 30 (SF 30) Amendment of Solicitation/Modification of Contract for a torque tool calibration and repair requirement issued by the Army Contracting Command at Anniston Army Depot. The amendment addresses two specific industry questions: (1) vendors must keep torque tools on-site for calibration and cannot remove them to an off-site facility, and (2) the government will maintain an internal tracking system updated weekly to manage calibration requirements and annual audit needs. The solicitation amendment (W911KF25QA009) is dated September 17, 2025, with a question submission deadline of September 22, 2025, at 5:00 PM CDT. The amendment follows ISO 17025 standard calibration protocols and maintains all other previously established contract terms and conditions.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.

If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Block 14 (Description of Amendment/Modification):

1. The purpose of this amendment is to answer industry questions.

2. Industry Questions:

Question 1#- Is the repair and calibrations required to be on site inside the facility on a daily basis (Monday-Thursday) or are we able to pick up the tools and repair and calibrate them at our facility?

Answer 1# - - Torque tools will need to remain on site to be calibrated.

Question 2#- If you require us to repair and calibrate onsite to the ISO 17025 standard, how do you handle the annual audit requirements?

Answer 2#- Internal tracking system in which the list is updated weekly to show upcoming calibration requirements.

3. The deadline for submitting all questions is September 22, 2025, at 5:00 PM CDT.

4. All other terms and conditions remain unchanged.

W911KF25QA0090001

IDCode: J
Page: 1
Pages: 2
AmendNo: 0001
EffDate: 17 SEP 2025
ReqNo:
ProjNo:
IssCode: W911KF
AdmCode:
IssuedBy: W6QK ACC ANAD

ACC ANNISTON ARMY DEPOT, 7 FRANKFORD AVE

ANNISTON, AL 36201-4199

UNITED STATES

ZENA JOHNSON, EMAIL: ZENA.S.JOHNSON.CIV@ARMY.MIL TELEPHONE: 520-669-6059

AdminBy:

SCD: PAS:

ContractorNameAdd:
Code:
FacCode:
SolChg: 1
SolNo: W911KF25QA009
SolDate: 09 SEP 2025
AwardChg: Off
AwardNo:
AwardDate:
Amended: 1
OffrExt: Off
OffrNoEx: 1
NoCopies: 1
ApprData: SEE CONTINUATION
ChgeOrd: Off
ChgeOrder:
Modify: Off
SuppAgre: Off
SuppAuth:
ModOthr: Off
OthrSpec:
NoReq: Off
Require: Off
Copies:
Descript: SEE SCHEDULE
ContNameTitle:
CoNameTitle: HEATHER P. ROBINSON
ContDate:
CODate: 15 SEP 2025

File details come from the government source that posted it. Updated .