SOW-DC_Torque_Tools.pdf

DESCRIPTION/WORK STATEMENT/SPECIFICATION

FOR

DC Torque Tool Maintenance, Calibration and Repair

1.0 Scope:

This specification establishes a requirement for Preventative Maintenance/Calibration and Emergency Repair of DC Torque Tools located at Anniston Army Depot, Anniston, Alabama. The DC Torque Tools covered in this contract are located in buildings 400 and 474. The maintenance coverage shall be for a one-year base period beginning with award of this contract, plus four (4) option years.

2.0 Maintenance Requirements:

2.1 Preventative Maintenance and Calibration:

The Contractor shall provide the Government annual preventative maintenance and yearly scheduled calibration support, prior to calibration expiration, in accordance with the OEM specifications for the DC Torque Tools located at Anniston Army Depot, Anniston, Alabama which includes but is not limited to:

A. Complete on-site tool evaluation and testing of all components and functions.

B. All serviceable parts will be disassembled and the functions tested with certified test equipment. All tools will be labeled with a current calibration date sticker.

C. Certificates of Calibration for each tool will be provided to Jerry Corby and the

COR within 1 week of calibration services being performed. Contact information for the above mentioned Government employees will be provided at the time of award.

D. All mechanical parts will be cleaned, inspected and re-greased.

E. Calibration of the electric tools will consist of making sure they fulfill the needs of a traceability chain using ISO 17025 international standards.

F. Minor on-site repairs will be included at the time of service and shall be billed as such in accordance to the terms and conditions of the contract.

2.2 Repair/Emergency repair:

A. Tools requiring significant repair shall be tagged and identified for corrective maintenance.

B. An on-site repair service shall be available for tools during regular work hours.

C. An emergency repair service shall be available during night and weekend shifts and holidays.

D. If any part of these requirement are out-sourced by the Contractor all requirements listed in this SOW applies.

E. Shipping/Transportation of any tools to and from the Contractor’s facility shall be the responsibility of the Contractor.

2.3 Tools to be serviced:

Desoutter 4 EM80-50J M1 Suspension assembly 08D40532: 08D40675; 08D40671; and

08D40670

Desoutter 6 EM80-30J M1 Suspension assembly 08D40595; 08D40597; 08D40591;

08D40588; 08D40592; and 08D40587

Desoutter 8 EME80-30J Stryker Suspension assembly 10D52008; 10D52009; 10D52010;

10D52011; 10D52012; 10D52014;

10D52015 and 10D52016

Desoutter 4 EME106-20J Stryker Suspension disassembly 11E53292; 11E53293; 11E53294 and

11E53243

Stanley 3 E33LA19-48 1790 Engine assembly facility 80707018; 80307008; and 80307009

Stanley 3 E33LA19-60 1790 Engine assembly facility 90807036; 90807035; and 90807034

Stanley 3 E44LA22-120 1790 Engine assembly facility 82207021; 82207022; and 90807003

Stanley 1 E33LA14-33 1790 Engine assembly facility 71207057

Stanley 4 E45MB2F1-160 1790 Engine assembly facility 80307023; 80307022; 92107017; and

92107016

Stanley 1 E12LA14-23 1790 Engine assembly facility 90707035

Stanley 2 E34MB1F1-100 1790 Engine assembly facility 90807002; and 90807001

Stanley 4 E34MD1S0016-90 1790 Engine assembly facility 91907005; 91907008; 91907007; and

91907006

Stanley 1 E34LB1-100 DC 1790 Engine assembly facility 91807016

Stanley 2 E34MB1F1-60 1790 Engine assembly facility 80707004; and 80707005

Stanley 2 E45MB3F1-250 1790 Engine assembly facility 80807001; and 80807002

Stanley 2 E55MB4F1-471 1790 Engine assembly facility 80907012; and 91207004

Stanley 1 E55LB3-322 1790 Engine assembly facility 81407016

Stanley 1 E55LB4-623 1790 Engine assembly facility 80707002

Brand Quanity Model Number Location Serial Numbers

3.0 Documentation of Malfunctions and Service Calls:

The Contractor shall furnish to the Government a service document which will be used to report the date and time of notification, along with a brief description of each malfunction reported to him. The Contractor shall furnish to the Government one copy of this report form upon completion of any corrective or preventive action taken by the Contractor. The report form shall include as a minimum the following:

A. Date and Time of Notification

B. Date and Time of Arrival

C. Time Spent for Repair

D. Description of Malfunction and/or Maintenance Performed

E. Description of Parts Replaced

4.0 Normal Period of Support (NPS):

The normal period of maintenance support shall be Monday through Thursday 0700-1630 hrs.

and 0700-1530 hrs. every other Friday. Maintenance support shall be made available to the Government during this period at a fixed hourly rate.

5.0 Support Outside Normal Period of Support (SONPS):

On-call emergency maintenance support shall be made available to the Government outside the Normal Period of Support (NPS) (including Federal holidays and weekends) at a fixed hourly rate (or rates), as specified in this contract.

6.0 Contractor’s Point of Contact:

The Contractor shall provide the Contracting Officer with a point of contact and a telephone number for the Government to report service calls, and shall make arrangements for qualified service personnel (e.g. qualified technician) to receive notification and respond to the Government within twenty-four hours. Telephone recording devices and/or voice-mail systems are acceptable. The Contracting Officer shall supply the Contractor with the name and telephone number of his/her designated technical representative. The COR is authorized to request maintenance support services. The Contractor shall not proceed with any verbal or written change(s) to the scope of work from sources other than the Contracting Officer, who will provide changes in writing.

7.0 Contractor Service Personnel:

The Contractor shall provide trained personnel, with the necessary expertise to perform all required technical support and emergency corrective maintenance services on the DC Torque Tools. Work shall be performed in accordance with best commercial practices without unnecessary delays or interference with Government missions or functions.

8.0 Response Remedies:

If, twenty-four (24) hours after the Contracting Officer or COR notifies the Contractor, the Contracting Officer determines that the contractor is not making continuous progress toward remedying any reported equipment malfunction, the Government shall reserve the right to secure the services of other commercial or Government qualified technicians to repair, replace, or otherwise correct the reported malfunction of the equipment at the Contractor’s expense.

9.0 Replacement Parts/Materials:

Replacement parts shall be supplied by the Contractor on a cost reimbursement basis as specified in this contract. Only new standard parts or parts refurbished equivalent to new, shall be used in effecting repairs. A discount on all parts and all upgrades shall be offered to the Government as part of this emergency on-call maintenance contract.

10.0 Warranty of Parts/Materials:

Parts/materials replaced under this contract will be subject to the standard commercial warranty applied to those parts or materials. Labor shall have at a minimum 30 days of warranty.

11.0 Surveillance/Communication:

All technical surveillance of on-call, on-site services will be performed by the Contracting Officer’s Representative. After correction of each malfunction, the Contractor shall notify the contract administrator named in this contract. Communication of all technical matters pertaining to this contract shall be in writing directly between the Contractor and the Contracting Officer, Anniston Army Depot, ATTN: AMSTA-AN-CTCS, 7 Frankford Avenue, Anniston, Alabama 36201-4199, with a copy furnished to the COR.

12.0 Contractor Responsibilities:

12.1 The Contractor shall provide all parts, tools, labor, documentation and materials necessary to perform the services required by the terms of this contract.

12.2 The offered shall include the following in his response to this request for proposals:

A. Hourly labor rate to be charged during the Service Outside Normal Period of Support (SONPS) for the base year and each one-year option.

B. Hourly labor rate to be charged during the Normal Period of Support (NPS) for the base year and each one-year option.

13.0 Contractor Manpower Reporting:

A. The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the Contractor will report ALL Contractor manpower (including subcontractor manpower) required for performance of this contract. The Contractor is required to completely fill in all the information in the format using the following web address:

https://contractormanpower.army.pentagon.mil. The required information includes:

(1) Contracting Office, Contracting Officer, COR;

(2) Contract number, including task and delivery order number;

(3) Beginning and ending dates covered by reporting period;

(4) Contractor name, address, phone number, e-mail address, identity of Contractor employee entering data;

(5) Estimated direct labor hours (including sub-contractors);

(6) Estimated direct labor dollars paid this reporting period (including sub-contractors);

(7) Total payments (including sub-contractors);

(8) Predominant Federal Service Code (FSC) reflecting services provided by Contractor (and separate predominant FSC for each sub-contractor if different);

(9) Estimated data collection cost;

(10) Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity (the Army Requiring Activity is responsible for providing the Contractor with its UIC for the purposes of reporting this information);

(11) Locations where Contractor and sub-contractors perform the work (specified by zip code in the United States and nearest city, country, when in an overseas location, using standardized nomenclature provided on website);

(12) Presence of deployment or contingency contract language; and

(13) Number of Contractor, and sub-contractor employees deployed in theater this reporting period (by country).

B. As part of its submission, the Contractor will also provide the estimated total cost (if any) incurred to comply with this reporting requirement. Reporting period will be the period of performance not to exceed 12 months ending September 30 of each government fiscal year and must be reported by 31 October of each calendar year.

Contractors may use a direct XML data transfer to the database server or fill in the fields on the website. The XML direct transfer is a format for transferring files from a Contractor's systems to the secure web site without the need for separate data entries for each required data element at the web site. The specific formats for the XML direct transfer may be downloaded from the web site.

14.0 Access and General Protection/Security Policy and Procedures:

A. This standard language is for Contractor employees with an area of performance within an Army-controlled installation, facility, or area. The Contractor and all associated subcontractors employees shall provide all information required for background checks to meet installation access requirements to be accomplished by the installation Provost Marshal Office, Director of Emergency Services, or Security office. The Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA, and/or local policy. In addition to the changes otherwise authorized by the change clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in Contractor security matters or processes.

B. For Contractors that do not require a Common Access Card (CAC), but require access to a DOD facility or installation. Contractor and all associated subcontractor employees shall comply with adjudication standards and procedures using the National Crime Information Center interstate identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05/AR 190-13), applicable installation, facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

C. If necessary, Contractor shall acquire and return all issued U.S. Government Common Access Cards, installation badges, and/or access passes.